XQH Quick Guide
QUICK GUIDE
XQH SERIES
PRO & LITE
Components
STEP 1
STEP 1
▶
Contents
Quick Guide
S/W
CD
▶
Remote
Controller
Rack Mount
(PRO Only)
Power Code
DC Adaptor
(LITE Only)
Software CD / Manual
XQH PRO Series
XQH LITE Series
USB Mouse
(Option)
Specification and appearance may be changed without prior notification.
notification.
!
Please, check the items supplied with your DVR System. Refer to the picture above and contact your local dealer if
you find anything is missing or damaged...
2
STEP 2
STEP 2
DVR Rear Connection Details (PRO Series)
Power Switch
Video In
(4/9/16 CH)
LAN
Port
Alarm In
Video Out
Serial
Port
USB
Port
VGA
Out
Alarm Out
RS 485
port
Factory
Reset
S-Video NT/PAL
Out
Select
Audio In
(1~4)
Power
Spot Out
(1, 2)
Audio Out
Ground
Please, pay attention to the correct polarity (+/-) when connecting Pan/Tilt.
Wrong wiring may cause the malfunction of DVR.
The maximum communication distance of RS 485 is about 1.2Km. However, it may also depend on the cable type and
quality
Devices that operate with electric lamp or AC should use the separate relay.
3
STEP 2
STEP 2
DVR Rear Connection Details (LITE Series)
Power Switch
Video In
(4/9/16 CH)
Video Out
Power In
DC 12V
System
FAN
Spot
Out
VGA
Out
Audio
Out
Audio In
(1~4)
Serial
Port
USB
Port
NT/PAL
Select
LAN
Port
Alarm In / Out
RS485
Port
Please, pay attention to the correct polarity (+/-) when connecting Pan/Tilt.
Wrong wiring may cause the malfunction of DVR.
The maximum communication distance of RS 485 is about 1.2Km. However, it may also depend on the cable type and
quality
Devices that operate with electric lamp or AC should use the separate relay.
4
STEP 3
STEP 3
Icon
DVR Remote Controller
Function
Hotkey
POWER ON / OFF
PLAY / PSUSE
Go to Last Search
STOP
Go to Live Screen
FAST REWIWD
First Search
FAST FORWARD
Last Search
STEP BACK
Calendar Search
STEP FORWARD
Event Search
Screen division
SEQUENCE
FREEZE
ZOOM
SETUP
BACKUP
COLOR
STATUS
▲▼ ◀ ▶
NAVI Button
MENU
ESC
RECORD
How to change Remote Controller ID
A) Press 'ID‘ button for 3 seconds
B) Power LED lightens.
C) Enter two digits. In (00 ~ 99) – 00 means no ID.
- ID should be selected from 01 to 99.
D) LED will go off after saving setting value.
E) The RC can be used with other DVRs with similar ID.
F) LED will blink every time any data is transferred.
5
STEP 4
STEP 4
DVR Starting and Shutting Down
System Start
• Connect the power adaptor to DVR.
• Turn on the power switch on the rear.
• Booting will take about 1 minute 30 seconds.
(It may take more if the network cable is not connected)
System Shutdown
• Select [SETUP > SYSTEM > SYSTEM SHUTDOWN] to
shutdown system.
• After pressing “OK” on the pop-up message switch off the power
on the rear of DVR.
6
STEP 5
STEP 5
DVR Monitoring Screen
1
2
1
Monitoring Screen : Provides the LIVE view from each DVR channel
<Screen Indication>
LeftUp : Camera Name, P – Pan/Tilt, A – Audio
RightUp : Record Mode (Blue-Normal, Red-Event) ,Motion Status
Central : Video Loss (No Signal), Hide Screen (Hidden Camera)
2
Status Bar : DVR Status Indication(Backup, HDD Usage, Current Time, Sequence, Freeze, Login Info etc.)
7
STEP 6
STEP 6
DVR Video Record
Record
Record
Setting Menu for Record.
Record Policy
Record
8
STEP 6
STEP 6
DVR Video Record
Setting Record
Record Policy
Select the Record Policy.
•Single Record
•Overwrite
Record Data Retention
Select Record Data Retention date from Disable to 365.
This feature only works when “Overwrite” option selected on
Record Policy.
Data Retention functions during:
System Booting, editing Setup, every midnight
Editing Time Settings or GMT
System Log registers the Record Data deleted during the Data
Retention.
9
STEP 6
STEP 6
DVR Video Record
Data deleted during the Data Retention can not be recovered.
Please double check your recording data before proceeding.
If you set the Data Retention date as 5, the Recorded Data available for search will be limited to 5 days
23 hours 59 minutes 59 seconds.
Data Retention volume should not exceed the capacity of the HDD installed on your DVR.
10
STEP 6
STEP 6
DVR Video Record
Record
Set up specific Record Type for each camera.
Resolution
There is 3 different resolution settings for each camera.
360*240(CIF), 720*240(HALF-D1), 720*480(D1)
Record Mode
Set up Record Mode.
NORMAL+EVENT.
NORMAL Record FPS/Record Quality
Menu Icon for setting Frame rates of Normal Record
and Quality
EVENT Record FPS/ Record Quality
Menu Icon for setting frame rates of Event Record and Quality.
Schedule
Set the week-based Schedule.
11
STEP 7
STEP 7
DVR Record Video Search
Search Screen
1
1
3
Playback Screen
: Record Playback
2
Playback Time
: Playback Time Display
3
Playback Status
Pause (II)
Play (▶)
Multiple Playback (▶ ▶, ▶ ▶ ▶, ▶ ▶ ▶ ▶)
2
It randomly shows the first searched record file when it goes to SEARCH MODE.
This type is the same as on Event Search, so it may possibly not show the exact
searched file.
12
STEP 7
STEP 7
DVR Video Record Search
SEARCH MENU
* Click Right button on mouse or push on MENU button to enter
DISPLAY
Select screen division mode.
1, 4, 9, 16
13
STEP 7
STEP 7
DVR Video Record Search
CALENDAR SEARCH
Select Date, Hour, Minutes, Seconds in turn on Calendar Search.
When you click MINUTE, you can find specific Record Status as right below.
14
STEP 8
STEP 8
DVR Video Record Backup
Backup Device
Search Backup device. (Select when you play the Backup Data.)
If there are various Backup devices you can select a specific one.
15
STEP 8
STEP 8
DVR Video Record Backup
Playback Toolbar
Toolbar as shown below can be controlled by mouse for easy Playback control.
Playback User Interface
Playback buttons appears when locate the mouse pointer at the bottom of screen.
16
STEP 9
STEP 9
Network Setup and Port Forwarding, DDNS Setting
Network
NETWORK
Set up various network items.
LAN
DDNS
17
STEP 9
STEP 9
Network Setup and Port Forwarding, DDNS Setup
1 LAN
Maximum User Number
Shows the maximum number of CLIENTs who can connect.
(Up to 4)
STATIC Type
Select when using STATIC IP.
All of IP, GATEWAY, NETMASK setting values should be set manually.
DHCP
Select during automatic DHCP IP.
User sets DNS only.
(only under DHCP Server Operating Mode)
18
STEP 9
STEP 9
Network Setup and Port Forwarding, DDNS Setup
ADSL (PPPoE
(PPPoE)
PPPoE)
When using ADSL line you will need to input the USER ID and P/W.
19
STEP 9
STEP 9
Network Setup and Port Forwarding, DDNS Setup
DDNS(Dynamic DNS)
USE
Select if you want DDNS.
This function enables you to connect to the Network in the Dynamic IP
environment.
SERVER
Select DDNS server.
EZDDNS : Specialized DDNS server
www.ezddns.com
DYNDNS: DDNS public server
Register Account and HOSTNAME in the Server to use the
DDNS Service.
HOSTNAME
HOSTNAME should be used at Dynamic IP environment instead of IP Address. HOSTNAME should match the Name registered on DDNS
server.”
(Ex. xqh-xqh.ezddns.com)
USER NAME / PASSWORD
Enter the ID and P/W registered in DDNS Server.
ROUTER
Check if NETWORK Environment is through Router or IP sharer.
It is recommended to use EZDDNS Server rather than DYNDNS which is not the optimized system.
20
STEP 9
STEP 9
Network Setup and Port Forwarding, DDNS Setup
2 Checking the Network Status and Info
Menu → Others → Status → Network
You may check the Network Setting Values which is registered
on DVR as shown in the picture.
MAC Address
: Be sure not to reveal the MAC address of the product..
IP
: This is the IP Address of the DVR.
NETMASK
: This is the NETMASK set up on the DVR.
GATEWAY
: This is the GATEWAY set up on the DVR.
DNS
: This is the DNS set up on the DVR.
DDNS
: This is the DDNS set up on the DVR .
CLIENT INFOMATION
: This is the CLIENT INFO linked to the DVR.
21
STEP 9
STEP 9
Network Setup and Port Forwarding, DDNS Setup
3 EZDDNS Homepage Registration
Server
- The Server Address is www.ezddns.com .
- Please select English.
Initial Display
: This will take you back to the EZDDNS Homepage .
Member Registration
: This can be used only if you already registered your ID,
P/W and E-mail..
Canceling Membership
: Enter your ID and P/W, delete the Membership Info
to cancel your Membership from EZDDNS.
Password Confirmation
: You may check your password by entering the ID and
E-mail address used for the Member registration.
LOGIN
: Enter your ID and P/W to Login.
Korean / English
: Select the language of use of EZDDSN.
22
STEP 9
STEP 9
Network Setup and Port Forwarding, DDNS Setup
4 Host Registration and Management
Registering New Hostname
: After selecting New Host Registration, enter any desired name
like “xqh” and click on “Create”.
Please use Numbers or Alphabet to register the new name.
List Hostname
: Check the Host Link after Hostname registration.
Delete : The registered Hostname can be deleted.
Xqh-xqh.ezddns.com
: This is the Hostname registered in the Host List.
A : 0.0.0.0
: This is the Port Forwarding IP Address.
The reason why IP Address appears as A : 0.0.0.0 is because
the Port Forwarding was not done properly. In order to use
DDSN you must set up Port Forwarding from IP Sharer.
23
STEP 9
STEP 9
Network Setup and Port Forwarding, DDNS Setup
5 Port Forwarding
Description of Port Forwarding:
Refers to the change of destination address and/or port on the
packet with subsequent regular routing in a network address
translator gateway to reach a host within a masqueraded,
typically private, network based on the port number on which it
was received from the originating host.
For example, if you enter www.google.com , you will always be
forwarded to the GOOGLE homepage.
Port Forwarding method:
1. Check the current IP Info on the DVR
: STEP9 – Refer to ②.
Terms use for the Server may differ according to the
manufacturer.
Terms like Port Forwarding, Port Forward, Virtual Server
Settings can be seen. For the related questions please refer to
your Server Manual or contact the manufacturer.
The IP Sharer of this product is ipTIME N604M.
2. Register the confirmed IP Info on the LAN Settings of DVR
: STEP9 – Refer to ① .
3. Input in the DVR the registration Info from DDNS homepage.
: STEP9 – Refer to ⑦.
4. Connect to IP Sharer to set up the Port Forwarding
: STEP9 – Refer to ⑤, ⑥ .
24
STEP 9
STEP 9
Network Setup and Port Forwarding, DDNS Setup
6 Port Forwarding
Port Forwarding Method for Port 80
1. Port Forwarding Name
: Designate the Port Forwarding Name for service.
(Ex. : XQH Web)
2. Enter Internal IP Address
: Connect DVR with LAN cable and enter the IP Address of
Network Status as shown in the left picture: 192.168.10.94
3. Input the Internal & External Ports
: Set up the Internal and External Ports which should further be
connected to Internal Address.
4. New Port Added
: Finally, click on the ADD button to complete the Port
Forwarding for Port 80.
Port 80
: The correctness of Port Forwarding for the Port 80 can be
confirmed at IP Address No.: 192.168.10.94
To view the XQH thru Web please perform the Port forwarding
for the Port 80.
9013 Port is used at XQRemote, XQSearch and XQCMS.
Confirmation of Port Forwarding Setup at EZDDNS homepage
: On the left picture the IP Address like A : 175.197.46.91 will
appear confirming that Setup was completed properly.
If the IP Address appears in form of A : 0.0.0.0, the LAN,
DDNS and Port Forwarding Settings should be checked again.
25
STEP 9
STEP 9
Network Setup and Port Forwarding, DDNS Setup
7 DDNS 설정
Description of DDNS
: Dynamic IP environment that allows Network access.
Use : Select if you need DDNS.
Server : Select DDNS Server.
EZDDNS : Specialized DDNS operated by manufacturer
www.ezddns.com
DYNDNS: Free DDNS Server
In order to use DDNS Server, first the User Account and
Hostname should be registered in the Server.
HOSTNAME should be entered in full as shown in the
picture “xqhxqh-xqh.ezddns.com.
xqh.ezddns.com
HOSTNAME
: Username of IP Address on Dynamic IP environment. It is the
same Name registered on DDNS Server.
Username/Password: Type in the Username and P/W
registered on DDNS Service.
Router : Select “YES” to use the Router or IP Sharer.
As DYNDNS is not optimized system it is recommended
to use EZDDNS Server.
26
Product Warranty
Product Name
Model
Serial No.
Date of Purchase
Dealer
Phone
Address
Customer Name
Phone
Address
Warranty Period – 2 YEARS
As warranty period is counted from the date of purchase, it is recommended that you get the date of purchase to be written.
(If you are not sure about the date of purchase, the warranty period is counted from the date when six months are passed
from the date of manufacture.)
Free Service
We will recompense in accordance with free service or Consumer Damage Compensation, Ministry of Finance and
Economy’s Notification, in case there is any failure of performance or function, which occurred naturally under normal use of
product within two years (warranty period) after purchasing the product.
.
Pay Service
1. In case of failure due to consumer’s mistake
-in failure due to the careless handling, repair or conversion of the consumer
-in failure due to the repair by unqualified person instead of dealer or service center engineer
-in failure or damage due to falling or such things during relocating after installing
-in failure due to abnormality of used power or inferiority of the networks and apparatus that is attached to this product
2. In case of other reasons such as disasters (fire, salt damage, flood, landslide, etc.)
27
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising