Single and Mixing Bedpan Cleansers

Single and Mixing Bedpan Cleansers
Single and Mixing
Bedpan Cleansers
Specification: (example)
• Cast brass, volume control valve
• Integral stop, polished chrome plated finish
• Tuf-Teck institutional structure
• Color indexed, 70mm (2-3/4'') ADA compliant
lever blade handle
• Vandal resistant handle screw, rigid wall spout,
spray bedpan outlet, insulated bent tube and handle
• 1500mm (59'')reinforced hose and hanger,
with stop
and … with … (add control required)
with … (add spout required)
with … quick disconnect (add suffix QD
if required - See Back Page)
Specification: (example)
• Wallhung, forged brass
• Self close foot pedal valve, aluminum pedal,
integral inlet/outlet stops, polished chrome plated finish
• Rigid wall spout, spray bedpan outlet, insulated bent
tube and handle
• 1500mm (59'') reinforced hose and hanger,
with stop
and … with … single or double valve, (as required)
with … (add spout required)
54T1354A
Engineer/Architect Approval
Model Specified:
Approval:
DESCRIPTION
Volume Control Valves
54T1
PRODUCT NO.
1&2
4
Foot Pedal Valves Only
54T1
3&4
4
CONTROL
Date:
A
OUTLET
SPOUT
✔
0
✔
0
Use “0” in this
column ONLY when
Control “1” Specified
✔
0
1
Wallmounted Valve,
Double-check
Vacuum Breaker
1
1
2
In-wall Valve with
Integral Stop
2
2
3
Single
Wallmount
Valve
3
4
Double
Wallmount
Valve
4
Wallmounted
Vacuum Breaker
& Spout
3
4
5
5
Double-check
Vacuum Breaker
Spout
5
6
6
Pressure
Vacuum Breaker
and Spout
6
7
7
7
8
8
8
9
9
9
With
Self-close
Stop
✔
No. 6 Vacuum Breaker recommended for High Hazard Cross Connections and Continuous Pressure.
Check with Local Code Authorities for proper cross flow protection requirements.
Refer to www.specselectonline.com for individual models.
Note: Use this page front and back as a product submittal sheet.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselectonline.com for finish options and product availability.
Page 8.C.2
Single and Mixing
Bedpan Cleansers
Approvals:
NO. 1 CONTROL
• CSA certified
• Complies to ASME A112.18.1
NO. 2 CONTROL
44-66mm
(1.75-2.5”)
159mm
(6.25”)
• ADA Compliant and meets
Handicapped Accessibility
Standard ASME A117.1 of less than
5 lbs. operating force.
3/8” NPT
Vacuum Breakers/Spouts:
*1067mm
(42.0”)
• Spout No. 3 VB certified under ASSE
1001 and CSA Standard B64.1.1
48mm
(1.88”)
(NOT
SUPPLIED)
70mm
(2.75”)
29mm DIA.
(1.13”)
Hole
1/2” F.I.P.
• Spout No. 5 VB certified under ASSE
1035 and CSA Standard B64.8
NO. 3 and NO. 4 CONTROLS
• Spout No. 6 VB certified under ASSE
1020 and CSA Standard B64.1.2
• IAPMO listed
35mm DIA.
(1.38”)
Hole
1/2” F.I.P.
62mm
(2.44”)
51mm
(2") DIA.
71mm
(2.80”)
1/2”
NPT
(Contact Delta Representative for State and/or
Local Approvals.)
54mm
(2.13”)
MIN
FLOW
(USGPM)
4.5
17
16
114mm
(4.50”)
70mm
(2.75")
368mm to 391mm
(14.50" to 15.38")
4
15
154mm
(6.06”)
154mm
(6.06”) 92mm
(3.63”)
95mm
(3.75”)
222mm
(8.75”)
FLOWRATE vs PRESSURE
FLOW
(l/min.)
502mm
(19.75”)
NO. 5 SPOUT
14
3.5
13
12
38mm
(1.5”)
3
3/8” NPT
11
10
2.5
9
8
2
(NOT SUPPLIED)
7
6
1.5
80mm
(3.13”)
5
4
3
1
2
.5
1
0
0
0
10
20
30
40
50
60
70
NO. 3 and NO. 6 SPOUTS
44mm-76mm
1/2”
(1.75"-3.0")
FNPT/COPPER
51mm
(2.0")
(NOT
SUPPLIED)
1/2” NPT
80
Line Pressure (psig)
Bedpan Washer Outlet
64mm±10mm
(2.5"±.385")
*2210mm
(87.0")
89mm
(3.5")
45-74mm
(1.75"-2.9")
137mm
(5.4")
Note: For Control Option No. 3 & 4 it is
strongly recommended that each supply
line be equipped with a hammer
arrestor installed per manufacturer’s
instructions.
❏ 060327A
1/2" NPT Water Hammer Arrestor
Note: Measurements may vary ± 6mm (0.25'')
Refer to www.specselectonline.com for individual models.
51mm
(2.0”)
(NOT
SUPPLIED)
With Stop
DSP–54T1
133mm
(5.25”)
❏ ADD Suffix “QD” to Product Number
64mm
(2.5")
102mm
(4.0")
57mm
(2.25")
060252A
Quick Disconnect
Hose Connectors
*Suggested - Check local building code requirements on backflow protection and all installation heights.
Note: Use this page front and back as a product submittal sheet.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselectonline.com for finish options and product availability.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising