Supply Valves

Supply Valves
A
ngle or Straight
If your water source is coming from the wall,
choose angle.
If your water source is coming from the floor,
choose straight.
You must next determine the type of pipe you
will be connecting the valve to.
B
Supply Valves
FINISHES
JACLO finishes chart shown for reference only.
Finish samples available upon request.
IT CAN BE AS SIMPLE AS THE
ABC’S
Chrome
Polished Chrome
PCH
Price Group A
Oil-Rubbed Bronze
ORB
Polished Nickel
PN
Satin Chrome
SC
Satin Nickel
SN
rass Pipe or Copper
If your pipe is threaded choose brass.
Price Group B
If your pipe is not threaded choose copper.
Next, you will determine the configuration.
Antique Brass
AB
Black Nickel
BKN
Bronze Umber
BU
Matte Black
MBK
Polished Brass
PB
Satin Brass
SB
Sedona Beige
SDB
Vintage Bronze
VB
New
C
ompression, IPS or Sweat
White
WH
If your pipe is copper you have a choice between
compression or sweat.
Price Group C
Compression: A valve that uses a nut & sleeve
to tighten onto an existing pipe.
Sweat: A valve that has to be soldered to a pipe.
If your pipe is threaded, choose IPS and
determine size.
S
ize
New
Antique Copper
ACU
Europa Bronze
EB
Polished Copper
PCU
Polished Gold
PG
Satin Gold
SG
Tristan Brass
TB
Pewter
PEW
New
Unlacquered Brass
ULB
*Compression Valves not available in:
BKN, BU, MBK, SB, SDB, VB, WH, ACU, EB,
PCU, PEW, PG, SG, TB, ULB
1/2" IPS or Copper (Sweat)
PROUD TO BE AN AMERICAN COMPANY
3/8" IPS
5/8" O.D. Compression (Fits 1/2" Copper)
Confidence from start to finish.™
129 Dermody Street, Cranford, NJ 07016
T 800.852.3906 F 800.852.4133
E info@jaclo.com W jaclo.com
ABC-8.12
$2.00
Confidence from start to finish.®
800.852.3906 • orders@jaclo.com
VALVE TERMS AND COMPONENTS
SHUTOFF VALVE: Allows water supply to be turned on
or off to one fixture without affecting water supply to
other fixture. Most commonly used to supply faucets and
toilets. Available in both angle and straight pattern.
HANDLE OPTIONS
JACLO PIPE SIZING “CHEAT SHEET”
Quarter-Turn Ball Valves
Quarter-Turn Ball Valves:
3/8 IPS:
Wall/Angle:
615 - 3/8" IPS x 3/8" O.D. Compression
Floor/Straight: 618 - 3/8" IPS x 3/8" O.D. Compression
QUARTER TURN BALL VALVE: Valve that operates using
a pivoting ball (usually stainless steel) to turn water on
and off.
1/2 IPS:
Wall/Angle:
*COMPRESSION VALVE: Valve that operates using a
rubber washer on a rising stem that compresses against a
seat to turn water on and off. Usually requires more than
one turn to open or close.
SWEAT FITTING: Term used for fittings that require the
use of heat and solder to make the connection.
STANDARD CROSS
CONTEMPO LEVER
-2
CONTEMPO CROSS
-4
SQUARE
-7
OVAL
-8
Floor/Straight: 619 - 1/2" IPS x 3/8" O.D. Compression
620 - 1/2" IPS x 1/2" O.D. Compression
1/2 COPPER - SWEAT:
Wall/Angle:
COMPRESSION FITTING: This type of fitting uses a
compression sleeve and nut. Compression sleeve is
squeezed onto the pipe when nut is tightened, to make a
water tight connection.
616 - 1/2" IPS x 3/8" O.D. Compression
626 - 1/2" IPS x 1/2" O.D. Compression
629 - 1/2" Nom. Copper x 3/8" O.D. Comp.
630 - 1/2" Nom. Copper x 1/2" O.D. Comp.
SQUARE LEVER
-6
Floor/Straight: 631 - 1/2" Nom. Copper x 3/8" O.D. Comp.
635 - 1/2" Nom. Copper x 1/2" O.D. Comp.
1/2 COPPER - COMP.:
Wall/Angle:
Compression Valves:
621 - 5/8" O.D. Comp. x 3/8" O.D. Comp.
633 - 5/8" O.D. Comp. x 1/2" O.D. Comp.
Floor/Straight: 622 - 5/8" O.D. Comp. x 3/8" O.D. Comp.
623 - 5/8" O.D. Comp. x 1/2" O.D. Comp.
IPS FITTING: Term used when fittings and pipe are
threaded and requires screwing fitting and pipe together
to make connection.
*Compression Valves
CROSS
(Angle)
OVAL
(Straight)
3/8 IPS:
Wall/Angle:
585 - 3/8" IPS x 3/8" O.D. Compression
Floor/Straight: 590 - 3/8" IPS x 3/8" O.D. Compression
1/2 IPS:
COMMON PIPE SIZING TERMS
I.P.S. : Iron Pipe Size (Threaded)
O.D. : Outside diameter
Wall/Angle:
586 - 1/2" IPS x 3/8" O.D. Compression
5873 - 1/2" IPS x 1/2" O.D. Compression
Floor/Straight: 591 - 1/2" IPS x 3/8" O.D. Compression
Please see pages F22-F37 in Decorative Specialties
2011 Catalog for more details.
1/2 COPPER - SWEAT:
Wall/Angle:
582 - 1/2" Nom. Copper x 3/8" O.D. Comp.
I.D. : Inside diameter
Floor/Straight: 5826 - 3/8" IPS x 3/"8 O.D. Compression
NOM. : Nominal. Most commonly used for measurement
of inside of copper tubing.
1/2 COPPER - COMP.:
N.P.T. : National pipe thread. U.S. standard for tapered
threads on I.P.S. pipe.
Faucet & Toilet Supply Kits Available.
Wall/Angle:
5812 - 5/8" O.D. Comp. x 3/8" O.D. Comp.
Floor/Straight: 581 - 5/8" O.D. Comp. x 3/8" O.D. Comp.
TOILET SUPPLY KIT
FAUCET SUPPLY KIT
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising