DexCrimp 8A/1. Wire Insulated Connector with test facility

DexCrimp 8A/1. Wire Insulated Connector with test facility
DexCrimp 8A/1.
Wire Insulated Connector with test facility
Description.
DexGreen’s DexCrimp Connector Wire Insulated
8A/1is capable of jointing any two wires shown
in the information detailed below.
DexCrimp provides reliable means of connecting
copper or aluminium telephone conductors PE
or PVC insulated with no requirement to strip
the insulation.
The new DexCrimp 8A/1 connector is
constructed so that when the idc is used there
is a minimum of 4mm clear wire travel past the
last idc blade.
DexCrimp 8A/1.
Wire Insulated Connector with test facility
Benefits and Features DexGreen DexCrimp 8A/1
• Full compliance to the BTLN 363C specification to be undertaken and verified by BT openreach.
• The cable entry ports are designed to accommodate and retain a customised test probe. This test probe can be
inserted in every box 500 issued to the field.
• Specially designed cable entry ports enables a 0.9mm poorly cut wire with flattened insulation to be inserted
easily into the connector.
• Adopting and establishing a working practise to use and encourage the use of test probes rather than using
crocodile clips or nicking the cable insulation to test will significantly reduce Shiners.
• Long term the reduction in Shiners will improve Network Reliability and significantly reduce Truck Rolls.
• The Polypropylene material for the base and cover has excellent properties, high tensile strength, good chemical
resistance and resistance to cracking in low working temperatures, good impact resistance and finally high
clarity for visual inspection of the crimped splice.
• The maximum diameter measured over the insulation is 2.06mm and the conductor range for the connector is
0.4 to 0.9mm or 26 to 19AWG.
• The connectors are filled with a high quality sealant that ensures excellent insulation resistance and electrical
performance in the most stringent environmental conditions.
• Full manufacturing tractability on packaging and the component..
• Conductor type solid copper or aluminium alloy
• Capable of being used with paper, solid polyethylene, or cellular polyethylene insulation.
Test reports available on request.
Dimensional information
Dimensions
Ordering information
Part No.
Description
DexCrimp 8A/1
2 wire insulated connector. Standard
box quantity 500.
Length (max)
15.5mm
Height open (max)
9.5mm
Height closed (max)
6.3mm
DexCrimp Pliers
Crimping pliers with wire cutter.
Height closed (min)
5.6mm
DexCrimp Test Probe
Stainless steel test probe.
Width (max)
10mm
Packaging information
Testing information
Test probe
Test Probe inserted into the
port to make contact with the
element.
DexCrimp 8A/1.
Packaging specification
Pallet weight – 375 kg
Carton box weight – 14 Kg
Plastic box weight – 420 grams
DexCrimp 8A/1.
Connector Wire Insulated 8a with test facility
Item code 00462
The cable entry ports are designed to accommodate and retain a customised test probe. The test probe is inserted in
every box of 500 connectors.
Adopting and establishing a working practise to use and encourage the use of the test probe rather than using
crocodile clips piercing or nicking the insulation to test will significantly reduce shiners. Long term reduction in Shiners
will improve network reliability and significantly reduce truck rolls.
Test probe
Using single proba as in test for earths
Test probe
DexGreen Limited, Unit 2, Pinnacle Business Park, Ballytrasna, Little Island, Co Cork, Ireland
Tel: 00353 21 4317955 Email: dexgreen@eircom.net Data Sheet 43 issue 1.3
Fax: 00353 21 4316269 Internet: www.dexgreen.com
Certification number: 21216
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising