ES Detect – TM, TME, TD, O, OTblue, O2T

ES Detect – TM, TME, TD, O, OTblue, O2T
ES Detect – TM, TME, TD, O, OTblue, O2T
P Intelligent non addressable detector for conventional area
P Wide range of different detector types, including multisensor
P Indicates detector contamination and implements quiescent
value tracing in accordance with the current standards and
directives
P Complete self-monitoring
P Optimum adjustment to ambient conditions through configurable parameters
P Perfect suitable to the ES Line system
P Up to 30 detectors per detection group
P Integrated fault, alarm and operating hours counter
P Easy maintenance, reduced storage costs
Innovative fire detection
The ES Detect automatic detector is an intelligent nonaddressable detector specifically designed for operation
on conventional detector groups e.g., the fire alarm control
panel ES line.
ES Detect sets new standards in conventional technology
through high quality sensors with advanced detection technology. These include not only the intelligent algorithms for
fire detection but also the wide range of different types of
detectors, including multisensor detectors OTblue and O²T.
ES Detect also helps to save costs, because with the implemented drift compensation, ES Detect can be oper-ated
a full eight years, instead of five years for ordinary detectors, according to DIN 14675.
Numerous accessories are available from the program of
the IQ8Quad detector series. The ES Detect is equipped
with a logo for optical differentiation.
The convenient maintenance with the tools 8000 programming software (in preparation) completes the full spectrum
of ES Detect, from which the operating data of the detector,
for example, the measured values, contamination, alarm
counters, operating hours counter ..., can be read and
stored. The detectors remain where they were installed,
because the complete detector group can be connected
to a PC and serviced via the field bus and control panel
interface (Part No. 789862.10).
Wide range of detector types:
Fixed heat detector:
Automatic heat detector with fast semiconductor sensor
to guarantee reliable detection of fires with strong heat
generation.
Fixed heat detector class B:
For increased operating temperature according to EN 54-5
class B.
Rate-of-rise heat detector:
Automatic heat detector with fast semiconductor sensor to
guarantee reliable detection of fires with rapidly rising temperatures and integrated fixed temperature function for the
detection of fires with slowly rising temperatures.
Optical smoke detector:
Optical smoke detector to guarantee safe and early detection of fire.
OTblue multisensor fire detector:
Multisensor fire detector with integrated optical detector
and heat detector. Enables earliest possible detection
of even the finest particles through optical measurement
using the “Blue Principle”. The first to replace the ionization
detector.
O2T multisensor fire detector:
Multisensor fire detector provided with two built-in optical
smoke sensors with different scattered light angles as well
as additional heat detector sensor evaluation to guarantee
the detection of different types of fire from smoldering fires
to open fires with constant sensitivity
DIN 14675
ES Line
Z1
117
Z2
Z3
Z4
62
FlexES Control
Z1
Z2
Fire detector with base
Z3
Z4
System overview
Measurements
TM
TME
TD
O
OTblue
O²T
Part number
800171
800177
800271
800371
800375
800374
Quiescent current
approx. 25 μA approx. 25 μA approx. 25 μA approx. 30 μA approx. 35 μA approx. 45 μA
Application temperature -20 °C ... 50 °C -20 °C ... 65 °C -20 °C ... 50 °C -20 °C ... 72 °C -20 °C ... 50 °C -20 °C ... 65 °C
VdS number
G 213068
G 213067
G 213069
G 213066
G 213065
Detector specification
EN 54-5 A1S
EN 54-5 BS
EN 54-5 A1R
EN 54-7
EN 54-7/-5 A2, EN 54-7/-5 B,
CEA 4021
CEA 4021
General specifications
Operating voltage
8 ... 42 V DC
Alarm current @ 9 V DC
typ. 9 mA
Air speed
0 ... 25.4 m/s
Storage temperature
-25 °C ... 75 °C
Air humidity
< 95 %
Type of protection
IP43 (with base + option)
Material
ABS
Color
white, similar to RAL 9010
Weight
ca. 110 g
Dimensions
Ø: 117 mm H: 49 mm (62 mm incl. base)
Order information
Part No.
Fixed heat detector ES Detect
800171
Fixed heat detector ES Detect, class B
800177
Rate-of-rise heat detector ES Detect
800271
Optical smoke detector ES Detect
800371
OTblue multisensor fire detector ES Detect
800375
O2T multisensor fire detector ES Detect
800374
Standard detector base for IQ8Quad, ES Detect
805590
Detector base with relay contact for IQ8Quad, ES Detect
805591
Novar GmbH a Honeywell Company
Honeywell Life Safety Austria GmbH
Dieselstraße 2,
Phone: +49 2131 40615-600
41469 Neuss, Germany
Fax: +49 2131 40615-606
Lemböckgasse 49,
Phone: +43 1 600 6030
1230 Vienna, Austria
Fax: +43 1 600 6030-900
www.esser-systems.com
info@esser-systems.com
www.hls-austria.com
hls-austria@honeywell.com
G 213070
Part No. D800024.G0 • 03/2014 • Technical information is subject to change without notice!
Type
© 2014 Honeywell International Inc.
Specifications
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising