2stage vacuum laminator

2stage vacuum laminator
www.leetech-kr.com
2STAGE VACUUM LAMINATOR
Model No. : LT-062
SYSTEM DESCRIPTION
This device (LT-062) transports PCB and film(DF/DFSR) supplied by Temporary laminator using carrier film to chamber to make the inside of
camber vacuum, after conducting the perfect lamination by using silicone diaphragm and compressed air and adding heat and pressure,
realize the best flatness by using consistent heat and pressure in hot press.
FEATURES
- Adopting diaphragm+compressed air pressure adding system can secure the production of high quality products and high productivity.
- The optimized design can realize the easy maintenance and the best flatness
- Reasonable maintenance cost of supplies.
- All the control is available from touch panel, it provide user’s convenience UI.
SPECIFICATIONS
DIVISION
PCB SPEC.
DIVISION
CAPABILITY
UTILITY
FILM UN/REWINDER
VACUUM LAMINATION
HOT PRESS
IONIZER
WEIGHT
DIMENSIONS
MATERIAL SPECIFICATIONS
SPECIPICATIONS
SIZE : MAX. ~ 550 × 550mm (OPTION : 650mm × 650mm)
TOTAL : 0.1mm ~ 1.6mm
EQUIPMENT SPECIFICATIONS
SPECIPICATIONS
TACK TIME : OVERTHAN 50 SEC.( IF VACUUM 15SEC. & PRESS 15SEC.)
POWER : 220VAC 3PHASE 50/60HZ 35KW
FILM EXCHANGE : AIR CHUCK SYSTEM
MAX. OUT DIAMETER : 300mm
VACUUM METHOD : VACUUM PUMP (MAX. 5X10E-4 Torr)
UPPER SIDE PRESS METHOD : SILICONE DIAPHRAGM BY COMPRESSED AIR
LOWER SIDE PRESS METHOD : SILICONE
HEATING METHOD : SILICONE PLATE HEATER(MAX. TEMPERATURE : ~110℃)
PRESSURE : MAX. 47TON
HEATING TEMPERATURE : MAX. 150℃
FLATNESS : WITHIN. 20㎛
ION-GENERTION METHOD : CORONA DISCHAGE PULSE AC
ABOUT 7.0TON
ABOUT 3920mm(L) × 1900mm(W) × 1600mm(H)
LEETECH CO., LTD. 26-46, Juseok-ro 80beon-gil, Hwaseong-si, Gyeonggi-do, Korea(445-040) TEL : +82-31-429-9484 FAX : +82-31-429-9485 E-Mail : sales@leetech-kr.com
www.leetech-kr.com
AUTO CUT SHEET WET LAMINATOR
Model No. : LT-053
SYSTEM DESCRIPTION
The equipment (LT-053) automatically aligns sheet-type materials to pass through D.I Water.
The equipment then utilizes hot roller to perform wet lamination of dry films that have been cut to fit the pre-set margins of PCBs.
FEATURES
- Precise margin control through auto cutting method applying the Servo System.
- Excellent Lamination adherence by applying D.I Water Station.
- Convenient exchange of dry film and suppliers through Main Body In-out design.
- The equipment can be entirely controlled at the Touch Panel, and provides a highly convenient UI.
SPECIFICATIONS
DIVISION
WORK SPEC.
FILM SPEC.
DIVISION
CAPABILITY
UTILITY
FILM CUTTER
HOT ROLLER
D.I WATER STATION
IONIZER
CLEANER(OPTION)
AUTO LOADER & AUTO UN-LOADER
(OPTION)
WEIGHT
DIMENSIONS
MATERIAL SPECIFICATIONS
SPECIPICATIONS
SIZE : 250 × 250 ~ 500 × 500mm
TOTAL : 0.04mm ~ 1.0mm
MATERIAL : PE, PVC, ACRYL…
THICKNESS : 20 ~ 50㎛
OUT DIAMETER : MAX. 200mm
EQUIPMENT SPECIFICATIONS
SPECIPICATIONS
LAMINATION SPEED : 1.0 ~ 2.5M/min
LAMINATION MARGIN ACCURACY : ±1mm(LEFT & RIGHT, FRONT & REAR)
POWER : 220VAC 3PHASE 50/60HZ 11KW
AIR : 6kgf/㎠ 300L/min
CUTTER DIAMETER : 60mm(Blade)
CUTTING ACCURACY : ±1.0mm
SILICON COATING, DIAMETER : Ø80, TEMP. : 120℃±3℃(MAX.)
HARDNESS : 65°±3°
ROLLER PRESSURE : 2 ~ 5Kgf/㎠
WATER SUPPLY CAPACITY : 4.5㎥/h (75L/min)
ION-GENERTION METHOD : CORONA DISCHAGE PULSE AC
CLEAN ROLLER : ADHESIVE SILICONE COATING
PICK UP METHOD : VACUUM PAD
MOVING ACTUATOR : 1AXIS ROBOT
UP/DOWN METHOD : AC GEARED MOTOR
ABOUT 1.6TON
ABOUT 2050(L) × 1550(W) × 1700(H)
LEETECH CO., LTD. 26-46, Juseok-ro 80beon-gil, Hwaseong-si, Gyeonggi-do, Korea(445-040) TEL : +82-31-429-9484 FAX : +82-31-429-9485 E-Mail : sales@leetech-kr.com
www.leetech-kr.com
AUTO SHEET TO ROLL WET LAMINATOR
Model No. : LT-071
SYSTEM DESCRIPTION
The equipment (LT-071) inserts sheet type materials automatically at desired intervals and aligns them for cleaning prior to going through D.I
Water. Then the equipment uses the hot roller to perform wet lamination of PCB and dry films for re-winding as roll-type.
FEATURES
- Outstanding adherence upon lamination thanks to utilization of D.I. Water Station.
- Highly precise centering device, with Servo System applied.
- Dry Film Chuck System allowing position adjustment during lamination
- High productivity, low maintenance cost, and easy film setting/ exchange through optimized design.
- Excellent adherence with no bending of hot rollers through utilization of a backup roller system.
SPECIFICATIONS
DIVISION
WORK SPEC.
FILM SPEC.
DIVISION
CAPABILITY
UTILITY
HOT ROLLER
PANEL TO PANEL SPACE
D.I WATER STATION
IONIZER
WEIGHT
DIMENSIONS
CLEANER
MATERIAL SPECIFICATIONS
SPECIPICATIONS
SIZE : 250 × 250 ~ 500 × 500mm
TOTAL : 0.04mm ~ 0.1mm(Sheet to sheet : 0.04mm ~ 1.0mm)
THICKNESS : 20 ~ 50㎛
MAX. DIAMETER : 200mm
EQUIPMENT SPECIFICATIONS
SPECIPICATIONS
LAMINATION SPEED : ~ 2.0M/min
POWER : 220VAC 3PHASE 50/60HZ 11KW
AIR : 6kgf/㎠ 250L/min
SILICONE COATING, DIAMETER : Ø100, TEMP. : MAX. 120℃±3℃
HARDNESS : 65°±3°
ACCURACY : ±1.5mm
WATER SUPPLY CAPACITY : 4.5㎥/h (75L/min)
ION-GENERTION METHOD : CORONA DISCHAGE PULSE AC
ABOUT 1.8TON
ABOUT 2780mm(L) × 1200mm(W) × 1800mm(H)
ADHESIVE ROLLER 2(UPPER&LOWER) × 4SET, TAPE ROLLER 2 × 2SET(UPPER & LOWER)
LEETECH CO., LTD. 26-46, Juseok-ro 80beon-gil, Hwaseong-si, Gyeonggi-do, Korea(445-040) TEL : +82-31-429-9484 FAX : +82-31-429-9485 E-Mail : sales@leetech-kr.com
www.leetech-kr.com
AUTO TEMPORARY LAMINATOR
Model No. : LT-046
SYSTEM DESCRIPTION
The equipment (LT-046) aligns sheet-type (PCB) products for dry film cutting. After the dry film cutting, the equipment joins the top/
bottom sheets for loading applying the vacuum laminator.
FEATURES
- As the task is performed between PCB and Dry Film without heat adherence, wrinkles.
And air bubble defects can be prevented to result in production of optimal products.
- As the clean machine is attached, additional contamination during transportation is prevented.
- A high level of margin precision through application of Servo Motor System.
- Film length and un-loading location can be automatically adjusted just by entering the product size.
- Space is saved through integration of the loading part and the cleaner part.
- The equipment can be entirely controlled at the Touch Panel, and provides a highly convenient UI.
SPECIFICATIONS
DIVISION
PCB SPEC.
FILM SPEC.
DIVISION
CAPABILITY
UTILITY
CLEAN MACHINE
IONIZER
WEIGHT
DIMENSIONS
MATERIAL SPECIFICATIONS
SPECIPICATIONS
SIZE : 250 × 250 ~ 500 × 500mm (CAN BE CHANGE BEFORE P.O)
TOTAL : 0.07mm ~ 1.0mm
THICKNESS : 20 ~ 50㎛
MAX. DIAMETER : 200mm
FILM WIDTH : 250 OR 500mm (CAN BE CHANGE BEFORE P.O)
EQUIPMENT SPECIFICATIONS
SPECIPICATIONS
TACK TIME : LESSTHAN 30 SEC.(DOUBLE SIDE)
LAMINATION MARGIN ACCURACY : ±1.0mm
(LEFE & RIGHT, FRONT & REAR)
POWER : 220VAC 3PHASE 50/60HZ 13KW
AIR : 6kgf/㎠ 300L/min
CLEAN ROLLER : ADHESIVE SILICONE COATING
TAPE ROLLER
ION-GENERTION METHOD : CORONA DISCHAGE PULSE AC
ABOUT 2.3TON
ABOUT 3600mm(L) × 1600mm(W) × 2350mm(H)
LEETECH CO., LTD. 26-46, Juseok-ro 80beon-gil, Hwaseong-si, Gyeonggi-do, Korea(445-040) TEL : +82-31-429-9484 FAX : +82-31-429-9485 E-Mail : sales@leetech-kr.com
www.leetech-kr.com
AUTO VACUUM LAMINATOR
Model No. : LT-050
SYSTEM DESCRIPTION
The equipment (LT-050) uses PCB and Dry film supplied from Temporary Laminator to the chamber using the Carrier film. The equipment
then turns the inside of the chamber into vacuum and uses the silicone diaphragm and compressed air to apply heat and pressure for
thorough lamination.
FEATURES
- By applying the system involving diaphragm + compressed air, production of high productivity and high quality is enabled.
- Reasonable maintenance and supplies costs.
- Convenient maintenance and repair through optimized design.
- The equipment can be entirely controlled at the Touch Panel, and provides a highly convenient UI.
SPECIFICATIONS
DIVISION
PCB SPEC.
DIVISION
CAPABILITY
UTILITY
FILM CARRIER
FILM UN/REWINDER
VACUUM
PRESS
IONIZER
WEIGHT
DIMENSIONS
MATERIAL SPECIFICATIONS
SPECIPICATIONS
SIZE : MAX. ~ 550 × 550mm (OPTION : 650mm × 650mm)
TOTAL : 0.1mm ~ 1.6mm
EQUIPMENT SPECIFICATIONS
SPECIPICATIONS
TACK TIME : OVERTHAN 50 SEC.(IF VACUUM 15SEC. & PRESS 15SEC.)
POWER : 220VAC 3PHASE 50/60HZ 14KW
AIR : 6kgf/㎠ 300L/min
CARRIER METHOD : GRRIPER WITH 1 AXIS ROBOT
FILM EXCHANGE : AIR CHUCK SYSTEM
MAX. OUT DIAMETER : 300mm
VACUUM METHOD : VACUUM PUMP (MAX. 5X10E-4 Torr)
UPPER SIDE PRESS METHOD : SILICONE DIAPHRAGM BY COMPRESSED AIR
LOWER SIDE PRESS METHOD : SILICONE PLATE
HEATING METHOD : SILICONE PLATE HEATER(MAX. TEMPERATURE : ~110℃)
ION-GENERTION METHOD : CORONA DISCHAGE PULSE AC
ABOUT 3.4TON
ABOUT 2585mm(L) × 1720mm(W) × 1550mm(H)
LEETECH CO., LTD. 26-46, Juseok-ro 80beon-gil, Hwaseong-si, Gyeonggi-do, Korea(445-040) TEL : +82-31-429-9484 FAX : +82-31-429-9485 E-Mail : sales@leetech-kr.com
www.leetech-kr.com
ROLL TO ROLL WET LAMINATOR
Model No. : LT-056A
SYSTEM DESCRIPTION
The equipment (LT-056A) passes through D.I. Water onto roll-type materials, and utilizes hot roller to perform wet lamination of dry films.
FEATURES
- Outstanding adherence upon lamination thanks to utilization of D.I. Water Station.
- High quality un-winding and re-winding through application of the Tension Controller and EPC System.
- High productivity, low maintenance cost, and easy film setting/ exchange through optimized design.
- Excellent adherence with no bending of hot rollers through utilization of a backup roller system.
SPECIFICATIONS
DIVISION
FPCB SPEC.
FILM SPEC.
DIVISION
CAPABILITY
UTILITY
HOT ROLLER
D.I WATER STATION
CLEAN MACHINE
IONIZER
EPC SYSTEM
WEIGHT
DIMENSIONS
MATERIAL SPECIFICATIONS
SPECIPICATIONS
WIDTH : MAX. 550mm
TOYAL : ~ 0.1mm
THICKNESS : 20 ~ 50㎛
MAX. DIAMETER : 200mm
EQUIPMENT SPECIFICATIONS
SPECIPICATIONS
LAMINATION SPEED : MAX. 4.5M/Min
POWER : 220VAC 3PHASE 50/60HZ 11KW
AIR : 6kgf/㎠ 250L/min
SILICONE COATING, DIAMETER : Ø80, TEMP. : 120℃±3℃(MAX.)
HARDNESS : 65°±3°
WATER SUPPLY CAPACITY : 4.5㎥/h (75L/min)
CLEAN ROLLER : ADHESIVE SILICONE COATING
TAPE ROLLER
ION-GENERTION METHOD : CORONA DISCHAGE PULSE AC
E.P.C CONTROLLER, ACCURACY ±0.2mm
ABOUT 1.2TON
ABOUT 2200mm(L) × 1375mm(W) × 1875mm(H)
LEETECH CO., LTD. 26-46, Juseok-ro 80beon-gil, Hwaseong-si, Gyeonggi-do, Korea(445-040) TEL : +82-31-429-9484 FAX : +82-31-429-9485 E-Mail : sales@leetech-kr.com
www.leetech-kr.com
SEMI-AUTO WET LAMINATOR
Model No. : LT-051A
SYSTEM DESCRIPTION
The equipment (LT-051A) inserts sheet type materials automatically at desired intervals and aligns them to pass through D.I. Water.
Then the equipment uses the hot roller to perform wet lamination of PCB and dry films.
FEATURES
- Outstanding adherence upon lamination thanks to utilization of D.I. Water Station.
- Highly precise centering device, with Servo System applied.
- Dry Film Chuck System allowing position adjustment during lamination.
- High productivity, low maintenance cost, and easy film setting/ exchange through optimized design.
- Excellent adherence with no bending of hot rollers through utilization of a backup roller system.
SPECIFICATIONS
DIVISION
WORK SPEC.
FILM SPEC.
DIVISION
CAPABILITY
UTILITY
HOT ROLLER
D.I WATER STATION
IONIZER
WEIGHT
DIMENSIONS
CLEANER
MATERIAL SPECIFICATIONS
SPECIPICATIONS
SIZE : 250 × 250 ~ 510 × 510mm
TOTAL : 0.04mm ~ 1.0mm
THICKNESS : 20 ~ 50㎛
MAX. DIAMETER : 200mm
EQUIPMENT SPECIFICATIONS
SPECIPICATIONS
LAMINATION SPEED : ~ 3.0M/min
POWER : 220VAC 3PHASE 50/60HZ 7KW
AIR : 6kgf/㎠ 100L/min
SILICONE COATING, DIAMETER : Ø80, TEMP. : MAX. 120℃±3℃
HARDNESS : 65°±3°
WATER SUPPLY CAPACITY : 4.5㎥/h (75L/min)
ION-GENERTION METHOD : CORONA DISCHAGE PULSE AC
ABOUT 1.6TON
ABOUT 2375mm(L) × 1360mm(W) × 1820mm(H)
ADHESIVE ROLLER 2(UPPER & LOWER) × 4SET, TAPE ROLLER 2 × 2SET(UPPER & LOWER)
LEETECH CO., LTD. 26-46, Juseok-ro 80beon-gil, Hwaseong-si, Gyeonggi-do, Korea(445-040) TEL : +82-31-429-9484 FAX : +82-31-429-9485 E-Mail : sales@leetech-kr.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising