高清车载摄像机
JINWEI Full HD HDR GPS Car Camcorder
Instruction Manual
Welcome to choose our Car Camcoder
This Instruction Manual is to explain how to use our car DVR properly, and offer you detail about operation, installation, cautions
and technical specification. Please read the manual carefully before operation, and keep it properly for future reference.
Product Overview
This unit is one mini size and HD camcorder with advanced HD technology, shooting; USB transfer and battery recharge function.
Feature:
Compacted unit size, 145 degree wide viewing angle and high resolution lens, rotatable panel, good for video recording, shooting in
high resolution at various spots.
 2.0 inch TFT LCD display.
 6 layers All Glass lens, focusing range: 60CM to Infinity
 Built in Micro phone/Speakers
 Compatible with TF(SDHC) memory card up to 32GB
 HD out socket for HD display
 Loop recording/Motion Detection/Seamless recording
 Auto screen saver (wake up screen by any button on panel)
 Warning Voltage: Auto power off and save videos under 3.65V, recharge reminder, Working Voltage: 3.7V
 Auto power on and record while auto engine started.
 Time-lapse powering off after disconnected with car power.
 Instant Mute function.
 Video restore function if damaged.
 G-sensor
 Parking Monitor: Collision or shaking will trigger to start recording.
 Automatic time setting via GPS
I.Panel Illustration
1.
Menu/Return
7.
HD Out
2.
Playback/UP/Mute
8.
Reset button
3.
Snap/Down/Lock button
9.
Power on/off button
4.
Recording/OK
10. Micro SD slot
5.
Mount socket
11. Lens
6.
Micro USB
II. Button Illustration
1.
Power Switch:Press to power the unit on, hold it for 3 seconds to power off
2.
Recording/OK: Press to start/stop recording. In Setting Menu, press to confirm settings
When video preview, press to confirm playing selected video/images
When video playback, press to stop playback.
3.
SOS / DOWN: When recording, press to lock down the video in recording.
Press to select next menu/video/image
In video preview, press to take a shooting.
4.
MIC Switch/ UP: When recording, press to open/shut down MIC (Open is defaulted)
Press to select next menu/video/image
5.
MENU/Return: When recording, press to to enter settings
When video preview, press to enter/exit settings
When video playback, press to return to preview interface.
Reset: When unit is down to work, press Reset button to get it work.
6.
III. Host on panel
1
Micro SD slot:Load TF card in properly direction according to sign on panel before recording or shooting. Please choose
high speed TF card complying with SDHC specification. High speed TF card will be marked C6/C10. Class 6 or above is
suggested. If memory card is not compatible with our device, unit may not read the card. Please load the card, and format it.
2
HD Out: Connect HD cable with TV set to play videos. Please refer to indication on TV for further operation.
3
USB:Micro usb Connect with DC wire to recharge the unit. When low battery, unit can work while recharged.
Micro usb Connect with PC to view or select files in the memory card.
△ Keep unit OFF before connected with PC to keep away from damage by high circuit.
Note:
1
△ Micro usb can not be connected with DC or USB wire to keep away from damaging the unit.
2
IV. LED light illustration
① Recharging LED: The LED will light up when recharging. When recharge finished, the LED light will turn off.
② Recording LED: Blue LED will flash while recording. When stop recording, blue LED will stop flashing to lighting up.
V. Battery recharge
1.
Connect unit with the car cigarette. Unit can be recharged when working or power-off.
2.
Connect unit with PC through the USB wire. Unit can be recharged when working or power-off
3.
Connect unit with USB power adapter. Unit can be recharged when working or power-off
Warning: Turn unit off when connecting with PC to keep away from damaged by high circuit.
Connect with 12V/24V car power
Unit can be recharged by connected with PC or DC power adapter
① Before recording, please enable the “Loop recording” function in the Menu list and keep the unit connected with car power.
When car engine is started, unit will automatically turn on. When car engine is stopped, unit will keep on recording for 15
seconds, and automatically power off after saving recordings.
② Please only use 5V output car power adapter for the unit, otherwise, it may damage the unit or cause malfunction.
Power ON/OFF and Auto Power Off
1.Press Power switch to power on the unit, and hold the switch for three seconds to turn it off.
2.To save battery power, the Auto Power Off time can be set. Unit will automatically power off if no operation within the time.
VI. Setting Menu
In preview mode, press Menu button to enter top Menu:
1.
Video Resolution:1920×1080 /30p 16:9,HDR 1920×1080 /30p 16:9,1280×720 /60p 16:9,1280×720 /30fps 16:9
Choose the video resolution, the higher it is, more clear the videos will be.
2.
Loop recording: Off、1 Minute、3 Minutes、5Minutes
Set the time length of each video section for loop recording. If Loop Recording is disabled, recording will be stopped while
memory space runs out.
3.
Motion Detection:Off、On
If any movement is detected by the lens, unit will automatically start recording, and will stop when no movement.
4.
Parking Monitor---On/Off
Parking monitor function is triggered by the G sensor in the unit. When parking monitor is OFF, the G sensor and CPU will not
work. When it is On, unit will be switched to Parking Monitor Mode after shutting off.
5.
Image Quality:S Fine、Fine、Normal
Set the video definition, the higher it is, the more clear videos will be
6.
Mic:Off、On
7.
Stamp:Date、Time、Driver ID
Date, time, Driver ID will be stamped at the right bottom corner of videos if it is enabled.
8.
G-Sensor:Off、High、Medium、Low
If any shaking or collision occurs while recording, unit will automatically lock down the video in recording. A Lock sign will
appear on the right top corner of the screen. After recording, the locked videos will be protected, it will not be covered by loop
recording.
Note: The sensitivity of G sensor can be set, Medium is defaulted.
9.
White Balance:Auto、Incandescent、Sunny、Cloudy、Fluorescent
As the color of objective is subject to color of light source, videos recorded may own different color temperature. Please set
the white balance properly.
10. Ev: -2.0/-1.7/-1.3/-1.0/-0.7/-0.3/0/0.3/0.7/1.0/1.3/1.7/2.0/
Fill light according to different light source intensity in different environment.
12.
Languages:English/Chinese S./Chinese T./Russia
13.
Date/Time:
Set the date and time. Press UP/Down button to set properly, press OK to save your setting and exit.
14.
Beep:On、Off
Turn On/Off Beep sound
15.
Auto Power Off: Off、1 Minute、3 Minutes、5 Minutes
When no operation on the unit within the time, unit will automatically power off.
16.
Backlight Off:On, Off
When no operation on unit, display will go off. Press any key to wake the unit up.
17.
Card Volume:Total Volume、Used、Remaining
Show the memory card remaining capacity
18.
Driver ID
Stamp the car plate number into the videos
19.
Format: OK、Cancel
Format the memory card
20.
Default Setting: OK、Cancel
Reset the unit to default settings
21. Driving time warning: off、1Hour、2Hours、3Hours、Hours
Setting the time to remind drivers, if driving to reach the set time, the device will broadcast prompt “long driving dangerous, it is
recommended to enter the service area to rest”.21.
22.
Version Info:Unit firmware version information
Delete:Event、Normal
Enter Menu list and select Delete. Unit will go to video preview pages. Select file folders (Event Videos, Normal Videos). Press
OK button to choose videos you want to delete or delete all.
VII. Other function
Instant Mute
When recording, press
button to mute MIC. Press again to resume.
SOS
While recording, press button
to lock down the video in recording. The locked video will not be deleted by loop recording.
Video restore
When unit is in low power or down to work, it may damage the video files. When started next time, unit will automatically restore
damaged videos.
Videos Backup
1.Connect unit with PC through USD wire, unit will be in Mass Storage mode. All videos are stored in Even and Normal folders of
memory card. All locked videos are stored in Event folder, and others are stored in Normal folder
2.PC Operation System:Windows XP2/Vista/Windows 7/Windows 8
GPS Tracking
Install the bracket properly, and connect with DC power through Micro usb port. There is a GPS mark on the top left corner of the
screen. If showing
icon, unit is still searching GPS satellites. If
icon on screen, the unit has been positioning properly.
Play the videos by our GPS player, car location and running route etc will be display on Google Maps .
GPS Player instruction
1. Suggested system: windows XP or above
2. Interface instruction:
1) Video play area
2) Operation buttons
3) Play list
4) GPS Map area:If there is no GPS information, this area will not show map.
5) GPS coordinate、Speed、G-sensor area
4. Operation buttons instruction:
Snap pic. in video
Choose the folder to play
Choose the files in the play list
Play control button:previous/stop/next
Delete video from play list
Video information: time, volume, file size
Exchange between 2G map and Google map
5.

Menu setting
speed limit alerts:10~160 KM/H
Press
button to set the driving speed reminds value , press OK to switch to the next setting .
When the vehicle speed exceeds a set value will remind speeding .

time zone:12~0~-12
Press
button to set the time zone , press OK to switch to the next setting .
When the GPS positioning is successful, according to the time zone set to automatically calibrate the system time.

self coordinates:Driving on the way to the emergence of undocumented gun point , any press
or
automatically
create and record the coordinates of the point of the current position , it will automatically alert the next time through .

voice broadcast mode:Complete broadcast、 Simple broadcast
Complete broadcast:All such : gun point , traffic lights , gas stations, etc. integrity broadcast。
Simple broadcast:Important information broadcast only a few ( such as gun point , traffic lights , etc. )。
According to personal use needs , broadcast mode button
or
to select .
Play on TV
1)HD OUT
Power the unit on, and set to video playback mode. Connect unit with TV through HDMI wire, switch TV to HDMI model and press
Play button to get videos played on TV.
Tips:
If unit is down to work by wrong operation, please press RESET button and restart the unit.
Technical Datasheet
Display
2.0 inch TFT LCD monitor
Lens
145 degree wide viewing angle and 6 layer all glass lens. TTL:21~22mm
Languages
English/Chinese S./Chinese T./Russia
Video Format
MOV
1920×1080 /30p 16:9,HDR 1920×1080 /30p 16:9,1280×720 /60p
Video Resolution
16:9,1280×720 /30fps 16:9
Motion Detection
ON/OFF
Audio Recording
ON/OFF
Image Resolution
4M Pixels
Image Format
JPEG
Memory Card
Micro SD card up to 32GB
MIC/Speaker
Built In
Backlight Off
ON/OFF
Auto Power Off
OFF/1 Minute/3 Minutes/5 Minutes
USB Port
USB2.0
Battery Capacity
200MAH 3C
PC Operation System
Windows XP2/Vista/Windows 7/Windows 8
Note: No changes for the above datasheet without notice
Jinwei Electronic Co.,Ltd. provides the best surveillance systems and good service for global market.
Address: Rm. 51, 4F., No.8, Sec. 3, Civic Blvd., Da’an Dist., Taipei City 106, Taiwan (R.O.C.)
Tel: +886-2-23962950
Fax: +886-2-23962870
Email: awjin.wei@msa.hinet.net
Web: www.jinwei.tw
FB: https://www.facebook.com/Jinwei.Electronic
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising