Ferro / SCR Retrofit Power Solution

Ferro / SCR Retrofit Power Solution
PRODUCT OVERVIEW
Ferro / SCR Retrofit Power Solution
Cost Effective Energy Efficiency Upgrade
• Preserves distribution and cabling investments
Benefits
• Retrofits legacy ferro or SCR rectifiers
Reliability
• Modern Galaxy SC and Millennium II controllers
– Delivers decades of service
– Adaptive Rectifier Management (efficiency
management)
– Thermal compensation and battery
management features
• Efficiency approaching 97%
• Integrated 10/100Base-T Ethernet as well as serial
port for local or modem connectivity
– Proven field performance
– Controller continuity
Intelligence
– Industry leading controller features
– Ethernet interface for remote access
– Centralized network management
Investment Protection
– Energy efficiency improvement
– Seamless integration with ferro plants
– Re-certify and re-warranty whole plant
The DC Power industry offered stand-alone
200, 400 and 800 ampere ferro-resonant
rectifiers throughout the 1980s and 1990s.
These legacy ferro-resonant rectifiers
have since been discontinued by most
manufacturers. The Ferro / SCR Retrofit
Power Solution allows GE and third party
legacy ferro-resonant or SCR rectifiers to
be upgraded to modern energy-efficient
switched mode rectifiers and controller
technology while preserving existing cabling
and distribution investments. Bolting patterns
remain the same as well.
The RPS cabinet is designed to accommodate
multiples of 220A 595LT rectifier utilizing the
same floorspace of the existing ferro-based
product. The top section of each RPS cabinet
is carefully designed to offer the AC and
DC connection points at the same physical
location as the ferro being replaced, enabling
the existing AC and DC cabling infrastructure
to be re-used. RPS configurations enable
back-to-back or side-by-side deployments. If
a Galaxy SC controller is not already present,
either a Galaxy Millennium SC or Millennium II
controller must be added.
The Ferro / SCR Retrofit Power Solution (RPS)
utilizes 595LT Total Efficiency™ rectifiers
to improve energy efficiency and deliver
centralized management visibility and control.
The 595LT TE rectifiers offer next generation
efficiency approaching 97% with the proven
reliability heritage of 595 rectifiers deployed in
telecom networks for the past 20 years. The
595LT TE rectifiers are managed by
the modern Galaxy Millennium® SC or
Millennium II controllers.
GE has designed RPS cabinets to replace
many combinations of ferro and SCR rectifiers
manufactured by Emerson/Lorain
(RL and RHM series), Lineage Power and
PECO II (3875 and 3876).
01/13 Ferro SCR RPS
The Ferro / SCR Retrofit Power Solution provides
a cost-effective upgrade for the installed base
of legacy telecom power systems. The design
of the RPS cabinet is optimized to minimize
installation time and effort by limiting cabling or
distribution changes. For most applications the
retrofit process can be completed in a
single work shift.
© 2013 General Electric Company. All rights reserved.
On Time Delivery
– Turn-key retrofit service option including
plant assessment
– Fast track deployment
– 24/7 technical support
Total Efficiency
The GE Total Efficiency™ (TE) architecture
reduces energy loss and lowers cooling
costs by 50-70%. TE products will prioritize
sustainable energy sources like solar, wind,
water and fuel cells over traditional utility grid
or diesel generator sources – and they will
intelligently respond to smart grid information
to reduce consumption during peak demand
periods. Active Rectifier Management (ARM)
and Battery Charging Optimization (BCO)
features increase efficiency on current and
legacy power infrastructures. The Total
Efficiency architecture addresses issues endto-end based on our proven experience and
expertise in batteries, power distribution, DC
energy systems, AC-DC power supplies, and
DC-DC board mounted power to deliver a
solution that is more safe, reliable and energy
efficient than competitive alternatives.
TECHN I CAL SPECI FI CATI ON S – FERR O/S CR RPS
Specifications
Input
Environmental Specifications
Nominal Input Voltage
- 595A/LTA
- 595B/LTB
380 Vac/400 Vac/480 Vac, 3-wire plus ground
208 Vac/220 Vac/240 Vac, 3-wire plus ground
Input Current
- 595A/LTA
- 595B/LTB
15.7A @ 480Vac Nominal
36.3A @ 208Vac Nominal
Operating Temperature
0°C to +50°C (32°F to 122°F)
Storage Temperature
-40°C to +85°C (-40 to 185 °F)
Operating Relative Humidity
5-95% non-condensing
Input Frequency Range
47-63 Hz
Power Derating
3% per °C from +55°C to +65°C
Altitude
4000M max
Input Voltage Range (per
phase-phase):
- 595A/LTA
- 595B/LTB
320 Vac to 530 Vac
176 Vac to 260 Vac
Safety and Standards Compliance
Input Frequency Range
47-63 Hz
NEBS
Power Factor
>0.97 at >50% load
Evaluated by independent test lab with NRTL
status to Telcordia GR63 and GR1089 (including
level 3 testing)
Total Harmonic Distortion
<5% at >50% load
Safety
UL Listed (US and Canada): UL Subject 1801 with
applicable sections of UL1950/CSA3 950
Applicable sections of IEC950/EN60950
CE mark meets 72/23/EEC and 93/68/EEC
directives
RoHS
Compliant to RoHS EU Directive 2002/95/EC
EMC
FCC and EN 55022, Class B; FCC, Class B
ESD
EN61000-4-2, Level 4
Output
Voltage Nominal
-48 Vdc
Voltage Adjust Range
-44 Vdc to -58 Vdc
Output Current
(system maximum)
20,000A
Regulation (line and load range)
±0.5%
Ripple
<100 mVrms
Psophometric Noise
<2 mV
Mechanical
Height (cabinet only)
72.0 in. (1,829 mm)
Width (cabinet only)
23.6 in. (600 mm)
(List 102) 26 in. (660.4 mm)
(List 112) 26 in. (660.4 mm)
(List 113) 26 in. (660.4 mm)
(List 201) 48 in. (1219.2 mm)
(List 202) 24 in. (609.6 mm)
(List 301) 24 in. (609.6 mm)
(List 302) 24 in. (609.6 mm)
Depth (cabinet only)
23.6 in. (600 mm)
(List 102) 32 in. (812.8 mm)
(List 112) 32 in. (812.8 mm)
(List 113) 32 in. (812.8 mm)
(List 201) 23.5 in. (596.9 mm)
(List 202) 30 in. (762 mm)
(List 301) 35 in. (889 mm)
(List 302) 35 in. (889 mm)
Weight for 72.0” cabinet
(approximate)
485 lb (220 kg)
Page 2
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
OR D ER I N G I N FOR MATI ON – FER R O/SCR RPS
Ordering Information – Ferro / SCR Retrofit Power Solution
Understanding the Choices
The RPS product line has been designed specifically for the replacement of ferro-resonant / SCR rectifiers. The numerous configurations allow the
user to determine the exact match for the application. Besides recognizing the model number of the ferro-resonant / SCR rectifier and input voltage,
it is important to recognize the installed orientation as part of the replacement strategy. Also when desired, 400 and 800 Amp models can be
ordered with AC input breakers located on the face of each RPS unit.
All RPS selections assume the configuration will match the current AC and DC cable attachment locations that were in the original equipment
design. However, local conditions, at the time of installation may have impacted the final installed design requiring the AC and DC cables to be
replaced. Additionally, cable age and condition may also effect the local decision to reuse these cables or not.
In addition to the listed replacement models, a portable power solution (Watts on Wheels - WOW) is also available. This product is designed to
support temporary power needs during RPS transition or for situations needing additional temporary power.
The following graphics represent the RPS solution installed next to the existing ferro-resonent rectifiers as installed in the stated configurations.
• Back to Back (B2B): Choosing a solution identified as B2B assumes when the original rectifiers were installed, they were aligned back to back.
This single cabinet RPS solution replaces (two rectifiers) both the front and rear rectifiers and utilizes input and output cables as installed.
Page 3
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
OR D ER I N G I N FOR MATI ON – FER R O/SCR RPS
• Side by Side (S by S): Choosing the solution identified as S by S assumes when the rectifiers were installed, they were aligned side by side. This
single cabinet RPS solution replaces (two rectifiers) side by side rectifiers and utilizes input and output cables as installed.
• Single: Or one-for-one replacement allows the user to replace one ferro-resonant rectifier at a time. This choice is exclusive to the 400 and
800 Amp RPS models. This single cabinet RPS solution replaces (one rectifier) and utilizes input and output cables as installed for each ferroresonant rectifier.
Page 4
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
OR D ER I N G I N FOR MATI ON – FER R O/SCR RPS
Step 1: Choose Replacement Solution
Locate the in-service rectifier model identified in the first three columns. Choose the correct input voltage and orientation style (S by S, B2B or Single).
Certain 400/800 Amp models can also be optioned with input AC Breakers.
Manufacturer
Model
TYCO
J85503B1L2
J85503B1L4
J85503B-2
TYCO
AT&T
PECO
PECO
PECO
J85503C1
J85503C2
J85503C3
PEC3874L21
PEC3874L22
PEC3875BL21
PEC3875BL22
PEC3876
Size
200
400
400
200
400
800
Ordering Code
J2010002-AD
Style
208/240V
480V
CC109171732
L151
S by S
208/240
480
CC109171740
L152
B2B
208/240
480
CC109172103
L131
S by S
208/240
480
CC109172111
L131A
S by S
208/240
CC109172128
L131B
S by S
CC109172136
L132
B2B
208/240
CC109172144
L132A
B2B
208/240
CC109172152
L132B
B2B
Yes
480
CC109172160
L133
Single
208/240
L133A
Single
208/240
CC109172185
L133B
Single
Yes
Yes
CC109162244
L101
S by S
208/240
CC109171690
L101A
S by S
208/240
CC109171708
L101B
S by S
CC109162252
L102
B2B
208/240
CC109164694
L112
B2B
208/240
CC109164843
L113
B2B
CC109162260
L103
Single
208/240
CC109171716
L103A
Single
208/240
CC109171724
L103B
Single
CC109172020
L451
S by S
208/240
480
CC109172037
L452
B2B
208/240
480
CC109171930
L401
S by S
208/240
480
CC109171947
L401A
S by S
208/240
CC109171955
L401B
S by S
CC109171963
L402
B2B
208/240
CC109171971
L402A
B2B
208/240
CC109171988
L402B
B2B
Yes
Yes
Yes
208/240
208/240
CC109172012
L403B
Single
CC109172805
L483
1 for 1
Yes
CC109172821
L483B
1 for 1
Yes
480
Yes
480
208/240
Yes
480
480
Single
Yes
Yes
480
Single
Yes
480
480
L403
Yes
480
480
L403A
Yes
480
480
CC109171996
Yes
480
480
CC109172004
Yes
480
480
CC109172177
AC Breaker
Option
Yes
480
480
Yes
Note: Side by Side models are designed to use in single row side by side replacements. Due to dimensional differences, specify back to back models when rectifiers are back to
back and side by side together.
Page 5
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
OR D ER I N G I N FOR MATI ON – FER R O/SCR RPS
Step 1: Choose Replacement Solution (cont.)
Manufacturer
Model
Lorain
RL200D50
RL200E50
Lorain
Lorain
Lorain
RL400D50
RL400E50
RHM800D50
RHM800E50
RHM400
WATTS ON
WHEELS
Size
200
400
800
400
SCR
Ordering Code
J2010002-AD
Style
208/240V
480V
CC109171914
L351
S by S
208/240
480
CC109170775
L352
B2B
208/240
480
CC109171922
L353
4pk
208/240
480
CC109165098
L301
S by S
208/240
480
CC109171848
L301A
S by S
208/240
CC109171856
L301B
S by S
Yes
480
CC109165107
L302
B2B
208/240
CC109171864
L302A
B2B
208/240
CC109171872
L302B
B2B
CC109171880
L303
Single
208/240
CC109171897
L303A
Single
208/240
CC109171906
L303B
Single
CC109172771
L283
1 for 1
CC109172796
L283B
1 for 1
CC109164711
L201
S by S
208/240
CC109164728
L201A
S by S
208/240
CC109171765
L201B
S by S
CC109163597
L202
B2B
208/240
CC109164323
L202A
B2B
208/240
CC109171773
L202B
B2B
CC109171781
L203
Single
208/240
CC109171798
L203A
Single
208/240
CC109171807
L203B
Single
CC109171682
L003
Single
Yes
Yes
480
Yes
480
Yes
480
480
Yes
480
Yes
480
Yes
480
Yes
480
Yes
480
Yes
480
208/240
Yes
480
480
208/240
AC Breaker
Option
Yes
480
Page 6
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
OR D ER I N G I N FOR MATI ON – FER R O/SCR RPS
Step 2: Select Zone 4 Kit (If Required)
Order 1 kit per cabinet where Zone 4 rating is required with B2B versions. *Zone 4 bracing kits are included with
all S by S versions. Zone 4 kits are not required for B2B 200A rectifier replacements as the product meets the zone
4 requirement without the need of the kit.
-48V Distributed Architecture Primary (Control) Bays
Ordering Code
Model
Picture
CC109166971
Zone 4 Kit (Optional with all back to back versions)
J2010002 L501 Required with applications that exceed Zone 2 classification.
One kit required per base.
Step 3: Order Rectifiers
Rectifiers
Output
Ordering Code
Model
108979238
220A, 48Vdc output, 480Vac 3 Phase input rectifier
220A
Picture
595LTA TE
108990405
220A
220A, 48Vdc output, 208Vac 3 Phase input rectifier
595LTB TE
848693586
Spare rectifier fan assembly
(2) required for each rectifier
Page 7
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
OR D ER I N G I N FOR MATI ON – FER R O/SCR RPS
In applications where the RPS solution will be mixed with working ferro-resonant rectifiers, the site must be equipped with the Galaxy Millennium SC
controller. The following six steps (Step 4A - 4F) will define the controller configuration.
If all the ferro-resonant rectifiers are removed, the standalone Millennium II may be used for the application. See Step 4G.
Step 4A: Select Controller
Ordering Code
Description
CC109169280
Galaxy Millennium SC Equipped with onboard M2 controller and BSL3 _MSC
Insulation displacement Alarm Block. (Up to (2) BJC1 or BJC2 circuit cards
per system)
Photo
J2011002 L1
CC109169272
Galaxy Millennium SC without M2
(Up to (2) BJC1 or BJC2 circuit cards per system)
Requires Remote Galaxy Millennium II controller
J2011002 L2
Step 4B: Select Ferro Rectifier Control Card
Ordering Code
Description
Photo
CC109167771
BJC1_MSC
Monitoring board for ATT type rectifiers. Up to 8 Rectifiers per circuit card
J2011002 L21
CC109167788
BJC2_MSC
Monitoring board for non-ATT rectifiers. Up to 8 Rectifiers per circuit card
J2011002 L22
Page 8
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
OR D ER I N G I N FOR MATI ON – FER R O/SCR RPS
Step 4C: Select Alarm Card
Note: List 1 and List 2 systems are E/W BSL3_MCS
Ordering Code
Description
CC109170123
BSL3_MSC
Insulation Displacement Alarm Termination Board
Photo
Included with List 1
J2011002 L40
CC109170131
BSL4_MSC
Wire-Wrap Alarm Termination Board
Order separately as a field installed card
J2011002 L41
CC109170362
BSM6
Modem E/W Power Connector Cable
J2011002 L81
CC109130630
MCR1B-MCR2B
M2 Controller Circuit Card
Included with List 1
Step 4D: Select Rectifier Interface Module (RIM)
Ordering Code
Description
108028671
For use with List 21, MSC style 24-pin cable, connects up to 8 Lineage ferros
without enhanced communications
Photo
J2011002 L31
108028697
For use with List 21, 40-pin cables, connect up to 8 J55 Series Lineage ferros
with enhanced communications
J2011002 L32
108028689
For use with List 22 , 40-pin, connects up to 8 commercial ferro rectifiers with
shunt signals
J2011002 L34
108572660
For use with List 22 , 40-pin, connects up to 8 ECS style SMR ferro rectifiers with
shunt signals
J2011002 L35
Page 9
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
OR D ER I N G I N FOR MATI ON – FER R O/SCR RPS
Step 4E: Select Control Cables
Ordering Code
Description
List
H285-226 G63 Control Cable (Commercial RIM) all commercial rectifiers
108967290
60 ft long, H285 G62 control cable (Commercial RIM). All commercial rectifiers
For use with L34
List 150
108969486
100 ft long, H285 G62 control cable (Commercial RIM). All commercial rectifiers
For use with L34
List 151
H285-226 G60 Control Cable (Ferro Enhanced RIM) J8550x -48V Ferro or J85702H -48V PXS with GCM Interface
108967258
35 ft long, H285-226 G60 control cable (Ferro Enhanced RIM) J8550X -48V Ferro or J85702H -48V PXS
with GCM interface.
For use with L32
List 152
108967274
60 ft long, H285-226 G60 control cable (Ferro Enhanced RIM) J8550X -48V Ferro or J85702H -48V PXS
with GCM interface.
For use with L32
List 153
108969478
100 ft long, H285-226 G60 control cable (Ferro Enhanced RIM) J8550X -48V Ferro or J85702H -48V PXS
with GCM interface.
For use with L32
List 154
H285-226 G5 Control Cable (MCS Compatible RIM) J8550x -48V Ferro or J85702H -48V PXS with GCM Interface
108967175
15 ft long, H285-226 G5 control cable (MSC compatible RIM) J8550X -48V Ferro or J85702H -48V PXS
with GCM interface
For use with L31
List 155
108967183
25 ft long, H285-226 G5 control cable (MSC compatible RIM) J8550X -48V Ferro or J85702H -48V PXS
with GCM interface
For use with L31
List 156
108967191
35 ft long, H285-226 G5 control cable (MSC compatible RIM) J8550X -48V Ferro or J85702H -48V PXS
with GCM interface
For use with L31
List 157
108967217
60 ft long, H285-226 G5 control cable (MSC compatible RIM) J8550X -48V Ferro or J85702H -48V PXS
with GCM interface
For use with L31
List 158
108969460
100 ft long, H285-226 G5 control cable (MSC compatible RIM) J8550X -48V Ferro or J85702H -48V PXS
with GCM interface
For use with L31
List 159
108967316
40 ft long, H285-226 G61 control cable (SMR compatible RIM) J85702B-2 L-5 -48V SMR shelf with 364A
(50A SMR shelf)
For use with L35
List 160
108967308
40 ft long, H285-226 G63 control cable (SMR compatible RIM) J85702E-2 -48V SMR
For use with L35
List 161
Serial Cables for List 2 (with remote M2)
847690799
10' serial
List 200
847865425
25' serial extension cable includes coupler
List 201
Page 10
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
OR D ER I N G I N FOR MATI ON – FER R O/SCR RPS
Step 4F: Order Standalone Millennium II Controller
Note: This controller option can only be used if all ferro-resonant rectifiers are removed.
Millennium II Rack Mount Controller
Ordering Code
Description
CC109132024
Millennium II Controller in a rack mount configuration (for switch mode rectifiers only)
CC109111077
Millennium II spare controller circuit card, MCR1B-MCR2B
Page 11
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
OR D ER I N G I N FOR MATI ON – FER R O/SCR RPS
Step 5: Select Remote Peripheral Monitoring Options
Ordering Code
Description
Photo
Modules
# Inputs
# Temp
108469461
J85501G1L21 RPM Shunt Monitoring (221F)
6
1
108469479
J85501G1L22 RPM Voltage 0-200VDC (221D)
6
1
108469495
J85501G1L23 RPM Transducers (221J)
6
1
108298431
J85501G1L24 RPM Voltage 0-3VDC (221A)
6
1
108298498
J85501G1L25 RPM Voltage 0-16VDC (221B)
6
1
108469503
J85501G1L26 RPM Voltage 0-70VDC (221C)
6
1
108298449
J85501G1L27 RPM Binary (222A)
6
1
108483538
J85501G1L28 RPM Temperature (223T)
0
7
108298456
J85501G1L9 RPM Control Relay (214A)
3
0
Supporting Material
407377704
Connecting Cable for RPMs (Order by foot)
848535332
Blue panel for mounting 6 modules above a GPS cabinet
847307410
12’ Cable to be used with Temperature Probes
847917879
½” Diameter Ring Terminal Temperature Probe (Cable Required)
848528881
5/16” Diameter Ring Terminal Temperature Probe (Cable Required)
405298308
Termination Resistor (1 per bus)
406712968
Ferrite Bead (1 per bus)
403607955
Monitor Channel cable KS13385 22AWG stranded pair, R&Bk (order by the foot)
108984477
23” grey panel, 6 RPM mounting panel for Lorain plants
Millennium Remote Monitoring
Millennium II
Intelligent
Controller
2 loops through 406712968 ferrite bead
prior to termination onto Millennium II
TB1 6/8 (7 shield)
Bus 1
Up to 300 Meters Each Bus
(980 Ft.Max.)
Up to 85 Remote Modules
Up to 6 Points Each Module
(Up to 510 Points)
1
TB200
22 AWG has a 300 ft. max. one way
cable length between Remote Module
and monitored point. Order 403607955 by the foot.
407377704 20 AWG 2
conductor standed
W/ground shielded wire.
Engine
Alternator
Plant 1
Distribution
Denotes Remote Monitoring Modules
Plant 1
Batteries
Denotes Last Remote Monitoring Module on bus.
A 560 ohm, 10 watt Terminating Resistor is
required for proper operation.
AC
Distribution
Plant 2
Batteries
Page 12
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
OR D ER I N G I N FOR MATI ON – FER R O/SCR RPS
Step 6: Select Optional AC Monitoring Equipment
AC Monitoring Options
Ordering Code
Description
Photo
Configured Panels
CC408646005
3P/3W 208/240V Line to Line, 10x12x14 box provides current, voltage, and power
CC408646046
3P/3W 480V Line to Line, 10x12x14 box provides current, voltage, and power
CC408646054
3P/4W 208V Line to Neutral, 10x12x14 box provides current, voltage, and power
Transducers
CC408645808
1-phase AC Current Transducer (Built-in CT; 150A max current; 350 kcmil max
conductor size)
CC408645816
1-phase AC Voltage Transducer 120V
CC408645824
1-phase AC Voltage Transducer 208/240V
CC408644537
3-phase AC Voltage Transducer 208/240V Line to Line
CC408645741
3-phase AC Voltage Transducer 208/240V Line to Neutral (120V)
CC408645832
3-phase AC Voltage Transducer 480V Line to Line
CC408645840
3-phase AC Current Transducer
Current Transformers (Required for configured panels and current transducers)
CC408645857
Current Transformer, 200A primary, 5A secondary, 4 in inside diameter
408524862
Current Transformer, 400A primary, 5A secondary, 4 in inside diameter
CC408645865
Current Transformer, 600A primary, 5A secondary, 6 in inside diameter
CC408645873
Current Transformer, 800A primary, 5A secondary, 6 in inside diameter
CC408645881
Current Transformer, 1000A primary, 5A secondary, 8 in inside diameter
CC408645898
Current Transformer, 1200A primary, 5A secondary, 8 in inside diameter
Miscellaneous
CC408645907
Barrier terminal block to extend the CT secondary leads beyond their 12 ft factory length. Use 12 AWG THHN wire in conduit.
CC408645915
Bud Industries Wall Box (12H x 10W x 8D) w/captive screw cover & internal mounting panel. For mounting transducers
Page 13
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
OR D ER I N G I N FOR MATI ON – FER R O/SCR RPS
Step 7: Select Battery Monitoring
Ordering Code
Description
CC109142980
QS873A Thermal Probe (A)
Photo
CC848817024
10 ft wire set
CC109157434
20 ft wire set
(B: thermal probe to controller)
CC848822560
1 ft wire set
(C: thermal probe to thermal probe)
848719803
5 ft wire set
(C: thermal probe to thermal probe)
CC848822321
10 ft wire set
(C: thermal probe to thermal probe)
850027334
20 ft wire set
(C: thermal probe to thermal probe)
108958422
ES771A Battery Voltage Monitor Card
CC848791517
2-1/2 ft wire set
(D: ES771A to thermal probe)
CC848797290
6 ft wire set
(D: ES771A to thermal probe)
848719829
10 ft wire set
(D: ES771A to thermal probe)
CC848791500
4 ft wire set
(G: ES771A to ES771A or controller)
848652947
10 ft wire set
(G: ES771A to ES771A or controller)
555052-1
In-Line Coupler (for extending item G above)
(B: thermal probe to controller)
Temperature/Voltage probes are needed for battery monitoring. They are connected to each battery or battery string to provide slope thermal compensation, temperature
alarms and voltage imbalance alarms.
Temperature Measurement
Temperature and Voltage Measurement
Page 14
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
Notes:
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................................................................................................
Page 15
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
ORDERING INFORMATION – ADDITIONAL INFO
Management Visibility
Service & Support
Galaxy Manager™ software is the centralized visibility and control
component of a comprehensive power management system designed
to meet engineering, operations and maintenance needs. The Galaxy
Manager client-server architecture enables remote access to system
controllers across the power network.
GE Energy field service and support personnel are trusted advisors
to our customers – always available to answer questions and help
with any project, large or small. Our certified professional services
team consists of experts in every aspect of power conversion with
the resources and experience to handle large turnkey projects along
with custom approaches to complex challenges. Proven systems
engineering and installation best practices are designed to safely
deliver results that exceed our customers’ expectations.
• Dashboard display with one-click access to management
information database
• Trend analysis
Warranty
• Scheduled or on demand reports
• Fault, configuration, asset, and performance management
Training
GE Energy offers on-site and classroom training options based on
certification curriculum. Technical training can be tailored to individual
customer needs. Training enables customers and partners to more
effectively manage and support the power infrastructure. We have built
our training program on practical learning objectives that are relevant
to specific technologies or infrastructure design objectives.
GE Energy is committed to providing quality products and solutions.
We have developed a comprehensive warranty that protects you and
provides a simple way to get your products repaired or replaced as
soon as possible.
For full warranty terms and conditions please go to
www.ge.com/powerelectronics.
Contact Us
For more information, call us toll free
at +1 877 546 3243, or +1 972 244 9288
and visit us on the web at
www.ge.com/powerelectronics
01/13 Ferro SCR RPS
© 2013 General Electric Company. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising