Installation Instructions for SYCOM Plug-in Strip

Installation Instructions for SYCOM Plug-in Strip
Installation Instructions for SYCOM Wall Mount Protectors
1. Plug the SYCOM protector directly into the AC wall socket.
2. If equipped with telephone protection, connect telephone line into the input
telco jack using supplied telco cord. Connect telephone cable from the
equipment into the output jack.
3. Connect the equipment line cords into the AC receptacles of the SYCOM
protector
4. If equipped with Coax cable protection, connect the cable from the outside
to the input jack and the TV cable to the output jack.
Installation Instructions for SYCOM Plug-in Strip Protectors
1. Connect the equipment to the protector using the existing telephone cord
to connect to the output jack.
2. Connect the AC cords of the equipment to the plug-in protector
3. Connect the surge protector cord AC wall outlet jack
4. Turn on the protector using the on/off switch of the protector
5. The indicator lights should be on after the unit has been installed.
6. If the unit has Coax cable protection, connect the cable from the outside to
the input jack and the TV cable to the output jack
Sycom Surge, Inc.
12929 44th St N
Clearwater, FL 33762
(800) 622-9904
www.sycomsurge.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising