P-ZV1 v.1.0/I CODE: TYPE: EN** Video circuit surge protection (BNC

P-ZV1 v.1.0/I CODE: TYPE: EN** Video circuit surge protection (BNC
Pulsar
Video circuit surge protection (BNC socket – BNC socket)
CODE:
TYPE:
P-ZV1
EN**
v.1.0/I
P- ZV1 Video circuit surge protection (BNC socket – BNC socket)
DESCRIPTION
Atmospheric discharges produce a very large amount of energy, which induces surges in power networks, causing
damage to electrical and electronic equipment.
The P-ZV1 is designed for surge protection of video devices, i.e. cameras, video recorders, monitors. The device
includes gas protectors, which allow absorbing voltage spikes and discharging loads to the ground through protective
(PE) conductor. Proper protection of the devices depends on proper grounding or protective (PE) conductor.
The housing is made of aluminum to provide good shielding of the system and resistance to mechanical damage.
To fully protect the device, both power supply circuit and video circuit should be protected.
In the case of devices powered from DC12V, it can be done using the P-Z12V1surge protector.
TECHNICAL DATA
The rated voltage of the protected circuit UN
Maximum Continuous Operating Voltage UC
Nominal discharge current (8/20μs) wire-ground ISN (IN)
Maximum discharge current
Operation temperature
Protection class
Input/Output impedance / connector type
Dimensions
Net / gross weight
Declarations, warranty
5V
8,8V
5kA
10kA
-25°C ÷ 60°C
IP20
75Ω / BNC socket
25 x 25 x 83mm
0,09kg/0,10kg
CE, one year from the production date
Fig. 1. Camera Surge Protection (video circuit)
Fig. 2. Camera and Monitor Surge Protection (video circuit)
wyjście TAMPER : przewody 30cm
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising