Active control system

Active control system
Next
Active control system
R.C.S. control
GB
USER’S MANUAL
OPERATING INSTRUCTIONS
BLK BUTTON
PSY BUTTON
• After the ‘power on’ or after a RESET, push this
button to perform BLACKOUT (all lamps off).
• Push this button to activate PSY function.
The lamps are on for only 0,5 second.
• In blackout mode by UP - DOWN - PSY MODE buttons you can switch on or off
manually each lamp.
• Push it again to return to normal mode.
• Now each time you press BLK button, Xlight
show the last combination of lamps you made
manually.
• To have again the BLACKOUT FUNCTION
when pressing BLK button, you must turn off
manually all the lamps.
Push this button for over two seconds to
activate a GENERAL RESET.
This function is useful if you must sincronize
more Xlights connected togheter.
MODE BUTTON
Push this button to select sequentially these functions:
• SEQUENTIAL FUNCTION
Xlight is in sequential mode.
• MUS FUNCTION (music)
By this function the game runs with music
signal.
N.B. By this function, game runs only if a signal
is picked up by internal microphone.
• FILL FUNCTION
By this function the lamps are always on.
GAME BUTTON
• Push this button to activate the MANUAL
GAME SELECTION.
• Push it again to select one game (1÷16).
• Push this button for over two seconds to
activate the AUTOMATIC GAMES SELECTION.
All games will be repeated 4 times each one.
• To return to 100% light intensity push it
again for over two seconds.
This light dimmer offer the advantage to
exclude noise in audio systems.
UP BUTTON
▲
• Push this button to increase the game speed.
DW BUTTON
▲
• Push BLK button again to return in normal mode.
• Push this button for over two seconds to
activate ZERO-CROSSING DIMMER.
The lamps light intensity is reduced to 50%.
• Push this button to decrease the game speed
until stop.
• When game is stopped you can create light
combination pressing the game button.
N.B. There are two separated speed adjustments
for Sequential and Music mode.
INSTALLING INSTRUCTIONS
POWER SUPPLY CONNECTION
Connect the power plug in a 220V 50/60 Hz current socket.
Be sure that current socket is able to delivery required current.
LAMP TYPE / TOTAL CURRENT LOAD (when the FILL function is active)
4 X 300 W = 1,2 KW 5,5 A
4 X 500 W = 2 KW 9 A
4 X 650 W = 2,6 KW 12 A
• Zero Crossing system has been conceived for longer lamps life and to exclude noise in
audio systems.
R.C.S. REMOTE CONTROL CONNECTION
R.C.S. IN rear input (JACK MONO) allows to control all Xlight’s function by an external control
(Manual or foot switches).
If you do not connect this input Xlight starts automatic games selection.
Connect in R.C.S. input external control made by Next only !
MULTIPLE Xlight CONNECTIONS
You can control several Xlights by one Remote Control.
Insert R.C.S. control plug in R.C.S. IN of the first Xlight. Connect a JACK MONO cable between
R.C.S. OUT of the first and R.C.S. IN of the second.
The operation is the same iven if you use more than two Xlights.
NOTE: Disconnect power supply before connection.
Sincronize all Xlight pushing BLK button for over two seconds.
Xlight N°1
Xlight N°2
Xlight N°..
R.C.S.
IN OUT
R.C.S.
IN OUT
R.C.S.
IN OUT
TECHNICAL SPECIFICATION:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
220/240 Vac - 50/60 Hz single-phase supply.
4 channels.
Microprocessor controlled.
16 programmed games.
Automatic or manual games selection.
Music / Sequential / Psycosequential functions.
Fill and Blackout functions.
Zero-crossing Dimmer (50% /100%).
Separated electronic speed adjustment for music or sequential mode.
Internal microphone with automatic level control.
R.C.S. input for external remote control of all functions or foot switches.
R.C.S. output for other Xlight control.
Movement and 360° turn of the 4 PAR 56.
Zero-crossing system: no audio noise and longer lamps life.
Internal fuse for each channel.
Optocoupled power stage with 16 A / 600 V triacs.
NET WEIGHT: 8 Kg - 16,5 Kg with Flight case.
FLIGHT CASE DIMENSION: W-H-D 70 x 63 x 27 cm.
INCLUDE:
• 4 PAR 56 aluminium spot.
• 1 Remote control R.C.S. with 7,5 m cable.
• 1 Aluminium/quality wood Flight Case.
ACCESSORIES
•
•
•
•
1÷6 channels foot switch for all functions.
Iron lighting stand (180÷320 cm - 5 Kg.).
Professional 3 sections aluminium lighting stand (95÷280 cm - 3,2 Kg).
Soft case for one or two professional lighting stands.
N.B. We reserve the right to apport modify without notice.
CODEM MUSIC S.r.l. - Via G.Pierini, 13 - 61100 PESARO - ITALY
Tel. +39 0721 204357 - Fax +39 0721 203554
www.codemmusic.com - www.wi-dmx.com - info@codemmusic.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising