Slave Profibus for solenoid valves series 2400

Slave Profibus for solenoid valves series 2400
Series 2400
Serial systems
INDEX
· Slave Profibus for solenoid valves series 2400
5300.32.00
5350.32.00
5300.24.08I
5300.16.16I
Accessories
Slave PROFIBUS DP 32 Outlets for IP65 base
Slave PROFIBUS DP 32 Outlets for 9 PIN IP40 base conn.
Slave PROFIBUS DP 24 Outlets for + 8 IP65 inlets
Slave PROFIBUS DP 16 Outlets for + 16 IP65 inlets
· Slave DeviceNet for solenoid valves series 2400
5400.32.00
5450.32.00
5400.32.08I
5400.32.16I
Accessories
Slave DeviceNet 32 Outlets IP65
Slave DeviceNet 32 Outlets IP40
Slave DeviceNet 32 Outlets + 8 Inlets IP65
Slave DeviceNet 32 Outlets + 16 Inlets IP65
· Slave CanOpen for solenoid valves series 2400
5500.32.00 Slave CanOpen 32 Outlets IP65
5550.32.00 Slave CanOpen 32 Outlets IP40
5500.32.08I Slave CanOpen 32 Outlets + 8 Inlets IP65
5500.32.16I Slave CanOpen 32 Outlets + 16 Inlets IP65
Accessories
5500.16.00 5500.16.04A Slave CanOpen 16 Outlets IP65
· Slave AS-Interface for solenoid valves series 2400
24A8.37.10 Slave ASI 8 Outlet + 8 Inlets IP65
Accessories
1
Series 2400
Serial systems
Slave CanOpen 32 Outlet IP65
General:
The module is being integrated with 2400 series solenoid valves manifold by replacing the 37
pole connector normally used for the multipolar connection; it is necessary to use multipolar
modules for PNP standard outlets.
The module can handle up to 32 solenoid valves (16 solenoid valve bistable).
The M16 4 poles male power supply connector allows to divide the node power supply from the
one of outlets, this allows to switch off the outlets maintaining the supply to the node.
Connection to net CanOpen is possible via 2 connectors M16 5 poles female, being the
connectors in parallel.
The node address can be set by internal switch by utilizing BCD numeration, the 2 digit display
on the cover shows the selected address.
Transmission speed can be set through proper internal switch.
The module can host an internal terminating resistance to be inserted by means of switch.
Ordering code
5500.32.00
Scheme / Overall dimensions and I/O layout :
NET
M16 Connector - 5 Pole Female
(According to standard IEC 60130-9)
NODE ADDRESS
POWER SUPPLY
M16 Connector - 4 Pole Male
(According to standard IEC 60130-9)
Technical characteristics
Power supply
Outlets
Net
Model
Protocol
Spec
External casing
Power supply connection
Voltage
Node consumption (Outlets excluded)
Power supply diagnosis
PNP equivalent outlet
Maximum outlet current
Maximum outlets n.
5500.32.00
CanOpen
Draft Standard 301 V 4.02 – Feb. 2002
Reinforced technopolymer
M16 connector 4 Pole Male
+24 VDC +/- 10%
90 mA
Green led PW
+24 VDC
100 mA
32
Maximum n. outlets that can be actuated simult. 32
Internal fuse
5A
Connection to net
M16 2 connectors 5 Pin female
Transmission speed
10 – 25 - 50 – 125 – 250 – 500 – 800 -1000 Kbit/s
Addresses, possible numbers
from 1 to 99
Maximum n. of node
128
Maximum bus length
100 m to 1000 Kbit/s
Bus diagnosis
Green led + red led
Configuration file
Pnx_co.eds
Protection degree
IP65 (node and connector mounted)
Ambient temperature
from -0° to +50° C
15
Series 2400
Serial systems
Slave CanOpen 32 Outlet for Ip40 base
General:
The module is being integrated with 2400 series solenoid valves manifold by replacing the 37
pole connector normally used for the multipolar connection; it is necessary to use multipolar
modules for PNP standard outlets.
The module can handle up to 32 solenoid valves (16 solenoid valve bistable).
The M16 4 poles male power supply connector allows to divide the node power supply from the
one of outlets, this allows to switch off the outlets maintaining the supply to the node.
Connection to net CanOpen is possible via connector 9 poles Sub D.
The node address can be set by internal switch by utilizing BCD numeration, the 2 digit display
on the cover shows the selected address.
Transmission speed can be set through proper internal switch.
Ordering code
5550.32.00
Scheme / Overall dimensions and I/O layout :
4
5
9
2
3
1
8
7
6
PIN
1
2
3
4
5
6
7
8
9
DESCRIPTION
CAN_L
CAN_GND
CAN_GND
CAN_H
(CAN_V+)
NET
9 Pole Connector Sub D Male
NODE ADDRESS
POWER SUPPLY
M16 Connectors 4 Pole Male
(According to standard IEC 60130-9)
Technical characteristics
Power supply
Outlets
Net
Model
Protocol
Spec
External casing
Power supply connection
Voltage
Node consumption (outlets excluded)
Power supply diagnosis
PNP equivalent outlet
Maximum voltage each outlet
Outlets, maximum numbers
5550.32.00
CanOpen
Draft Standard 301 V 4.02 – Feb. 2002
Reinforced technopolymer
M16 4 Pole male connector
+24 VDC +/- 10%
90 mA
Green led PW
+24 VDC
100 mA
32
Maximum n. outlets that can be actuated simult. 32
Internal fuse
5A
Connections to net
9 pole connector, Sub D female
Transmission capability
10 – 25 - 50 – 125 – 250 – 500 – 800 -1000 Kbit/s
Addresses, possibile numbers
from 1 to 99
Node, maximum numbers
128
Bus maximum lengths
100 m to 1000 Kbit/s
Diagnosis bus
Green led + Red led
Configuration file
Pnx_co.eds
Protection degree
IP40
Ambient temperature
16
from -0° to +50° C
Serial systems
Slave CanOpen 32 Outlet + 8 Inlet IP65
Series 2400
General:
The module is being integrated with 2400 series solenoid valves manifold by replacing the 37
pole connector normally used for the multipolar connection; it is necessary to use multipolar
modules for PNP standard outlets.
The module can handle up to 32 solenoid valves (16 solenoid valve bistable).
The M16 4 poles male power supply connector allows to divide the node power supply from the
one of outlets, this allows to switch off the outlets maintaining the supply to the node.
Connection to net CanOpen is possible via 2 connector M16 5 poles female, the connectors
being in parallel.
The node address can be set by internal switch by utilizing BCD numeration, the 2 digit display
on the cover shows the selected address.
Transmission speed can be set through proper internal switch.
The module requires internal resistance to be connected by switch.
A max. of n. 8 Inlets can be connected, through 4 M12 female connector on the cover: 1 or 2 inlets
can be connected to each connector, being the inlets 2 wires type ( switch, pressure switch,
magnetic stop…) or 3 wires type ( proximity, photocell, magnetic and elect.stop…)
Ordering code
5500.32.08I
Scheme / Overall dimensions and I/O layout :
NET
M16 Connector - 5 Pole Female
(According to standard IEC 60130-9)
NODE ADDRESS
INLETS
M12 Connector - 5 Pole Female
(According to standard IEC 60947-5-2)
POWER SUPPLY
M16 Connector - 4 Pole Male
(According to standard IEC 60130-9)
Technical characteristics
Power supply
Outlets
Inlets
Net
Model
Protocol
Spec
External casing
Power supply connection
Voltage
Node consumption (outlets excluded)
Power supply diagnosis
PNP equivalent outlet
Maximum voltage each outlet
Outlets, maximum numbers
5500.32.08I
CanOpen
Draft Standard 301 V 4.02 – Feb. 2002
Reinforced technopolymer
M16 4 Pole male connector
+24 VDC +/- 10%
117 mA
Green led PW
+24 VDC
100 mA
32
Maximum n. outlets that can be actuated simult. 32
Internal fuse
5A
PNP 8 equivalent inlets
+24 VDC +/- 10%
Maximum Inlet current
10 mA
Inlets connections
N. 4 Circular Connector M12 5 pole female (IEC 60947-5-2)
Connections to net
M16 2 connectors 5 Pin female
Transmission capability
10 – 25 - 50 – 125 – 250 – 500 – 800 -1000 Kbit/s
Addresses, possible numbers
from 1 to 99
Node, maximum numbers
128
Bus maximum lengths
100 m to 1000 Kbit/s
Diagnosis bus
Green led + Red led
Configuration file
Pnx_co_e.eds
Protection degree
IP65 (node and connector mounted)
Ambient temperature
from -0° to +50° C
17
Serial systems
Slave CanOpen 32 Outlet + 16 Inlet Ip65
Series 2400
General:
The module is being integrated with 2400 series solenoid valves manifold by replacing the 37
pole connector normally used for the multipolar connection; it is necessary to use multipolar
modules for PNP standard outlets.
The module can handle up to 32 solenoid valves (16 solenoid valve bistable).
The M16 4 poles male power supply connector allows to divide the node power supply from the
one of outlets, this allows to switch off the outlets maintaining the supply to the node.
Connection to net CanOpen is made via 2 x M16 5 pole female connectors, the connectors
being in parallel.
The node address can be set by internal switch by utilizing BCD numeration, the 2 digit display
on the cover shows the selected address.
Transmission speed can be set through proper internal switch.
The module requires internal resistance to be connected by switch.
A max. of n 16 Inlets via 8 connectors M12 female connector on the cover: 1 or 2 inlets can be
connected to each connector, being the inlets 2 wires type ( switch, pressure switch, magnetic
stop…) or 3 wires type ( proximty, photocell, magnetic and electronic stop…)
Ordering code
5500.32.16I
Scheme / Overall dimensions and I/O layout :
NET
M16 Connector - 5 Pole Female
(According to standard IEC 60130-9)
NODE ADDRESS
INLETS
M12 Connector - 5 Pole Female
(According to standard IEC 60947-5-2)
POWER SUPPLY
M16 Connector - 4 Pole Male
(According to standard IEC 60130-9)
Technical characteristics
Power supply
Outlets
Inlets
Net
Model
Protocol
Spec
External casing
Power supply connection
Voltage
Node consumption (outlets excluded)
Power supply diagnosis
PNP equivalent outlets
Maximum voltage each outlet
Outlets, maximum numbers
5500.32.16I
CanOpen
Draft Standard 301 V 4.02 – Feb. 2002
Reinforced technopolymer
M16 4 Pole male connector
+24 VDC +/- 10%
125 mA
Green led PW
+24 VDC
100 mA
32
Maximum n. outlets that can be actuated simult. 32
Internal fuse
5A
PNP 8 equivalent inlets
+24 VDC +/- 10%
Maximum Inlet current
10 mA
Inlets connections
N. 8 Circular Connector M12 5 pole female (IEC 60947-5-2)
Connections to net
M16 2 connectors 5 Pin female
Transmission capability
10 – 25 - 50 – 125 – 250 – 500 – 800 - 1000 Kbit/s
Addresses, possibile numbers
from 1 to 99
Node, maximum numbers
128
Bus maximum lengths
100 m to 1000 Kbit/s
Diagnosis bus
Green led + Red led
Configuration file
Pnx_co_e.eds
Protection degree
IP65 (node and connector mounted)
Ambient temperature
18
from -0° to +50° C
Series 2400
Accessories
Straight outlet
PG9
Ordering code
5300.F04.00.00
Upper view
Slave connector
3
2
4
1
PIN
1
2
3
4
DESCRIPTION
0V
SHIELD
+ 24 node
+ 24 connections
FOR TYPE:
5500.32.00 - 5550.32.00 - 5500.32.08I - 5500.32.16I
Straight outlet
for CanOpen bus
Upper view
Slave connector
Ordering code
3
5300.M05.00.00
FOR TYPE:
5500.32.00 - 5500.32.08I - 5500.32.16I
Angular pin M12
5 poles
(IEC 60947-5-2)
Ordering code
2
4
5
1
PIN
1
2
3
4
5
DESCRIPTION
(CAN_SHIELD)
(CAN_V+)
CAN_GND
CAN_H
CAN_L
Upper view
Slave connector
5
3
4
5300.M12.00.00
2
PIN
1
2
3
4
5
DESCRIPTION
+ 24 V
SIGNAL B
-0V
SIGNAL A
SHIELD
PIN
1
2
3
4
5
DESCRIPTION
+ 24 V
SIGNAL B
-0V
SIGNAL A
SHIELD
1
FOR TYPE:
5500.32.08I - 5500.32.16I
Straight pin M12
5 poles
(IEC 60947-5-2)
Ordering code
Upper view
Slave connector
5
3
4
5312.A.M05.00
2
1
FOR TYPE:
5500.32.08I - 5500.32.16I
M16 Plug
M12 Plug
Ordering code
Ordering code
5300.T16
5300.T12
FOR TYPE:
5500.32.00 - 5500.32.08I - 5500.16I
FOR TYPE:
5500.32.08I - 5500.32.16I- 5500.16.00
19
Series 2400
Serial systems
Slave CanOpen 16 Outlet for Ip65
General:
The module is being integrated with 2400 series solenoid Valves manifold by replacing the 37
pole connector normally used for the multipolar connection;it is necessary to use multipolar
modules for PNP standard outlets. The module can handle up to 16 solenoid valves (8 solenoid
valves bistable).
Power supply connector is a standard 9 poles Sub D, allows to divide the node feeding from the
one of outlets, letting the node feeded but the outlets without power supply.
Connection to net CanOpen is possible via 2 connector M12 5 pole male-female,being the
connectors in parallel.
The node address can be set by 6 switch by utilizing BCD numeration from 1 to 63.
Transmission speed can be set through 2 switch.
The module can’t host an internal terminating resistance.
Ordering code
5500.16.00
5500.16.4A*
*It allows to feed 4 outlets simultaneously but switching off them partially in case of emergency.
Scheme / Overall dimensions and I/O layout :
5500.16.00
PIN
1
2
3
4
5
6
7
8
9
POWER SUPPLY
9 Pole Connector Sub D Male
NET
M12 Connector - 5 Pole Male
(According to standard IEC 60947-5-2)
DESCRIPTIONS
24 VDC for outlets
24 VDC for outlets
24 VDC for outlets
24 VDC for outlets
24 VDC for node
Common
Common
Common
Common
2
1
MODULE 2 positions Ip65
DX Vacum (Senza CS)
(PNM0104)
4
3
5
NET
M12 Connector - 5 Pole Female
(According to standard IEC 60947-5-2)
6
POWER SUPPLY
9 Pole Connector Sub D Male
Technical characteristics
NET
M12 - 5 Pole Female
(According to standard IEC 60947-5-2)
Outlets
Net
PIN
1
2
3
4
5
6
7
8
9
Model
Protocol
Spec
External casing
Power supply connection
Voltage
Node consumption (outlets excluded)
PNP equivalent outlets
Maximum current each inlet
Outlets, maximum numbers
9
DESCRIPTIONS
Power supply 24 VDC for outlets 1-2-3-4
Power supply 24 VDC for outlets 5-6-7-8
Power supply 24 VDC for outlets 9-10-11-12
Power supply 24 VDC for outlets 13-14-15-16
24 VDC for node
Common
Common
Common
Common
5500.16.00
CanOpen
Draft Standard 301 V 4.02 – Feb. 2002
Reinforced technopolymer
9 Pole connector sub D Male
+24 VDC +/- 10%
50 mA
+24 VDC
100 mA
16
Maximum n. outlets that can be actuated simult. 16
Connections to net
2 connector M12 5 Poles Male-Female (IEC 60947-5-2)
Transmission capability
125 - 250 - 500 - 1000 Kbit/s
Addresses, possibile numbers
from 1 to 63
Node, maximum numbers
128
Bus maximum lengths
100 m to 1000 Kbit/s
Diagnosis bus
Green Led + Red Led
Configuration file
PnxS106.eds
Protection degree
IP65 (node and connector mounted)
Ambient temperature
20
8
5500.16.4A
NET
M12 - 5 Pole Male
(According to standard
IEC 60947-5-2)
Power supply
7
from -0° to +50°C
Series 2400
Accessories
Straight connect.
M12A 5P male
for CanOpen
Ordering code
Upper view
Slave connector
5
3
4
5312A.M05.00
2
PIN
1
2
3
4
DESCRIPTION
(CAN_SHIELD)
(CAN_V+)
CAN_GND
CAN_H
5
CAN_L
PIN
1
2
3
4
DESCRIPTION
(CAN_SHIELD)
(CAN_V+)
CAN_GND
CAN_H
5
CAN_L
1
FOR TYPE:
5515.32.00 - 5500.16.00 - 5500.16.4A
Straight connect.
M12A 5P female
for CanOpen
Ordering code
Upper view
Slave connector
5
4
3
5312A.F05.00
1
FOR TYPE:
5515.32.00 - 5500.16.00 - 5500.16.4A
M12 Plug
Ordering code
5300.T12
FOR TYPE:
5515.32.00 - 5500.16.00 - 5500.16.4A
22
2
Series 2400
Serial systems
Slave ASI 8 Outlet + 8 Inlet Ip65
General:
The Pneumax AS-Interface module is an integrated device developed to control the 2400 series
valves; it is fully compliant with the AS-Interface norms “Complete Specification Slave Profiles
7.0, Version 2.1, Revision 1”.
The AS-Interface system allows the communication of four (4) bits of I/O and four (4) bits of
parameters between the master and any slave connected on the line.
The Pneumax AS-Interface module comprises two AS-Interface slaves integrated in one single
unit therefore the master reads them as two separate entities each one with four outputs and four
inputs and with different address in the master memory.
The module is supplied with both slaves addressed to 0 (Zero).
The electrical connection is achieved by means of granting IP 65 protection grade.
Ordering code
24A8.37.10
Scheme / Overall dimensions and I/O layout :
POWER SUPPLY
Cable piercing connector
INLETS
M8 Connector - 3 Pole Male
(According to standard IEC 60947-5-2)
NET
Cable piercing connector
POWER SUPPLY
Cable piercing connector
NET
INLETS
Cable piercing connector
M8 Connector - 3 Pole Male
(According to standard IEC 60947-5-2)
POWER SUPPLY
Cable piercing connector
INLETS
M8 Connector - 3 Pole Male
(According to standard IEC 60947-5-2)
Technical characteristics
Power supply
26
Outlets
Inlets
Net
NET
Cable piercing connector
Model
Protocol
Spec
External casing
Power supply connection
Bus power supply voltage (yellow cable)
Outlets power supply voltage (black cable)
PNP equivalent outlet
Maximum outlet current
Maximum outlets n.
Maximum n. outlets that can be actuated simult.
PNP 8 equivalent inlets
Maximum current each inlet
Inlet connections
Connection to net
Transmission speed
Maximum n. of node
Maximum bus length
Diagnosi bus
ASI DATA
Protection degree
24A8.37.10
AS-Interface
Version 2.1 Rev 1
Reinforced technopolymer
Cable piercing connector
+26,5 VDC…31,6 VDC
+24 VDC +/- 10%
+24VDC
300 mA
8
8
+24VDC+/-10%
20mA
Circolar connector M8 3 female poles
Cable piercing connector
167 Kbit/s
31 or 62 with extended system
100m
Green led - red - yellow
Code ID = 0H
Code IO = 7H
Profile S-7.0
IP65 (node and connector mounted)
Ambient temperature
from -0° to +50° C
Series 2400
Accessories
Outlet module 4 positions
Inlets module 4 positions
Ordering code
24A4.04.10 Module 4 OUT left
24A4.04.11 Module 4 OUT right
Outlet module 2 positions
Ordering code
24A4.14.10 Module 4 IN left
24A4.14.11 Module 4 IN right
Inlets module 2 positions
Ordering code
24A2.02.10 Module 2 OUT left
24A2.02.11 Module 2 OUT right
Module 2+2 positions
Ordering code
24A2.04.10 Module 2 OUT + 2 IN left
24A2.04.11 Module 2 OUT + 2 IN right
Plug (4 place module)
Ordering code : 2400.00
Ordering code
24A2.12.10 Module 2 IN left
24A2.12.11 Module 2 IN right
Closing plate
electrical positions
Ordering code
2400.15.00
VDMA support plate
Ordering code : 2440.50
Plug - inlet M8
Ordering code
5300.T08
FLAT support plate
Ordering code : 2430.50
Cable
Ordering code
24A0 . _ . _
CABLE COLOUR
01 = yellow cable
02 = black cable
CABLE LENGH
05 = 5 m.
10 = 10 m.
20 = 20 m.
27
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising