TBV IP - Triax
TBV IP
3.0MP Varifocal IR Bullet Network Camera
Model
Item no.
TBV IP
301041
Version
EN
triax.com
WARNING
To prevent fire or shock hazard do not expose the
insides of the unit to rain or moisture.
This symbol alerts the user to the presence of
important operating and maintenance issues
according to the manual.
This symbol alerts the user to the presence of
uninsulated dangerous voltage within the product
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
WARNING
This equipment has been tested and found to comply with the limits for a Class A digital device.These
limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates,uses,and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
CAUTION
Any changes or modifications in construction of this device which are not expressly approved by the
party responsible for compliance could void the users’ authority to operate the equipment.
Precautions
Use the appropriate power supply
The input power of the camera is 12V DC. Be
sure to connect the appropriate power. Incorrect
connection may cause malfunction and/or damage
to the video camera.
Do not attempt to disassemble the
camera
Do not use strong abrasive detergents
when cleaning the camera body
Use a dry cloth to clean the camera. If dirt is
difficult to remove use a mild detergent and wipe
gently.
Do not aim the camera at the sun
To prevent electric shock, do not remove screws
or covers. There are no user serviceable parts
inside. Maintenance should be performed by a
suitably qualified person only.
Do not attempt to aim the camera at the sun or
other extremely bright objects that cause a smear
to appear whether the camera is operating or
not. This can damage the CCD (Charge Coupled
Device)
Handle the camera with care
Do not operate near interference
Do not abuse the camera. Avoid striking, shaking
etc. The camera could be damaged by improper
handling or storage.
When installed near equipment like wireless
devices that emit strong electromagnetic fields
some irregularities such as noise on monitor
screen may occur.
TBV IP
3.0MP IR Varifocal Bullet Camera
Part No. 301041
•
•
•
•
•
•
•
•
•
3.0MP (2048 x 1536) High Resolution
Full HD 1080p Real-Time Video
2.8 - 12mm Lens
IP66 Weather Proof
DWDR & 3D DNR & BLC
42 IR LED’s 30m (100ft)
Onboard Storage (up to 32GB)
Vandal Proof
Audio I/O, Alarm I/O
COLOUR
1/3” CMOS
IR LED
DAY & NIGHT
AUTO WHITE
BALANCE
BACK LIGHT
COMPENSATION
IP66
WEATHERPROOF
HD VIDEO
MICRO SD
CARD SLOT
DUAL STREAM
POWER OVER
ETHERNET
VARIFOCAL
CAMERA
RESOLUTION
PROGRESSIVE
SCAN
I/O ALARM
DIGITAL NOISE
REDUCTION
H.264 CODEC
WIDE DYNAMIC
RANGE
1. Sun Shield
SunCover
Shield
2. 1.Front
Frontand
Cover
3. 2.Zoom
Focus Lever
4. 3.IRZoom
LED and Focus Lever
IR LED
5. 4.Lens
6. 5.AirLens
Vent
Air Vent
7. 6.Video
Output Interface
Video Output
Interface
8. 7.Integrated
Bracket
Integrated
9. 8.Reset
ButtonBracket
10.9.SDReset
CardButton
Slot
SD Card
Slot
11.10.
Power
Interface
Power Interface
Interface
12.11.
Network
12. Network Interface
Note:
1. To reset the default parameters to the
camera, please press and hold the
reset button and power on the camera.
You must press and hold the reset
button for approx 10 seconds.
2. The TBV IP Camera supports audio
and alarm functions. The interfaces are
shown as follows.
Installation
Note:
Please make sure that the wall is strong
enough to withstand three times the
weight of the camera.
Steps:
1.
SD Card Installation
1.
Rotate the sunscreen M3X5 screw anticlockwise to loosen it. Slide the sun
shield according to the arrow direction
as shown in fig.1
Remove the sun shield as shown in
fig.2
Remove the front cover by rotating it
anti-clockwise.
Insert the SD card to the SD card slot
(fig.3).
Re-attach the front cover to the camera
and the sun shield as shown in fig.4
Slide the sun shield as shown in fig.5
Rotate the sunshield screw clockwise
to tighten the sun shield. (fig.6)
2.
3.
4.
5.
6.
7.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
2.
Drill the Holes
1.
Attach the drill template (supplied) to
the wall where the camera is to be
mounted.
Drill screw holes in the wall according
to the drill template.
If you need to route cables through the
wall (or ceiling), cut a cable hole
according to the drill template.
Route the cables of the camera.
Secure the camera to the wall (or
ceiling) with expansion screws. (fig.7)
2.
3
4
5
3.
Fig. 6
Viewing Angle Adjustment
Pan Adjustment (See fig.8)
Loosen lock screw-1.Adjust the panning
position of the camera. The adjusting range
is from 0 to 360 degrees.Tighten the lock
screw-1.
Fig. 7
Tilt Adjustment (See fig.8)
Loosen lock screw-2. Adjust the tilting
position of the camera. The adjusting range
is from 0 to 90 degrees.Tighten the lock
screw-2.
Rotation Adjustment (See fig.8)
Loosen lock screw-3.Rotate the rotation
position to adjust the azimuth angle of the
image. The adjusting range is from 0 to 360
degrees.Tighten lock screw-3.
For detailed instructions please visit
www.triax.co.uk
Fig. 8
Specifications
Camera
Image Sensor
1/3” Sensor
Shutter Speed
1/25s ~ 1/100,000s
Min. Illumination
Lens
Auto Iris
Day & Night
Dig. Noise Reduction
0.07 Lux@F1.2 (AGC On) 0 Lux with IR
2.8 - 12mm@F1.4, Angle of View 98°~30.5°
DC Drive
ICR
3D DNR
Wide Dynamic Range Digital WDR
Backlight Comp.
Yes, Zone configurable
Video Compression
H.264 / MJPEG
Compression Standard
H.264 Compression
Profile
Main Profile
Bit Rate
32 Kbps ~ 16 Mbps
Audio Bit Rate
64Kbps (G.711) / 16Kbps (G.726)
Audio Compression
Image
Max. Image Res
Frame Rate
Image Settings
Network
G.711 / G.726
2048 x 1536
60Hz: 15fps (2048 x 1536), 30fps (1920 ×
1080), 30fps (1280 x 720)
50Hz: 12.5fps (2048 x 1536), 25fps (1920 ×
1080), 25fps (1280 x 720)
Saturation, brightness, contrast adjustable
through client software or web browser
Network Storage
NAS (iSCSI Optional)
Protocols
TCP/IP, HTTP, DHCP, DNS, DDNS, RTP,
RTSP, PPPoE, SMTP, NTP, SNMP, HTTPS,
FTP, 802.1x, Qos, UPnP (SIP, SRTP, IPv6
optional)
Alarm Trigger
System Capability
General
Functionalities
Motion detection, tampering alarm
ONVIF, PSIA, CGI
Dual Stream, User Authentication, Watermark
Interface
Communication
Interface
1 RJ45 10M / 100M Ethernet Port
On-Board Storage
Built in Micro SD Card SLot, upto 32GB
Working Temperature
/ Humidity
-30°C ~ 60°C / -22°F ~ 140°F
Humidity 95% or less (non-condensing)
General
Power Supply
Power Consumption
IR Distance
Weather Proof Rating
Dimensions
Weight
DC 12V ±10%, PoE (802.3af)
(Not Supplied)
Max. 5.5W (7.5W with ICR On)
30m (100ft)
IP66
ɸ105 x 295.6mm (4.13 x 11.64”)
1200g (2.65lb)
For detailed instructions please visit: www.triax.co.uk
Triax reserves the right to change the specifications without prior notification.
Triax accepts no liability in respect of loss arising from errors
in changes to the information provided.
triax.com/support
Copyright © 2016 TRIAX. All rights reserved. The TRIAX Logo and TRIAX, TRIAX Multimedia
are registered trademarks or trademarks of the TRIAX Company or its affiliates.
All specifications in this guide are subject to change without further notice.
TRIAX A/S | Bjørnkærvej 3 | DK-8783 Hornsyld | Denmark
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising