thc1516 weekly programmable timer
THC1516 WEEKLY PROGRAMMABLE TIMER
E Technical Data
e Operation Voltage: 220 -240 М АС e Power Reserve: 60 Days
e Frequency: 50/60Hz e Battery Life: 3 years (Lithium Battery)
e AC switching capacity: 16A/250V AC Minimum Interval: 1 Minute
e Inductive Load: ВА se No. of Memory: 17 ON +17 OFF
e Ambient Temperature: -10 °C “+20 e Max. Terminal Capacity:-6mm*
e Accuracy: *1s/day at +20°C e DIN Rail Mounting
Ш Operation Instruction
Programming Setting
Seda Na: Programmine
1 Press P once Setting Channel (17 ON / OFF settings)
2 Press D+ Select days of week (if you want same set in every day, need not press this key)
3 Press H+ . Setting Hours
4 Press M+ Setting Minutes
5 Press (D Setting Normal Display time
6 Press Manual Setting Permanent ON Permanent OFF Auto(AUTO),Please see diagram 1
7 Press Reset Reset Timer (delete programming errors)
Ш Setting Instructions:
Step 1. Restore Factory Setting
Press button <Reset> on timer before setting the program you require.(refer diagram 1)
Step 2. Setting Current Time an Timer
Press and hold button <(T> on timer to set day by pressing D+(day), H+[hour), M+(minute) (refer diagram 2)
step 3. Programme Setting
Press the button <P> on timer once follow by pressing D+{day), H+{hour),M+{Minute) to set the desired working programm
and repeat the same step (for ON/OFF and multiple programming )-{ refer diagram 3 )
Example:
3.1) preSs button <P> once =ON programming. Setting of Day/Hour/Minutes press D+ H+ M+
3.2) press button <P> once again =OFF programming. Setting of Day/Hour/Minutes press D+,H+ M+
e Setting D+, there are 15 kinds of different combination for week setting. such as:
MO/TU/WE/TH/FR/SA/SU (each setting for each single day)
MO TU WE TH FR SA SU (from Monday to Sunday)
MO TU WE TH FR SA
MO TU WE TH FR
SA SU
MO WE FR
TU TH SA
MO TU WE
TU FR SA Е
e Setting H+, From 1 to 23 for hours setting
1,2,3,4......23 Hours
e Setting M+, From 1 to 59 for Minutes setting
01, 02, 03, 04......59 Minutes
3.3) repeat above for program setting 2.....17
Step 4. Exit to Clock
To exit to normal display time press < (9) > once
Ш Diagram:
Diagram 3
Diagram 2
slo:
Dia:
я,
Diagram 4
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement