utility power strip
UTILITY POWER STRIP
MODEL UP15-10
OPERATION
The on/off switch controls power to the outlets on the power strip.
The on/off switch is also a 15 Amp breaker, if an overload occurs,
the power strip will automatically switch off. To resume operation,
reduce the number of devices plugged into the power strip and
turn the on/off switch to RESET.
INSTALLATION
1
Position the hooks on the mounting bracket on the utility
track.
2
Press the mounting bracket bar until it snaps into the utility
track.
3
Plug power strip into a properly grounded outlet.
utility track
To reduce the risk of electric shock:
• Use ONLY in dry locations and ONLY indoors.
• DO NOT plug into another relocatable power tap.
• DO NOT “daisy chain” surge protectors.
• DO NOT use with ANY aquarium equipment.
• DO NOT use if properly grounded outlets are not available.
• DO NOT install this device if there is not at least 10 meters
(30 feet) or more of wire between the electrical outlet and
electrical service panel.
hooks
on/off switch
mounting bracket bar
114A4609
© 2013, The Chamberlain Group, Inc.
All Rights Reserved
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement