XPGO_10a_Spec Sheet_V1.2

XPGO_10a_Spec Sheet_V1.2
XProtect™ Go 1.0
Specification Sheet
Contents
Feature Overview ................................................................................................................ 3
Integration Options ....................................................................................................................................... 3
Key Features .................................................................................................................................................. 3
Administration Features ................................................................................................................................ 3
Detailed Product Features ................................................................................................... 4
XProtect Go Server Module ........................................................................................................................... 4
XProtect Go Smart Client ............................................................................................................................... 5
Minimum System Requirements .......................................................................................... 6
XProtect Go Server ........................................................................................................................................ 6
Additional XProtect Go Clients ...................................................................................................................... 6
Miscellaneous ...................................................................................................................... 7
Supported Languages .................................................................................................................................... 7
Licensing Structure ........................................................................................................................................ 7
2
Feature Overview
Key Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Single-server video surveillance solution:
Supports up to 8, IP cameras, USB cameras or analog
cameras.
Single user system:
Supports one concurrent user.
Optimized Recording Storage Management:
Unique data storage and archiving solution that
combines superior performance and up to 5 day low
cost video storage.
Wide IP camera and device support:
Supports currently connection of almost 900 IP cameras
and IP video encoders from over 80 different vendors
through dedicated device integration.
ONVIF™ and PSIA compliant:
Supports ONVIF™ and PSIA compliant cameras and
devices.
Wide compression technology support:
Supports the new compression methods; MPEG4 ASP,
MxPEG and H.264, besides MJPEG and MPEG4.
System configuration wizards:
Guides the user through the process of adding cameras,
configuring video and recording, adjustment of motion
detection and user configuration.
Sequence Explorer:
Displaying sequences and time intervals in thumbnail
pre-views, the Sequence Explorer gives unparalleled
visual overview of recorded video combined with smooth
navigation.
Overlay buttons
Intuitive control of cameras, camera-integrated devices
and other integrated systems- directly from the camera
view.
Independent Playback
Instant and independent playback function allows you to
independently playback recorded video for one or more
cameras, while in live viewing or playback mode.
Built-in Video Motion Detection:
Independent of camera model, XProtect™ Go supports
up to 8 cameras simultaneously.
Multiple language support:
Let the operator use the system in their native language
with support for 7 different languages.
Fast evidence export:
Recorded video can only be exported in AVI format, with
a Milestone logo watermark.
Single step software installation
Simplified installation process downloads the software
over the internet and all server and client modules on
one single PC.
Interactive information screens
Interactive information screens provide users with
important product information at system logon.
Administration Features
•
•
•
•
•
•
•
•
Single Management Application: A new Management
Application provides a consolidated single point
management access to XProtect GO Recording Server.
System configuration wizards: Guides the user
through the process of adding cameras, configuring
video and recording, adjustment of motion detection and
user configuration.
Automated device discovery: Enables fast discovery
of camera devices using methods such as Universal
Plug And Play, Broadcast and IP Range scanning.
Smart bulk configuration option: Change settings
across multiple devices simultaneously and in a very few
clicks.
Adaptable application behavior: Guides novice users,
while expert users can optimize the application for
efficient use.
Export/import of system and user configuration
data: System backup for reliable system operation and
fast system recovery. System cloning for efficient rollout
of multiple systems with the same, or similar,
configuration.
Import of off-line configuration data: Enabling off-line
editing of configuration data, including camera and
device definitions.
Automatic system restore points: A 'Restore Point' is
created each time a configuration change is confirmed.
Enables easy rollback to previously defined system
configuration points and enables cancelation of
undesired configuration changes and restoration of
earlier valid configurations.
Integration Options
•
•
Integrate with access control systems, alarms, gates,
building management systems, etc. using hardware I/O,
internal events and TCP/IP events.
Create, import and use HTML pages for navigation
between views.
3
Detailed Product Features
XProtect Go Server Module
Recording Server
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Simultaneous digital multi-channel video and audio
recording and live viewing (relaying).
Bandwidth optimized multi-streaming by splitting a single
camera video stream to differentiated streams for live
view and recording, where each can be optimized
independently with respect to frame rate and resolution.
Connectivity to cameras and video encoders supports
MJPEG, MPEG4, MPEG4 ASP, H.264 and MxPEG.
Auto-detect camera models during setup.
Flexible multi-site, multi-server license structure charged
per camera.
Unlimited number of installed cameras; simultaneous
recording and live view of up to 8 cameras.
Recording technology: secure high speed database
holding JPEG images or MPEG4 and MxPEG streams
including audio.
Recording speed: 30+ frames per second per camera,
limited only by hardware.
Recording quality depends entirely on camera and video
encoder capabilities: no software limitation.
Start cameras on live view requests from clients.
Unlimited recording capacity with multiple archives
possible per day.
Hourly to daily database archiving to additional local
storage – with images still available transparently for
playback, for up to 5 days.
Built-in, real-time, camera independent motion detection
(VMD); fully adjustable sensitivity, zone exclusions,
recording activation with frame rate speed up, and alert
activation through email.
Start recording on event.
Client initiated start of recording based on pre-defined
recording time and access privileges.
Pan Tilt Zoom (PTZ) preset positions, up to 25 per
camera.
Absolute and relative PTZ positioning.
PTZ go-to preset position on events.
Flexible e-mail notification triggered by time or event.
Recording Server Manager
•
•
•
•
•
Local console management of the Recording Server
accessible from the notification area.
Start and stop Recording Server service.
Access to Recording Server configuration settings.
Access to Recording Server help system.
View system status and log information.
Image Server
•
•
•
•
•
•
Remote access for SmartClient.
Built-in web server for download and launch of clients
and plug-ins.
Authenticate access based on local Windows user
account, or XProtect user name and password.
User profile control access to: Live view, PTZ, PTZ
presets, Output control, Events, Listen to microphone,
Manual recording; Playback, AVI export, Sequences,
and audio.
Audit logs of exported evidence.
Audit logs of client activity by time, locations and
cameras.
4
XProtect Go Smart Client
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
View live video or playback recordings for 1-8 cameras
simultaneously.
Advanced video navigation including fast/slow playback,
jump to date/time, single step and video motion search.
Views can be defined in various layouts: view or
playback camera images simultaneously in the same
view.
Import static or active HTML maps for fast navigation to
cameras and good premise overviews.
Control output port relay operation, for example control
of gates.
Quick overview of events/alerts.
Installed per default on Recording Server for local
viewing and playback of video and audio.
Start recording on cameras for a pre-defined time
(default 5 minutes).
Independent Playback capability allows for instant
playback of recorded video for one or more cameras,
while in live and playback mode.
Live view digital zoom allows zoomed-out recordings
while the operator digitally can zoom in to see details.
’Update On Motion Only’ optimizes CPU usage by letting
motion detection control whether the image should be
decoded and displayed or not. The visual effect is a still
image in the view until motion is detected.
Camera views offer 1x1 up to 10x10 layouts in addition
to asymmetric views.
Views optimized for both 4:3 and 16:9 screen ratios.
Hotspot function for working in details with a camera
selected from a view containing multiple cameras.
Carousel function allows a specified view to rotate
between pre-defined cameras with individual timing and
order with multiple appearances. Carousel function can
be controlled allowing the operator to pause carousel
function and to switch to previous or next camera.
Overlay buttons provides intuitive control of cameras,
camera-integrated devices and other integrated
systems- directly from the camera view.
Cameras’ built-in audio sources available in live and in
playback.
Separate pop-up window displaying sequences and time
intervals in thumbnail pre-views, the Sequence Explorer
gives unparalleled visual overview of recorded video
combined with smooth navigation.
Presents recorded sequences for individual cameras, or
all cameras in a view.
Seamlessly available in both Live and Playback modes.
Smooth navigation with sliding preview and “drag-andthrow” function for video thumbnails.
Instant playback of video sequences.
Application Options allows user to adapt the layout and
personalize the application to their particular
preferences.
Control PTZ cameras remotely, also using preset
positions.
•
•
•
•
Remote PTZ Point-and-Click control.
Remote PTZ zoom to a marked rectangle.
Grandeye/IPIX 1x2 or 2x2 ‘Quad View’ for viewing all
360° at once.
Export video material in AVI format, with Milestone
watermark.
5
Minimum System Requirements
XProtect Go Server
Additional XProtect Go Clients
XProtect Go Recording Server 1.0 and
XProtect Smart Client 5.0
XProtect Smart Client 5.0
•
•
•
•
HW Platform:
Minimum 2.4 GHz CPU and 1 GB RAM (2.4 GHz dual
core processor and 2 GB RAM or more recommended).
Minimum 1 GB disk space available, excluding space
needed for recordings.
Graphics Card:
AGP or PCI-Express, minimum 1024 x 768 (1280 x 1024
recommended), 16 bit colors.
OS:
®
®
Microsoft Windows XP Professional (32 bit or 64 bit*),
Windows Server 2003 (32 bit or 64 bit*), Windows Server
2008 R1/R2 (32 bit or 64 bit*), Windows Vista™ Business
(32 bit or 64 bit*), Windows Vista Enterprise (32 bit or 64
bit*), Windows Vista Ultimate (32 bit or 64 bit*), Windows
7 Professional (32 bit or 64 bit*), Windows 7 Enterprise
(32 bit or 64 bit*), Windows 7 Ultimate (32 bit or 64 bit*)
and Windows 7 Home Premium (32 bit or 64 bit*).
Software:
DirectX 9.0 or newer required.
Microsoft .NET 3.5 Framework SP1, or newer service
pack.
•
•
•
•
*)
HW Platform:
Minimum 2.4 GHz CPU, 1 GB RAM
Graphics Card:
AGP or PCI-Express, minimum 1024 x 768 (1280 x 1024
recommended), 16 bit colors.
OS:
Microsoft Windows XP Professional (32 bit or 64 bit*),
Windows Server 2003 (32 bit or 64 bit*), Windows Server
2008 R1/R2 (32 bit or 64 bit*), Windows Vista Business
(32 bit or 64 bit*), Windows Vista Enterprise (32 bit or 64
bit*), Windows Vista Ultimate (32 bit or 64 bit*), Windows
7 Professional (32 bit or 64 bit*), Windows 7 Enterprise
(32 bit or 64 bit*), Windows 7 Ultimate (32 bit or 64 bit*)
and Windows 7 Home Premium (32 bit or 64 bit*).
Software:
DirectX 9.0 or newer required.
Microsoft .NET 3.5 Framework SP1, or newer service
pack.
Running as a 32 bit service/application.
6
Miscellaneous
Supported Languages
Licensing Structure
XProtect Go Management Application 1.0
Base Server License
•
•
English, Danish, French, German, Italian, Japanese,
Simplified Chinese, and Spanish.
XProtect Smart Client 5.0
The following language modules are available as a part of
XProtect Go Internet Download Manager:
• English, German, French, Spanish, Italian, Danish,
Simplified Chinese, and Japanese.
•
•
•
XProtect Go is completely free and only requires
registration to operate beyond 30 days.
Annual re-registration required for continues use.
The XProtect Go free server license allows for up to 8
devices to be added.
The free server license contains the XProtect Go server
modules: Recording Server, Recording Server Manager,
Image Server, plus the client modules: Smart Client.
Client - Unlicensed
Additional language version available:
• Arabic, Czech, Dutch, Finnish, Hungarian, Korean,
Traditional Chinese, Polish, Russian, Slovak, Swedish
and Turkish.
•
The Smart Client is not licensed and can be installed and
used on any number of computers.
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement