Smartpack Controller

Monitoring and Control Unit

Powerful and cost effective control module

The Smartpack controller is a monitoring and control unit used as the vital nerve center of the DC power plant. You operate the system from the elegant front panel, using three front keys and the LCD-display. They represent the main interface between you and the system.

SMARTPACK CONTROLLER

MONITORING AND CONTROL UNIT

242100.100.DS3- rev10

APPLICATIONS

CAN bus communication

Smartpack utilizes a digital interface architecture (CAN bus communication). It allows the unit to support dedicated communication channel with each rectifier, providing for increased number of functions and greater flexibility.

Modular design

The Smartpack is extremely flexible in its expandability. Additional units connected to the CAN bus can be added to provide extended functionality and increased number of measuring points.

Accordingly, system components can be set up and upgraded to meet the demand of any tailor-made power solution.

PRODUCT DESCRIPTION

The Smartpack controller is a powerful and cost-effective module, developed for monitoring and controlling a wide range of Eltek’s DC power supply systems, such as Powerpack, Flatpack2 and Minipack DC power systems.

You can also operate the system locally via a PC using the PowerSuite PC application, or remotely via modem,

Ethernet and the Web. The module then utilizes the USB- or RS-232 ports to interface with a local PC, SNMP or Web adapters.

The Smartpack controllers are CE, UL and NEBS tested as part of systems approvals.

Eltek — Gråterudveien 8, PB 2340 Strømsø, 3003 Drammen, Norway

KEY FEATURES

• FRONT PANEL LCD AND BUTTONS

For on-site service without PC. (Not on Basic

Slave model)

• USB- OR RS-232 INTERFACE

For PC connection locally or remote monitoring and control via modem, Ethernet, web or

SNMP.

• INPUT/OUTPUT MONITORING

-6/2 user programmable relay outputs for traditional remote monitoring

-6/2 user programmable inputs for monitoring of other equipment on site

• BATTERY FEATURES o

Battery monitoring and testing without site attendance o

Temperature compensated charging for increased battery lifetime o

Battery lifetime indication

• SECURITY

Password protected operator access levels

• ALARM/EVENT log with time and date

• SOFTWARE

Windows-based PC communication

Phone: +47 32 20 32 00 Eltek © 2015 – www.eltek.com

SMARTPACK CONTROLLER

(RECTIFIER MODULE)

REMOTE MONITORING AND CONTROL

From a PC running Powersuite

From a PC running web-browser

From an NMS via Ethernet (SNMP)

Using alarm relay (voltage free contacts)

A Windows-based communication program installed on a remote computer, the system can be monitored and controlled via modem or

Ethernet network

The system can be monitored and controlled via Ethernet network

With an SNMP agent connected to the Smartpack, the system can be monitored and controlled from a Network Management System (NMS) through Ethernet on Simple Network Management Protocol (SNMP)

6/2 internal failsafe alarm relays provide voltage free contacts that can be connected to equipment used for traditional alarm monitoring

LOCAL MONITORING AND CONTROL

From a PC running PowerSuite

LCD and three keypads for local operations

A Windows-based communication software, can also communicate with the Smartpack through an USB serial or RS-232 cable

If any alarm (major or minor) is activated, a (red or yellow) LED is lit in the front panel, the alarm text appears in the LCD and the corresponding alarm relay is activated

In normal operation, the front LCD will display the output voltage, battery current, load current and charge mode. (Not on Basic Slave version)

AVAILABLE ALARMS FEATURES

System

Output Voltage Measurement

Total Load Current Measurement

Load/Battery Disconnect

Alarm Level Settings (major / minor)

Alarm Log (up to 1000 events, 10k on HW v2)

Real Time Clock with Battery Backup

Site Text/ID

Test of Relay Outputs

Voltage Level setup

Data logging (up to 7000 data points)

Energy logging (hourly, daily and weekly)

Battery

Battery Current Measurement

Battery Temperature Measurement (optional)

Battery Testing (acc. to discharge table or set time limit)

Battery Test Information (10 latest tests)

Setup of Battery Data

Battery shunt setup

Battery quality indication

Battery Boost Charging

Battery Cable Voltage Drop Compensation

Temperature Compensated Charging

Protection against Temperature Probe Failure

Rectifier

Available information about each rectifier, e.g. serial number, version, internal temperature

Individual Rectifier Current Measurement

Individual Rectifier Input Voltage

Efficiency Management

Generator and solar charger support

Generator On/Off control signaling based on SOC monitoring for battery cycling applications, adjustable limits

Time based, daily and/or monthly on/off signaling

Prioritize power from solar charger when available

Suppress solar charger warning during full panel shading

Doc 242100.100.DS3– rev10

Mains Failure (individual phases)

Digital Inputs (programmable names)

Load Disconnect (voltage or timer)

Load Fuse

Load Current

High Battery voltage

Low Battery voltage

High Battery temperature

Low Battery temperature

Battery Capacity

Battery Disconnect

Battery Fuse

Symmetry Failure

Battery quality indication

Battery discharge current

Rectifier Failure

Critical Rectifier Failure (> 1, programmable)

Rectifier Capacity w. programmable level

Rectifier Current Limit

Rectifier Overvoltage Protection

Rectifier Current

Specifications are subject to change without notice

Eltek — Gråterudveien 8, PB 2340 Strømsø, 3003 Drammen, Norway Phone: +47 32 20 32 00 Eltek © 2015 – www.eltek.com

SMARTPACK CONTROLLER

(RECTIFIER MODULE)

SPECIFICATIONS

Input Voltage

Power consumptions

Dimensions (WxHxD)

18-75VDC, covering 24, 48 and 60 nominal systems voltages.

4.5W max (stand alone – no CAN control nodes powered)

109 x 44 (1U) x 140mm 4.3 x 1.7 x 5.5”

OPTIONAL CONTROL DEVICES/CAN NODES

Part No.

242100.300

242100.301

242100.304

242100.200

PART NUMBERS

Part No.

242100.110

242100.111

242100.118

242100.000

Doc 242100.100.DS3– rev10

Description

Battery Monitor

Load Monitor

I/O Monitor (Outdoor)

Smartnode RS232/485

Description

Smartpack Extended (6 + 6 I/O, 2 String Battery connection)

Smartpack RS-232 front (RS-232, 6 + 6 I/O, 2 String Battery connection)

Smartpack WEB/SNMP (Ethernet, 6 + 6 I/O, 1 String Battery connection)

Smartpack Basic Slave (without display, buttons & internal power for distributed systems)

Specifications are subject to change without notice

Eltek — Gråterudveien 8, PB 2340 Strømsø, 3003 Drammen, Norway Phone: +47 32 20 32 00 Eltek © 2015 – www.eltek.com

SMARTPACK CONTROLLER

(RECTIFIER MODULE)

Eltek — Gråterudveien 8, PB 2340 Strømsø, 3003 Drammen, Norway Phone: +47 32 20 32 00 Eltek © 2015 – www.eltek.com