null  null
IFM6S30
CHRONOGRAPH
CALENDAR
MANUAL DE INSTRUCCIONES • INSTRUCTION MANUAL • MANUEL D’INSTRUCTIONS
BETRIEBSANLEITUNG • MANUALE DI FUNZIONAMENTO
INSTRUCTION MANUAL
CHRONOGRAPH
Displays And Buttons
14
Setting The Time
16
Setting The Date
16
Using The Chronograph
17
Chronograph Reset (Inc. After Replacing Battery)
18
13
English
IFM6S30
6S30
Chronograph
second hand
2nd Click
Position
1st Click Position
Normal Position
Normal
second hand
D I S P LA YS A N D B U TTO N S
6S10
Minute hand
Button A
Chronograph
1/20 second hand
Chronograph
minute hand
IFM6S30
6S20
Chronograph
1/20 second hand
Chronograph
minute hand
Normal
second hand
Button B
Calendar
14
15
English
IFM6S30
DI S P LA YS A ND BUTTONS
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.
IFM6S30
U S I N G TH E C H RO N O G RA P H
This chronograph is able to measure and display time in 1/20 second united
up to maximum of 59min, 59sec. The chronograph 1/20 second hand keeps
continuously for 30 seconds after starting, and then stops at Zero position.
[Measuring time with the stopwatch]
1. Press button “ A “ to start the chronograph.
S E T TIN G T H E DATE
1. Pull the crown out to the 1st Click Position.
2. Turn the crown clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the following day.
3. After the date has been set, push the crown back to the Normal position.
16
2. The chronograph can be started and stopped each time button “A” is
pressed.
3. Press button “B” to reset the chronograph and chronograph minute and
second hands return to their Zero positions.
Reset
Time
measurement
17
Stop
English
IFM6S30
S E T TIN G T H E TIME
CHRONOGRAPH RESET (incl. after replacing battery)
IFM6S30
English
This procedure shoud be performed when the chronograph second hand does not
return to the Zero position.
1. Pull the crown out to the 2nd Click Position.
2. Press the button “A” once to set the chronograph second hand to the Zero
position.
3. Press the button “B” once to set the chronograph 1/20 second hand to the Zero
position.
* The chronograph hands can be advanced rapidly by continuously pressing button
“A” or “B”.
4. Once the hands are set at Zero position, reset the time and return the crown to
its normal position.
18
By virtue of the regulations pursuant to the handling of waste
products deriving from electronic and electrical equipment, end of
lifecycle watch making products must be selectively collected for
processing. You may therefore dispose of your quartz watch making products at
any of our retail outlets or any other authorized collection point. The selective
collection, processing, rating and recycling of these products helps contribute to
safeguarding the environment and protecting our health. 19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement