QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Overview
HP ProLiant BL460c G7 Server Blade
1. Two (2) mezzanine I/O expansion slots
5. Two (2) small form factor (SFF) hot-plug drive bays
2. Internal USB connector
6. Local I/O Connector
3. Twelve (12) DDR3 Registered or Unbuffered DIMM
7. Internal SD card slot
Memory Slots
8. Up to two (2) Intel® Xeon® 5500 or 5600 series
processors
4. HP Smart Array P410i Controller (under drive bays)
9. Access Panel
At A Glance
This document covers the HP ProLiant BL460c G7 server blade only. For more information on HP BladeSystems c-Class
Infrastructure and HP BladeSystem c-Class Interconnect Components, please see the following QuickSpecs:
HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
HP BladeSystem c-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html
The HP ProLiant BL460c G7 provides greater 2P x86 server blade density without compromise and maximum powerefficiency with flexibility and choice.
HP ProLiant BL460c G7 server blade includes:
Processor:
Up to two (2) Intel® Xeon® 5500 or 5600 Series processors
Intel® 5520 Chipset
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 1
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Overview
Memory:
Twelve (12) DIMM slots
Up to 192GB, using PC3-8500 DDR3 Registered (RDIMM) memory, operating at 800MHz when fully populated
at 2 DIMMs per Channel in 12 slots
Up to 48GB, using PC3-10600 DDR3 Unbuffered (UDIMM) memory, operating at 1333MHz when fully populated
at 2 DIMMs per Channel in 12 slots
Storage Controller:
HP Smart Array P410i Controller (RAID 0/1)
Internal Drive Support:
Up to two (2) small form factor (SFF) SAS or SATA hot plug hard disk drives or SATA solid state drives
Network Controller:
Integrated NC553i Dual Port FlexFabric 10Gb Converged Network Adapter supporting stateless TCP/IP offload,
TCP Offload Engine (TOE), Fibre Channel over Ethernet (FCoE) and iSCSI protocols
NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric
10Gb/24-port Module. Learn more at: www.hp.com/go/virtualconnect.
NOTE: Each port is autosensing 1 Gb / 10 Gb, and can interoperate with 1 Gb HP BladeSystem c-Class
interconnect components. Both ports will operate at the same speed.
One (1) additional 10/100 server adapter dedicated to iLO 3 Management
Mezzanine Support:
Two (2) I/O expansion mezzanine slots
Supports up to two (2) mezzanine cards
Dual-Port Fibre Channel Mezzanine (4-Gb or 8-Gb) options for SAN connectivity
Ethernet server adapter mezzanine options for additional network ports
InfiniBand (IB) Mezzanine options for low latency and high bandwidth server interconnectivity
I/O Accelerator mezzanine options for high transaction rate local storage
Ports:
One (1) internal USB 2.0 connector for security key devices and USB drive keys
One (1) internal SD-HC Card slot
Security - Trusted Platform Module:
One (1) internal TPM 1.2 module connector
Form Factor:
HP ProLiant BL460c G7 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000
enclosures
Infrastructure Management:
HP Integrated Lights-Out 3 (iLO 3) management processor for simplified server setup, health monitoring and
recovery, power and thermal control, and lights-out remote administration.
HP Insight Control, a product option, delivers essential infrastructure management that can help save time and
money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a
single, simple management console. Insight Control supports both Windows and Linux-based central
management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff
personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the
cost of common data center tasks by as much as 40 percent. This ultimately enables them to dynamically keep
pace with the organization's changing business requirements.
Operating Systems and Virtualization Software:
Supports Windows, RHEL, SLES, OEL, VMware ESX, and Citrix XenServer
Enclosures:
HP offers three different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiant BL460c G7
servers plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HP ProLiant BL460c G7
servers plugged horizontally.
The HP BladeSystem c3000 tower enclosure is designed with casters for sites without racks and holds up
to eight (8) HP ProLiant BL460c G7 servers plugged vertically.
Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard
Administrator modules are all designed to fit into the c3000 and c7000 enclosures.
For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 2
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Overview
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of
HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date
of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Enhancements to warranty services are available through HP Care Pack services or customized service
agreements. Certain restrictions and exclusions apply. Hard drives have either a one year or three year
warranty; refer to specific hard drive QuickSpecs for details.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairs may be
accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1)
Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers
decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but
may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge.
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 3
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Standard Features
Processor
Six Core Processors
Intel® Xeon® Processor X5670 (2.93 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo
2/2/2/2/3/3)
Intel® Xeon® Processor X5660 (2.80 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo
2/2/2/2/3/3)
Intel® Xeon® Processor X5650 (2.66 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo
2/2/2/2/3/3)
Intel® Xeon® Processor L5640 (2.26 GHz, 12MB L3 Cache, 60W, DDR3-1333, HT, Turbo
2/2/3/3/4/4)
Four Core Processors
Intel® Xeon® Processor X5667 (3.06 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo
1/1/2/2)
Intel® Xeon® Processor L5630 (2.13 GHz, 12MB L3 Cache, 40W, DDR3-1066, HT, Turbo 1/1/2/2
Intel® Xeon® Processor E5640 (2.66 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT, Turbo
1/1/2/2)
Intel® Xeon® Processor E5630 (2.53 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT, Turbo
1/1/2/2)
Intel® Xeon® Processor E5620 (2.40 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT, Turbo
1/1/2/2)
Intel® Xeon® Processor E5506 (2.13 GHz, 4MB L3 Cache, 80W, DDR3-800)
Two Core Processors
Intel® Xeon® Processor E5503 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo
Boost Technology, with 4, 3, 2, and 1 cores active (on Four Core processors) or with 6, 5, 4, 3, 2,
and 1 cores active (on Six Core processors).
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 and 5600 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes
Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
Upgradeability
Upgradeable to two (2) processors
Cache Memory
4MB shared L3 cache
12MB shared L3 cache
Chipset
Intel® 5520 Chipset
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 4
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Standard Features
Memory
Type
DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
Standard
6 GB (3 x 2GB) RDIMM
Maximum(RDIMM)
192GB (12 x 16 GB) for Registered Memory configurations
Maximum (UDIMM)
48 GB (12 x 4 GB) for Unbuffered Memory configurations
NOTE: A minimum of 2GB of memory must be installed.
NOTE: Depending on the memory configuration and processor model the memory speed may run at
1333MHz, 1066MHz or 800MHz. Please see the Online Memory Configuration Tool for details:
www.hp.com/go/ddr3memory-configurator
DDR3 memory options part number decoder
Network Controller
Integrated NC553i Dual Port FlexFabric 10GbE Converged Network Adapter
NOTE: FlexFabric capability requires the use of an HP Virtual Connect Flex-Fabric module. Learn
more at: www.hp.com/go/virtualconnect.
One (1) additional 10/100 NIC dedicated to iLO 3 Management
I/O Expansion Slots
Two (2) I/O expansion mezzanine slots (x8 PCI Express)
Integrated
Manageability
HP Integrated Lights-Out 3 (iLO 3) management processor
Storage Controller
Type
HP Smart Array P410i Controller (RAID 0/1) with no cache
Available Options: 256MB cache, Battery-Backed Write Cache (BBWC) module for 256MB cache,
512MB cache with Battery Backed Write Cache (BBWC), 1G and 512MB Flash Backed Write
Cache (FBWC), and Smart Array Advanced Pack.
NOTE: Supports two (2) Small Form Factor (SFF) Hot Plug drive bays.
Maximum Internal
Storage
Hot Plug SAS
Hot Plug SATA
Hot Plug SATA SSD
Graphics
Integrated Matrox G200
1.0TB
1TB
240GB
2 x 500GB Serial SCSI
2 x 500GB Serial ATA
2 x 120GB Serial ATA SSD
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 5
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Standard Features
Graphics Resolution
Supported
Resolution Color Depths 1600 x 1200, 64K, 256, 16
1280 x 1024, 16.7M, 64k, 256, 16
1024 x 768, 16.7M, 64k, 256,16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
NOTE: Maximum resolution available via HP Integrated Lights-Out 3
(iLO 3) remote console is 1280 x 1024.
Fibre Channel Support Two (2) optional Fibre Channel HBAs are supported by the HP ProLiant BL460c G7. Both
mezzanine circuit boards connect directly to the server blade system board. These Fibre Channel
HBAs are available via option kits and must be ordered separately.
HBA mezzanine card option kits:
Emulex LPe1105-HP 4Gb FC HBA (403621-B21)
Based on the same field-proven ASIC, firmware, and driver technology as Emulex's
renowned LPe1150 HBA, the Emulex LPe1105-HP is fully driver compatible with all Emulex
HBAs
Emulex LPe 1205-HP 8Gb FC HBA (456972-B21)
Exceptional performance, enhanced security, and scalable management for virtual server
and enterprise-class applications
QLogic QMH2462 4Gb FC HBA (403619-B21)
Uses common drivers which means that customers can standardize on one QLogic driver
whether they are using the QMH2462 or other HBAs powered by QLogic
QLogic QMH2562 8Gb FC HBA (451871-B21)
Provides a first step into the 8Gb future, advanced, embedded support for virtualized
environments and reduced power consumption
Brocade 804 8Gb FC HBA for HP BladeSystem c-Class (590647-B21)
Application oriented Quality of Service (AQoS) providing the ability to configure, prioritize,
and optimize traffic flows from virtual machines and/or applications to the target port
Brocade, Emulex and QLogic Fibre Channel HBAs for HP BladeSystem c-Class feature:
Optimal performance utilizing PCI Express
4/2/1Gb/s auto negotiating speeds (4Gb HBAs)
8/4/2Gb/s auto negotiation speeds (8Gb HBAs)
Dual-ports for redundant path connections
Up to two FC HBAs per server blade providing redundant FC HBA support
Optimized for HP StorageWorks and supported by third party SAN vendors
Support for Microsoft® Windows® and Linux operating system environments
Compatible SAN
HP ProLiant BL460c G7 server blades are optimized for HP StorageWorks MSA, EVA and XP.
HP ProLiant BL460c G7 server blades are compatible with select 3rd party SANs (please see
blade storage page for more details: http://h18004.www1.hp.com/products/blades/components/cclass-sans.html
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 6
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Standard Features
HP Virtual Connect
HP Virtual Connect is an interconnect option for BladeSystem c-Class that simplifies server
connectivity to data and storage networks, and reduces costs. Unique HP Flex-10 and FlexFabric
technologies make maximum use of network bandwidths, provide dynamic tuning and enable
extreme flexibility to meet individual server and infrastructure requirements. HP Virtual Connect
Enterprise Manager (VCEM) provides a central console to administer network connections and
workloads for thousands of servers. For more information on Virtual Connect Ethernet, Fibre
Channel, Converged Network and management options see: www.hp.com/go/virtualconnect
HP Insight
HP Insight Foundation
management software
Managing the growing number of servers can be complex and
expensive for your organization. IT managers need to address changing
business needs with tools that meet the challenges of managing today's
complex Datacenters.
HP provides management solutions that are designed to simplify a
server's installation, configuration and maintenance throughout the
entire server lifecycle. This provides the customer with higher levels of
operational efficiency and highly reliable systems:
http://www.hp.com/go/foundation.
The foundation pack includes:
HP SmartStart
HP Management
HP ProLiant Firmware Maintenance
SmartStart version supported (minimum): SmartStart 8.50.
http://www.hp.com/servers/smartstart
HP Integrated Lights-Out HP Integrated Lights-Out (iLO) simplifies server setup, health
(iLO)
monitoring, power and thermal control, and lights-out remote
administration of ProLiant ML, DL, and BL servers. HP iLO functions
without additional software and can be accessed from any location via a
web browser. HP iLO works hand-in-hand with HP Systems Insight
Manager, Insight Control suites, and Insight Dynamics for ProLiant,
helping customers unleash the value of the ProLiant platform and
deliver the highest possible quality of IT service. For more information,
visit: www.hp.com/go/iLO
HP Insight Control
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, remote control, and optimize your IT
infrastructure through a single, simple management console.
Two versions of Insight Control are available, to serve environments
requiring either a Linux-based or a Windows-based central management
server: HP Insight Control for Linux, and HP Insight Control. See
www.hp.com/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff
and proactive delivery of software updates. For more information about
this service, please visit: http://www.hp.com/services/insight.
HP Insight Dynamics for HP Insight Dynamics for ProLiant, a product option, is advanced
ProLiant
infrastructure management software that enables IT staff to instantly
adjust their environments to meet dynamic business demands by
provisioning, optimizing and protecting complex infrastructure in
minutes. It's a powerful toolkit, integrated-by-design, that accelerates
complex technology projects and simplifies daily operations,
transforming data center economics. With Insight Dynamics IT
professionals can plan capacity and power continuously, balance
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 7
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Standard Features
workloads across physical and virtual resources, and ensure costeffective high availability. It also enables IT organizations to provision
infrastructure consistently and automatically from pools of shared
resources using a self-service portal. Resources provisioned can range
from a single virtual machine to complex multi-tier environments and
their associated physical and virtual resource requirements. In addition
to the previous functional benefits, it also provides a cost-effective
disaster recovery for physical and virtual environments that works with
HP StorageWorks Continuous Access software for both the Enterprise
Virtual Array and the XP storage array allowing application
environments to be reactivated in minutes with the touch of a button to a
remote location.
NOTE: For more information, visit:
http://www.hp.com/go/insightdynamics
High Performance
Clusters
HP Cluster Platforms
HP Cluster Platforms are specifically engineered, factory-integrated
large-scale ProLiant clusters optimized for High Performance
Computing, with a choice of servers, networks and software. Operating
system options include specially priced offerings for Red Hat Enterprise
Linux and Novell SLES, as well as Microsoft Windows HPC Server. A
Cluster Platform Configurator simplifies ordering.
http://www.hp.com/go/clusters
HP HPC Interconnects High Performance Computing (HPC) interconnect technologies are
available for this server as part of the HP Cluster Platform portfolio.
These high-speed InfiniBand and Gigabit interconnects are fully
supported by HP when integrated within an HP cluster. Flexible,
validated solutions can be defined with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Cluster Management HP Cluster Management Utility (CMU) is an HP-licensed and HPUtility
supported suite of tools that are used to manage large-scale Linux
ProLiant systems. CMU includes software for the centralized
provisioning, management and monitoring of nodes. CMU makes the
administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
HP HPC Linux Value
HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HPPack
supported specially priced software bundle for the development and
deployment of applications on HPC Cluster Platforms. Value Pack
includes the Platform LSF workload scheduler, the HP-MPI
parallelization library, the HP Unified Parallel C compiler and the HP
Shmem library, as well as the execution environments for the libraries
and compiler. HP HPC Linux Value Pack
Operating Systems and Microsoft Windows Server
Virtualization Software Red Hat Enterprise Linux (RHEL)
Support for ProLiant
SUSE Linux Enterprise Server (SLES)
Servers
Oracle Enterprise Linux (OEL)
VMware
Citrix XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit
our Support Matrix at: http://www.hp.com/go/ossupport and our driver download page
http://www.hp.com/support/BL460cG7
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 8
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Standard Features
Availability
Industry Standard
Compliance
Security
Security - Trusted
Platform Module
Dual-Port Fibre Channel Mezzanine Card options for redundant SAN connection
Dual-port embedded 10 Gigabit Ethernet adapters for redundant LAN connections
Two (2) hot-plug SAS/SATA hard drive bays and integrated RAID (HP Smart Array P410i
Controller)
Optional Battery-backed and Flash-backed write cache module for integrated RAID
controller
Redundant ROM
Advanced ECC Memory
Support for Memory Mirroring and Memory Lock-Step Mode
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted
load balancing)
ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
IMPI 2.0 Compliant
SMASH CLP Compliant
Power-on password
Administrator's password
Integrated Lights-Out 3 has 12 customizable user accounts and SSL encryption
The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used
to authenticate the server platform. These artifacts can include passwords, certificates and
encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature
available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a
Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user
data and to ensure that a server running Windows Server 2008 has not been tampered with while
the system was offline.
NOTE: For more information about TPM, including a white paper, go to:
http://www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or
losing the key could result in data loss.
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries
and configurable network switches.
For more information on Factory Express services on your specific server model please contact
your sales representative or go to: http://www.hp.com/go/factory-express.html
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 9
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Standard Features
HP Enterprise
Configurator
The HP e-Configure Enterprise Configurator now provides factory default racking for our HP
hardware portfolio. This approach is aligned with our strategic direction to meet the needs and
expectations of our valued customers. If you require "custom" rack configuration, please contact
HP's Customer Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 10
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Service and Support
Service and Support
For increased uptime, productivity and ROI - HP Care Pack packaged services for Servers
These days, you need to get the most out of your server investment - you can't afford not to.
When you buy HP server products and solutions, it's also a good time to think about what levels of
service and support you may need. To help take the worry out of deploying, designing,
maintaining, and managing your environment, we've designed a portfolio of service options that
are as: flexible, reliable and scalable as your server. Unlike server-only vendors, we take a holistic
approach to your entire environment, bridging storage, servers, blades, software and network
infrastructures with our HP Care Pack packaged services for Servers.
Protect your business beyond the warranty
When it comes to robustness and reliability, standard warranties on today's computing equipment
have matured just as the technologies have matured. Good news on some fronts - but also a
source of potential problems and subsequent consequences that come from depending on
standard warranties alone. Standard warranty protects against product defects and some causes
of downtime - but not the business. By using a standard approach to warranty uplifts, such as HP
Care Pack Services, you can reduce downtime risks and be more certain of operational
consistency for both mission-critical and standard business computing. Simply put, HP Care Pack
Services normalize the warranty of combined products - helping you proactively guard against
unplanned downtime.
Extending warranties with HP Care Pack Services
For cost-effective upgrading or extending your standard warranty, HP Care Pack Services offer a
suite of standard reactive hardware and software support services that are sold separately, or
combined as with our Support Plus and Support Plus 24 services. The portfolio also provides a
combination of proactive and reactive services, such as Proactive 24 Service and Critical Service.
In addition, with HP Proactive Select we offer an innovative approach to service delivery that gives
you the flexibility to acquire the specific proactive services you need today, then add services as
your needs evolve. HP Proactive Select offers a broad set of technical or per-event type service
options - including server, storage, and network, SAN device, and software, environment,
installation and education services. Services that you can mix and match depending on your
specific requirements, from preliminary planning and equipment delivery to installation,
configuration, integration, and testing, through every level of ongoing support. Our HP Care Pack
packaged services for Servers assures help when you need it most. And for many products, postwarranty HP Care Pack Services are available when your original warranty has expired.
HP Server Services: Offering reliability, flexibility and value - just like your storage
HP Server Services offers a full spectrum of customer care, from technology support to complex
migrations to complete completely managed services. HP Factory Express provides
customization, integration and deployment services for turnkey solutions. HP Education offers
flexible, comprehensive training on server networking and server software to help your IT staff get
the most out of your investments. And HP Financial solutions extend innovative financing and
asset management programs to cost-effective buy, manage and eventually retire your older
equipment.
HP Server Services, the trusted business technology experts who manage your technology in
action, because when technology works, business works. http://www.hp.com/services/servers,
http://www.hp.com/services/storage
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using HP
order configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at:
http://www.hp.com/go/lookuptool
NOTE: Care Pack Services availability may vary by product and country.
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 11
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Service and Support
Recommended HP Care Pack Services for optimal satisfaction with your HP
product
Recommended
Services
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service - 24-hour CTR
This cost-effective service helps you minimize system downtime due to hardware failure. It
features a commitment to resolve hardware problems within 24 hours from the time your service
call is received.
When you experience system problems, your call is immediately connected to an HP-certified
resolution engineer for troubleshooting. If your problem cannot be resolved remotely, an
experienced support professional is dispatched to your site to begin hardware repair activities.
HP is committed to repairing your hardware within a maximum of 24 hours. The benefits include:
Improved system uptime
Predictable repair times
More effective IT resource planning
Consistent level of hardware support across your multi-technology systems
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service - 6-hour CTR
This cost-effective service helps you minimize system downtime due to hardware failure. It
features a commitment to resolve hardware problems within 24 hours from the time your service
call is received.
When you experience system problems, your call is immediately connected to an HP-certified
resolution engineer for troubleshooting. If your problem cannot be resolved remotely, an
experienced support professional is dispatched to your site to begin hardware repair activities.
HP is committed to repairing your hardware within a maximum of 6 hours. The benefits include:
Improved system uptime
Predictable repair times
More effective IT resource planning
Consistent level of hardware support across your multi-technology systems
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN
HP Installation and Startup of HP ProLiant Servers
HP Installation and Startup of HP ProLiant Servers provides for the installation of your new HP
ProLiant server and operating system. This will assist you in bringing your new HP ProLiant server
and operating system into operation in a timely and professional manner.
This service provides a trained HP service specialist to perform an installation that meets HP
quality standards, for:
Delivery of the service at a mutually scheduled time convenient to your organization
Availability of an HP service specialist to answer basic questions during the onsite delivery
of this service
Custom installation as detailed in "Delivery specifications" or in a Statement of Work (SOW)
Verification prior to installation that all service prerequisites are met
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-7572ENN
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 12
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Service and Support
Optional HP Care Pack Services that will enhance your HP product experience
Optional Services
3-Year HP Hardware Support Onsite Service, 4-hour response, 24x7
As an alternative to our recommended support level, for customers who need same day response
server level 24x7.
3-Year, 24x7 Same-Business Day, 4-Hour response coverage provides high-quality remote
assistance and onsite support for your covered hardware, helping you to improve product uptime.
You have the flexibility to choose between different service-level options featuring different
response times and coverage windows, as well as between several coverage periods to address
your specific service needs.
Service benefits:
Help improve or maintain system uptime
Convenient onsite support
Reliable response times
Remote problem diagnosis and support
Onsite hardware support
Materials included
Service-level options with different coverage windows and response times
Work to completion
Escalation management
Access to electronic support information and services
HP electronic remote monitoring and support solution (for eligible products only)
Optional Defective media Retention Service
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
3-Year HP Software Support 24x7
As an alternative to our recommended support level, for customers who need access to software
updates and responsive 24x7 software support:
HP Software Support provides comprehensive software support for HP and select third-party
software. With HP Software Support, your IT staff has fast, reliable access to HP response
Centers. HP Response Venter engineers work with your IT team to provide advice on software
features and use, problem diagnosis and resolution, software defect identification and access to
patches.
Support benefits:
Problem resolution - Gain access to expert technical resources
Access - Use online around-the-clock support case submission, patch downloads and
knowledge base search
Stability - Increase system performance and reduce downtime due to software defects
Predictability - Update HP and select third-party software at predictable costs
Reduced TCO - Reduce the cost of purchasing individual software updates through
substantial subscription savings
Communication - Notify system managers when new software versions are made available
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE
3-Year HP Proactive 24
As an alternative to our recommended support level, for customers who want enhanced
operational effectiveness and proactive problem identification.
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 13
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Service and Support
HP Proactive 24 Service (P24) integrates hardware and software support to help you to improve
the stability and operational effectiveness of your IT environment. An HP Account Manager acts
as your primary point of contact to ensure that HP meets your support needs effectively.
P24 provides the maximum value when multiple technologies in the environment (e.g. servers,
storage, SAN and the network), are all covered. It provides an environment-wide view and
consistent support of all of these components which affect stability of your key applications.
Choose P24 when you want to:
Enhance operational effectiveness with proactive problem identification and
recommendations from HP
Partner with technical experts who help coordinate support, provide hands-on assistance,
and share knowledge with your staff
Rapidly access support and expertise spanning your environment
Obtain personalized services tailored to your business environment and critical success
factors
Anticipate necessary change - and execute it correctly the first time
Efficiently manage infrastructure resources to meet your performance objectives
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-1614ENUC
eSupport
HP eSupport is a portfolio of technology-based services that assist you with managing your
business environment - from the desktop to the data center.
Support Portal
The HP support portal provides one-stop access to the information, tools and services you need
to manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service agreement. To access the
support portal, visit: http://www.hp.com/support
HP Insight Remote Support software delivers secure remote support for your HP Servers and
Storage, 24 X 7, so you can spend less time solving problems and more time focused on your
business. You can have your systems remotely monitored for hardware failure using secure
technology that's been proven at thousands of companies around the world. In many cases, you
can avoid problems before they occur.
Customer Technical
Training
HP Services continues to be recognized for service and support excellence by customers,
partners, industry organizations and publications around the world. Recent honors and award
reflect our services team's dedications, technical expertise, professionalism and uncompromising
commitment to customer satisfaction. For a list of all our awards, please visit:
http://h20219.www2.hp.com/services/cache/433028-0-0-225-121.htm
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 14
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Service and Support
HP Services Awards
HP Services continues to be recognized for service and support excellence by customers,
partners, industry organizations and publications around the world. Recent honors and award
reflect our services team's dedications, technical expertise, professionalism and uncompromising
commitment to customer satisfaction. For a list of all our awards, please visit:
http://h20219.www2.hp.com/services/cache/433028-0-0-225-121.htm
Additional Services
Information
For more information about HP Care Pack Services for Servers, please visit:
http://www.hp.com/services/servers
To learn more on HP ProLiant servers and HP BladeSystem, please contact your HP sales
representative or HP Authorized Channel Partner, or visit: www.hp.com/services/proliant or
www.hp.com/services/bladesystem.
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 15
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Models
Models
NOTE: Not all models are available in all regions. Check with your local country HP offices for availability.
HP ProLiant BL460c G7 Processor(s)
(1) Intel® Xeon® Processor X5670 (2.93 GHz, 12MB L3 Cache, 95W,
X5670 12G 1P Server One of the following
DDR3-1333, HT, Turbo 2/2/2/2/3/3)
603251-B21
depending on model
(1) Intel® Xeon® Processor X5650 (2.66 GHz, 12MB L3 Cache, 95W,
DDR3-1333, HT, Turbo 2/2/2/2/3/3)
HP ProLiant BL460c G7
(1) Intel® Xeon® Processor E5640 (2.66 GHz, 12MB L3 Cache, 80W,
X5650 6G 1P Server
DDR3-1066, HT, Turbo 1/1/2/2)
603259-xx1
(1) Intel® Xeon® Processor E5620 (2.40 GHz, 12MB L3 Cache, 80W,
DDR3-1066, HT, Turbo 1/1/2/2)
HP ProLiant BL460c G7
(1) Intel® Xeon® Processor E5506 (2.13 GHz, 4MB L3 Cache, 80W,
E5640 6G 1P Server
DDR3-800)
603569-B21
(1) Intel® Xeon® Processor L5640 (2.26 GHz, 12MB L3 Cache, 60W,
DDR3-1333, HT, Turbo 2/2/3/3/4/4)
HP ProLiant BL460c G7 Cache Memory
4MB or 12MB shared L3 cache
E5620 6G 1P Server
Memory
12 GB (3 x 4 GB) PC3-10600 (DDR3-1333) Registered DIMMs
603588-B21
One of the following
6 GB (3 x 2 GB) PC3-10600 (DDR3-1333) Registered DIMMs
depending on model
12GB (3 x 4 GB) PC3L-10600 (DDR3-1333) Low Voltage Registered
HP ProLiant BL460c G7
DIMMs
E5506 6G 1P Server
Network Adapter
Embedded NC553i Dual Port FlexFabric 10GbE Converged Network
603591-B21
Adapter and one (1) additional 10/100 server adapter dedicated to iLO 3
Management
HP ProLiant BL460c G7
L5640 LV12G 1P Server Storage Controller
HP Smart Array P410i Controller (RAID 0/1)
603256-B21
Hard Drives
None ship standard
Internal Storage
Two Hot Plug SFF Drive Bays
Optical Drive
None
Form Factor
Up to eight (8) half-height blades supported in the HP BladeSystem
c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem
c7000 Enclosure
Country Code
xx = B2
xx = 20
Worldwide
Brazil
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 16
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order server blades must start with a CTO Blade.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP BL460c G7 CTO Blade
Configurable Model ships with:
Integrated NC553i Dual Port FlexFabric 10Gb Converged Network Adapter and
one (1) additional 10/100 server adapter dedicated to iLO 3 management
Smart Array P410i Controller with no cache
Integrated Lights-Out 3 Standard Blade Edition
603718-B21
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted)
HP Processors
HP Memory
For single processor configuration choose:
Six Core Processor Option Kits
NOTE: If two processors are desired, select one xxxxxx-L21 and one xxxxxxB21.
HP BL460c G7 X5670 (2.93 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/2/2/3/3) FIO Kit
HP BL460c G7 X5660 (2.80 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/2/2/3/3) FIO Kit
HP BL460c G7 X5650 (2.66 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/2/2/3/3) FIO Kit
HP BL460c G7 L5640 (2.26 GHz, 12MB L3 Cache, 60W, DDR3-1333, HT, Turbo
2/2/3/3/4/4 FIO Kit
Four Core Processor Option Kits
HP BL460c G7 X5667 (3.06 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 1/1/2/2) FIO Kit
HP BL460c G7 L5630 (2.13 GHz, 12MB L3 Cache, 40W, DDR3-1066, HT, Turbo
1/1/2/2) FIO Kit
HP BL460c G7 E5640 (2.66 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2) FIO Kit
HP BL460c G7 E5630 (2.53 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2) FIO Kit
HP BL460c G7 E5620 (2.40 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2) FIO Kit
HP BL460c G7 E5506 (2.13 GHz, 4MB L3 Cache, 80W, DDR3-800) FIO Kit
Two Core Processor Option Kits
HP BL460c G7 E5503 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800) FIO Kit
Registered DIMMS (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
610859-L21
603254-L21
610860-L21
610863-L21
626902-L21
603574-L21
610861-L21
610862-L21
612127-L21
610864-L21
612890-L21
500656-B21
500658-B21
593339-B21
Page 17
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Configuration Information - Factory Integrated Models
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
604504-B21
500662-B21
604506-B21
500666-B21
500668-B21
500670-B21
500672-B21
NOTE: PC3L is low voltage memory.
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional
options, including server blade enclosures interconnect options and power subsystem options; please see the Core Options
and Additional sections below; or the following QuickSpecs:
HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
and HP BladeSystem c-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html.
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 18
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Core Options
HP Ethernet Mezzanine Gigabit Ethernet Mezzanines
Options
HP NC325m PCI Express Quad Port 1Gb Server Adapter for c-Class
BladeSystem
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on 2 of the 4 ports.
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on only 2 of the 4 ports.
HP NC382m Dual Port 1GbE Multifunction BL-c Adapter
HP BLc QLogic iSCSI Dual Port Adapter
NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000
Mbps, full duplex per port only. For more information, see the "Network
Controller" segment in the Standards Features section.
10 Gigabit Ethernet Mezzanines
HP NC522m Dual Port 10GbE Multifunction BL-c Adapter
NOTE: The NC522m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000
Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC522m requires a minimum of 2 GB of server memory.
NOTE: The NC522m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 enabled module and will link with all current 1Gb
switches at 1Gb.
HP NC532m Dual Port 10GbE BL-c Adapter
NOTE: The NC532m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000
Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure).
NOTE: The NC532m requires a minimum of 2 GB of server memory.
NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 enabled module and will link with all current 1Gb
switches at 1Gb.
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
NOTE: The NC542m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000
Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure)
NOTE: The NC542m requires a minimum of 2 GB of server memory.
NOTE: The NC542m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 device. The NC542m will only support 1000Mbps when
connected to a 1Gb Ethernet interconnect.
HP NC550m 10GbE 2-port PCIe x8 Flex-10 Ethernet Adapter
NOTE: The NC550m network adapter card is required for each server blade
connecting to a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000
Enclosure) or bays 3-4 (HP BladeSystem c3000 Enclosure)
NOTE: The NC550m requires a minimum of 2 GB of server memory.
NOTE: The NC550m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 device. The NC550m will only support 1000Mbps when
connected to a 1Gb Ethernet interconnect.
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
416585-B21
447883-B21
453246-B21
488074-B22
467801-B21
467799-B21
539857-B21
581204-B21
Page 19
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Core Options
HP Fiber Channel
Mezzanine Options
HP Processors
Brocade 804 8Gb FC HBA for HP BladeSystem c-Class
HP BLc Emulex LPe1205- 8Gb FC HBA for HP c-Class BladeSystem
Emulex LPe1105 FC Dual Channel 4Gb, PCI-E-to-Fibre Channel Host Bus
Adapter
QLogic QMH2562 8Gb FC HBA for HP c-Class BladeSystem
QLogic QMH2462 4Gb FC HBA for HP c-Class BladeSystem
Six Core Processor Option Kits
HP BL460c G7 X5670 (2.93 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/2/2/3/3) Kit
HP BL460c G7 X5660 (2.80 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/2/2/3/3) Kit
HP BL460c G7 X5650 (2.66 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/2/2/3/3) Kit
HP BL460c G7 L5640 (2.26 GHz, 12MB L3 Cache, 60W, DDR3-1333, HT, Turbo
2/2/3/3/4/4 Kit
Four Core Processor Option Kits
HP BL460c G7 X5667 (3.06 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 1/1/2/2) Kit
HP BL460c G7 L5630 (2.13 GHz, 12MB L3 Cache, 40W, DDR3-1066, HT, Turbo
1/1/2/2) Kit
HP BL460c G7 E5640 (2.66 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2) Kit
HP BL460c G7 E5630 (2.53 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2) Kit
HP BL460c G7 E5620 (2.40 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2) Kit
HP BL460c G7 E5506 (2.13 GHz, 4MB L3 Cache, 80W, DDR3-800) Kit
Two Core Processor Option Kits
HP BL460c G7 E5503 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800) Kit
HP Memory
Registered DIMMS (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
590647-B21
456972-B21
403621-B21
451871-B21
403619-B21
610859-B21
603254-B21
610860-B21
610863-B21
626902-B21
603574-B21
610861-B21
610862-B21
612127-B21
610864-B21
612890-B21
500656-B21
500658-B21
593339-B21
604504-B21
500662-B21
604506-B21
500666-B21
500668-B21
Page 20
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Core Options
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see:
http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
NOTE: PC3L is a low voltage memory.
HP Hard Drives
500670-B21
500672-B21
NOTE: The components of a storage subsystem (e.g. the drive, the
HBA/controller, firmware, and the server backplane) should operate at the same
data transfer rate or the system bandwidth will be negotiated down to an
acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 146GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 72GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty
Hard Drive
NOTE: Please see QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)
NOTE: The hard drive options are not required when configuring a Drive-less
Model.
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
HP 160GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
SATA Hot Plug SFF (2.5-inch) Entry (ETY) Drives
HP 250GB 3G SATA 5.4K rpm SFF (2.5-inch) Entry 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html
(Worldwide)
SATA Hot Plug SFF Midline Solid State Drives
HP 60GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive
HP 120GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13121_div/13121_div.html
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
507127-B21
512547-B21
507125-B21
512545-B21
507610-B21
507750-B21
530888-B21
460355-B21
572071-B21
572073-B21
Page 21
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Additional Options
HP Insight software
HP Insight Control
HP Insight Control, No Media, Electronic License including 1 year of 24x7
Technical Support and Updates
HP Insight Control, No Media 1-Server License including 1 year of 24x7
Technical Support and Updates
HP Insight Software Media Kit
NOTE: Insight Software DVD media without licenses. Contains Insight Control,
Insight Dynamics and Virtual Connect Enterprise Manager. Uses an integrated
installer to perform quick and accurate software installation and updates.
NOTE: Licenses ship without media. The HP Insight Control Media Kit can be
ordered separately, or can be downloaded at:
http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support & Update Service.
NOTE: For additional license kits, including bundles with HP BladeSystem
enclosures, please see the Insight Control QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP Insight Control for Linux
HP Insight Control for Linux, 1-server license, including one year of 24x7
Technical Support and Updates, Electronic
NOTE: This part number can be purchased as a single license or as multiple
licenses with a single activation key. Customer will receive a license entitlement
certificate via e-mail. The license entitlement certificate must be redeemed
online or via fax in order to obtain the license activation key(s). Includes one
year of 24 x 7 HP Software Technical Support and Update Service.
NOTE: Electronic LTUs are only available through limited points of sales; if not
available, order a printed license entitlement certificate instead.
HP Insight Control for Linux, No Media, 1-Server license, including one year of
24x7 Technical Support and Updates
HP Insight Control for Linux, Media pack (DVD) - No licenses included
NOTE: This optional Media pack DVD contains the ISO image for HP Insight
Control for Linux, HP Systems Insight Manager, HP Insight Control power
management, HP Insight Control virtual machine management, and an
integrated installer. Servers must be acquired separately.
NOTE: This Media pack is optional because the latest ISO image and latest
updates may be downloaded at no cost from: http://www.hp.com/go/ic-linux (click
on Download button).
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux
can be ordered separately, or can be downloaded at: http://www.hp.com/go/iclinux (click on Download button).
NOTE: Electronic licenses can be used to purchase multiple licenses with a
single activation key, and are available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, including electronic licensing options, please
see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
T9074BAE
452148-B22
436222-B21
TC213AAE
TC209A
TC208A
Page 22
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Additional Options
High Performance
Clusters
HP Security - TPM
HP Cluster Management Utility
HP Cluster Management Utility Compute Node Flexible License
NOTE: This part number can be used to purchase one certificate for multiple
licenses with a single activation key. Each license is for one node (server).
Customer will receive a printed end user license agreement and license
entitlement certificate via physical shipment. The license entitlement certificate
must be redeemed online in order to obtain a license key.
HP Cluster Management Utility License and Media
NOTE: Order a minimum of one license per cluster to purchase media including
software and documentation, which will be delivered to the customer, and also
licenses CMU management. No license key is delivered or required.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
HP HPC Linux Value Pack
HP High Performance Computing Linux Value Pack 1 Processor Flexible
License
NOTE: This part number can be used to purchase one certificate for multiple
licenses with a single activation key. Each license is for one socket (a.k.a.
processor). Customer will receive a printed end user license agreement and
license entitlement certificate via physical shipment. The license entitlement
certificate must be redeemed online in order to obtain a license key.
HP High Performance Computing Linux Value Pack Media Kit
NOTE: This part number can be used to purchase media including software and
documentation, which will be delivered to the customer.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html
HP Trusted Platform Module (TPM) Kit
NOTE: The TPM key is unique to every TPM deployed server and must be
retained. Misplacing or losing the key could result in data loss.
HP Storage Controllers HP Smart Array P700M/512 Controller
HP Smart Array P700M/256 Controller
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13175_div/13175_div.html
(Worldwide)
Optional Upgrades
HP Smart Array P-Series Low Profile Battery
NOTE: The Smart Array Low Profile Battery supports the HP Smart Array P700m
Controller.
NOTE: The Smart Array battery option kit is required to enable battery-backed
write cache (BBWC).
NOTE: The options listed below supports the integrated HP Smart Array P410i.
HP 256MB P-series Cache Upgrade
HP 650 mAh P-Series Battery
NOTE: This kit is only for use with the 256 MB Cache Module.
NOTE: This kit includes the cable required to attach battery to cache.
HP 512MB P-Series Battery Backed Write Cache Upgrade
NOTE: This kit includes the cable required to attach battery to cache.
HP 512MB Flash Backed Write Cache
HP 1G Flash Backed Write Cache
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
436284-B21
433257-B21
TC293A
TC294A
488069-B21
508226-B21
507925-B21
452348-B21
462968-B21
462969-B21
462967-B21
534916-B21
534562-B21
Page 23
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Additional Options
HP Smart Array Advanced Pack No Media 1-Server license including 1yr 24x7
Technical Support
NOTE: A license key, a minimum of 256MB cache, and battery kit is required to
enable Smart Array Advanced Pack features. For more information go to:
http://www.hp.com/go/saap
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13201_div/13201_div.html
(Worldwide)
HP I/O Expansion
Options
516471-B21
HP StorageWorks 80GB IO Accelerator for BladeSystem c-Class
HP StorageWorks 160GB IO Accelerator for BladeSystem c-Class
HP StorageWorks 320GB IO Accelerator for BladeSystem c-Class
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13220_div/13220_div.html
AJ876A
AJ877A
AJ878A
HP c-Class Mezzanine QLogic 4X QDR IB Dual Port Mezzanine HCA for HP BladeSystem c-Class
Options
HP 4X DDR IB Dual Port Mezzanine HCA for HP BladeSystem c-Class
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12586_div/12586_div.html
583210-B21
448262-B21
HP Ultrium Tape
Blades
HP StorageWorks SB1760c Tape Blade
NOTE: LTO-4 Ultrium tape technology.
HP StorageWorks SB920c Tape Blade
NOTE: LTO-3 Ultrium technology.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12729_div/12729_div.html
AQ697A
HP StorageWorks
SB40c Storage Blade
HP StorageWorks SB40c Storage Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12587_div/12587_div.html
(Worldwide)
411243-B21
HP Expansion Blade
HP PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one
PCIe connect board which requires installation.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.html
448018-B21
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
AJ401A
Page 24
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Additional Options
HP USB and SD
Options
HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver)
HP USB Standard Keyboard
HP 2GB USB Flash Media Drive Key
NOTE: HP qualified blank USB key for use with HP ProLiant servers that support
the VMware virtualization environment and other HP value-add software like
Smartstart. HP recommends this industry standard USB flash device for use with
VMware ESXi. USB device must be installed in the internal slot of the ProLiant
server for use with VMware ESXi. Refer to HP VMware Getting Started Guide for
installation instructions.
HP 4GB SD Flash Media
NOTE: Blank SD media devices are supported for use with VMware and Citrix.
SD media must be installed in the internal slot of the ProLiant server. Learn
more at: http://www.hp.com/go/proliantvirtualization
DC172B
DT528A#ABA
608447-B21
580387-B21
HP Care Pack Services NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class
server blades, cover the server blade and all HP branded hardware options
qualified for the server, purchased at the same time or afterwards, internal to the
server.
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
UK065E
UK066E
UK067E
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 25
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Memory Population Guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Some DIMM installation guidelines are summarized below:
For the HP ProLiant BL460c G7 server with twelve (12) memory slots:
There are three (3) channels per processor; six (6) channels per server
There are two (2) DIMM slots for each memory channel; twelve (12) total slots.
Memory channel 1 consists of the two (2) DIMMs that are closest to the processor
Memory channel 3 consists of the two (2) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs).
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired
slots will be 1,4; 2,5 on the BL460c G7
Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of
supporting 1.5V operations
DIMM slot/capacity/populated speed table
DIMM Type
Unbuffered with ECC
DIMMs (UDIMMs)
Single
Rank
Dual Rank (2R)
Quad Rank (4R) (1R) Dual Rank (2R)
4GB
8GB
8GB
4GB 16GB
1GB
2GB
4GB
1333
1066
1333
1066
1066
1333
1333
1333
Reg
Reg LV/Reg Reg
Reg
Reg
Reg
Reg
Registered DIMMS (RDIMMs)
DIMM Rank
DIMM Capacity
DIMM Native Speed (MHz)
DIMM Voltage
SLOTS THAT CAN BE POPULATED
12 slot servers
Single
Rank
(1R)
4GB
1333
LV/Reg
2GB
1333
Reg
12
12
12
12
12
12
12
12
12
12
48
24
48
96
96
48
192
12
24
48
1333
1333*
1066
800
1066
800
1333
1333*
1333
1333*
1333
1333*
MAXIMUM CAPACITY (GB)
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel
1333
1333
1333
1066
2 DIMM Per Channel
1333 1333* 1333* 1066
* Supported at 1333 via setting in ROM based setup utility (RBSU).
NOTES:
PC3-10600 DIMMs have a maximum speed of 1333MHz. PC3-8500 DIMMs have a maximum speed of 1066MHz.
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if
the slower DIMM is on the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be
1066MHz
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 26
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Memory
other channels, the maximum speed will be 1066MHz
Maximum memory speed will also depend on the processor installed
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
HP ProLiant BL460c G7 Server Blade DIMM slot and configuration diagrams
Basic memory slot and population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
Chnl 1
slot #
1
2
12 DIMM SLOTS (6 per CPU node)
CPU1
CPU2
population order
slot #
population order
D
1
D
A
2
A
Chnl 1
Chnl 2
3
4
E
B
3
4
E
B
Chnl 2
Chnl 3
5
6
F
C
5
6
F
C
Chnl 3
HP ProLiant BL460c G7 Server Blade (1P Model)
Standard memory configuration (1 CPU model)
6GB (3 x 2GB) of PC3-10600 (DDR3-1333) RDIMMs
Chnl 1
slot #
1
2
CPU1
population order
D: empty
A: 2GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: empty
B: 2GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: empty
C: 2GB DIMM
5
6
F: empty
C: empty
Chnl 3
Standard Memory Plus Optional Memory (1 CPU model)
30 GB of PC3-10600 (DDR3-1333) RDIMMs (3 x 2GB plus 3 x 8GB)
Chnl 1
slot #
1
2
CPU1
population order
D: 2GB DIMM
A: 8GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: 2GB DIMM
B: 8GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: 2GB DIMM
C: 8GB DIMM
5
6
F: empty
C: empty
Chnl 3
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 27
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Memory
Standard Memory Replaced with Optional Memory (1 CPU model)
96GB of PC3-8500 Quad-Rank RDIMMs (6 x 16GB)
Chnl 1
slot #
1
2
CPU1
population order
D: 16GB DIMM
A: 16GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: 16GB DIMM
B: 16GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: 16GB DIMM
C: 16GB DIMM
5
6
F: empty
C: empty
Chnl 3
UDIMM maximum configuration (1 CPU model)
24GB, consisting of six (6) 4GB dual-rank PC3-10600 UDIMMs
Chnl 1
slot #
1
2
CPU1
population order
D: 4GB DIMM
A: 4GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Chnl 1
Chnl 2
3
4
E: 4GB DIMM
B: 4GB DIMM
3
4
E: empty
B: empty
Chnl 2
Chnl 3
5
6
F: 4GB DIMM
C: 4GB DIMM
5
6
F: empty
C: empty
Chnl 3
Standard Memory Replaced with Optional Memory (2 CPU Model)
RDIMM maximum configuration
192GB, consisting of twelve (12) 16GB quad-rank PC3-8500 RDIMMs
Chnl 1
slot #
1
2
CPU1
population order
D: 16GB DIMM
A: 16GB DIMM
slot #
1
2
CPU2
population order
D: 16GB DIMM
A: 16GB DIMM
Chnl 1
Chnl 2
3
4
E: 16GB DIMM
B: 16GB DIMM
3
4
E: 16GB DIMM
B: 16GB DIMM
Chnl 2
Chnl 3
5
6
F: 16GB DIMM
C: 16GB DIMM
5
6
F: 16GB DIMM
C: 16GB DIMM
Chnl 3
UDIMM maximum configuration (2 CPU model)
48GB, consisting of twelve (12) 4GB dual-rank PC3-10600 UDIMMs
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 28
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Memory
Chnl 1
slot #
1
2
CPU1
population order
D: 4GB DIMM
A: 4GB DIMM
slot #
1
2
CPU2
population order
D: 4GB DIMM
A: 4GB DIMM
Chnl 1
Chnl 2
3
4
E: 4GB DIMM
B: 4GB DIMM
3
4
E: 4GB DIMM
B: 4GB DIMM
Chnl 2
Chnl 3
5
6
F: 4GB DIMM
C: 4GB DIMM
5
6
F: 4GB DIMM
C: 4GB DIMM
Chnl 3
NOTE: Capacity references are rounded to the common Gigabyte values.
1GB = 1024MB
2GB = 2048MB
4GB = 4096MB
8GB = 8192MB
16GB = 16384MB
Following are memory options available from HP:
HP Memory
Registered DIMMs (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9
Low Power Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3
Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: PC3L is a low voltage memory.
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
500656-B21
500658-B21
593339-B21
604504-B21
500662-B21
604506-B21
500666-B21
500668-B21
500670-B21
500672-B21
Page 29
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Storage
1-2
2 x SFF SAS or SATA Hot Plug Hard Drives or
SATA solid state drives
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane)
should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Quantity
Position
Supported
Supported Controller
300GB 6G SAS 10K
146GB 6G SAS 15K
146GB 6G SAS 10K
72GB 6G SAS 15K
2
1-2
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
500GB 3G SATA 7.2K
2
1-2
HP Smart Array P410i Controller
Controller
HP Smart Array P410i Controller
SATA Non-Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported Controller
500GB 3G SATA 7.2K
2
1-2
HP Smart Array P410i Controller
160GB 3G SATA 7.2K
SATA Hot Plug SFF (2.5-inch) Entry (ETY) Drives
Quantity
Position
Supported
Supported
250GB 3G SATA 5.4K
2
1-2
SATA Hot Plug SFF Midline solid state drives
Quantity
Position
Supported
Supported
60GB 3G SATA SSD
2
1-2
120GB 3G SATA SSD
Controller
HP Smart Array P410i Controller
Controller
HP Smart Array P410i Controller
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 30
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Storage
External Storage
Quantity
Position
Supported
Supported Host Controller or Adapter
XP Disk Array Systems Please see the
External
Please see the XP Disk Array Systems Quick Specs for the
XP Disk Array
latest list of supported HBAs
Systems
QuickSpecs
below to
determine
configuration
requirements
HP StorageWorks XP10000 Disk Array:
http://h18006.www1.hp.com/products/storageworks/xp10000/index.html (Worldwide)
Enterprise Virtual Array Please see the
External
Please see the XP Disk Array Systems Quick Specs for the
Systems
XP Disk Array
latest list of supported HBAs
Systems
QuickSpecs
below to
determine
configuration
requirements
HP StorageWorks Enterprise Virtual Array Family:
http://h18006.www1.hp.com/products/quickspecs/12408_div/12408_div.html (Worldwide)
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 31
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Technical Specifications
System Unit
Dimensions (H x W x D) 7.154 x 2.19 x 20.058 in (18.17 x 5.56 x 50.95 cm)
(with bezel)
Weight
Maximum
16.5 lb (7.5 kg)
(approximate)
(all hard drives and
processors installed)
Minimum
11.50 lb (5.22 kg)
(one hard drive and
processor installed)
Power Specifications For power specifications including Input Requirements, BTU Rating, and
Power Supply Output, please see the HP BladeSystem c-Class
Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
To review typical system power ratings use the HP BladeSystem Power
Sizer which is available via the online tool located at URL:
http://www.hp.com/go/bladesystem/powercalculator
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, noncondensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
Operating
3050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
For acoustic noise specifications, please see the HP BladeSystem cClass Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 32
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Technical Specifications
12810_div.html
HP Smart Array P410i Disk Drive Interface
Controller
Server Interface
Cache Memory
6Gb/s SAS (Serial Attached SCSI)
3Gb/s SATA (Serial ATA)
x4 PCI Express host interface
0 MB (none) standard
Optional 256MB, 512MB, or 1GBCache Memory
2 (with standard 0MB cache)
Logical Drives
Supported
Maximum Logical Drive32 (with optional 256MB cache)
Capacity
64 (with optional 512MB cache)
Host Memory
64-bit, supporting servers memory space greater than 4 GB
Addressing
RAID Support
RAID 1( Mirroring)
RAID 0 (Striping)
Upgradeable Firmware Controller: Upgradeable Firmware with Recovery ROM feature
Online Drive Flash (with SAS drives) requires 256MB, 512MB, or 1GB
module
Embedded HP NC553i Type
Dual Port FlexFabric Network Processor
10Gb Converged
Data Transfer Method
Network Adapter
Network Transfer Rate
IEEE Compliance
Standard Features
Integrated dual-port KR 10Gb with FlexFabric (FCoE or iSCSI) capability
ServerEngines BE3
x8 PCI Express 2.0
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex
theoretical bandwidth
NOTE: Each port is autosensing 1 Gb / 10 Gb, and can interoperate
with 1 Gb HP BladeSystem c-Class interconnect components. Both
ports will operate at the same speed.
NOTE: Each port on the NC553i adapter transmits from the server at
only 20 Gbps (theoretical) full duplex.
802.1p QoS, 802.1Q VLAN tagging, 802.3ad link aggregation, 802.3ap
10GBase-KR, and 802.3x flow control
ProLiant Teaming including Network Fault Tolerance, Transmit
Load Balancing, and Switch-Assisted Load Balancing
9K Jumbo frames (4K Jumbo frames when in FCoE mode)
Microsoft Windows Receive Side Scaling (RSS)
Optional accelerated iSCSI
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 33
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Technical Specifications
HP Integrated LightsOut 3 (iLO 3)
integrated on system
board
Architecture
Processor
Upgradeability
Video Support
Interfaces
Memory
Operating System
Support
PCI Express based health and remote management ASIC
PCI Express RISC processor core running at 250MHz
Option firmware upgradeable via Flash ROM
1600 x 1200 DVR max resolution
One Ethernet Sideband connection (10/100/1000 Mb/s)
One Ethernet network connection (10/100Mb/s)
128-MB DDR with ECC
Microsoft Windows 2008 R2
Microsoft Windows 2008 (32 bit and 64 bit)
Microsoft Windows Server 2008 Standard Edition (32bit and 64bit)
Microsoft Windows Server 2008 Enterprise Edition (32bit and 64bit)
Microsoft Windows Server 2003 and Windows Server 2003 R2, and
Windows Server 2003 for Extended Systems Standard Edition,
Enterprise Edition
Red Hat Enterprise Linux 5.4 (32 bit and 64 bit)
SUSE LINUX Enterprise Server 11 (32bit and 64bit)
SUSE LINUX Enterprise Server 10 (32bit and 64bit)
VMware ESX 4.0
VMware ESX 3.5.0
Client System Support Microsoft Windows 7
Microsoft Windows XP Professional Edition
Microsoft Windows Vista Business and Ultimate Editions
Red Hat Enterprise Desktop 5.00
SUSE Linux Enterprise Desktop 11
SUSE Linux Enterprise Desktop 10
Client Browser Support Microsoft Internet Explorer 8
Microsoft Internet Explorer 7
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows and Linux systems)
Firefox 3.0 (on supported Windows and Linux systems)
Command Line
Secure Shell and serial port access
Support
Secure Socket Layer
Secure Shell version 2
Security
Advanced Encryption Standard (AES) and Triple Data Encryption
Standard (3DES) on browser, CLP and XML scripting interface
AES encryption of video
RC4 encryption of video
Directory Support
Active Directory v1.0 (Windows 2003)
Services
Driver Support
HP ProLiant iLO3 Management Controller Driver Package
Management protocols SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems
supported
Management Architecture for Server Hardware Command Line Protocol
(SMASH CLP), HP RIBCL XML
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 34
QuickSpecs
HP ProLiant BL460c Generation 7 Server Blade
Technical Specifications
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to: http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon
Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13706 Worldwide QuickSpecs — Version 1 — 9.8.2010
Page 35
Download PDF

advertising