Cinch Lock.indd
Nitrogen Gas Spring
Accessories
Cinch-Lock
Use the new Cinch-Lock bolt and urethane ring set to secure DADCO gas springs in a pocket
without additional mounting components.
Save space over bulky mounts
• Easily remove spring while still in the press
> C/2
• Mount gas springs without studs or screws
C
• Available in metric or imperial thread
12 MIN
(.47)
17.5
(.69)
Cinch-Lock must be secured using the
following torque specification:
For ̏C˝ Dimension, refer to appropriate
DADCO product catalog.
90.13M
247 lb·in / 28 N·m
90.13E
194 lb·in / 22 N·m
Cinch-Lock
90.13M (8 mm Tap)
90.13E (5/16˝–18 Tap)
øD Gas Spring Body Diameter
øD
15 mm
19 mm
25 mm
32 mm
38 mm
44.5 mm
50 mm
A
(.012)
Gas Spring Clearance
øD +.3
+.8 (.031)
8 mm Tap
18.25
.719
(5/16˝-18)
20.25
NOTE: 14 mm Minimum Tap Depth
.797
ø22.23 Urethane Ring
23.25
(.875)
.915
26.75
1.053
ø22.35 +.13 Urethane Clearance Pocket
+.25
29.75
1.171
R1.6
33.00
(.06)
(.880 +.005
+.010 )
1.299
35.75
A
1.407
B08105A
Installation Guidelines
•
•
•
•
Install Cinch-Lock next to the gas spring
Completely tighten bolt so urethane piece touches the gas spring
For use with gas springs 50 mm in body diameter and smaller
Recommended for use with self-contained gas springs only
734.207.1100 • 800.DADCO.USA • f a x 734.207.2222 • www.dadco.net
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising