LTC948x_Eng_IB _17815.QXD
LTC 948x Series
Instruction Manual
EN Housings
LTC 948x | Instruction Manual | Important Safeguards
EN | 2
Important Safeguards
1. Read, Follow, and Retain Instructions - All safety
and operating instructions should be read and
followed before operating the unit. Retain instructions
for future reference.
2. Heed Warnings - Adhere to all warnings on the unit
and in the operating instructions.
3. Attachments - Attachments not recommended by
the product manufacturer should not be used, as they
may cause hazards.
4. Installation Cautions - Do not place this unit on an
unstable stand, tripod, bracket, or mount. The unit
may fall, causing serious injury to a person and
serious damage to the unit. Use only manufacturerrecommended accessories, or those sold with the
product. Mount the unit per the manufacturer's
instructions. Appliance and cart combination should
be moved with care. Quick stops, excessive force, or
uneven surfaces may cause the appliance and cart
combination to overturn.
5. Cleaning - Unplug the unit from the outlet before
cleaning. Follow any instructions provided with the
unit. Generally, using a damp cloth for cleaning is
sufficient. Do not use liquid cleaners or aerosol
cleaners.
6. Servicing - Do not attempt to service this unit
yourself. Opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
7. Damage Requiring Service - Unplug the unit from
the main AC power source and refer servicing to
qualified service personnel under the following
conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled or an object has fallen
into the unit.
• If the unit has been exposed to water and/or
inclement weather (rain, snow, etc.).
• If the unit does not operate normally, when
following the operating instructions. Adjust only
those controls specified in the operating
instructions. Improper adjustment of other controls
may result in damage, and require extensive work
by a qualified technician to restore the unit to
normal operation.
• If the unit has been dropped or the cabinet
damaged.
• If the unit exhibits a distinct change in
performance, this indicates that service is needed.
8. Replacement Parts - When replacement parts are
required, the service technician should use
replacement parts specified by the manufacturer or
that have the same characteristics as the original part.
Unauthorized substitutions may result in fire,
electrical shock or other hazards.
9. Safety Check - Upon completion of servicing or
repairs to the unit, ask the service technician to
perform safety checks to ensure proper operating
condition.
Bosch Security Systems | 30 August 2004
10. Power Sources - Operate the unit only from the type
of power source indicated on the label. If unsure of
the type of power supply to use, contact your dealer
or local power company.
• For units intended to operate from battery power,
refer to the operating instructions.
• For units intended to operate with External Power
Supplies, use only the recommended approved
power supplies.
• For units intended to operate with a limited power
source, this power source must comply with
EN60950. Substitutions may damage the unit or
cause fire or shock.
• For units intended to operate at 24VAC, normal
input voltage is 24VAC. Voltage applied to the
unit's power input should not exceed 30VAC.
User-supplied wiring, from the 24VAC supply to
unit, must be in compliance with electrical codes
(Class 2 power levels). Do not ground the 24VAC
supply at the terminals or at the unit's power
supply terminals.
11. Coax Grounding - If an outside cable system is
connected to the unit, ensure that the cable system is
grounded. U.S.A. models only - Section 810 of the
National Electrical Code, ANSI/NFPA No.70,
provides information regarding proper grounding of
the mount and supporting structure, grounding of the
coax to a discharge unit, size of grounding
conductors, location of discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode.
12. Grounding or Polarization - This unit may be
equipped with a polarized alternating current line
plug (a plug with one blade wider than the other).
This safety feature allows the plug to fit into the
power outlet in only one way. If unable to insert the
plug fully into the outlet, try reversing the plug. If the
plug still fails to fit, contact an electrician to arrange
replacement of the obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Alternately, this unit may be equipped with a
3-wire grounding plug (a plug with a third pin, for
grounding). This safety feature allows the plug to fit
into a grounding power outlet only. If unable to insert
the plug into the outlet, contact an electrician to
arrange replacement of the obsolete outlet. Do not
defeat the safety purpose of the grounding plug.
13. Lightning - For added protection during a lightning
storm, or when this unit is left unattended and
unused for long periods of time, unplug the unit from
the wall outlet and disconnect the cable system. This
will prevent damage to the unit due to lightning and
power line surges.
EN | 3
LTC 948x | Instruction Manual | Safety Precautions
For Indoor Product
1. Water and Moisture - Do not use this unit near
water - for example, in a wet basement, in an
unprotected outdoor installation or in any area
classified as a wet location.
2. Object and Liquid Entry - Never push objects of
any kind into this unit through openings, as they
may touch dangerous voltage points or short out
parts that could result in a fire or electrical shock.
Never spill liquid of any kind on the unit.
3. Power Cord and Power Cord Protection - For
units intended to operate with 230VAC, 50Hz,
the input and output power cord must comply
with the latest versions of IEC Publication 227 or
IEC Publication 245.
Power supply cords should be routed so they are
not likely to be walked on or pinched. Pay
particular attention to location of cords and plugs,
convenience receptacles, and the point of exit
from the appliance.
4. Overloading - Do not overload outlets and
extension cords; this can result in a risk of fire or
electrical shock.
For Outdoor Product
Power Lines - An outdoor system should not be
located in the vicinity of overhead power lines,
electric lights or power circuits, or where it may
contact such power lines or circuits. When
installing an outdoor system, extreme care should
be taken to keep from touching power lines or
circuits, as this contact might be fatal. U.S.A.
models only - refer to the National Electrical
Code Article 820 regarding installation of CATV
systems.
For Rack-mount Product
1. Ventilation - This unit should not be placed in a
built-in installation or rack, unless proper
ventilation is provided, or the manufacturer’s
instructions have been adhered to. The
equipment must not exceed its maximum
operating temperature requirements.
2. Mechanical Loading - Mounting of the
equipment in a rack shall be such that a
hazardous condition is not achieved due to
uneven mechanical loading.
Bosch Security Systems | 30 August 2004
Safety Precautions
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol indicates the presence of
uninsulated “dangerous voltage” within the
product’s enclosure. This may constitute a
risk of electric shock.
The user should consult the operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Attention: Installation should be performed by
qualified service personnel only in accordance
with the National Electrical Code or applicable
local codes.
Power Disconnect. Units with or without
ON-OFF switches have power supplied to the
unit whenever the power cord is inserted into the
power source; however, the unit is operational
only when the ON-OFF switch is in the ON
position. The power cord is the main power
disconnect for all units.
EN | 4
LTC 948x | Instruction Manual | Safety Precautions
Sicherheitshinweise
VORSICHT: UM EINEN ELEKTRISCHEN SCHLAG ZU
VERMEIDEN, IST DIE ABDECKUNG (ODER RÜCKSEITE) NICHT
ZU ENTFERNEN. ES BEFINDEN SICH KEINE TEILE IN DIESEM
BEREICH, DIE VOM BENUTZER GEWARTET WERDEN
KÖNNEN. LASSEN SIE WARTUNGSARBEITEN NUR VON
QUALIFIZIERTEM WARTUNGSPERSONAL AUSFÜHREN.
Das Symbol macht auf nicht isolierte „gefährliche Spannung"
im Gehäuse aufmerksam. Dies kann zu einem elektrischen
Schlag führen.
Der Benutzer sollte sich ausführlich über Anweisungen für
die Bedienung und Instandhaltung (Wartung) in den
begleitenden Unterlagen informieren.
Achtung! Die Installation sollte nur von qualifiziertem
Kundendienstpersonal gemäß jeweils zutreffender
Elektrovorschriften ausgeführt werden.
Unterbrechung des Netzanschlusses. Geräte mit oder ohne
Netzschalter haben Spannung am Gerät anliegen, sobald der
Netzstecker in die Steckdose gesteckt wird. Das Gerät ist jedoch
nur betriebsbereit, wenn der Netzschalter (EIN/AUS) auf EIN
steht. Wenn das Netzkabel aus der Steckdose gezogen wird, ist
die Spannungszuführung zum Gerät vollkommen unterbrochen.
Precauciones de Seguridad
PRECAUCIÓN: PARA DISMINUIR EL RIESGO DE DESCARGA
ELÉCTRICA, NO RETIRE LA CUBIERTA (NI LA PARTE
POSTERIOR). NO EXISTEN PIEZAS DE RECAMBIO EN EL
INTERIOR DEL EQUIPO. EL PERSONAL DE SERVICIO
CUALIFICADO SE ENCARGA DE REALIZAR LAS
REPARACIONES.
Sécurité
ATTENTION : POUR ÉVITER TOUT RISQUE D'ÉLECTROCUTION,
N'ESSAYEZ PAS DE RETIRER LE CAPOT (OU LE PANNEAU
ARRIÈRE). CET APPAREIL NE CONTIENT AUCUN COMPOSANT
SUSCEPTIBLE D'ÊTRE RÉPARÉ PAR L'UTILISATEUR. CONFIEZ
LA RÉPARATION DE L'APPAREIL À DU PERSONNEL QUALIFIÉ.
Ce symbole signale que le produit renferme une « tension
potentiellement dangereuse » non isolée susceptible de
provoquer une électrocution.
Ce symbole invite l'utilisateur à consulter les instructions
d'utilisation et d'entretien (dépannage) reprises dans la
documentation qui accompagne l'appareil.
Attention : l'installation doit exclusivement être réalisée par du
personnel qualifié, conformément au code national d'électricité
américain (NEC) ou au code d'électricité local en vigueur.
Coupure de l'alimentation. Qu'ils soient pourvus ou non d'un
commutateur ON/OFF, tous les appareils reçoivent de l'énergie une
fois le cordon branché sur la source d'alimentation. Toutefois,
l'appareil ne fonctionne réellement que lorsque
le commutateur est réglé sur ON. Le débranchement du cordon
d'alimentation permet de couper l'alimentation des appareils.
Veiligheidsmaatregelen
VOORZICHTIG: OPEN DE BEHUIZING OF DE ACHTERKANT
VAN HET APPARAAT NIET. ZO VERMINDERT U HET RISICO
OP ELEKTRISCHE SCHOKKEN. IN HET APPARAAT
BEVINDEN ZICH GEEN ONDERDELEN DIE U ZELF KUNT
REPAREREN. LAAT SERVICE EN ONDERHOUD UITVOEREN
DOOR GEKWALIFICEERD PERSONEEL.
Este símbolo indica que existen puntos de tensión peligrosos
sin aislamiento dentro de la cubierta de la unidad. Estos
puntos pueden constituir un riesgo de descarga eléctrica.
Dit symbool geeft aan dat er binnen in het apparaat
ongeïsoleerde, gevaarlijke spanning aanwezig is die mogelijk
elektrische schokken kan veroorzaken.
El usuario debe consultar las instrucciones de funcionamiento y
mantenimiento (reparación) en la documentación que se
suministra con el aparato.
De gebruiker dient de bedienings- en onderhoudsvoorschriften
te raadplegen in de documentatie die werd meegeleverd met
het apparaat.
Atención: la instalación la debe realizar únicamente personal
cualificado de conformidad con el National Electric Code o las
normas aplicables en su país.
Attentie: het apparaat mag alleen door gekwalificeerd personeel
worden geïnstalleerd. De installatie dient in overeenstemming
met de nationale elektrische richtlijnen of de van toepassing
zijnde lokale richtlijnen te worden uitgevoerd.
Desconexión de la alimentación. Las unidades con o sin
interruptores de encendido/apagado reciben alimentación
eléctrica siempre que el cable de alimentación esté conectado a
la fuente de alimentación. Sin embargo, la unidad sólo funciona
cuando el interruptor está en la posición de encendido. El cable
de alimentación es la principal fuente de desconexión de todas
las unidades.
Bosch Security Systems | 30 August 2004
Spanning uitschakelen. Apparatuur met of zonder
aan-uitschakelaar staat onder spanning zolang de stekker is
aangesloten op de wandcontactdoos. De apparatuur is uitsluitend
in werking als de aan-uitschakelaar aan staat. Het netsnoer is de
"hoofdschakelaar" voor alle apparatuur.
EN | 5
LTC 948x | Instruction Manual | Safety Precautions
Medidas de Segurança
CUIDADO: PARA REDUZIR O RISCO DE CHOQUE
ELÉCTRICO, NÃO RETIRE A TAMPA (OU A PARTE
POSTERIOR). NO INTERIOR, NÃO EXISTEM PEÇAS QUE
POSSAM SER REPARADAS PELO UTILIZADOR. REMETA A
ASSISTÊNCIA PARA OS TÉCNICOS QUALIFICADOS.
Este símbolo indica a presença de "tensão perigosa" não isolada
dentro da estrutura do produto, o que pode constituir risco de
choque eléctrico.
O utilizador deve consultar as instruções de funcionamento
e manutenção (assistência) nos documentos que
acompanham o aparelho.
Atenção: a instalação deve ser executada apenas por técnicos
qualificados da assistência, de acordo com o código eléctrico
nacional ou os códigos locais aplicáveis.
Corte de corrente. As unidades com ou sem interruptores
ON-OFF (ligar/desligar) recebem corrente sempre que o fio de
alimentação está introduzido na fonte de alimentação; contudo, a
unidade apenas está operacional quando o interruptor ON-OFF
está na posição ON. O fio de alimentação destina-se a desligar a
corrente em todas as unidades.
Bosch Security Systems | 30 August 2004
Sicurezza
ATTENZIONE: PER RIDURRE IL RISCHIO DI SCOSSE
ELETTRICHE NON RIMUOVERE LA COPERTURA (O IL
PANNELLO POSTERIORE). L'UNITÀ NON CONTIENE
COMPONENTI INTERNI RIPARABILI DALL'UTENTE. PER
QUALSIASI INTERVENTO, RIVOLGERSI A PERSONALE
TECNICO QUALIFICATO.
Questo simbolo indica la presenza di "tensione pericolosa" non
isolata all'interno del contenitore del prodotto. Ciò comporta un
potenziale rischio di scosse elettriche.
Si consiglia di consultare le istruzioni operative e di
manutenzione (interventi tecnici) contenute nella
documentazione fornita con il dispositivo.
Attenzione: l'installazione deve essere effettuata esclusivamente
da personale tecnico qualificato in conformità con il National
Electrical Code o con le normative locali vigenti.
Scollegamento dell'alimentazione. Le unità dotate o sprovviste di
interruttori ON-OFF vengono alimentate quando si inserisce il
cavo nella presa dell'alimentazione. L'unità è tuttavia in funzione
solo quando l'interruttore ON-OFF si trova nella posizione ON. Il
cavo di alimentazione costituisce il dispositivo di scollegamento
dell'alimentazione principale per tutte le unità.
LTC 948x Series | Instruction Manual | Contents
EN | 6
Table of Contents
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
1
UNPACKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.1
Sunshields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.2
Tamperproof Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.3
Heater Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3
SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
4
CARE AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
5
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
6
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
6.1
Model Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
6.2
Maximum Camera/Lens Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
6.3
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
6.4
Cable Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
6.5
Housing Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
6.6
Cover Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
6.7
Camera/Lens Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
6.8
Camera/Lens Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
6.9
Video Coax Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
6.10 Lens Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
6.11 Camera/Lens Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
6.12 Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
6.13 Fuse Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
7
EXPLODED VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
7.1
Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Bosch Security Systems | 30 August 2004
EN | 7
LTC 948x Series | Instruction Manual | Unpacking
1
UNPACKING
This mechanical should be unpacked and handled
carefully.
Check for the following items:
Housing (with correct model number)
Hardware Kit - LTC 9480 & LTC 9483 Series Models:
2
ACCESSORIES
2.1
Sunshields
Provide protection from the direct rays of sun and
promote cooling to reduce internal housing
temperatures. Strongly recommended for housing to be
used outdoors.
LTC 9083/01: For LTC 9483 Series Housings
Qty.
Item
1
1/4-20 x 3/8in. Button Head Screw
2
1/4-20 x 1/2in. Button Head Screw
2
1/4in. Spring Washers
1
5/16in. Flat Washer
2
Fittings, 3/8in. NPT
2.2
2
Rubber Plug, 1/2in. NPT
1
Nut, 3/8in. NPT
Contains tamper resistant screws and bit key to
tamperproof up to five housings.
2
Fittings, 1/2in. NPT
2
Nut, 1/2in. NPT
1
Spacer Block
Hardware Kit - LTC 9484 & LTC 9488 Series Models:
Qty.
Item
1
1/4-20 x 3/8in. Button Head Screw
3
1/4-20 x 1/2in. Button Head Screw
1
1/4-20 x 5/8in. Button Head Screw
1
1/4-20 x 3/4in. Button Head Screw
1
1/4-20 x 7/8in. Button Head Screw
2
1/4in. Spring Washers
1
5/16in. Flat Washer
2
Fittings, 3/8in. NPT
2
Rubber Plug, 1/2in. NPT
1
Rubber Plug, 3/8in. NPT
1
Nut, 3/8in NPT
2
Fittings, 1/2in. NPT
2
Nut, 1/2in. NPT
4
Spacer, 0.4mm
4
Spacer, 3.2mm
If an item appears to have been damaged in shipment,
replace it properly in its carton and notify the shipper.
If any items are missing, notify your Bosch Security
Systems Inc. Sales Representative or Customer Service.
The shipping carton is the safest container in which the
unit may be transported. Save it for possible future use.
Bosch Security Systems | 30 August 2004
LTC 9083/01S: For LTC 9480 Series Housings
LTC 9084/01: For LTC 9484 Series Housings
LTC 9088/01: For LTC 9488 Series Housings
Tamperproof Kit
LTC 9080/00: For all LTC 9480 Series Housings
2.3
Heater Kit
LTC 9480/20HTR: Heater Kit for LTC 9480 Housing
only
3
SERVICE
If the unit ever needs repair service, the customer
should contact the nearest Bosch Security Systems, Inc.
Service Center for return authorization and shipping
instructions.
Service Centers
USA
Phone:
800-366-2283 or 717-735-6638
fax:
800-366-1329 or 717-735-6639
CCTV Spare Parts
Phone:
800-894-5215 or 408-956-3853 or 3854
fax:
408-957-3198
e-mail:
BoschCCTVparts@ca.slr.com
Canada
Phone:
514-738-2434
Europe, Middle East & Asia Pacific Region
Phone:
32-1-440-0711
For additional information, see
www.boschsecuritysystems.com.
EN | 8
LTC 948x Series | Instruction Manual | Care and Maintenance
4
CARE AND MAINTENANCE
Regularly scheduled maintenance will help prolong the
operation life of this unit. Clean the viewing window
as needed with a mild, nonabrasive detergent in water
and a soft cloth.
5
DESCRIPTION
The LTC 948x Series Housings are smart, stylized
housings for indoor and outdoor use. These housings
meet customers demands for an attractive housing that
is both cost-competitive and easy to install. They are
available in multiple sizes to fit a wide range of
cameras and lenses.
Do Not Exceed 30VAC Input on 24VAC models.
Operation above 30VAC violates low voltage
operation (Class 2 Specifications). Normal operation is
24VAC.
TUV Approved 24VAC Models
CAUTION: Use an approved power supply
incorporating reinforced insulation from
primary to secondary to isolate unit from
Mains.
6.2
Maximum Camera/Lens Size
LTC 9480/00: 68 W x 54 H x 197 L mm (2.68 x 2.1 x 7.75in.)
LTC 9480/20: 68 W x 54 H x 197 L mm (2.68 x 2.1 x 7.75in.)1
LTC 9483/00: 68 W x 54 H x 267 L mm (2.68 x 2.1 x 10.5in.)
6
INSTALLATION
LTC 9483/20: 68 W x 54 H x 267 L mm (2.68 x 2.1 x 10.5in.)1
This installation should be made by a qualified service
person and conform to all local codes.
6.1
Preinstalled
Heater or
Heater/
Blower1
Voltage/
Power
V/W
LTC 9483/60: 68 W x 54 H x 267 L mm (2.68 x 2.1 x 10.5in.)1
LTC 9483/21: 68 W x 54 H x 216 L mm (2.68 x 2.1 x 8.5in.)2
Model Designation
Model No.
LTC 9483/50: 68 W x 54 H x 267 L mm (2.68 x 2.1 x 10.5in.)1
LTC 9483/51: 68 W x 54 H x 216 L mm (2.68 x 2.1 x 8.5in.)2
Use with Camera
Models with These
Voltage Ratings
LTC 9483/61: 68 W x 54 H x 216 L mm (2.68 x 2.1 x 8.5in.)2
LTC 9484/00: 71 W x 71 H x 279 L mm (2.8 x 2.8 x 11in.)
LTC 9484/20: 71 W x 71 H x 279 L mm (2.8 x 2.8 x 11in.)1
Indoor/Outdoor Units
LTC 9480/00 ---
---
24
LTC 9483/00 ---
---
24, 115, 230
LTC 9484/00 ---
---
24, 115, 230
LTC 9488/00 ---
---
24, 115, 230
LTC 9484/21: 71 W x 71 H x 229 L mm (2.8 x 2.8 x 9in.)2
LTC 9484/50: 71 W x 71 H x 279 L mm (2.8 x 2.8 x 11in.)1
LTC 9484/60: 71 W x 71 H x 279 L mm (2.8 x 2.8 x 11in.)1
LTC 9484/61: 71 W x 71 H x 229 L mm (2.8 x 2.8 x 9in.)2
LTC 9488/00: 71 W x 71 H x 356 L mm (2.8 x 2.8 x 14.0in.)
Outdoor Units
LTC 9480/20 Heater
24/15
24
LTC 9488/20: 71 W x 71 H x 356 L mm (2.8 x 2.8 x 14.0in.)1
LTC 9483/20 Heater
24/23
24
LTC 9488/50: 71 W x 71 H x 356 L mm (2.8 x 2.8 x 14.0in.)1
LTC 9483/21 Heater/Blower
24/25
24
LTC 9488/60: 71 W x 71 H x 356 L mm (2.8 x 2.8 x 14.0in.)1
LTC 9483/50 Heater
230/23
230
LTC 9488/21: 71 W x 71 H x 318 L mm (2.8 x 2.8 x 12.5in.)2
LTC 9483/60 Heater
115/23
115
LTC 9488/51: 71 W x 71 H x 318 L mm (2.8 x 2.8 x 12.5in.)2
LTC 9483/61 Heater/Blower
115/28
115
LTC 9488/61: 71 W x 71 H x 318 L mm (2.8 x 2.8 x 12.5in.)2
LTC 9484/20 Heater
24/23
24
LTC 9484/21 Heater/Blower
24/25
24
LTC 9484/50 Heater
230/23
230
LTC 9484/60 Heater
115/23
115
LTC 9484/61 Heater/Blower
115/28
115
LTC 9488/20 Heater
25/40
24
LTC 9488/21 Heater/Blower
24/42
24
LTC 9488/50 Heater
230/40
230
LTC 9488/60 Heater
115/40
115
LTC 9488/61 Heater/Blower
115/45
115
1
The heaters and blowers for all models operate at 50/60Hz.
1
With heater.
2
With heater and blower.
6.3 Tools Required
•
•
•
•
•
Small flat blade screwdriver
Phillips screwdriver (P2)
Adjustable wrench
Wire cutter/stripper/crimper tool
5/32in. (or 4mm) hex wrench
EN | 9
LTC 948x Series | Instruction Manual | Installation
6.4
Cable Requirements
Video Transmission (Coaxial)
Lens Control Cable
Cable Type
Jacketed Multiconductor Cable
Cable Size
Outside Diameter between 4.3mm
and 11.9mm (0.170in. and 0.470in.)
Cable Shape
Round
Shield
Overall shielding
Conductors
Stranded 20 to 16 AWG wire
Cable Type
RG-59/U (Runs < 300m (1000ft))
RG-11/U (Runs < 600m (2000ft))
Cable Size
Outside diameter between 4.6mm
and 7.9mm (0.181in. and 0.312in.)
Cable Shape
Round
Shield
≥ 93% Braided Copper Shield
No. of Conductors
4 and 8
Center Conductor
Stranded Copper Center
Conductor Insulation
Color coded
DC Resistance
≥ 15Ω/1000ft (RG-59/U)
≥ 6Ω/1000ft (RG-11/U)
Sources
Belden 9552
Belden 9554
Cable Impedence
75Ω
Agency Rating
UL
Environmental
Outdoor rated
Temperature Rating
≥ 80 °C (176 °F)
Sources
Belden 9259
Belden 9238
Input Power Cord - North American
Cable Type
SJTOW-A Rated
Cable Size
Outside diameter between 4.3mm
and 11.9mm (0.170in. and 0.470in.)
Cable Shape
Round
Conductors
3 conductor version and
2 conductor version
Agency Rating
UL/C.S.A., UL VW-1
Environmental
Outdoor rated
Temperature Rating
105 °C (221 °F)
Voltage Rating
300 V
Sources
Belden 19506
Belden 19509
Northwire 573939
6.5
Housing Mounting
1. Use the two 1/4-20 x 0.50in. screws and
1/4in. spring washers provided in the hardware
kit to mount the housing to a mount or a
pan/tilt. The spring washers must be used for
the screws to thread properly.
2. The outermost set of 1/4-20 threaded holes are
for mounting to feed-through mounts, and the
innermost 1/4-20 holes are for mounting to all
other mounts and pan/tilts.
6.6
1.
Cover Removal
Loosen the top two screws on the rear of the
housing. These screws are captive and will not
come out all the way. Do not remove the
bottom two screws. See FIGURE 1.
Loosen These Screws
Input Power Cord - European
Cable Type
H05RN-F3G0.75 and
H05RN-F3G1.00
Cable Size
Outside diameter between 4.3mm
and 11.9mm (0.170in. and 0.470in.)
Cable Shape
Round
Conductors
3 conductor version and
2 conductor version
Agency Rating
VDE
Environmental
Outdoor rated
Sources
Olflex 1600252
Olflex 1600253
Bosch Security Systems | 30 August 2004
Do Not Remove
FIGURE 1 Loosening the Captive Screws
EN | 10
LTC 948x Series | Instruction Manual | Installation
2.
Grasp the housing's front cap and pull
forward. Do not squeeze the cover itself. This
will make it difficult to slide off the cover. See
FIGURE 2.
Grasp Here
2.
Remove the camera bracket from the base. If
you are using the feed-through feature, refer
to Section 6.8.3 at this time.
Mounting fixed lens cameras in LTC 9480 Series,
LTC 9483 Series, LTC 9484 Series & LTC 9488 Series
Housings
3a. Attach the lens to the camera.
3b. Use the 1/4-20 x 3/8in. screw to mount the
camera to the camera bracket. The lens
should extend approximately 6mm (0.25in.)
from the front of the camera bracket. See
FIGURE 4.
FIGURE 2 Removing the Cover
Camera
3.
6.7
1.
The cover is attached to the base. Allow the
cover to dangle from the base.
Camera
Bracket
Camera/Lens Installation
Loosen the two screws holding the camera
bracket to the base. It is not necessary to
remove them completely. See FIGURE 3.
1/4-20 × 3/8 Screw
FIGURE 4 Attaching the Camera
Camera
Bracket
Loosen These
Screws
Figure 3 Removing the Camera Bracket
Bosch Security Systems | 30 August 2004
6.4mm
0.25in.
EN | 11
LTC 948x Series | Instruction Manual | Installation
6.8
Camera/Lens Wiring
WARNING: Use only the cables
specified under INSTALLATION, Cable
Requirements for wiring cameras
and lenses.
6.8.1
1.
Fittings
The two large 1/2in. NPT fittings accept
round cable with diameters from 4.3mm to
11.9mm (0.17in. and 0.47in.). The small
fittings will accept cables with diameters from
4.6mm to 7.9mm (0.181in. and 0.312in.).
Securely tighten all fittings to ensure a liquidtight seal. Failure to do so could allow water to
enter the housing and damage the camera and
lens.
6.8.3
Feed-through Wiring
These housings have the capability of having the
cabling feed through the foot of the housing. This
requires the use of feed-through mounts like the
LTC 9215/00, LTC 9215/00S, or LTC 9219/01.
1.
Prior to mounting the camera, remove the two
dome plugs located inside the housing. See
FIGURE 5.
Rear Cap
Remove These
Dome Plugs
1/2in.
Rubber Plugs
If a sealant will be used, be sure it is a neutral cure
type. Sealants that release acetic acid may harm
camera electronics.
Foot
Use of drip loops is recommended on the
wiring outside of the rear endcap.
3/8in. NPT
Fitting
FIGURE 5: Feed-through Wiring
6.8.2
Conduit
These housings are designed to allow conduit to be
directly connected.
1.
Remove the rear fittings and attach the
conduit and conduit fittings directly to the
housing rear cap. The holes accept 1/2in.
conduit fittings and PG 13.5 conduit fittings.
Any unused holes can be covered using the
plugs provided in the hardware kit.
2.
Screw the two 3/8in. NPT fittings into the foot
of the housing.
3.
Pull the cabling through the fittings and into
the housing. Tighten the fitting to 4.0 N.m to
4.5 N.m (35in.lb to 40in.lb). This torque rating
is approximately 1 to 1-1/2 turns past the
point where the fitting starts to grip the wire.
Failure to do so will result in water damage to
all electronic parts.
4.
Attach the foot to the top bracket of the
mount.
5.
Cover the holes in the rear cap with the
rubber plugs provided. Push in until flush,
and then release.
6.8.4
Power Connections
Power connection into the housings is to be supplied
through a minimum type UL Standard SJ cord
acceptable for outdoor use. Installation must conform
to acceptable NEC and local codes. For 24 volt
cameras, use the chart below for selecting the proper
wire size.
Bosch Security Systems | 30 August 2004
EN | 12
LTC 948x Series | Instruction Manual | Installation
Recommended Maximum Cable Lengths for Housings
Equipped with 24 Volt Cameras, Heaters, and Blowers.
Wire Size
Housing Distance
mm2
AWG
meters
feet
0.5
1
1.5
2.5
4
6
10
20
18
16
28.6
45.7
70.1
115.5
183.8
292.6
464.2
94
150
230
379
603
960
1523
14
12
10
8
NOTE: The use of wire sizes larger than 1.5mm2
(14AWG) will require a splice to accommodate the
terminal block.
1.
Install one of the large 1/2in. NPT fittings
into one of the holes in the rear cap. The
terminal block side is preferable. If using the
feed-through option, ignore this step.
2.
Route the power cable through the fitting in
the rear cap or one of the feed-through fittings
in the foot.
3.
4.
The terminal block provided on /x0 units
accepts wire ranging from 20 to 14AWG or
1.5mm2. The terminal block provided on
/x1 units accepts wire ranging from
18 to 12AWG or 2.5mm2. When using larger
wire sizes, splice to a smaller size wire at the
terminal block end. The splice may need to
be enclosed in a junction box if it does not
pass through the fittings.
A screw/terminal lug is provided for securing
a safety ground. To attach the safety
grounding wire (green 115 volt, green/yellow
230 volt), first unscrew the terminal lug and
strip and crimp the grounding wire into the
lug. Attach the terminal lug to the bracket
using the M4 x 10 screw provided
(LTC 9480/00 models use an M4 Nut to
screw the lug to the base). See FIGURE 6.
Screw
Neutral
Line
Terminal Lug
(LTC 9480/00 only)
M4 Nut (Use a
7mm wrench)
FIGURE 6 Power Connections - Non-fan Units
Ground
Terminal Lug
Neutral
Screw
Line
Fuse Holder
FIGURE 7 Power Connections - Fan Units
5.
Pull any excess wire out of the housing and
tighten the fitting to 8.5 N.m to 9.0 N.m
(75in.lb to 80in.lb). This torque rating is
approximately 1 to 1-1/2 turns past the point
where the fitting starts to grip the wire.
Failure to do so will allow water to enter and
damage all electronic parts.
Securely tighten all fittings to ensure a liquid-tight
seal. Failure to do so could allow water to enter the
housing and damage the camera and lens.
6.
Bosch Security Systems | 30 August 2004
Fuse Holder
Terminal
Lug
Ground
Connect the supply power wires to the
left-side or the top of the terminal block
provided. Strip no less than 6mm (0.25in.)
and no more than 8mm (0.31in.) of insulation
away from the wire. Do not nick the wires.
EN | 13
LTC 948x Series | Instruction Manual | Installation
7.
8.
6.9
Cut the camera power cord, leaving enough
cable to allow connection to the terminal
block. Strip no less than 6mm (0.25in.) and no
more than 8mm (0.31in.) of insulation away
from the wire. Do not to nick the wires.
Connect these wires to the left-hand side or
the top of the terminal block.
On heater and heater/blower units, make sure
the heater and fan wires remain connected to
the terminal block.
6.10
1.
Install the last 1/2in. NPT fitting into the
remaining hole in the rear cap. Zoom lenses can
only be installed into LTC 9484 and LTC 9488
housings.
2.
If installing a zoom lens, insert the lens control
cable through the last fitting at the rear of the
housing. Attach the lens wiring to the lens
mating connector and connect it to the lens. If
mating connector is not available, connect
directly to the lens cable. Pull any excess wire
out of the housing and tighten the fitting to
8.5 N.m to 9.0 N.m (75in.lb to 80in.lb). This
torque rating is approximately 1 to 1-1/2 turns
past the point where the fitting starts to grip the
wire. Failure to do so will result in water damage
to all electronic parts.
Video Coax Connection
WARNING: Use only the cables specified under
INSTALLATION, Cable Requirements for
wiring of the video coax connection.
1.
For LTC 9483 and LTC 9480 versions, install
a 1/2in. NPT fitting into the remaining hole in
the rear cap. For LTC 9484 and LTC 9488
versions, install a 3/8in. NPT fitting through
the center small hole of the rear cap.
2.
Route the video coax cable through one of the
fittings installed in step 1 or one of the feedthrough fittings in the base.
3.
Attach the BNC connector to the coax and
connect it to the camera. Pull any excess wire
out of the housing and tighten the fitting to
8.5 N.m to 9.0 N.m (75in.lb to 80in.lb). This
torque rating is approximately 1 to 1-1/2 turns
past the point where the fitting starts to grip
the wire. Failure to do so will result in water
damage to all electronic parts.
Securely tighten all fittings to ensure a
liquid-tight seal. Failure to do so could
allow water to enter the housing and
damage the camera and lens.
Use of drip loops is recommended on the wiring outside
of the rear end cap.
NOTE: See the specification on the lens cord for the
correct plug connection.
Securely tighten all fittings to ensure a
liquid-tight seal. Failure to do so could allow
water to enter the housing and damage the
camera and lens.
3.
If using a pan/tilt with a feed-through cable,
insert the camera/lens function cable in through
the left-hand fitting at the rear of the cradle. Wire
the functions as described above or as needed.
Use of drip loops is recommended on the wiring
outside of the rear end cap.
6.11
Camera/Lens Adjustment
Verify camera and lens operation before final assembly of
the cradle into the housing. Adjust the camera focus and
iris as necessary. See individual camera instructions.
6.12
Bosch Security Systems | 30 August 2004
Lens Wiring
WARNING: Use only the cables specified under
INSTALLATION, Cable Requirements for
wiring the lens.
Final Assembly
1.
Use the plugs or fittings provided to plug any
remaining holes in the rear cap.
2.
Reinstall the cover. Align the bottom of the
cover ribs with the top of the base. Slide the
cover onto the base. Make sure the seal is not
folded over or torn. Use silicone grease to
lubricate the seals if necessary. See FIGURE 8.
LTC 948x Series | Instruction Manual | Exploded View
See Detail
Cover Rib
Seal
Top of Base
FIGURE 8 Reinstalling the Cover
3.
As the cover nears the rear cap, make sure the
captive screws in the back are not blocking the
cover from engaging into the rear cap.
4.
Screw the two rear captive screws into the
housing.
6.13
Fuse Replacement
1.
To replace a fuse, with a flat blade screwdriver
and twist the top of the fuse holder
counterclockwise about a quarter of a turn.
The fuse is spring-loaded so it will eject.
2.
Replace the fuse with a fuse that has the same
current rating. The fuse is a 5x20mm slow blow
cartridge type fuse. Littelfuse Series 218 is
recommended.
Bosch Security Systems | 30 August 2004
EN | 14
EN | 15
LTC 948x Series | Instruction Manual | Exploded View
7
EXPLODED VIEW
4
6
5
8
1
3
7
9
2
FIGURE 9
7.1
PARTS LIST
Ref No.
Drawing Number
Part Description
1
LTC 9480/20HTR
24VAC Heater Kit (LTC 9480 Models)
1
315 3369 020
24VAC Heater Kit (LTC 9483, LTC 9484)
1
315 3369 050
230VAC Heater Kit (LTC 9483, LTC 9484)
1
315 3369 060
115VAC Heater Kit (LTC 9483, LTC 9484)
1
315 3368 020
24VAC Heater Kit (LTC 9488)
1
315 3368 050
230VAC Heater Kit (LTC 9488)
1
315 3368 060
115VAC Heater Kit (LTC 9488)
2
315 3142 001
Camera Bracket Kit (LTC 9483)
2
315 3142 002
Camera Bracket Kit (LTC 9488)
2
315 3142 003
Camera Bracket Kit (LTC 9484)
3
315 3143 001
Foot Kit
4
315 3144 020
24VAC Fan Kit
4
315 3144 050
230VAC Fan Kit
4
315 3144 060
115VAC Fan Kit
5
315 3145 001
Wiring Bracket Kit
6
315 3146 001
Rearcap Kit for LTC 9483 Models
6
315 3146 003
Rearcap Kit for LTC 9484, LTC 9488 Models
7
315 3147 001
Base Kit for LTC 9480 Models
7
315 3147 002
Base Kit for LTC 9483 Models
7
315 3147 003
Base Kit for LTC 9488 Models
7
315 3147 004
Base Kit for LTC 9484 Models
8
315 3148 001
Cover Kit for LTC 9480 Models
8
315 3148 002
Cover Kit for LTC 9483 Models
8
315 3148 003
Cover Kit for LTC 9488 Models
8
315 3148 004
Cover Kit for LTC 9484 Models
9
315 3149 001
Frontcap Kit for LTC 9483 Models
9
315 3149 003
Frontcap Kit for LTC 9484, LTC 9488 Models
-
315 3062 001
Hardware Kit for LTC 9483 Models
-
315 3062 003
Hardware Kit for LTC 9484, LTC 9488 Models
Bosch Security Systems | 30 August 2004
-
Bosch Security Systems, Inc.
850 Greenfield Road
Lancaster, PA 17601 USA
Tel: 800-326-3270
Fax: 1-717-735-6560
www.boschsecuritysystems.com
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven
The Netherlands
Tele +31 40 27 80000
© 2004 Bosch Security Systems GmbH
3935 890 17815 04-36 | August 30, 2004 | Data subject to change without notice.
Bosch Security Systems Pte Ltd.
38C Jalan Pemimpin
Singapore 577180
Republic of Singapore
Tel: 65 (6) 319 3486
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising