Untitled - ekotec sistemi srl
Vision Solutions for Oil & Gas
with drillereye you fly
watch video
http://youtu.be/PVFfya3fDiY
What we do
Drillereye designs, produces and installs video
surveillance systems for land and off-shore RIGS. Our
solutions guarantee operators easier, safer and faster
management of their activities, thanks to constant
monitoring of all areas of the drilling plant.
Our solutions can be installed
quickly either on newly-built
RIGs or on existing ones, even
during refurbishment.
We provide assistance and
support 24/7.
who we are
Drillereye is the Oil & Gas division of EKOTEC Sistemi S.r.l,
a leading company in industrial automation, security and
safety as well as integrated control systems since 1980.
EKOTEC Sistemi is a system integrator and
has always supplied customized and turnkey
solutions, from design right up to the final
system startup, in lots of industrial applications.
This consolidated experience has led to
DRILLEREYE creation, the division which
develops CCTV systems capable to operate
in all kinds of environments and in all
the conditions.
DRILLEREYE looks after systems design and
production phases:
» Feasibility studies
» Design
» Construction
» Installation
We offer CCTV systems working STAND ALONE (ATEX
cameras, control panel and monitor) or integrated into
RIG control systems, to guarantee the safety, security
and profitability of the drilling RIG everywhere and in all
the conditions, even the worst ones.
Drillereye is a brand
KEYVALUES
Five reasons to choose DRILLEREYE
Experience
Reliability
Our solutions have been installed on land and off-shore RIGs. The experience
gained in the field has enabled us to optimise our systems, to guarantee
continuous operations in difficult environments and in critical conditions. Our
systems are tested to withstand extreme temperatures and the harsh mechanical
stresses typical of drilling.
We provide stand-alone and integrated systems which are also anti-explosive
and anti-vibration. Thanks to our systems, we can monitor the core centres of
the RIG and all the other workplaces on the same in which operator safety has
precedence, like for example:
» BOP area
» Driller floor
» Racking board
» Shaker
It is the basic requirement of each part of the drilling RIGs to avoid any downtime.
Guided by this priority, our R&D team puts the reliability at the centre of the
design process.
We select the best components on the market and we assemble them by our
technicians support. Thanks to our know-how, we have developed original
solutions to equip our cameras with effective anti-vibration systems. Each system
is submitted to strict performance tests in laboratories before delivery,
to guarantee reliability even in extreme conditions.
Quick installation
We are fully aware that assembly and dismantling the Rig is a critical and nonproductive operation, to be carried out rapidly. We deliver our systems ready
for operation: just to position the devices, to insert the connection plugs and to
power on the system. Our connection cables and electrical panels are
plug-&-play, and our components allow for quick use by all operators. The
software developed by Drillereye is extremely user-friendly, to reduce operator
learning times as much as possible.
Our solutions are quickly applicable even to existing RIGs.
The systems can be controlled and set also through our tele-management
service, active 24/7.
Delivery on time
To be on time in terms of delivery time is an essential condition in a market in
which the return on investment (ROI) is a mark of success. DRILLEREYE always
works in compliance with the agreed schedules and the allocated budget. We
deliver turnkey systems, ready to be used in the installation sites within the
established time frame.
TAYLOR MADE
The integrated Drillereye control system is designed to be fit to our clients,
to meet their specific surveillance needs. Our systems are compliant with the
required legislative and technical standards. Thanks to the user-friendliness of
our systems, one single operator in the cabin can view the function of the entire
drilling plant and control the cameras through clear and immediate commands.
Drillereye solutions guarantee excellent operating results and a remarkable
increase in economic sustainability, for RIGs of different kinds and sizes.
SOLUTIONS
The modular solution DRILLEREYE meets
drillers’ different requirements, according
to the type of RIG and to the operating
environment.
All components, chosen from the best in
the market, can be combined and perfectly
integrated into DRILLEREYE’s management
system. We offer a wide assortment of devices,
operating in an extensive temperature range
(from -40°C to 55°): fixed cameras, zoom
cameras, PTZ camera, control panel, HMI and
cabling & connection systems, both for Ex and
safe areas.
All DIRLLEREYE solutions are available in stand
alone mode or fully integrated in the RIG
control system, offering perfect integration
between complementary systems.
P.T.Z. – PAN TILT
AND ZOOM ATEX
racking board AREA
DOG HOUSE
FIXED CAMERA WITH
ZOOM ATEX
MUD PUMPS Area
P.T.Z. – PAN TILT
AND ZOOM ATEX
draw work
driller cabin
ATEX STAND ALONE HMI
fixed camera
atex
shaker area
P.T.Z. – PAN TILT
AND ZOOM ATEX
b.o.p. area
SYSTEM EQUIPMENT
SYSTEM EQUIPMENT
CCTV CAMERAS
CONNECTIONS
P.T.Z. – PAN TILT AND ZOOM ATEX
FIXED CAMERA WITH ZOOM ATEX
CABLES WITH ELECTRICAL
TERMINAL BLOCK
CABLES WITH PLUGS
Day/night PTZ camera contained in explosionproof IP 65 housing (electro polished AISI 316L
stainless steel) with 36X optical motorized
zoom, autofocus and wiper. Assembled with
mounting bracket, shock absorbers and J-Box
for cable connections. ATEX certified for Zone
1 and 2. Optionally plugs for easier and faster
electrical connections can be supplied.
Day/night fixed camera contained in explosion
proof IP66 housing (electro polished AISI 316L
stainless steel) with optical motorized zoom,
autofocus and wiper. Assembled with mounting
bracket, 3mt of cable tail and J-Box for cable
connections. ATEX certified for Zone 1 and 2.
Optionally plugs for easier and faster electrical
connections can be supplied.
Set of unarmored cables for field’s camera
connections. It includes cables for electrical
feeding, video signal and RS485 bus connection
(when required). All of these are oil resistant
and flame retardant. Cables are suited to be
linked directly at electrical terminal block. As
option, cables can be supplied Armoured Type
and/or MUD resistant Type.
Set of unarmored cables for field’s camera
connections. It includes cables for electrical
feeding, video signal and RS485 bus connection
(when required). All of these are oil resistant
and flame retardant. Cables are supplied
with preinstalled Amphe-EX plugs for faster
electrical connections. As option, cables can be
supplied Armoured Type and/or MUD resistant
Type.
FIXED CAMERA ATEX
FIXED CAMERA WITH ZOOM
HOT ENVIRONMENTS
WIRELESS SYSTEM FOR CAMERA
CONNECTIONS
OPTICAL CABLE
Color fixed compact camera contained in
explosion proof IP68 housing (electro polished
AISI 316L stainless steel) with fixed optic, angle
81°. Assembled with mounting bracket and
J-Box for cable connections. ATEX certified
for Zone 1 and 2. Optionally whit plugs for
easier and faster electrical connections can be
supplied.
Day/night fixed camera contained in IP66
cooled housing, with optical motorized
zoom, autofocus. Assembled with mounting
bracket. 3mt of cable tail and J-Box for cable
connections. Only for safe areas. For outdoor
temperatures between -40° to 158°F (-40°C
to 70°C) Optionally plugs for easier and faster
electrical connections can be supplied.
As alternative to cable’ connections, a Wi-Fi
communication system can be supplied. The
wireless set includes the 802.11g Access Point
(IP65), antennas and connections cables. In
this case the camera’s electrical feeding must
be supplied on site, not from the main CCTV
control cabinet. ATEX version and/or Amphe-EX
plugs as option.
As alternative to video’s cable connections an
Optical fibers communication system can be
supplied. The optical set includes armoured
optical cables (oil resistant, flame resistant,
NEK606 compliant), Amphe-EX connectors and
optical devices. Camera’s electrical feeding
can be supplied on site or from the main CCTV
control cabinet.
SYSTEM EQUIPMENT
SYSTEM EQUIPMENT
CABINETS
VISUALISATION
STANDARD CABINET IP65
ATEX EX D CABINET
ATEX STAND ALONE HMI
IP65 STAND ALONE HMI
Control panel (IP65 – AISI304) for feeding and
managing the CCTV system. The cabinet is
equipped with general breaker, protection
switches for devices, DC power supply, video
encoders. Supplied with terminal block for all
cables connections.
Control panel (EX d – Aluminium alloy) for
feeding and managing the CCTV system. The
cabinet is equipped with general breaker,
protection switches for devices, DC power
supply, video encoders. Supplied with terminal
block for all cables connections.
[OPTIONS]
Preinstalled Amphe-EX plugs
Video managing and recording system
Rig’s SCADA system integration.
[OPTIONS]
Preinstalled Amphe-EX plugs
Video managing and recording system
Rig’s SCADA system integration.
Our CCTV System provides the remote
monitoring of the Rig’s operation through
a surveillance monitor (HMI) installed into
driller cabin. Moreover, the driller could
display images coming from cameras, control
PTZ functions and, also, display the recorded
images, stored on HMI, and navigate between
them.
Suited for installations with a maximum of 4
cameras.
For pressurized driller’s cabin, we provide a
remote HMI for monitoring the Rig’s operation
which works as a client of the video-recording
server. Moreover, the driller could display
images coming from cameras, control PTZ
functions and, also, display the recorded
images, stored on the server, and navigate
between them.
OFF SHORE CABINET
VIDEO MANAGING
AND RECORDING SYSTEM
RIG’S SCADA SYSTEM
INTEGRATION
REMOTE WEB CLIENT
Control panel (IP65 – AISI316 marine use) for
feeding and managing the CCTV system. The
cabinet is equipped with general breaker,
protection switches for devices, DC power
supply, video encoders. Supplied with
terminal block for all cables connections. All
components are suited for marine/off-shore
use.
To implement a fully video-recording functions’,
the main control panel can be supplied with
an installed Industrial PC’ (without monitor)
and specific CCTV software’, that performs the
images recording’ and permits remote access
directly to the CCTV system, from outside, by
web. Recommended for systems with more of
4 cameras, or with Rig’s SCADA integration.
To optimize RIG’s operation we offer a solution
for fully integration between CCTV System
and RIG’s SCADA System. It manages all PTZ
trough a PLC which is linked, together with
Video encoders, to Rig’s SCADA system by LAN.
Specific pages are setted on the SCADA, to
display live images and moving PTZ. Recorded
images can be displayed by browsing the
video-recording client.
If the video managing and recording system is
installed and linked to a network, or a router,
the entire CCTV system can be monitored
everywhere, easily, through a standard PC or
by tablet. With the web client, remote offices
can display images coming from cameras, can
control PTZ functions and, also, display the
recorded images and navigate between them.
[OPTIONS]
Video managing and recording system
Rig’s SCADA system integration.
email info@drillereye.com
ph
++39 0521 480840
site www.drillereye.com
Via Strasburgo, 35
43123 PARMA - Italy
www.drillereye.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising