Endoacustica Europe Catalogue
Endoacustica Europe Catalogue
DEAR CUSTOMERS
Endoacustica Europe Team is proud to present the latest product catalog. It has both:
our new hi-tech developments and the popular time-proved products along with the
necessary descriptions and specifications. In this catalog you will find all the information
needed to get a clear idea of our product-line and services. Should you need any further
information, please do not hesitate to contact us.
Our products are designed in accordance with the requests of professionals working in
anti-terrorist organizations. We thank all our customers for cooperation and advices on
the quality of our products. We are always glad to receive your comments and reviews of
our security equipment which allows us to modify and improve the existing products and
create new ones in accordance with your requirements.
Special thanks to our partners and customers who placed individual orders for exclusive
equipment. Such projects require thorough scientific research and serious tests, but at
the same time help the creation of new efficient products.
We hope that our products and services meet your utmost requirements and help you in
the fight against crime and terrorism.
With best regards,
Endoacustica Europe Team
2
Endoacustica Europe
Catalogue
CONTENTS
AUDIO MONITORING ...................................................................................................... 4
Digital Radio Links ............................................................................................................... 4
OEM Audio Transmitters .................................................................................................... 16
Analog Audio Transmitters ................................................................................................ 18
Wearable Audio Transmitters ............................................................................................ 24
RC Analog Audio Transmitters ........................................................................................... 27
Telephone Line Transmitters ............................................................................................. 29
Combined Area Acoustics, Telephone Monitoring ............................................................. 31
Receivers ............................................................................................................................ 33
Repeaters ........................................................................................................................... 35
Directional Microphones ..................................................................................................... 37
Wire Systems for Audio Monitoring ................................................................................... 38
Stethoscopes ...................................................................................................................... 46
VIDEO MONITORING..................................................................................................... 48
Video Transmitters ............................................................................................................. 48
Video Receivers .................................................................................................................. 51
Video Systems ................................................................................................................... 53
Video Cameras and Lenses ................................................................................................ 63
Video Recorders ................................................................................................................. 69
Video Concealment Systems ............................................................................................. 73
Date/Time Generators ....................................................................................................... 74
Pan-Tilt Mechanisms .......................................................................................................... 75
RC RADIOLINKS ............................................................................................................. 76
RC Transmitters ................................................................................................................. 76
RC Systems ........................................................................................................................ 78
RC Receivers ...................................................................................................................... 80
AUDIO RECORDERS ....................................................................................................... 82
Digital Voice Recorders ...................................................................................................... 82
RADIOS AND ACCESSORIES ........................................................................................ 85
Radios................................................................................................................................. 85
Accessories......................................................................................................................... 87
TRACKING SYSTEMS ..................................................................................................... 90
Tracking Systems............................................................................................................... 90
LEAK DETECTION SYSTEMS ......................................................................................... 92
Multiobjects Leak Detectors............................................................................................... 92
Nonlinear Locator ............................................................................................................... 95
CONTACTS ....................................................................................................................... 97
3
AUDIO MONITORING
Endoacustica Europe
Catalogue
AURORA
Buffer & Burst Audio Transmission System with RC
The product is rated for transmission of audio intelligence via radio channel.
The system is based on step-by step accumulation of audio data in the internal RAM of
the transmitter followed by rapid rate packet RF transmission of the stored data in the
air.
Receiver unit of the system provides the reverse procedure: reception of data packets error correction - packet merging - digital-to-analog conversion.
Features:
- Low On-Air time. Hard to detect the transmitter with special locators;
- Impossible to intercept and decode the signal;
- High quality audio;
- Low power consumption;
Control over the output power of the transmitter and mode selection (sampling rate of
the analog-digital converter, duration and packet reoccurrence interval) are provided by
application of special Remote Control panel.
Complete set:
1. RMI 400 transmitter.
2. PRI 400 receiver.
3. DPK 010 remote control.
RMI 400 transmitter
PRI 400 receiver
DPK 010 remote control
The Transmitter is produced in metal housing and is equipped with inputs for external
power supply, antennas (data channel and RC signal receiver), and external microphone.
The Receiver unit is equipped with earphones, line out, recorder control sockets and
transmitter/receiver battery low indication.
SPECIFICATIONS:
GENERAL
Frequency range at sampling rates
0.3 – 3.4/5/7/9 kHz
8/11/16/22 kHz
Dynamic range of input acoustic channel
No less 85 dB
Packet duration (RC selectable)
30 - 250 milliseconds
Packet reoccurrence interval
1.2 – 26 seconds
(RC selectable)
Range of operation in open areas
500 m
AUDIO MONITORING
Digital Radio Links
TRANSMITTER
Carrier frequency of the data channel
800 – 1200 MHz
(factory preset)
Output power
350/50 mW
Modulation
GMSK
Spectrum width (-20 dB)
No more 12 MHz
Power supply voltage
3.6 – 4.6 V
Current consumption:
- standby/storage/packet transmission
No more 0.25/15/400 mA
Sensitivity of the RC receiver
No less 2 μV
Case dimensions
137 x 30 x 10 mm
RECEIVER
Sensitivity
No less 10 μV
Power supply
4 x AA or external power supply
Current consumption
No more 180 mA
Case dimensions
170 x 70 x 35 mm
REMOTE CONTROL
Output power
No less 600 mW
Modulation
AT
Carrier frequency
434 MHz
Power supply
6 V (4 x AAA)
Case dimensions
100 x 51 x 18 mm
5
AUDIO MONITORING
Digital Radio Links
STAGE
Digital Stereo Link with Remote Control
The product is rated for high quality transmission of stereo audio via a secured digital
radio link.
The product applies an algorithm of AD conversion, compression and transmission of the
data having a frame structure, that provides considerable improvement of the received
signal quality, volume range expansion and noise stability enhancement of the radio link.
Flexible structure of the system allows simultaneous transmission of two independent
audio signals (stereo) through one link providing high inter-channel separation and
battery state monitoring.
Using the Remote Control you can toggle between stereo/mono modes with simultaneous
double expansion of audio response. Application of frequency synthesizer simplifies
selection of transmission frequencies. Step control of the transmitter output power is also
available with the use of the Remote Control transmitter.
Complete set:
1. RMD 200S transmitter.
2. PRK 045S receiver.
3. DPK 003S remote control.
RMD 200S transmitter
PRK 045S receiver
DPK 003S
Remote control
The Transmitter is produced in metal housing and is equipped with inputs for external
power supply, antennas (data channel and RC signal receiver), and external microphone.
The Receiver unit is equipped with earphones, line out, recorder control sockets.
SPECIFICATIONS:
TRANSMITTER
416.5 – 423.5 MHz
Frequency
No more 83 dB
Dynamic range of signals on the
microphone input
Frequency response on the microphone
input:
- Stereo mode (2 channels)
0.3 – 3.8 kHz
- Mono mode (1 channel)
0.3 – 7.6 kHz
Modulation
GMSK
Sensitivity of the RC receiver
No less 0,5 μV
6
AUDIO MONITORING
Digital Radio Links
Power supply voltage
Output power (at 3.6 V)
Current consumption (at 3.6 V)
Case dimensions
Frequency
Power supply
Sensitivity
Current consumption
Case dimensions
Frequency
Output power
Case dimensions
3-5V
20/100 mW
50/110 mA
72 x 24.5 x 7 mm
RECEIVER
416.5 – 423.5 MHz
4 x AA
No less 1 μV
200 mA
127 x 106 x 27 mm
REMOTE CONTROL
150 - 152 MHz
No less 300 mW
100 x 51 x 18 mm
7
AUDIO MONITORING
Digital Radio Links
SPIKE
High-Quality Digital Radio Link
The product is used for high quality encrypted digital audio mono transmission.
The product applies PCM 16-bit algorithm for AD conversion, compression and
transmission of audio-data with frame structure that provides a significant increase of
quality of the received signal, dynamic range expansion and noise immunity
improvement of the radio link.
Complete set:
1. RMD 300 transmitter.
2. PRK 045 receiver.
RMD 300 transmitter
PRK 045 receiver
The carrier frequency of the transmitter is crystal controlled. The product has a smallsize metal case. Transmitted audio is received with the use of PRK045 ENDOACUSTICA
EUROPE special receiver.
Transmitter is equipped with external antenna, microphone, and power supply container.
No Power switch. The transmitter is switched On as soon as batteries are installed in the
power supply container. Optionally the transmitter can be completed with remote control
link (incl. KDK 003 RC receiver and DPK 003 RC transmitter). The transmitter keeps
operating even if the voltage drops down to 2.2 V along with the appropriate decrease of
its output power.
PRK 045 SH audio receiver is equipped with reception channel selector, volume control,
indication of the received signal level and the battery state, external antenna connector,
earphones output, rec. output.
SPECIFICATIONS:
Frequency range
Dynamic range
(microphone input)
Audio response
(microphone input)
Modulation
Channel rate
Output power:
- at 3.0 V
- at 6.0 V
Range of operation in the field
(at 3.0V)
Supply voltage
TRANSMITTER
416.5 – 423.5 MHz
No more 83 dB
0.2 - 14 kHz
GMSK
1.25 MBit/sec.
5 mW
20 mW
No less 200 m
2.2 – 6.5 V
8
AUDIO MONITORING
Digital Radio Links
Current consumption:
- at 3.0 V
- at 6.0 V
Dimensions
Frequency range
Sensitivity
Reception channels
Current consumption
Power supply
Dimensions
No more 10 mA
No more 20 mA
30.5 x 9.5 x 4.7 mm
RECEIVER
416.5 – 423.5 MHz
No less 3 µV
16
No more 150 mA
4 x AA 1.5 V
127 x 106 x 27 mm
9
AUDIO MONITORING
Digital Radio Links
GRASSHOPPER
Digital Audio Transmission System
The product is rated for transmission of audio intelligence via radio channel.
System operation is based on conversion of analog audio signal into a digital sequence
which is transmitted via the radio channel. Special receiver provides reception and
reverse conversion of the transmitted digital sequence into the analog audio signal.
Analog-digital conversion is based on the principle of adaptive-delta modulation (ADM).
Features:
- Compact size;
- Digital encryption (Adaptive "delta-modulation" ADM);
- High output power;
- Audio compressor;
- Dynamic range over 76 dB;
- High quality audio.
Complete set:
1. RMD 100 transmitter.
2. ICOM IC-R5 receiver.
RMD 100 transmitter
ICOM IC-R5 receiver
The intelligence transmitter looks like a compact digital crystal controlled audio
transmitter designed in a milled metal case. The external microphone is also designed in
a metal case.
Intelligence receiver is based on ICOM IC-R5 scanning receiver completed with the builtin decoder unit. The receiver automatically recognizes and demodulates the digital signal
transmitted by RMD 100.
According to the request of the customer the system can be completed with
ENDOACUSTICA EUROPE KDK 003 external remote control receiver and ENDOACUSTICA
EUROPE DPK 003 remote control panel.
Products with reduced current consumption and reduced output power are available.
AUDIO MONITORING
Digital Radio Links
SPECIFICATIONS:
TRANSMITTER
Frequency band
416.5 – 423.5 MHz
Modulation
GMSK
Current consumption
no more 110 mA
(at 3.6 V DC power supply)
Output power at 3.6 V DC power supply
no less 100 mW
Power supply voltage
2.7 – 4.5 V
Dimensions
45 x 18 x 7 mm
RECEIVER
Type of the received signal
WFM, GMSK
Sensitivity
1.5 μV
Current drain at an average volume
150 mA
Power supply
2 x 1.2 V rechargeable batteries, size АА
2 x 1.5 V alkaline batteries, size АА
11
AUDIO MONITORING
Digital Radio Links
FLASH
Remotely Operated Digital Recording-Transmitting System
The system is rated for recording of audio intelligence and rapid transmission of recorded
data via radio channel to the Remote Control receiver. The system is also applicable for
real-time transmission of audio intelligence.
Features:
- Programmed recording - provides automatic operation of the system with no human
assistance(duration, start/stop time are user-programmed;
- NO-noise operation - no noise is generated by the system while recording;
- Density histogram generated while recording indicates information density of the
recorded contents;
- 24-hour service - provides access to the intelligence (recorded or live) at any moment
you find comfortable;
- Boosted transmission of the recorded contents provides shortened communication
sessions;
- Partial or complete transmission of the recorded contents;
- Playback and Save functions allow to playback the transmitted intelligence with the use
of the control station and to save it (as *.wav files) to your PC through the USB interface.
- Communication Error Resolution - communication errors are resolved automatically by
multiple data requests;
Complete set:
1. Covert transmitter/recorder.
2. Control station (combined control, receiver and monitor unit).
3. Data transfer & convert Software.
Covert transmitter/recorder and Remote Control station
FLASH acoustic transmitter is programmed from the RC. Recording can be scheduled.
Date, time and length are user-defined.
Histogram of the record is formed during recording. It can be downloaded for analysis
separately from the audio data. Histogram is used to define the period of acoustic activity
in the monitored area. The periods of acoustic activity defined in the histogram can be
downloaded as fragments (there is no need to download all stored audio data).
12
AUDIO MONITORING
Digital Radio Links
Recorded data is downloaded from the FLASH acoustic transmitter to the RC on high
speed. Possible errors during the download process can be fixed by re-downloading the
data.
Playback function is available on RC unit. RC unit is connected to computer via USB
cable.
Computer software included in the FLASH package converts stored data to WAV format.
RC unit is equipped with LED display, numeric keyboard, power on/off button, external
antenna inputs (receiving and transmitting), headphones output, power supply input,
USB socket.
Covert transmitter is controlled with RC unit via interface menu system. Covert
transmitter itself has no control buttons and is operated only with RC station.
SPECIFICATIONS:
SYSTEM
10 kHz
10 bit
0.3 - 4.5 kHz
14 hours
2.5 Mbit/sec.
ADC sampling rate
ADC width
Audio response
Maximal time of recording
Data Transmission rate
(Covert transmitter - Control station)
Time of transmission of 1 hour of the
4.5 min.
recorded contents in no-error environment
COVERT TRANSMITTER
Main frequency
1200 MHz
Output power (standard)
80 mW
Modulation
FSK
Frequency deviation
+/- 3 MHz
Supply voltage
10 - 14 V
Current consumption:
- stand-by and record mode
15 mA
- data transmission mode
120 mA
RC Receiver sensitivity
-95 dBm
CONTROL STATION
Supply voltage
9-18 V
Current consumption while data reception
300 mA
mode
Current consumption in other modes
100 mA
Output power of the RC transmitter
500 mW
Modulation
OOK
Carrier frequency
916.5 MHz
13
AUDIO MONITORING
Digital Radio Links
RMS 001
Programmable Universal Audio Transmitter
Programmable universal audio transmitter with channel-select function and output power
control is rated for transmission of audio intelligence via radio channel.
The product designed as an OEM PCB with external microphone, antenna, connector for
external power-supply, RC receiver or programmer.
The RMS 001 Transmitter module is designed as a universal module rated for
camouflaged operation and hidden installation.
Features:
Programmable parameters from PC:
- Operating frequency for each of 16 channels (25 kHz step);
- Output power level (2 levels – Hi/Low);
- If supply voltage is decreased (below the user’s settings) the RMS 001 transmits a tone
signal in audio channel.
Transmitter
Programmer
If RMS 001 is connected to RC receiver, the functions programmed from RC are:
- Channel select (one of 16);
- Output power level select (2 levels – Hi/Low).
Firmware interface
14
AUDIO MONITORING
Digital Radio Links
SPECIFICATIONS:
Operating frequency
Frequency tuning interval
Frequency stabilization
Relative frequency instability in range of
operating temperatures
(if Supply V. = 3 – 4.5 V)
Modulation
Supply voltage
Current consumption
(if Supply V. = 3.6 V,
Load Resistance. = 50 Ohm,
SWR no more 1.2):
- Hi power
- Low power
Output power
(if Supply V. = 3.6 V,
Load Resistance. = 50 Ohm,
SWR no more 1.2):
- Hi
- Low
Working temperature range
Dimensions (excluding antenna and
microphone)
417 – 423 MHz
25 kHz
Synthesizer (PLL)
-6
No more 5 x 10
WFM
3 – 4.5 V
No more 20 mA
No more 10 mA
12 – 17 mW
1.0 – 2.0 mW
from -30 to +50 C degrees
26 x 12 x 4 mm
15
AUDIO MONITORING
OEM Audio Transmitters
RMTK 100
Analog/Digital Audio Transmitter with RC
The product is rated both for telephone line and room acoustics monitoring, with
transmission of the obtained intelligence via crystal controlled radio channel.
All operation modes are user-defined and are set with internal keys or with RC. RC unit is
optional. The RMTK 100 is distributed in standard and light versions. Light version
excludes digital encryption option and RC unit.
Basic user-defined operation modes:
- Room acoustics or Telephone line control (with use of external microphone or inductive
sensor accordingly);
- Open/encrypted radio channel (delta modulation encoding);
- Transmitter output power control (30 mW/100 mW);
- VOX ON/OFF;
- RC ON/OFF;
- Transmitter ON/OFF with use of RC.
Transmitter
Remote Control
Digital "Delta Modulation" encryption method ensures impossibility of interception of the
transmitted intelligence (intercepted signal has no attributes of voice information and is
recognized as white noise).
Low output power mode (30 mW) guarantees longer operation time of the transmitter
and makes it difficult to locate with special detectors. High output power mode (100 mW)
increases the range of operation.
The product is equipped with Voice Activation function which activates the transmitter if
triggered by signal from telephone line or microphone and deactivates the transmitter
within certain period as the signal is lost. The Voice Activation function guarantees longer
operation time.
The product is designed in metal case and equipped with input for external microphone
or inductive sensor, input for charger, SMA socket for external universal antenna, power
ON/OFF switch and battery low indication.
The product is powered with internal NOKIA BL-5C rechargeable battery. Standard ACP12E (800 mA) charger for NOKIA phones is used for charging.
16
AUDIO MONITORING
OEM Audio Transmitters
Transmitted intelligence is received with the use of special WFM receivers produced by
ENDOACUSTICA EUROPE or other companies. Transmitted intelligence encoded with
Delta Modulation encryption method is received and decoded with the use of PRK045 or
ICOM R5D ENDOACUSTICA EUROPE special receiver.
SPECIFICATIONS:
TRANSMITTER
Frequency band
416.5 - 423.5 MHz
Frequency control
Crystal
Modulation
WFM/GMSK
Output power
30/100 mW
Power supply NOKIA BL-5C (3.7 V)
Li-Ion rechargeable battery
Input voltage of external recorder
5 - 15 V (800 mA)
Current consumption
No more 110 mA
Dimensions
62 x 59 x 12 mm
Weight:
- with rechargeable battery
65 g
- with microphone
87 g
- without microphone
75 g
REMOTE CONTROL
Power supply
6 V (4 x AAA)
Case dimensions
100 x 51 x 18 mm
17
AUDIO MONITORING
Analog Audio Transmitters
RMK 012 DISK
Crystal-Controlled Audio Transmitter
The product is rated for the audio intelligence via radio channel.
Transmitter is designed as a printed-circuit board with surface buildup protected with a
plastic cover. Power supply frame is located on the rear side of the printed-circuit board.
The product is equipped with built-in microphone and external antenna.
The product starts operating as soon as the battery is installed into power supply frame
with its positive pole up.
SPECIFICATIONS:
Frequency
Modulation
Approximate range of transmission
(with ICOM-R2 receiver, sensitivity 1 μV at
signal/noise 12 dB)
Dimensions (without antenna)
Antenna
Power supply
416.5 – 423.5 MHz
WFM
100 m
Diameter 30 x 7 mm
External
Internal, one European lithium cell CR2450
18
AUDIO MONITORING
Analog Audio Transmitters
RMK 032-038 CARDBOARD
Camouflaged audio transmitters
Durable high-quality audio monitoring & transmission via crystal controlled radio channel.
Radio microphone with antenna and power supply is designed in a sheet of 4.5-5.0 mm.
packing corrugated pressboard.
The product is equipped with a built-in microphone, special lithium power supply cells
and transmission antenna.
Only the manufacturer (ENDOACUSTICA EUROPE) should replace disposable power supply.
The product has no exterior distinctive attributes of the built-in audio transmitter.
Reception of the intelligence is available with the use of any scanning receiver with WFM
mode and with the use of ENDOACUSTICA EUROPE special receivers.
Model
RMK
RMK
RMK
RMK
RMK
RMK
RMK
032
033
034
035
036
037
038
Time of
continuous
operation
12 days
1 month
2 months
3 months
12 days
24 days
36 days
Dimensions,
mm
140
200
210
290
200
210
290
x
x
x
x
x
x
x
100
150
210
210
150
210
210
x
x
x
x
x
x
x
4
4
4
4
4
4
4
At request of the customer products are available with different values of output
frequency, output power and time of continuous operation, and also with different kinds
of frequency modulation. The dimensions of pressboard sheet, in which product is
hidden, depend on above-stated parameters.
At request of the customer it is possible to manufacture products with above mentioned
camouflage and the remote control and (or) with encoded channel.
SPECIFICATIONS:
Frequency
Frequency control
Modulation
Power supply voltage
Current drain:
- RMK 033, 034, 035
- RMK 032, 036, 037, 038
Output power:
- RMK 033, 034, 035
- RMK 032, 036, 037, 038
Power supply - flat lithium cells
(dimensions 100 x 50 x 3.2 mm)
416.5 – 423.5 MHz
Crystal
WFM
2.5 V - 3.2 V
3 mA
7 mA
0.5 - 1 mW
5 - 7 mW
3.2 V
19
AUDIO MONITORING
Analog Audio Transmitters
RMK 073, RMK 122, RMK 128, RMK 129
Audio Transmitters
Audio Transmitters are rated for transmission of audio intelligence via radio channel.
These products are universal modules rated for hidden installation.
Features:
- RMK 073 – Output power 1-30 mW, Supply voltage 2-6 V, Dimensions 18 x 9 x 3 mm;
- RMK 122 – Output power 100 mW, Supply voltage 2-3 V, Dimensions 35 x 12 x 3.5
mm;
- RMK 128 – Output power 30 mW, Supply voltage 2-3 V, Dimensions 35 x 12 x 3.5 mm;
- RMK 129 – Output power 500 mW, Supply voltage 2-3 V, Dimensions 64 x 15 x 10 mm.
RMK 073
Audio Transmitter
RMK 122, RMK 128
Audio Transmitters
RMK 122
Audio Transmitter
RMK 073 is designed, as an unpacked PCB sealed with protective compound is a
universal module rated for hidden installation. The transmitter is equipped with remote
microphone, flexible antenna, power supply connection leads, and is rated for it's further
camouflaging (hidden installation) in various objects.
RMK 122, RMK 128, RMK 129 designed in small metal cases are equipped with
connectors or leading-out wires for connection of external power supply, remote
microphone and flexible external antenna. The transmitters can be modified to function
with Remote Control units. Spectrum Inversion encryption function available as additional
modification. If modified to Spectrum Inversion encryption the transmitter specifications
are changed and its dimensions increased.
Signal reception is available with the use of ENDOACUSTICA EUROPE special receivers or
any scanning receiver with WFM mode. Transmitted audio is received with the use of
ENDOACUSTICA EUROPE special receiver.
20
AUDIO MONITORING
Analog Audio Transmitters
SPECIFICATIONS:
Operating
frequency
Modulation
Supply voltage
Output power
Current
consumption
Dimensions
RMK 073
2-6V
1 - 30 mW
5 - 30 mA
18 x 9 x 3 mm
RMK 122
RMK 128
416.5 – 423.5 MHz
RMK 129
WFM
2-3V
2-3V
2-3V
No less 100 mW No less 30 mW No less 500 mW
No more 80 mA No more 30 mA No more 400 mA
35 x 12 x 3.5
mm
35 x 12 x 3.5
mm
64 x 15 x 10 mm
21
AUDIO MONITORING
Analog Audio Transmitters
RMK 121 Module MS
Powerful Audio Transmitter (Vehicle Version)
Powerful Audio Transmitter in metal case with external microphone and flexible external
antenna designed for hidden installation in various types of vehicles.
Obtained intelligence is transmitted via crystal controlled radio channel. Crystal frequency
control eliminates frequency drift that can occur under effect of temperature and other
destabilizing factors.
Although RMK 121 is compatible with various types of modern receivers with WFM mode
ENDOACUSTICA EUROPE special receivers provide the best performance of the product.
Powerful RF output of the product provides long range of operation and reliable reception
of the transmitted signal in adverse radio conditions.
Features:
- Small size;
- Long range;
- Powerful output;
- Reliable operation in adverse conditions;
- Comfortable power requirements;
- Easy and fast to apply;
- Wrong polarity protection.
SPECIFICATIONS:
Operating frequency
Modulation
Audio bandwidth
Supply voltage
Current consumption (at 12 V)
Output power
Dimensions
416.5 – 423.5 MHz
WFM
0.3 - 6 kHz
9 - 14 V
No more 120 mA
No less 400 mW
82 x 28 x 8 mm
22
AUDIO MONITORING
Analog Audio Transmitters
RMK 141
Mains Audio Transmitter
Transmission of audio intelligence via radio channel.
Universal base radio-transmitter module with AC 220V power supply for covert
applications.
Features:
- Small dimensions;
- High quality audio;
- No AC Mains interference;
- High efficiency;
- Low heat release.
The product can be connected to 220 V AC Mains in any point with any polarity.
Signal reception is available with the use of ENDOACUSTICA EUROPE special receivers or
any scanning receiver with WFM mode.
The product is designed in a small metal case with protective dielectric coating, leads for
connection to the AC Mains, external microphone and external flexible antenna.
The product is rated for the further camouflaging.
SPECIFICATIONS:
Operating frequency
Frequency control
Modulation
Supply voltage
Output power
Current consumption (mains 220 V)
Dimensions
416.5 – 423.5 MHz
crystal
WFM
220 V, 50 Hz
No less 15 mW
No more 12 mA
51 x 13 x 6 mm
23
AUDIO MONITORING
Wearable Audio Transmitters
RMK 081 PEN
Portable Audio Transmitter
Audio transmitter is designed inside a popular capillary pen saving its main application.
Crystal control provides mobile applications of the product. For best antenna efficiency
just keep the pen as far as possible from your body.
Low power output makes it possible to obtain reliable reception inside concrete buildings
at short distances and complicates its detection by detecting equipment as well.
If you wish to expand the range of operation you can apply special directional antenna
for the receiver.
The microphone is installed inside the pinhole duct in the top of the pen. The refill is
shortened. For replacement of power supply unscrew the pen and extract the cells from
the power supply compartment. The product has no special power switch and starts its
operation after installation of power supply container and tightening the housing. It is not
recommended to keep the batteries inside the power supply compartment for a long
time.
Observe polarity while battery replacement. The cells are installed in sequence with
positive poles downward the container.
Transmitter
SPECIFICATIONS:
Frequency
Frequency control
Output power
Modulation
Attenuation of harmonic component
Range of operation
Power supply
Time of continuous operation
Antenna
Microphone
416.5 – 423.5 MHz
Crystal
no less 7 mW
WFM
no less -25 dB
100 m
2 x 1.5 V V393 VARTA
6h
Built-in
Built-in, aperture diameter 1 mm
24
AUDIO MONITORING
Wearable Audio Transmitters
RMK 123, RMK 124, RMK 127
Portable Audio Transmitters
The products are rated for transmission of audio intelligence via radio channel.
- RMK 123 – Output power 100 mW, Current consumption 80 mA;
- RMK 124 – Output power 500 mW, Current consumption 400 mA;
- RMK 127 – Spectrum Inversion encryption, Output power 100 mW, Current
consumption 85 mA.
Features:
- possible to connect to external power supply;
- compatible with external microphone;
- compatible with directional antenna (doubles operation distance).
RMK 123, RMK 124, RMK 127
Portable Audio Transmitters
The transmitters are designed in tough metal cases. Each model includes battery life
indication, power switch, connectors for external microphone (70 cm), flexible external
antenna, external power supply or charger.
The product is powered with internal Li-Ion rechargeable battery NOKIA BL-5C or with
external power supply. Standard NOKIA phone charger for is used for charging.
RMK 127 includes spectrum inversion encryption function which protects the transmitted
data from interception and deciphering.
RMK 123, RMK 124, RMK 127 can be modified to include spectrum inversion encryption
function.
Transmitted intelligence is received with the use of special WFM receivers produced by
ENDOACUSTICA EUROPE or other companies. Transmitted intelligence encoded with
Delta Modulation encryption method is received and decoded with the use of PRK040I
special receiver.
SPECIFICATIONS:
Operating frequency
Modulation
Power supply
Output voltage of
external recorder
Output power
Current consumption
Dimensions
RMK 123
RMK 124
RMK 127
416.5 – 423.5 MHz
WFM
Li-Ion rechargeable battery NOKIA BL-5C (3.7 V)
2.9 – 4.3 V
No less 100 mW
No more 80 mA
No less 500 mW
No more 400 mA
62 x 59 x 12 mm
No less 100 mW
No more 85 mA
AUDIO MONITORING
Wearable Audio Transmitters
RMK 191 STICKER
Compact Portable Audio Transmitter
The product is rated for transmission of audio intelligence via radio channel.
Features:
- Small dimensions;
- Flexible modular design;
- Convenience of camouflaging;
- High quality audio;
- Easy power supply replacement.
The product is rated for body worn applications. Flexible modular design allows to hide
the audio transmitter in clothing.
The product consists of three compact modules: microphone with amplifier, the
transmitter and power supply compartment. The modules are connected with a soft cable
functioning as the antenna.
Output power of the products provides optimal balance between the range and the time
of continuous operation.
Signal reception is available with the use of ENDOACUSTICA EUROPE special receivers or
any scanning receiver with WFM mode.
SPECIFICATIONS:
Operating frequency
Frequency control
Modulation
Supply voltage
Output power
Current consumption (at 3 V)
Time of continuous operation
(2 x 1.5 V V625)
Transmitter length
416.5 – 423.5 MHz
crystal
WFM
2.5 – 3.5 V
No less 30 mW
No more 30 mA
No less 6 hours
Approx. 375 mm
26
AUDIO MONITORING
RC Analog Audio Transmitters
LEGO-30, LEGO-100
Multipurpose RC Audio Transmitter Kits for Covert Installation
The products are rated for transmission of audio intelligence via radio channel.
RMK 122 and RMK 128 are used as base modules for Multipurpose RC Audio Transmitter
Kits. The products are designed in small metal cases with connector outputs which allows
to use them as interchangeable modules in different variations for multiple purposes.
Transmitters are equipped with miniature connectors for connection of RC receiver and
various types of external power supplies:
- Mains 220 V;
- Vehicle power supply 12 V;
- Batteries 2 x AA 1.5 V.
For establishing a remotely controlled radio link the transmitters are used with
ENDOACUSTICA EUROPE products:
- RC transmitter unit DPK 003;
- RC receiver KDK 003.
Audio Transmitter
220 V AC power supply unit
Remote Control Receiver
Car adapter
Remote Control
Power supply compartment
Variants of Radio link based on LEGO sets:
- Audio Transmitter with RC and mains power supply (220 V);
- Audio Transmitter with RC and vehicle power supply (12 V);
- Audio Transmitter with RC and battery power supply (3 V);
- Audio Transmitter and mains power supply (220 V);
- Audio Transmitter and vehicle power supply (12 V);
- Audio Transmitter and battery power supply (3 V);
Best signal reception is performed by special ENDOACUSTICA EUROPE receiver PRK 040.
27
AUDIO MONITORING
RC Analog Audio Transmitters
SPECIFICATIONS:
Operating frequency
Frequency control
Modulation
Supply voltage
Output power
Current consumption
Power supply types (3 V):
- mains adapter (220 V)
- vehicle adapter
- battery compartment
LEGO-30
LEGO-100
416.5 – 423.5 MHz
crystal
WFM
2.2 – 3.2 V
No less 30 mW
No less 100 mW
No more 30 mA
No more 80 mA
No less 40 mA
No less 100 mA
No less 80 mA
No less 100 mA
2 x AA 1.5 V
28
AUDIO MONITORING
Telephone Line Transmitters
PTK 090, PTK 093, PTK 100D
Telephone Line Monitoring and
Transmission of The Obtained Intelligence via Radio Channel
The products are rated for telephone line monitoring and transmission of the obtained
intelligence via radio channel.
Features:
- PTK 090 – parallel connection to the telephone line, Output power 7 mW, Dimensions
51 x 15 x 7 mm;
- PTK 093 – series connection to the telephone line, Output power 7 mW, Dimensions 30
x 12 x 9 mm;
- PTK 100D – Spectrum Inversion encryption, series connection to the telephone line,
Output power 15 mW, Dimensions 72 x 22 x 5 mm.
PTK 090
PTK 093
PTK 100D
The transmitter is designed in a rectangular metal case with flexible antenna and with
leads for connection to a telephone line.
PTK 100D includes spectrum inversion encryption function which protects the transmitted
data from interception and deciphering.
The product is connected serially in the break of one of the wires of an urban telephone
line in any point and with any polarity.
The product is switched automatically in the transmission mode as soon as the handset is
picked up.
Unless the handset is picked up the product stays in the standby mode, the transmitter is
switched Off. As soon as the unit is powered from the telephone line the time of its
operation is practically unlimited. Connection of the unit to the telephone line does not
cause any effect on the line.
Transmitted intelligence is received with the use of special WFM receivers produced by
ENDOACUSTICA EUROPE or other companies. Transmitted intelligence encoded with
Delta Modulation encryption method is received and decoded with the use of PRK045 or
ICOM R5D ENDOACUSTICA EUROPE special receiver.
29
AUDIO MONITORING
Telephone Line Transmitters
SPECIFICATIONS:
Operating frequency
Modulation
Frequency control
Output power
Voltage drop
Phone line connection
Power supply
Dimensions
PTK 090
WFM
7 mW
Parallel
51 x 15 x 7 mm
PTK 093
416.5 – 423.5 MHz
WFM
crystal
7 mW
No more 6.5 V
Serial
Telephone line
30 x 12 x 9 mm
PTK 100D
GMSK
15 mW
No more 6.5 V
Serial
72 x 22 x 5 mm
30
AUDIO MONITORING
Combined Area Acoustics, Telephone Monitoring
STK 050, STK 100D
Audio Transmitter for Room Acoustics and Telephone Monitoring
The products are rated for audio transmitter for room acoustics and telephone
monitoring.
Specifications:
- STK 050 – parallel connection to the telephone line, output power no less 5 mW,
dimensions 45 x 38 x 9 mm;
- STK 100D – Spectrum Inversion encryption, parallel connection to the telephone line,
Output power no less 3 mW, dimensions 55 x 27 x 8 mm.
STK 050
STK 100D
The miniature-transmitters are designed as compact modules sealed with compound with
external microphone, external antenna, and flexible leading-out wires for telephone line
connection.
STK 100D includes spectrum inversion encryption function which protects the transmitted
data from interception and deciphering.
The product is connected serially in the break of one of the wires of an urban telephone
and is powered from the line.
The transmitter operation modes are switched automatically between room acoustics and
telephone monitoring.
The transmitter stays in the room acoustics mode until the telephone handset is picked
up. As soon as the handset is picked up the transmitter is automatically switched to the
telephone monitoring mode.
As soon as the unit is powered from the telephone line the time of its operation is
practically unlimited. Connection of the unit to the telephone line does not cause any
effect on the line.
Transmitted intelligence is received with the use of special WFM receivers produced by
ENDOACUSTICA EUROPE or other companies. Transmitted intelligence encoded with
Delta Modulation encryption method is received and decoded with the use of PRK045 or
ICOM R5D ENDOACUSTICA EUROPE special receiver.
31
AUDIO MONITORING
Combined Area Acoustics, Telephone Monitoring
SPECIFICATIONS:
Operating frequency
Frequency control
Modulation
Power supply
- room acoustics mode
- telephone monitoring
Current consumption:
- room acoustics mode
- telephone monitoring
Output power
Telephone line connection
STK 050
WFM
STK 100D
416.5 – 423.5 MHz
crystal
GMSK
Telephone line
6 – 15 V
40 – 60 V
No more 1 mA
No more 12 mA
No less 5 mW
parallel
No more 1.5 mA
No more 15 mA
No less 2.5 mW
parallel
32
AUDIO MONITORING
Receivers
PRK 040, PRK 040I, PRK 040D
Special Multi-Channel Receivers
Special multi-channel receivers rated for reception of radio signal.
Models:
- PRK 040 – open radio channel;
- PRK 040I – open radio channel + Spectrum Inversion decoder;
- PRK 040D – open radio channel + Delta Modulation decoder.
Features:
- Individual programming of each channel (frequency synthesizer);
- Automatic Carrier Operated Recording;
- Battery Low indicator.
- Low power consumption;
- External power supply (with ON indication) 6 - 9 V.
- Tough milled case.
PRK 040, PRK 040I, PRK 040D
Special Multi-Channel Receivers
The receivers are designed in a milled metal case. Each receiver is equipped with
minimized quantity of controls - volume control combined with power ON/OFF switch,
Channel selector, Carrier LED indicator, earphones output, SMA antenna output and the
Recorder output combined with Recorder Remote Control function.
SPECIFICATIONS:
Receiving frequency bandwidth
Quantity of memory channels
Modulation
Sensitivity (at signal/noise 10 dB):
- PRK 040
- PRK 040I
- PRK 040D
Current consumption
at an average volume
External power supply
Internal power supply
Dimensions
416 – 421 MHz
10
WFM
No
No
No
No
less 0.5 μV
less 1 μV
less 1.5 μV
more 50 mA
6–9V
3 AAA x 1.5 V
130 x 67 x 20 mm
33
AUDIO MONITORING
Receivers
ICOM R5D
Scanning Receiver
with The Digital "Delta Modulation" Decoder
Scanning receiver with the digital "Delta Modulation" decoder rated for application within
the structure of digital and analog radio links.
The receiver is designed on the basis of ICOM-R5 scanning receiver.
Special extra module installed in the receiver provides digital signal decoding.
All functional and characteristic features of the original scanning receiver are kept with
no changes.
The following controls and indicators are added on the receiver case:
- Digital stream reception LED indicator (LED indicator is On while receiving);
- Audio Expander Switch.
Capability of analog signal reception feature of the original receiver is saved.
"Analog"-"Digital" signal reception is selected automatically by the decoder PCB added to
the receiver so no special touch on controls is required.
SPECIFICATIONS:
Type of the received signal
Sensitivity
Current drain at an average volume
Power supply
Dimensions
WFM, GMSK
No less 1.5 μV
150 mA
2 x 1.2 V rechargeable batteries, size AA
2 x 1.5 V alkaline batteries, size AA
58 x 86 x 27 mm
34
AUDIO MONITORING
Repeaters
RRU 010
Controlled Repeater System
Remotely controlled repeater is rated for open and encrypted retransmission of signals
received from low-power audio transmitters. "Delta Modulation" digital encryption
method ensures impossibility of interception of the transmitted intelligence (intercepted
signal has no attributes of voice information and is recognized as white noise).
Complete set:
1. Repeater.
2. DPK 003 remote control.
3. Special receiver ICOM R5D.
Repeater
DPK 003 remote control
Special receiver ICOM R5D
with antenna
Main component parts of the product have dust/damp proof design.
The repeater is designed in water-airtight crushproof PELI case.
The repeater is capable to store in its memory up to 4 reception and 1 transmission
channels.
To increase the repeater range of operation it is recommended to apply external
directional antennas.
Remote control transmitter supplied with the repeater provides remote control over
modes of operation, selection of reception/transmission channels and open/encrypted
transmission mode.
The product is equipped with built-in antennas, power supply and sealed connectors for
external antennas and external power supply.
All controls of the repeater are on the panel located under the case lid that provides
airtight conditions when the case is closed.
Signal reception is available with the use of ENDOACUSTICA EUROPE ICOM R5D product
with DPK 003 remote control panel.
Special monitoring center with independent power supply and recording function is
available according to an individual order of the customer.
To increase the repeater range of operation it is recommended to apply external
directional antennas supplied with the product.
35
AUDIO MONITORING
Repeaters
SPECIFICATIONS:
Frequency band
Memory channels quantity
Sensitivity of the receiving section
(at signal/noise 10 dB)
Current consumption:
- operating mode
- stand by mode
Transmitter operating frequency
Modulation
Transmitter output power (at load
resistance 50 ohm)
RC frequency
Sensitivity of the RC receiver
Supply voltage
Dimensions
416 – 421 MHz
4
No less 1 μV
No more 250 mA
No more 0.5 mA
1010 - 1070 MHz
GMSK
No less 0.5 W
140 – 150 MHz
No less 0.5 μV
12 V, 1 A
238 x 141 x 67 mm
36
AUDIO MONITORING
Directional Microphones
NM 011
ATTACHÉ CASE
Directional microphone
The unit is rated for remote recording of audio intelligence.
The directional microphone is represented as an attaché case. Acoustic grid of the
microphone is located in the attaché case lid. It is designed so that the attaché case has
no external distinctive signs of the built-in directional microphone both from outside and
inside of the case.
Maximum of the microphone polar pattern is perpendicular to the plane of the attaché
case lid.
Filtering of acoustic noises and voice recovery jobs are carried out by the low-noise
amplifier equipped with its own power supply. The amplifier is equipped with volume
control, power supply indicator, low battery indicator, stereo earphones jack. Two hidden
switches are located near to the case handle at its both sides. One of the switches is used
to switch the amplifier On/Off, another one is designed for optional control of recording
or any other aux. function. Monophonic earphone jack installed near to the handle of the
attaché case is used for test / monitoring purposes.
Obtained intelligence can be simultaneously recorded with the use of the built-in highperformance minidisk recorder.
Complete set:
1. Directional microphone.
2. Amplifier.
3. Minidisk recorder.
NM 011, Amplifier,
Minidisk recorder
SPECIFICATION:
Overall dimensions of the case
Amplifier dimensions
Internal power supply
Range of monitoring
(intelligibility 50 %)
Time of continuous recording SP/LP mode
(minidisk 80)
Current consumed by the amplifier
(at medium Volume level)
105 x 405 x 445 (+/-5) mm
3 x AAA 1,5 V
10 m
80 min./120 min.
15 mA
37
AUDIO MONITORING
Wire Systems for Audio Monitoring
PM 010
"Long Range Line" Wire Microphone
The product is rated for transfer of audio intelligence at a distance of up to 250 m via a
two-wire unshielded link.
The wire microphone is designed in a metal cylinder case. Contact pads for wire link
connection are located on one of the end surfaces of the cylinder. Audio input is located
at the opposite side of the product.
The product is compatible with most types of recorders equipped with microphone input
or line input.
The microphone has high acoustic properties and low inherent noise level. It is capable to
operate in a complex acoustic environment.
Wire microphone can be connected to the link with any polarity.
SPECIFICATIONS:
Supply voltage
Current consumption
Output voltage of audio signal
(620 Ohm +/- 20 %)
Audio response
Recommended length
of 2-wire unshielded pair
Maximum length
of 2-wire unshielded pair
Dimensions
10 - 13 V
No more 10 mA
No less 250 mV
400 - 12000 Hz
250 m
1 km
Diameter 8 x 20 mm
38
AUDIO MONITORING
Wire Systems for Audio Monitoring
SOM 010, SOM 020
Wire Audio Microphones
Tiny pinhole fibre-optic audio microphones connected to its fibre-optical cable provides
security services and TV/audio-studio’s a reliable and versatile method for capturing and
recording high quality sound up to a distance of 1 kilometres.
Features:
- Pinhole sized microphone; length 21.5 mm, diameter 4.5 mm. Two models of
Microphone Heads: Straight and Corner.
- Size of microphone extension tube: length only 4.5 mm, diameter: 1.5 mm. This can be
easily attached to the Microphone Head and facilitates installation into any structure.
- The SOM microphones are ultra sensitive, offering wide dynamic range and ensuring
that all sound is heard. Whispers are understood as clearly as normal conversations or
the beating of a drum
- SOM’s revolutionary optical sensor technology senses the characteristics of reflected
light. LED light passes through an optical fibre to the microphone head, and then onto a
reflective membrane. Sound waves hitting the membrane cause it to vibrate, effecting a
change in light. A photo detector registers the reflected light and electronic processing
interpret the resulting light pattern into an accurate audible sound.
- No electricity runs through the microphone or the connected optic fibres. Consequently
no Electro-magnetic fields are present whatsoever which makes the microphone virtually
undetectable by means of electronic audio counter-surveillance systems.
- Applications: security, surveillance, TV/Radio/Audo studio’s, medical-, scientificindustrial applications.
- Line output on Electronic processing unit is 3.5 mm stereo mini jack. Connect to it the
recommended SONY dat recorder PCT D8 to which a headphone can be connected.
Complete set:
1. Microphone with fibre-cable length 10 (SOM 10) or 20 (SOM 020) meters.
2. Amplifier.
Microphone
Amplifier
SOM fibre-optic audio microphone has been based on the measurement of back-scattered
light from an acoustic membrane. The reflected light characteristics correspond to the
sound pressure on the membrane.
While the microphone is placed in a prescribed recording location, the electronic
components can be placed at a distance of up to 1 kilometre, connected only by the
fibre-optic cable.
39
AUDIO MONITORING
Wire Systems for Audio Monitoring
SPECIFICATIONS:
Type of microphone
Models of microphone Heads
(specify with order)
Polar pattern
Frequency response
Noise floor
Signal-to-Noise ratio
Distortion
Max. Static Pressure on Membrane (SPL)
Output Impedance
Supply voltage
Current Drain
Optical Power
Attention
Standard Optical Fibre Length
Weight Microphone Head
Dimensions Microphone Head
Dimensions of Extension tube
Environmental
Available standard models
Fibre-optic microphone
Straight (S)
Corner (C)
Omnidirectional
220-4500 Hz (+/- 5 dB)
27 dB SPL at 1 kHz
67 +/- 3 dB SPL at 1 kHz
no more 5 % at 94 dB
no more 1 % at 84 dB
124 dB
680 Ohm, (standard line input)
9 –12 Volt DC (recommended: 12 V)
80 mA
Less than 3mW
2 dB per kilometres of fibre
10 metres (for SOM 010)
20 metres (for SOM 020)
1 gram
21.5 x 4.5 mm (diameter)
4.5 x 1.5 mm (diameter)
from -10 to +50 degrees C
Humidity 99 %, RH, non-condensing.
SOM 1-10 metres (naked fibre), metres
(naked fibre)
40
AUDIO MONITORING
Wire Systems for Audio Monitoring
KPL-S, KPL-SD
220 V Wire Transmitter-Receiver System
The system is rated for room monitoring and intelligence transfer on subcarrier
frequencies via 220 V, 50 Hz AC Mains.
- KPL-S – analog channel;
- KPL-SD – digital encryption “Delta Modulation” method.
Complete set:
1. KPL-S/KPL-SD transmitter.
2. KPL-S/KPL-SD receiver.
KPL-S Transmitter
KPL-SD Transmitter
KPL-S and KPL-SD Receiver
Intelligence transmitters are designed as unpacked modules with external microphone
and AC 220 V mains connection leads. The transmitter is connected parallel to 220 V
mains in any point with any polarity.
Intelligence receivers are represented as a separate module in a metal case with leads
for connection to the mains, earphone and recorder line-outs and external power supply
socket. Volume control, tuning knob and On/Off switch are located on the front panel of
the receiver.
SPECIFICATIONS:
Operating frequency
Modulation
Current consumption (at 220 V)
Output voltage
Power supply
Dimensions
Tuning range
Modulation of the received signal
Sensitivity (at signal/noise
10 dB)
Power supply:
- internal
- external
Dimensions
KPL-S
KPL-SD
Transmitter
1.6 – 2.4 MHz
FM
GMSK
No more 15 mA
No more 20 mA
No less 200 mV
220 V, 50 Hz
45 x 25 x 13 mm
65 x 25 x 10 mm
Receiver
1.6 – 2.4 MHz
FM
GMSK
No less 10 μV
4 x 1.5 V AAA
6 V DC 40 mA
130 x 67 x 20 mm
41
AUDIO MONITORING
Wire Systems for Audio Monitoring
KPL-T, KPL-TD
Telephone Wire Transmitter System
The products are rated for transfer of disguised audio intelligence via an engaged
subscriber telephone line.
- KPL-T – analog channel;
- KPL-TD – digital encrypted channel.
The product is rated for transfer of disguised audio intelligence via an engaged subscriber
telephone line. Connection of the product to a subscriber telephone line does not disturb
operation of the subscriber telephone set (dialing, ring signals passage) and does not
affect the quality of the subscriber telephone communication channel.
Complete set:
1. KPL-T/KPL-TD transmitter.
2. KPL-T/KPL-TD receiver.
3. KPL-TD BUK (for KPL-TD).
KPL-T Transmitter
KPL-TD Transmitter
KPL-T and KPL-TD receiver
KPL-TD BUK amplifier & repeater
KPL intelligence transmitter is designed as a unpacked PCB with an external microphone
and lead-outs for parallel connection to a telephone line. The transmitter is powered from
DC 6-60 V subscriber telephone line.
KPL intelligence receiver is designed in a metal case. The receiver is equipped with
battery compartment for four rechargeable or alkaline batteries. Alternatively the
receiver can be powered from an external power supply unit. If connected to an external
power supply the receiver battery or rechargeable batteries are disconnected.
KPL-BUK amplifier & repeater unit provides amplification and transmission of the
obtained intelligence from one subscriber line to another, leaving aside the ATX
switchboard.
42
AUDIO MONITORING
Wire Systems for Audio Monitoring
KPL-BUK product is powered from the telephone line or from an external power supply
from the direction of the second line.
KPL-TD applies adaptive-delta modulation (ADM) for masking of the transmitted audio
intelligence.
SPECIFICATIONS:
KPL-T
KPL-TD
Transmitter
Operating frequency
Modulation
Current consumption at
telephone line power
Output power
Power supply
Dimensions
360 +/- 400 kHz
FM
No more 0.9 mA
360 +/- 40 kHz
GMSK
No more 1 mA
No less 100 mV
Telephone line
23 x 18 x 8 mm
62 x 32 x 17 mm
Receiver
Power:
- internal
- external
Dimensions
Active resistance
Gain
Dimensions
4 x 1.5 V AAA
6 V DC, 40 mA
130 x 67 x 20 mm
KPL-BUK amplifier & repeater unit (for KPL-TD)
20 Ohm
15 dB
50 x 50 x 15 mm
43
AUDIO MONITORING
Wire Systems for Audio Monitoring
VISHNYA
Multi-Channel Room Monitoring System
with Audio Transfer via One Pair Line
The product is rated for room audio monitoring with the use of one pair line and
microphone select function.
Principle of operation of the system is based on transfer of analog audio via a two-wire
dedicated line. Each of wire microphones has its digital ON/OFF code. As soon as the
selected microphone is switched ON all the rest ones are switched OFF automatically and
staying in standby mode.
Overall extent of the wire link can reach over 200 meters.
Features:
- One pair line for all channels;
- 10 or 32 channels;
- No shielding of the wire line is required;
- No observation of microphone polarity is required;
- Over 200 meters line extent;
- Microprocessor control;
- Microphone dimensions (diameter 9 x 25 mm);
- Individual On/Off code for each microphone;
- Line failure indication;
- «Microphone - Switchboard» Feedback function;
- Telephone line-monitoring function (order);
- Switchboard equipped with LCD;
- Recording channel.
Complete set:
1. Microphones.
2. Switchboard.
Microphone
Switchboard
Microphones are connected to a double-wire line. The line is connected to the "LINE"
input /"tulip" plug / of the switchboard. The swichboard is powered from mains 220 V.
Headphones are plugged to EAR receptacle on the front panel of the switchboard. For the
tape recorder connection a special cable is used (optional).
44
AUDIO MONITORING
Wire Systems for Audio Monitoring
SPECIFICATIONS:
Swichboard power supply
One microphone current consumption
Output voltage ("REC" output)
Acoustic signal output power("EAR" output)
Channels
Line length
Voltage in telephone line
Activation time
Switchboard Dimensions
Microphone Dimensions
220 V, 50 Hz
11 mA
100 mV
300 mW
up to 32
up to 200 m
12 V
0.5 sec.
225 x 200 x 75 mm
Diameter 9 x 25 mm
45
AUDIO MONITORING
Stethoscopes
RSK 010
Radio Stethoscope
Audio monitoring through building structural units (wall, ceiling etc.) with transmission of
the obtained intelligence via crystal-controlled radio channel.
Features:
- Small dimensions;
- Independent power supply;
- High-sensitive piezo-ceramic converter.
The radio stethoscope is designed in a cylindrical case with flexible external antenna and
built-in power supply frame.
The product is mounted on a solid surface with the use of glue or mastic.
Reception of audio intelligence is available with the use of ENDOACUSTICA EUROPE
special receivers (i.e. PRK 040) and any type of regular scanning receivers with WFM
mode.
SPECIFICATIONS:
Sensor response level
Pass band at 6 dB irregularity
of amplitude-frequency response
Frequency
Frequency control
Output power
Modulation
Power supply voltage
Time of continuous operation
External antenna
Weight
Dimensions
-5
No less 10
0.2 - 6 kHz
g
416.5 – 423.5 MHz
crystal
3 - 5 mW
WFM
3 V, CR2450 (1 cell)
No less 50 hours
160 mm
35 g
Diameter 30 x 18 mm
AUDIO MONITORING
Stethoscopes
SS 021
Stereo Stethoscope
Audio monitoring through building structural units (wall, ceiling etc.).
Features:
- Stereo mode;
- High sensitive piezo-ceramic converter;
- Independent power supply;
- Ease of battery replacement;
- Portable.
Complete set:
1. External sensors.
2. Amplifier.
External sensors
Amplifier
External sensors are designed in non-separable metal housings with flexible amplifier
connection cables. The sensors are designed with use of piezo-ceramic elements.
In order to achieve minimal level of noise and maximize the dynamic range of acoustic
signal special low-noise amplifiers are used. The amplifier is designed in a metal case
with outputs for headphones and recorder.
SPECIFICATIONS:
Sensor response level
Dynamic range of amplifiers
Frequency-dependent attenuator ensures
amplitude-frequency response roll off:
- at 1 kHz
- at 300 Hz
Damping between channels
Stereo balance control
Current consumption at an average volume
level
Power supply:
- built-in
- external
Dimensions of the amplifier unit
-5
No less 10
g
No less 60 dB
6 dB
15 dB
No less 40 dB
+/-10 dB
No more 25 mA
4 x AA 1.5 V
9 - 12 V
128 x 99 x 23 mm
47
VIDEO MONITORING
Video Transmitters
VPCh 041, VPCh 041N
Video Transmitters
Video transmitters are rated for transmission of audio and video signals via radio
channel.
Portable video transmitters VPCh 041 and VPCh 041N are designed in the crush-proof
milled metal case with connectors for power supply, antenna, video camera and
microphone. Both color and black-and-white video cameras can be applied for joint
operation with the unit. Reception of the transmitted audio and video is available with the
use of ENDOACUSTICA EUROPE tuner PRM TV.
Optionally Remote Control function can be applied to the Video Transmitters with use of
ENDOACUSTICA EUROPE special RC receiver KDK 003 M and RC transmitter DPK 003.
Features:
- Low power consumption.
- Heavy-duty professional design.
- High quality video and audio.
- Multiple protection against reverse polarity, short-circuit antenna failure, accidental
antenna disconnection antenna cable failure, etc.
- Stationary, Portable and Mobile applications.
- Best fit for body-worn application.
Power supply:
- 12 V rechargeable battery;
- Car electrical system;
- 12 V, 500 mA AC power adapter.
SPECIFICATIONS:
Operating frequency:
- VPCh 041
- VPCh 041N
Carrier frequency control
Subcarrier frequency control
Modulation
Supply voltage
Current consumption (at power = 12.6 V)
(with no camera)
Output power (at 12.6 V)
Audio subcarrier
Dimensions
1010 - 1070 MHz
413 MHz
Synthesizer
-6
(relative instability No more 100 x 10 )
Synthesizer
FM
10.5 – 14 V
No more 240 mA
No less 0.7 W
7.5 MHz
85 x 58 x 17 mm
48
VIDEO MONITORING
Video Transmitters
VPCh 050
Compact Video Transmitter
Designed for covert and overt applications VPCH 050 provides medium range
transmission of audio video signal with professional quality and reliability both from B/W
and color cameras.
VPCH 050 transmitter is designed in a compact sealed steel case with terminals for
connection of external equipment.
Different power supply voltages of various types of video cameras are balanced with the
transmitter voltage with the use of ENDOACUSTICA EUROPE STEP-UP VOLTAGE
CONVERTER or ENDOACUSTICA EUROPE STEP-DOWN STABILIZER.
Reception of the transmitted audio and video is available with the use of ENDOACUSTICA
EUROPE PRM TV. Optionally Remote Control function can be applied to the Video
Transmitters with use of ENDOACUSTICA EUROPE special RC receiver KDK 003 M and RC
transmitter DPK 003.
Features:
- Flexible power supply solutions;
- Low power consumption;
- Low-voltage power supply
- Small dimensions.
Available camouflage solutions:
- mobile phone;
- cigarette pack.
SPECIFICATIONS:
Operating frequency
Modulation
Supply voltage
Current consumption
(at supply voltage 6 V)
Output power
Dimensions
950 - 1200 MHz
FM
3-6V
No more 70 - 200 mA
No less 50 - 300 mW
40 x 20 x 6 mm
VIDEO MONITORING
Video Transmitters
VPCh 061
Video Transmitter
Video transmitter is rated for transmission of audio and video signals from video cameras
via radio channel.
Video Transmitter is equipped with internal power converter for camera power supply,
external microphone and connectors for power supply, video camera and SMA antenna
connector. Optionally Remote Control function can be applied to the Video Transmitters
with use of ENDOACUSTICA EUROPE special RC receiver KDK 003 M and RC transmitter
DPK 003.
Reception of the transmitted audio and video is available with the use of ENDOACUSTICA
EUROPE tuner PRM TV.
Features.
- Small Dimensions;
- At power drop below 3.4 V VPCh 061 transmits alarm tone signal to audio channel. If
current consumption of the connected camera is over 180 mA the Transmitter
automatically terminates power supply to the camera and transmits alarm tone signal to
audio channel;
- Low-voltage Li-POL power supply.
Power supply:
- 3 x 12 V or 1 x 3.6 V rechargeable battery;
- Car electrical system;
- 3.6 – 4.5 V, AC power adapter (output current no less 1.2 A).
SPECIFICATIONS:
Operating frequency
Frequency control
(incl. audio subcarrier)
Modulation
Supply voltage
Supply voltage of the connected camera
(from video transmitter)
Current consumption of the connected
camera
Current consumption (at 3.6 V) with no
camera
Output power (at 3.6 V)
Dimensions
1010 - 1070 MHz
Synthesizer
-6
(relative instability no more 5 x 10 )
FM
3 – 4.5 V
9 – 10 V
No more 140 mA
No more 400 mA
No less 0.4 W
72 x 39 x 11 mm
VIDEO MONITORING
Video Receivers
PRM TV
Video Tuner
The product is rated for reception of FM signal from video transmitter and conversion of
the signal into video and audio channels essential for linear inputs of LCD-monitors or TV
sets.
The product is designed in a metal case. SMA-antenna connector, LED power indicator
and channel selector (for PRM TV M) are located on the front panel of the unit. Audio and
video connectors, and external power supply connector are located on the rear panel.
The tuner has a high-performance pre-selector ensuring high level of sensitivity and
reliable operation in heavy electromagnetic environment.
The product is protected against wrong power supply polarity.
Features:
- Low power consumption;
- High sensitivity;
- Original circuitry;
- Ease of use.
The other side
The product can be powered both from the on-board car electrical system and from an
AC power adapter (12 V, 200 mA output).
SPECIFICATIONS:
Frequency band
Modulation
Sensitivity
Video output level
Power supply
Power consumption
Dimensions
1010 - 1070 MHz
1155 - 1220 MHz
FM
15 μV
1 V on 75 Ohm
8 - 12 V
No more 1.3 W
140 x 60 x 22 mm
51
VIDEO MONITORING
Video Receivers
CYCLONE, CYCLOP, HURRICANE
Control Stations
PRM TV Video Tuner-based Control stations CYCLONE, CYCLOP, HURRICANE are rated for
reception of FM signal from video transmitter, its conversion, recording and playback.
Standard Control Case set includes PRM TV Video Tuner, video recorder, switchboard,
antennas, charger, AC/DC power converter 200 V/12 V.
Video TX signal is received with the PRM TV tuner and recorded to Mini-DV format with
SONY GV-D1000E Recorder. Playback function is available. Switchboard is rated for
power supply management of the devices within the Control Case.
The products can be powered from the on-board car electrical system (12 V), from an AC
power adapter (12 V/200 V), and from the built in rechargeable battery (12 V, time of
continuous operation – 7 hours).
CYCLONE – reception of video signal; recording and playback.
CYCLOP – reception of video signal; recording and playback; remote control of the video
TX.
HURRICANE – reception of video signal (both open and encrypted); recording and
playback; remote control of the video TX. Hurricane-M model is equipped with 15” LCD
monitor.
Original shock/water-proof PELI case is used for Cyclone, Cyclop and Hurricane systems.
CYCLOP and HURRICANE systems can be produced in EMINENT case.
SPECIFICATIONS:
Frequency
Modulation
Supply voltage
Current consumption
Record time
("Long Play" mode, 80 min tape)
Operation time
(from rechargeable battery)
1010 – 1070 MHz
FM
12 V
0.7 A
120 minutes
from 2 to 7 hours
52
VIDEO MONITORING
Video Systems
CIGARETTE BOX
Portable Video Complex
The product is rated for short-range audio and video transmission.
The product is designed on the basis of the compact VPCH 050 video transmitter.
Cigarette box with complete module
The transmitter is designed as complete module in a plastic case including the built-in
camera, microphone, antenna and power supply compartment.
The module can be applied both independently and with the use of various types of
camouflage including cigarette box.
Audio and video can be received with the use of PRM TV special FM tuner
(ENDOACUSTICA EUROPE).
SPECIFICATIONS:
Output power
Power supply voltage
Current drain
Modulation
Time of operation
(1.100 A/h battery)
Range of operation (indoors)
Carrier frequency of the image
Resolution
Angle
Sensitivity
50 mW
4.6 – 6 V, 4 x AAА
120 mA
FM
6 hours
15 - 30 m
950 - 1200 MHz
380 TV lines
40 - 70 degrees
2 - 3 lux
At the request of the customer the product can be equipped with remote control function.
VIDEO MONITORING
Video Systems
CELLULAR TELEPHONE
Portable Video Complex
Short range audio-video transmission.
The product is based on VPCH 050 compact video transmitter.
Color or B&W video camera, microphone and video transmitter are concealed inside
cellular telephone housing.
The product is powered from the conventional rechargeable battery of the cellular
telephone it is installed in.
Video and audio reception is available with the use of a special FM tuner of
ENDOACUSTICA EUROPE PRM TV.
The cellular telephone set can be used according to its original purpose.
SPECIFICATIONS:
Output power
Power supply voltage
Current drain
Modulation
Time of operation
Mean range of operation (indoors)
Video Carrier frequency
Resolution
Angle
Sensitivity
50 mW
Original rechargeable battery
200 mA
FM
2 hours
15 - 30 m
950 - 1200 MHz
380 TV lines (color)
420 TV lines (B&W)
40 - 70 degrees
2 - 3 lux
54
VIDEO MONITORING
Video Systems
WAISTBAND-2
Body-Worn Covert Video System
Designed in a fabric belt and rated for covert body worn applications the system is VPCH
061 compact video transmitter-based unit for video-audio transmission via radio channel.
WAISTBAND-2 has special pockets for video transmitter, rechargeable battery and
antenna set.
Video transmitter set includes the external microphone and video camera connector.
Black-and-white or color video cameras with various types of camouflage can be applied
to the system.
Body-worn antenna consists of two radiating units - the frontal and the rear one to
reduce disruption of video when the operator moves.
Audio and video reception is available with the use of ENDOACUSTICA EUROPE PRM TV
special FM tuner or with the use of ENDOACUSTICA EUROPE CYCLONE Control Case
system.
WAISTBAND-2 is compatible with KDK 003 RC receiver. This enables the system to be
operate with CYCLOP Control Case equipped with DPK 003 RC unit.
Complete set:
1. Video transmitter.
2. Video camera.
3. Microphone set.
4. Body antenna “Karat”.
5. Rod antenna.
6. 3.7 V Li-POL rechargeable battery.
7. Charger.
8. Fabric waistband.
Fabric waistband
Video camera
Fabric waistband
Microphone set
Video transmitter
Body antenna “Karat”
VIDEO MONITORING
Video Systems
Rod antenna
Rechargeable battery
SPECIFICATIONS:
Operating frequency
Frequency control
(including audio subcarrier)
Modulation
Supply voltage
Supply voltage of the connected camera
from video transmitter)
Current consumption of the connected
camera
Current consumption
(at 3.6 V) (no camera)
Output power (at 3.6 V)
Video TX Dimensions
Charger
1010 - 1070 MHz
Synthesizer
-6
(relative instability no more 5 x 10 )
FM
3 – 4.5 V
9 – 10 V
No more 140 mA
No more 400 mA
No less 0.4 W
72 x 39 x 11 mm
56
VIDEO MONITORING
Video Systems
VIDEOBOD
Digital Video TX-RX System
VideoBOD Digital Video Transmitter-to-Receiver System is designed for transmission of
Video and Audio data from moving objects and high-quality reception of such signal.
VideoBOD consists of a compact portable Transmitter and a Receiving multifunctional
Case (Control Case).
Video Transmitter
Control Case
The principle of operation of VideoBOD is based on a classical diversity reception method
combined with improved digital signal processing and error correction algorithms.
The TX unit digitize and compresses the signal using the WAVELET intraframe video
compression method, which excludes interdependence of neighboring frames. This
method enables quick picture recovery in case of radio-signal errors.
The diversity reception is provided by the special Receiver with four independent
receiving channels and data processors, combined with space distribution of the receiving
antennas.
The combining processor gathers information from the four channels and forms the
output signal containing less errors. The used data redundancy (20%) helps to correct
possible radio errors.
The Transmitter is designed in a firm metal housing suitable for body-worn application
with internal rechargeable battery, inputs for video and audio signals, external antenna
and external power supply inputs.
The Receiving complex set up in a PELI 1450 case consists of video receiver, VideoWalkman recorder with LCD screen, internal rechargeable battery, signal quality and
errors indicators. The Receiver includes outputs for antennas, external power supply
connector and Audio/Video outputs.
Features:
- Capable of receiving multipath transmission signal.
- Transmission of video from moving vehicles.
- Stable functioning inside buildings in metropolitan area.
- Low power consumption and heat emission.
- Internal Li-POL power supply.
- Snapshot function.
- Unique coding and transmission algorithm different from common standards.
57
VIDEO MONITORING
Video Systems
SPECIFICATIONS:
Frequency
Power output
Modulation
Antenna connector type
Spectrum width
Power supply
Supply voltage
Power Consumption
Weight
Heating temperature under normal
conditions
Dimensions
Frequency
Sensitivity
Modulation
Channels qty.
Reception method
Power supply
Outputs
Antenna connector type
Signal quality indication
Errors indication
Receiver weight
Control Case weight
Dimensions of receiver with case
Control Case Dimensions
TV Fields per second
Compression type
Resolution
Video standard
TRANSMITTER
1000 - 1200 MHz
No less 450 mW
GMSK FM
SMA
7.5 MHz to -20 dBc
External rechargeable
7.2 V (6 – 12 V)
No more 4 W
250 g
No more 40 degrees C
114 x 54 x 18 mm
RECEIVER
1000 - 1200 MHz
-85 dBm
GMSK FM
4
Diverse parallel with error correction
12 V, 1 A
Audio/Video
SMA
LED, 8 Levels
LED, 8 Levels
2 kg
12 kg
295 x 121 x 45 mm
406 x 330 x 174 mm
VIDEO PATH
50
Wavelet
720 x 576 pixels
PAL
58
VIDEO MONITORING
Video Systems
Bandwidth
Dynamic range
Channels qty. (Audio type)
ADC capacity
Sampling rate
AUDIO PATH
200 Hz – 6 kHz
65 dB
1 (mono)
16 bit
16 kHz
59
VIDEO MONITORING
Video Systems
VM 010
Video Modem
VM 010 video modem is rated for transmission of audio and video signals from B/W and
Color CCTV cameras via radio channel.
Video modem is designed in the crush/water-proof milled metal case with connectors for
external antenna, and peripheral equipment. VM 010 is protected against antenna short
circuit, it will not be disabled if antenna is missing or antenna cable is damaged.
The modem is recommended to use as part of stationary Video-monitoring or repeater
systems.
VM 010 has an output power control function. Signal receiving is performed with PRM-TV
FM tuner produced by ENDOACUSTICA EUROPE.
SPECIFICATIONS:
Frequency
Frequency control
Relative instability
Modulation
Carrier frequency drift
Supply voltage
Output power
(at power supply 12 V, at load 50 ohm)
Current consumption (at U = 12 V)
Audio subcarrier
Dimensions: with radiator (no radiator)
1010 - 1020 MHz
Synthesizer
-6
No more 100 x 10
FM
+/-6 – 7 MHz
7.2 - 14 V
0.5 / 1.5 / 3 / 5 W
No more 1000 mA
7.5 MHz
No more 97 x 50 x 12 (x 23) mm
60
VIDEO MONITORING
Video Systems
STEPPE
Remote Video Monitoring System
The system is rated for FM reception, recording and playback of video data from the
wireless remote-controlled video camera.
Transmitting Part
Receiving Part
The transmitting part of the system consists of video camera (in all-weather housing)
equipped with zoom lens, pan and tilt mechanism, video and telemetry TX module, and a
set of antennas. The video and telemetry TX module is presented by video modem (with
output power control function), video signal encryption system.
The receiving part is a Control Case consisting of video RX module, RC unit for camera
and pan-and-tilt mechanism. Video signal reception is performed by the internal video
tuner. The received video is recorded to the built-in SONY video recorder.
Features:
- Transmission of video signal and telemetry data up to 10 km distance.
- Digital quality.
- Wireless remote control of the camera (zoom in, zoom out) and pan-and-tilt
mechanism (up, down, left, right), and the TX system ON/OFF function.
- Variable control speed.
- Three preset positions of video camera, zoom and focus.
SPECIFICATIONS:
Operating frequency
Video modem output power
Supply voltage of TX part
Telemetry channel frequency
Power supply of RX part
Operation distance (at direct visibility)
1010 – 1220 MHz
1–5W
12 V
140 – 150 MHz
12 V rechargeable battery;
12 V car electrical system;
220 V mains
Up to 10 km
61
VIDEO MONITORING
Video Systems
VIDEO DELAY SYSTEM
Main function is video and audio delay.
The system is rated for display of events prior to the recording start moment.
Compatible with standard video recorders and motion detectors.
SPECIFICATIONS:
Video and audio delay
Video system
Audio quality
Dimensions
Analog inputs
Analog outputs
Power supply
1.5 - 6 sec.
PAL
24 kHz (mono)
100 x 80 x 20 mm
1 video RCA, 1 audio RCA
1 video RCA, 1 audio RCA
from 5 to 15 V
62
VIDEO MONITORING
Video Cameras and Lenses
VIDEO CAMERAS
Miniature B&W and Color Video Cameras
with Low Power Consumption
The video cameras are produced in different form-factors: BOX version and RIBBON
version (remote CCD sensor).
BOX version can contain 27 x 27 mm size cameras. The BOX housing has special holes
for easy-mounting and a firm cable connector.
RIBBON version is a flat camera consisting of two blocks (remote CCD sensor with lens
and camera electronic controller unit) sealed with protective compound and connected
with a multicore flexible cable. Due to its flat form and small dimensions the CCD sensor
can be installed into objects and piece of clothing with limited dimensions.
Box Version
Ribbon Version
Various types of cameras available: B&W and color with different resolutions, Day/Night
camera which is color at sufficient lighting and goes B&W (TV-lines qty increased to 600)
if lighting is reduced.
Both BOX and RIBBON form-factors have connectors for external recorder and power
supply.
Cameras can be equipped with various types of lenses with different viewing angles.
The cameras are rated as standard units for use with different types of user-made
camouflage. Tools for camouflage production are available upon customer’s order.
Standard camouflage:
- Jacket button;
- Shirt button;
- Screw head;
- Necktie.
Jacket button
Shirt button
Screw head
Necktie
63
VIDEO MONITORING
Video Cameras and Lenses
The cameras are compatible with FARAON video-recorder, VPCh 041 video TX and other
TX of VPCh series (with 4-pin connector) of ENDOACUSTICA EUROPE production.
SPECIFICATIONS:
1/3"
B/W
1/4"
color
Resolution
420 TV-lines
380 TV-lines
Sensitivity
(at F 2.0)
0.05 lux
0.5 lux
1 Vp-p
composite,
75 ohm
12 V
1 Vp-p
composite,
75 ohm
12 V
1/3"
Day/Night
560 TV-lines
(color);
600 TV-lines
(B/W)
color – 0.2 lux;
B/W – 0.005 lux
1 Vp-p
composite,
75 ohm
12 V
100 mA
90 mA
130 mA
CCD sensor
Video out
Power supply
Current
consumption
1/3"
B/W
600 TV-lines
0.005 lux
1 Vp-p
composite,
75 ohm
12 V
100 mA
64
VIDEO MONITORING
Video Cameras and Lenses
PINHOLE LENSES
for B&W cameras
Focus, mm
Relative aperture
Resolution, cycles/mm
- center
- edge
Inlet diameter, mm
Maximum angular field
of view, degrees
Horizontal angular field
of view for CCD
cameras, degrees
- 1/2"
- 1/3"
- 1/4"
Distortion for CCD
1/3", %
Optical transmission
Minimum back length
while focusing at
infinity, mm
Length correcting
filter, mm
Maximum offset of the
diaphragm in front of
the lens, mm
Dimensions, mm:
- Diameter
- Height
Mounting thread
LTV
18
(no
cone
nozzle) nozzle)
17
17
1:5.6
1:0.3
LTV
18
(cone
LTV
3-90
LTV
12
LTV
15
LTV
16
LTV
19
LTV
215
LTV
315
3.1
1:3.2
3.3
1:2.2
3.1
1:2.6
4.4
1:5.5
3.0
1:3.7
3.1
1:2.6
3.1
1:2.6
70
45
1.0
100
70
1.5
130
70
1.2
70
45
0.8
135
80
3.0
135
80
5.7
150
85
0.8
130
70
1.2
130
70
1.2
130
125
144
80
25
25
150
144
144
88
67
85
58
90
62
60
45
17
16
13
16
13
93
65
90
62
90
62
30
20
25
9
1.7
1.7
25
25
25
0.90
0.85
0.85
0.8
0.85
0.85
0.85
0.85
0.85
3.0
2.5
3.4
1
3.25
3.5
3.4
3.4
3.75
3.75
3.75
3.75
3.75
3.75
3.75
3.75
3.75
0.3
0.5
0.15
2.5
1.6
3.35
0.15
0.15
0.15
М9х0.5
М7х0.5
7.3
12
11
11
6.8
11
27
25
6.8
М12х0.5 М12х0.5
М12х0.5 М12х0.5 (М13х1) (М13х1) М12х0.5 М12х0.5 М12х0.5
3.3
8.0
LTV 3-90
LTV 12
LTV 15
LTV 16
LTV 18
LTV 19
LTV 215
LTV 315
65
VIDEO MONITORING
Video Cameras and Lenses
PINHOLE LENSES
for B&W and COLOR cameras
Focus, mm
Relative aperture
Resolution, cycles/mm
- center
- edge
Inlet diameter, mm
Maximum angular field
of view, degrees
Horizontal angular field
of view for CCD
cameras, degrees
- 1/2"
- 1/3"
- 1/4"
Distortion for CCD
1/3", %
Optical transmission
Minimum back length
while focusing at
infinity, mm
Length correcting
filter, mm
Maximum offset of the
diaphragm in front of
the lens, mm
Dimensions, mm:
- Diameter
- Height
Mounting thread
LTV-5
LTV
5
LTV
13
LTV
14
LTV
25
(cone nozzle)
9.0
1:2.7
4.9
1:2.5
6.0
1:2.6
25
1:5,6
LTV
25
(no cone
nozzle)
25
1:3
100
80
3.3
125
60
1.95
140
80
2.3
130
100
3.0
130
100
6.2
53
92
89
14
14
40
30
23
63
38
62
46
31
11
-
11
-
5
20
9
0.5
0.5
0.85
0.80
0.85
0.85
0.85
8.5
6.22
5.7
26
26
3.75
3.75
3.75
3.75
3.75
2.5
1.0
0.8
1.6
3.5
14
М12х0.5
(М13х1)
10
М12х0.5
(М13х1)
11
10
М12х0.5
(М13х1)
12
36.4
12
33.4
М12х0.5
М12х0.5
LTV-13
LTV-14
66
VIDEO MONITORING
Video Cameras and Lenses
DECOR
Changeable Camouflage Set for Miniature Video Cameras
The camouflage set is rated for covert video monitoring.
Decor consists of RIBBON-type video camera, a set of interchangeable camouflage
solutions, and a set of tools for production of user-designed unique camouflages.
RIBBON-type camera can be produced as B&W or color camera with different resolutions,
Day/Night camera which is color at sufficient lighting and goes B&W (TV-lines qty
increased to 600) if lighting is reduced. It can be equipped with various types of lenses
with different viewing angles. For more information and specification please see the Video
cameras and lenses section.
Special feature of the DECOR is a set of interchangeable camouflages: Screw-head,
Brooch, Badge, Jacket/Shirt button, Necktie which can be easily installed to the camera
and used in various situations. Decor also includes a special set of tools for production of
user’s unique camouflages.
The cameras are compatible with FARAON video-recorder, VPCh 041 video TX and other
TX of VPCh series (with 4-pin connector) of ENDOACUSTICA EUROPE production.
Ribbon-type video camera
Set of interchangeable camouflage solutions
67
VIDEO MONITORING
Video Cameras and Lenses
LEPTONAR 30
Camcorder Pinhole Lens
LEPTONAR-30 is a pinhole lens rated for video recording through an aperture with a
diameter less than 1.5 mm.
L30 pinhole lens
Fastening bush with the
screw
Zoom MAX
Transitive rings
Output drilling tool
Zoom MIN
The lens is screwed instead of optical filter to a standard video camera. Special ringadapters are used to install the lens on the camera. The set of ring-adapters included in
the set are compatible with most types of camcorders.
Camera «ZOOM» function available. Viewing angle is 30 - 60 degrees.
Due to optical peculiarities of the lens the recorded picture is turned upside down. In
order to avoid the flipped playback of the video data it is recommended to turn the
camera upside down while installing it at the shooting location.
SPECIFICATIONS:
Viewing angle
Thread diameter
Adapter rings thread
(external diameter)
Pin-hole diameter
Dimensions
30 - 60 degrees
25 mm
36 mm,
30 mm (2 different thread steps),
27 mm
1.5 mm
diameter 25 x 48 mm
68
VIDEO MONITORING
Video Recorders
PHARAOH
Professional Compact Video Recorder
PHARAOH compact video recorder is designed for covert/overt audio-video recording on
mini DV cassette.
The recorder consists of two main blocks: recorder block and power supply block.
Recorder block is equipped with connectors for video camera, stereo microphone with
preamplifier, control unit, power supply and audio/video connector for connection of
external re-recording or playback equipment.
Power supply block contains a compartment for Li-Ion rechargeable battery, connection
cable to Video recorder and a power switch.
Features:
- Super compact design, black milled case.
- Joint operation with various external video cameras.
- High-quality stereo.
- Radio/Wire Remote Control function.
- Vibro acknowledgement of started recording and end of tape event.
- Solid connector sockets with latching.
- Original SONY IR Remote Commander provides access to the main functions of the
recorder.
Complete set:
1. Video Recorder.
2. Power Supply Unit.
3. Wire RC unit.
4. Audio-Video harness.
5. IR remote control.
6. 7.2 V, 5 W/h Battery pack.
7. 8.4 V/1.5 A AC/DC adapter.
8. Audio-Video cable.
Video Recorder
Video Recorder (open)
Power supply unit with battery pack
Wire RC unit
69
VIDEO MONITORING
Video Recorders
Audio-Video harness
IR remote control
AC/DC adapter
Audio-Video cable
Complete set package
SPECIFICATIONS:
Recording medium type
Recording time DV M80
Power supply:
- Lithium ion battery
- AC/DC adapter
Dimensions
Mini DV
80 min.
7.2 V; 5 W/h.
8.4 V, 1.5 A
99 x 65 x 34 mm
70
VIDEO MONITORING
Video Recorders
PHARAOH-2
Professional Compact Video Recorder
with Wireless RC Function
PHARAOH compact video recorder is designed for covert/overt audio-video recording on
internal hard-disk.
Unique combination of small dimensions, excellent performance, variety of supplied and
optional functions makes this unit indispensable for professionals.
Features:
- High-quality Video recording.
- High-quality Audio (external stereo microphone).
- Compatible with different types of video-equipment and video-cameras with 5V-12V
supply voltage (powered from Pharaoh-2 power supply).
- Wireless RC with feedback confirmation function.
- Playback available on external monitors.
- Internal Li-POL rechargeable battery power supply.
The Recorder is designed a milled metal case with control buttons and LEDs indicating
operation modes.
PHARAOH-2 is equipped with wireless RC with ON/OFF, REC/STOP functions.
Recorded data is downloaded to the PC via the Docking station (included in the package).
Complete set:
1. Video Recorder.
5. Docking station.
4. IP remote control (one button REC/STOR control).
2. Wireless RC.
3. Audio/Video cables.
6. AC power adapter (8.4 V, 1.5 A).
7. USB-cable.
Video Recorder
Docking station
71
VIDEO MONITORING
Video Recorders
IP remote control
Audio-Video cable
AC/DC adapter
Complete set package
SPECIFICATIONS:
Video compression method
Storage device
Video standard
Recording time
Operation time from internal power supply
(with CCD camera)
Dimensions
Weight
Battery type
MPEG 2
60 GB HDD
PAL-Color
HQ mode not less 880 minutes
2.5 hours
90 x 65 x 20 mm
200 g
Li-POL 7 x 4 V, 1 x 3 A/h Rechargeable
72
VIDEO MONITORING
Video Concealment Systems
SAFELOCK
Video Encryption/Scrambling
SAFELOCK uses advanced digital technology to provide secure video images over both
cable and RF transmission preventing interception.
These miniature devices simply need to be installed in the video line to produce a
scrambled image using the cuts and rotate method. The scrambler is installed between
camera and transmitter; the decoder – between video tuner and monitor.
When used in RF applications the traditional problems of noise causing the system to fail
have been eradicated, producing a very stable platform for trouble-free use.
Features:
- Ultra small size.
- Low power consumption.
- Scrambling: cuts and rotate method.
- Compatible with any existing CCTV equipment.
- Unique digital key, individual or group.
- Possible RF noise do not affect final decoded image.
Complete set:
1. Encoder.
2. Decoder.
Encoder
Decoder
Scrambling Image
Descrambling Image
SPECIFICATIONS:
Digital key
Video in/out
Video standard
In/Out impedance
Current consumption
Supply voltage
Working temperature range
Dimensions
128 bit
composite
PAL/NTSC
75 ohm
65 mA
7 - 15 V
form -10 to +70 degrees C
61 x 41 x 7 mm
73
VIDEO MONITORING
Date/Time Generators
TITRE
Multi-Channel Intelligent Display Data Administrator
TITRE is designed for joint application with PAL/SECAM/NTSC Color and B&W video
cameras. TITRE provides informational enhancement of the displayed video image adding
the following display options:
- Current Time (HH; MM; SS) and Date (DD; MM; YY);
- Camera Identifier (0…9 numeral and an ABC character)
- Power supply voltage (+ 18.60 V) with 1% accuracy
- 4 mnemonic symbols corresponding to 4 discrete inputs
Features:
- Automatic NTSC ID.
- Display Data ON/OFF.
- Easy to preset Date and Time.
- Wide range (+7.5 V up to +18 V) of operational supply voltage.
- Low power consumption (25 mA when connected to a TV - LF VIDEO IN).
- Dual Power System Clock.
- Nonvolatile Mnemonic Symbols Memory.
- Uploaded User Mnemonic Symbols.
TITRE system includes two controllers: operating controller and backup controller.
Operating controller is designed to control video-signal structure, adapt to horizontal
frequency of the used camera, collect information and display it on the screen. It also
controls time.
Backup controller is designed to control digital sensors status, and duplicate time control.
SPECIFICATIONS:
Power supply
Battery
Dimensions
DC 6-15 V
CR2410-50
51 х 47 х 12 mm
74
VIDEO MONITORING
Pan-Tilt Mechanisms
MARSHALL
High Tech Pan & Tilt Mechanism
The unique motorized pan and tilt mechanisms are specially designed for zoom pinhole
lenses. They pan either back and forth or up and down or both at approximately 120
degree angle each axis. Recommended lenses are the motorized pinhole lenses, the VZPL06MZ and V-ZPL1050MZ. With these lenses plus this unique mechanism, you can pan
and tilt your camera and zoom in and out to a particular subject at 4 – 20 mm (VZPL06MZ) or 10 – 50 mm (V-ZPL1050MZ) range. Units work with 5 VDC of power @500
mA (not included) and are capable of lifting up to a 100 g camera.
75
RC RADIOLINKS
RC Transmitters
DPK 003
Multi-Channel Remote Control
Multi-Channel Remote Control is rated for radio control over complexes of equipment.
The product is designed in a metal case with push buttons, LED indicator, Power switch
and SMA-connector for antennas.
Transmission time of a command is fixed (2-3 seconds), it does not depend on how long
the button is hold down. If LED indicators flash as a moving bar, it corresponds to the
output power presence and indicates transmission of a command.
Channel number is indicated by the digital single-digit LED indicator. The preset channel
number is saved in the memory. Code set applied in the RC unit is unique. It is
preprogrammed for a particular configuration of the execution units.
Optional extra functions for the DPK 003 remote control are available according to a
special order of the customer.
The RC unit is protected against antenna short circuit, it will not be disabled if antenna is
missing or damaged.
Operation distance of the RC unit can be increased with use of external rod-antenna with
magnetic pedestal.
DPK 003 is compatible with RC receivers KDK 003 and KDK 003 M (ENDOACUSTICA
EUROPE products).
SPECIFICATIONS:
Frequency
Output power
Modulation
Quantity of control channels
Supply voltage
Current consumption:
- standby mode
- transmission mode
Dimensions (without antenna)
140 - 150 MHz
No less 0.45 W
FM
8
9 V battery
No more 1 mA
No more 165 mA
115 x 63 x 25 mm
RC RADIOLINKS
RC Transmitters
DPK 006
Multi-Channel Remote Control
Multi-Channel Remote Control Unit based on communications
transceiver is rated for radio control over complexes of
equipment.
The multi-channel remote control is a modified ICOM
communications transceiver completed with extra keypad.
Transmission time of a command is fixed (2-3 seconds), it does
not depend on how long the button is hold down.
Transmission of a command is accompanied by a regular
indication of the radio set. The buttons located on the AUX
panel have special preprogrammed functions.
Increased output power enables the RC unit to control the
remote equipment at big distance.
Code set applied in the RC is unique. It is preprogrammed for a
particular configuration of the execution units.
Optional extra functions are available according to a special
order of the customer.
DPK 006 is powered from the regular rechargeable battery
supplied with the communications transceiver. The battery can
be charged with the use of BC-119 charger.
The RC operation distance can be increased with use of
external rod-antenna with magnetic pedestal.
SPECIFICATIONS:
Frequency
Output power
Modulation
Quantity of control channels
Supply voltage
Dimensions (without antenna)
140 - 150 MHz
Up to 5 W
FM
12
7.2 V rechargeable battery
150 x 55 x 30 mm
77
RC RADIOLINKS
RC Systems
KEY-FOB
RC System with Confirmation Feedback
The system is rated for short-range remote control over various devices requiring
confirmed acknowledgement of the fact that executive command is received successfully.
Features:
- Stable RC channel;
- Application of special noise-combating digital codes;
- Low current consumption of the RC receiver in standby mode;
- Small dimensions of the unpacked receiver module;
- Protection against non-authorized use in terrorist and other purposes.
Complete set:
1. Remote control transmitter.
2. Remote control receiver.
Remote control transmitter
Remote control receiver
Remote control transmitter is designed in a standard four-button car-alarm key-fob case.
The RC receiver is designed as an unpacked module.
Remote control system is capable to process 4 executive instructions (4 buttons on the
RC panel) that provides either simultaneous control over 4 independent devices
(equipped with receivers) or the control over one device with four control channels. As
soon as one of the buttons is pushed the appropriate executive instruction is transmitted
to the receiver.
Successful reception of the instruction is confirmed by the vibrator unit, which is built in
the RC unit.
SPECIFICATIONS:
Range of operation
Quantity of control channels
Power supply (RC transmitter)
Power supply (receiver)
Current consumption of the transmitter in
stand-by mode
Current consumption of the receiver in
stand-by mode
Up to 30 m
4
2 x VARTA 357
4 - 15 V
No more 5 μA
No more 1.8 mA
78
RC RADIOLINKS
RC Systems
Control channels:
- logic control
- power control (up to 500 mA)
Dimensions of the receiver
(without antenna)
4
1
16 x 32 x 5 mm
79
RC RADIOLINKS
RC Receivers
KDK 003, KDK 003M
Remote Control Receiver
The Remote Control Receiver is rated for application in the structure of the radio
controlled products.
Remote Control Receivers are designed both as unpacked PCBs and in a small metal case
with flexible external antenna, power supply and load leads.
KDK 003
KDK 003M
The receivers are rated for joint operation with ENDOACUSTICA EUROPE RC transmitters
DPK 003 and DPK 006.
KDK 003 M model is specially designed for use with high-power TX-systems. It has
special filters protecting from TX-systems’ emissions which could affect the RC command
reception, and can operate with 1.5A current drain.
Each Remote Control Receiver is equipped with its individual digital code.
Small dimensions allow to apply various kinds of camouflage for the product combined
with ENDOACUSTICA EUROPE ultra-compact radiomicrophones.
KDK 003 auxiliary control outputs provide effective use of the product in the structure of
sophisticated systems where remote control over various parameters (output power,
frequency, microphone sensitivity etc.) is essential.
SPECIFICATIONS:
Frequency
(defined by crystal resonator)
Sensitivity
Transmission bandwidth
Supply voltage
Current consumption
(at 3 V):
- standby mode
(mean value)
KDK 003
KDK 003 M
140 - 150 MHz
No less 0.5 µV
2.5 kHz
2.2 – 3.6 V
4.5 - 15 V
No more 120 µA
80
RC RADIOLINKS
RC Receivers
- operation
(pulse value)
Load current at U = 3 V
Dimensions
(without antenna and power
supply leads)
No more 3.5 mA
No more 3 mA
100 mA
33 x 19 x 5 mm
1500 mA
80 x 40 x 5 mm
A special 4-cnannel Video Switchboard similar to KDK 003 M is designed to control Video
transmitters with 4 cameras. The Switchboard allows to switch power and video-outputs
of the 4 cameras from the RC. The unit can be joined with other 4-cnannel Video
Switchboards (using one of the four video-connectors) in a cascade manner and contain
up to 16 channels. The Switchboard may be used as Audio switchboard.
The 4-channel Switchboard designed as an unpacked PCB is installed in the slot on the
KDK 003 M RC receiver board.
Video Switchboard
Switchboard SPECIFICATIONS:
Supply voltage
Current consumption
Quantity of channels
Switched load current
Dimensions
9 - 15 V
No more 30 mA
4
Up to 0.5 A
80 x 40 x 8 mm
81
AUDIO RECORDERS
Digital Voice Recorders
PAPYRUS-II
Stereo Digital Voice Recorder
PAPYRUS digital recorders are designed for professional audio stereo/mono recording
through one built-in or two remote microphones.
Depending on the model PAPYRUS recorders are capable to record up to 76 hours mono
or 38 stereo.
Playback of the recorded information is available with the use of a special USB cable that
provides hi-speed download of the recorded contents from the unit to a PC as WAV-files.
These files can be played back by any Windows multimedia application.
If the recorder unit is lost or stolen, NOBODY except the owner of the product can review
the recorded contents without individual USB cable and user programmed PIN code!
Features:
- Excellent Audio quality - High Dynamic Range of the recorded audio.
- Invisible for recorder detecting equipment - No moving parts.
- Invulnerable - Metal case provides excellent screening against recorder suppressing
equipment.
- Built tough - Milled metal case provides reliable protection of internal circuitry against
mechanical damage.
- Extra long operation from 2 cells - 40 hours of continuous stereo recording.
- Extreme - ready to operate in extreme acoustic environments wide dynamic range of
recorded acoustics signals.
- Hi-level security - Nobody can access the recorded contents except the owner (ex. the
recorder is lost or stolen).
- User defined efficiency / time of recording - Time of recording and sound quality can be
balanced at the choice of the user.
- Super high rate of data transfer - 1 hour of the recorded contents transferred to your
PC only in 1 minute!
- External and built-in microphones - Automatic selection of the built-in and the external
microphones.
- Super flat design.
Complete set:
1. Digital Voice Recorder.
2. Stereo microphones.
3. USB docking station.
Digital Voice Recorder
Stereo microphones
USB docking station
82
AUDIO RECORDERS
Digital Voice Recorders
SPECIFICATIONS:
MODEL
FLASH memory capacity
Recoding time (hours) at
various sampling rates:
- 24 kHz
- 16 kHz
- 8 kHz
Dynamic Range
Power Supply
Current consumption at
REC mode
Operation time
(no less), hours
Download to PC time
Dimensions
II-256K
256 Mb
Stereo
Mono
3
4.5
9.5
6
9.5
19
II-512K
512 Mb
Stereo
Mono
6
9.5
19
12,5
19
38
II-1G
1 Gb
Stereo
Mono
12,5
19
38
25
38
76
30
36
86 dB
2 x AAAA
No more 15 mA
30
36
15 min.
30
36
30 min.
95 x 50 x 12 mm
60 min.
83
AUDIO RECORDERS
Digital Voice Recorders
PAPYRUS-MINI
Ultra Compact Digital Voice Recorder
Ultra Compact Digital Voice Recorder is designed for professional audio recording.
The recorder is designed as an unpacked PCB with built-in microphone and power supply
holder.
Playback of the recorded information is available with the use of special Data Transfer
Adapter that provides hi-speed download of the recorded contents from the unit to a PC
as WAV files.
Features:
- Ultra compact design;
- Extremely high audio-signal dynamic range;
- Programming of the recording functions and quality from PC;
- Voice Activation function;
- Built in timer;
- Recorder Start scheduling;
- Secret user pin-code;
- Color LED indication of the battery life.
Complete set:
1. Digital Voice Recorder.
2. USB docking station.
USB docking station
Digital Voice Recorder
SPECIFICATIONS:
Built-in flash memory capacity
Time of recording
at sampling rates:
- 128 Mb (24/16/8 kHz)
- 256 Mb (24/16/8 kHz)
Dynamic range
Power supply
Current consumption in recording mode
Time of continuous operation
Time of total data transfer to the PC
Dimensions
128/256 Mb
3/4.5/9 hours
6/9.5/19 hours
86 dB
2 x V357
No more 11 mA
No less 12 h.
15/30 min.
54 x 32 x 8 mm
84
RADIOS AND ACCESSORIES
Radios
MARTEN-3, MARTEN-4, MARTEN-5
Mobile Transceiver for Covert Applications
Designed in compliance with up-to-date technologies and STD-810 military standard the
transceivers are easy in-use and effective. The unit looks like two hinged metal cases battery container and transmitter case. The transceiver is equipped with reliable fixing
connectors for peripheral units, volume control and discrete channel selector. Protectorcase design ensures application of the product in the most extreme situations. Hinged
design and small dimensions (138 x 115 x 19 mm) facilitate covert installation of the unit
within clothes. The product is compatible with all types of transceivers (stationary,
portable, mobile, etc.). All transceivers are equipped with high-quality body-worn
antenna providing the best performance in mobile applications.
- Marten-3 – memory stores up to 16 channels, Spectrum Inversion encryption method.
- Marten-4 – memory stores up to 32 channels, Spectrum Inversion encryption method,
built-in speaker, PPT button.
- Marten-5 – memory stores up to 16 channels, Spectrum Inversion encryption method,
built-in speaker, PPT button.
Features:
- Smart and Easy in use.
- Availability of scrambler installation.
- Optimized antenna for body worn applications.
- Availability of various head-set connection (hidden, inductive, wireless, etc.).
- Availability of programming the transceiver from PC
- Battery saver function during transmission.
Marten-3
SPECIFICATIONS:
Bandwidth
Quantity of Channels
Channel spacing
Supply voltage
Output power
Marten-4
MARTEN-3
146 – 174 MHz
420 – 470 MHz
16
5/10/12.5/15/
20/25/30/50 kHz
7.4 V
2/5 W
Marten-5
MARTEN-4
146 – 174 MHz
400 – 440 MHz
450 – 490 MHz
32
12.5/20/25 kHz
MARTEN-5
146 – 174 MHz
400 – 470 MHz
7.5 V
0.1/1/2.5/5 W
7.2 V
4/5 W
16
12.5/25 kHz
85
RADIOS AND ACCESSORIES
Radios
Out-of-band emission
Max. Deviation
Sensitivity
(SINAD 12 dB)
Output power LF
Selectivity
Nonlinear distortion coef.
Intermodulation
selectivity
Temperature range
Dimensions
Weight
50 dB
60 dB
from -20
to +50 deg. C
55 x 100 x 16 mm
58 x 93 x 22 mm
238 g
65 dB
+/-5 kHz
0.2 μV
0.5 W
65 dB
No more 5.0 %
70 dB
from -30
to +60 deg. C
60 x 114 x 16 mm
58 x 109 x 20 mm
423 g
80 dB
65 dB
from -30
to +60 deg. C
53 x 114 x 16 mm
53 x 109 x 21 mm
248 g
86
RADIOS AND ACCESSORIES
Accessories
D-600
Voice Encryptor
D-600 voice signal encryptor is rated for joint operation with ENDOACUSTICA EUROPE
digital mobile transceiver Marten-5, and other transceiver models with digital channel
(Vertex, ICOM, MOTOROLA), equipped with VXSTD P/N P0091209 input.
The Encryptor contains one multi-digit ID-Key (max. Quantity of user Keys – 4 billion)
which can be changed with special RDM9 programmer and CONFIG software.
SPECIFICATIONS:
Method
Bitrate
Modulation
Carrier frequency
Data transfer rate
Confidence channel delay
Total ID-Key quantity
ID-Key per encryptor
(changeable)
AUDIO CODEC
Compounded linear prediction
2.4 kbps
MODEM
QPSK
1800 Hz
4.8 kbps
TACTICAL SPECIFICATIONS
No more 250 ms
4 billions
1
TECHNICAL SPECIFICATIONS
Supply voltage
+5 V
Current consumption
No more 33 mA
Current consumption in standby mode
No more 20 mA
Channel delay
250 ms
Dimensions
30 x 30 x 4 mm
Operating temperature range
from -30 to +60 degrees C
87
RADIOS AND ACCESSORIES
Accessories
WIRELESS HANDS-FREE INDUCTIVE HEADSET
Wireless hands-free headset for covert application with inductive connection is designed
for any occasion which demands mobility, urgency, communication security and comfort
of use.
Anyone from special service agents and VIP bodyguards to TV or theatre staff can use
Wireless hands-free headset with ease.
The headset can be applied to joint operation with radio stations and any types of mobile
phones.
The headset includes:
- PTT button.
- Miniature microphone.
- Inductor (Electromagnetic waves emission source).
- VM-1 / VM-2 / VM-3 Intra-ear acoustic receiver (Receives electromagnetic waves from
inductor and transforms the signal into sound).
Inductor embodiment:
- plastic bar;
- necklace (90 cm length);
- bluetooth.
Inductor "Plastic bar"
Inductor "Necklace"
Inductor "Bluetooth"
88
RADIOS AND ACCESSORIES
Accessories
VM-1, VM-2, VM-3 Intra-ear units are designed for receiving inductor signal.
Wireless hands-free headset can be equipped with intra-ear units of different size and
shape.
SPECIFICATIONS:
Maximum distance from
inductor
Power supply
Minimal time of operation
Dimensions
Weight
VM-1
15 cm
VM-2
10 cm
VM-3
10 cm
ZA10
50 hours
20 x 10.8 x 6.9
mm
2g
ZA5
70 hours
18.6 x 8.9 x 4.9
mm
1.6 g
ZA5
70 hours
14.1 x 7.7 x 3.9
mm
1.0 g
89
TRACKING SYSTEMS
Tracking Systems
KURS-2
Mobile GPS-GSM Tracking System
The tracking system is designed to perform remote tracking of mobile objects by
receiving GPS navigation data via GSM network (possible to use “Globalstar” satellite
network or ground-based radio systems VHF and UHF upon customer’s request).
The tracking system set consists of GSM-registrator, receiving equipment and special
software.
GSM-registrator
GSM-registrator is designed to collect navigation data from GPS module and transmit the
stored data via GSM. Transmission is performed via standard GSM DATA channel or via
Short Message Service (SMS). Transmission interval is user-defined.
GSM-registrator can be equipped with two connectors for external sensors and two
outputs for external execution units.
Special characteristic features of the GSM-registrator:
- Supersensitive navigator of the third generation;
- Internal Flash-memory for collecting navigation logs;
- USB-connector for high-speed data transfer;
- Internal power supply;
- Compatible with power supplies of various voltage (vehicle power supplies, air-plane
power supplies etc.);
- Ultra-compact design including GPS and GSM antennas;
- Water and dust proof case with easy mounting on different objects;
- Flexible power supply control for maximum battery life.
Current GSM-registrator settings are saved in nonvolatile memory (NVRAM).
Special geoinformation software (GIS) is used to store and display data received from the
GSM-registrator. The GIS may include maps of different regions (on customer’s request).
90
TRACKING SYSTEMS
Tracking Systems
Firmware interface
SPECIFICATIONS:
Maximum checkpoints
qty. stored in NVRAM
Power supply
Time of continuous operation:
- Constant data storage mode
- GSM DATA-channel
transmission mode
- GPS receiver OFF mode
- Power save mode
(time schedule mode)
Current consumption at Power Down mode
Charging time
of the internal rechargeable battery
Temperature range
GPS receiver type
Total data download time via USB port
Dimensions
(with no antennas)
65536
internal Li-Pol rechargeable
battery 3.7 V, 800 mA/h
external power supply 7.5 – 32 V, 0.5 A
up to 11 hours
up to 3 hours
up to 50 hours
up to 100 hours
no more 5 µA
Approx. 3 hours
from -30 to +80 degrees C
Antaris LEA-4H
Not more 120 sec.
60 x 41 x 21 mm
91
LEAK DETECTION SYSTEMS
Multiobjective Leak Detectors
ST 031P PIRANHA
Multifunctional Counter Surveillance Instruments
with Digital Interface
The ST 031 PIRANHA multifunctional counter surveillance instrument is intended for
implementation of arrangements for detection and localization of special technical means
(STM) used for secret acquisition of information, for revealing of natural and artificially
created channels for leakage of information as well as for monitoring of information
protection quality.
The instrument consists of the Main Control and Indication Unit, and a set of
Transducers, and is capable of operating in the following modes:
- HF detector/frequency meter, with the identification of GSM and DECT signals;
- Conducting line analyzer;
- Infrared detector;
- Low frequency magnetic field detector;
- Vibration transducer;
- Acoustic transducer;
- Low frequency differential amplifier.
The information is displayed on a liquid crystal screen with adjustable backlighting.
The instrument is controlled with the aid of a 16-key film keyboard. Sound output is
available via headphones or speaker. The instrument allows to process the received low
frequency signals in either oscilloscopic mode, or spectrum analyzer mode with a digital
representation of data. Its non-volatile memory can store up to 99 screen images.
On the screen, help can be displayed, available in both Russian and English. ST
031 can be powered from either 4 type AA batteries, or a power unit.
ST 031 is a portable unit. For handling and storage a special bag is used, tailored to
house all the components in a convenient way.
Digital Interface that provides the added features of:
- Operation with an IBM PC-compatible computer;
- Control of the scanning receiver;
- Software Upgrades.
Control of the scanning receiver (AOR8000, 8200, 5000).
The scanning receiver can be controlled while the instrument operates in the HF
detector/frequency meter mode, and conductive line scanning analyzer mode. The action
is based on tuning the receiving frequency of the scanning receiver, to match the
92
LEAK DETECTION SYSTEMS
Multiobjective Leak Detectors
frequency of the signal received. This may be performed automatically, when the
frequency is registered by the HF detector, or manually by the user. This feature allows
prompt checking of the detected signal, aided with the capabilities of a scanning receiver.
Operation with an IBM PC or PC-compatible computer.
For operation with an IBM PC or PC-compatible computer, a program specifically
developed for the purpose is used, that allows:
- The transfer of information from ST 031P's display on to the computer monitor;
- The creation of a database of graphic and audio files, that are being generated in the
process of operation with ST 031P in real time, or are retrieved from ST 031P's nonvolatile memory.
In mode of HF detector/ frequency meter identification of Bluetooth and Wi-Fi
signal is added.
For software upgrades (new versions, additional features), connect ST 031 via Serial Port
to your PC, and visit the manufacturer’s site; the instrument will be reprogrammed
automatically.
SPECIFICATIONS:
Radio frequency detector-frequency meter
Operating frequency range
30 – 2500 MHz
Sensitivity at input:
- 30 – 1000 MHz
no more 1 mV
- 1000 – 1800 MHz
no more 4 mV
- 1800 – 2000 MHz
no more 8 mV
Dynamic range
60 dB
Frequency meter sensitivity
no more 15 mV
Frequency measurements accuracy
+/- 0.01 MHz
Conductive wire lines scanning analyzer
Scanning range
0.01 – 15 MHz
Sensitivity for signal/noise ratio 10 dB
no more 0.5 mV
Scanning increment
5 (1) kHz
Scanning speed
50 – 1500 kHz/s
Band width
10 kHz
Selectivity as per neighboring channel
30 dB
Detection modes
AM, FM
Allowable mains voltage
600 V
Infrared radiation detector
Spectral range
770 – 1000 nm
-13
1/2
Threshold sensitivity
10
W/Hz
Angle of sight
30 degrees
Band width of detection
3 MHz
Low frequency magnetic fields detector
Frequency range
0.3 – 10 kHz
-5
2
Threshold sensitivity
10
A/(m x Hz )
Low frequency differential amplifier
Gain
22 +/- 1 dB
Input voltage noise
no more 2 μV
Dynamic range
no less 70 dB
Input impedance
no less 200 kOhm
CMRR
75 dB
Operating frequency range
200 – 8000 Hz
Maximum input voltage
no more 70 V
93
LEAK DETECTION SYSTEMS
Multiobjective Leak Detectors
Vibro-acoustic converter
Frequency range
0.3 – 6 kHz
2
Sensitivity
1 V x s /m
Intrinsic noise within the band of 0.3-3 kHz 50 uV
Acoustic converter
Frequency range
0.3 – 8 kHz
Sensitivity
no less 5 mV/Pa
Oscilloscope and spectrum analyzer
Band width
22 kHz
Sensitivity at the input
no more 10 mV
Metering error (of the upper limit)
1%
Oscillogram output speed
0.2 s
Spectrogram output speed
0.3 s
Power
Power supply (DC)
6 V (4 x AA)
220 V
Maximum consumed current
300 mA
Consumed current in operating mode
150 mA
Dimensions and weight
The principal control, processing and
180 х 97 х 47 mm
indication unit: overall dimensions
The principal control, processing and
0.8 kg
indication unit: weight
Complete set: overall dimensions
350 х 310 х 160 mm
Complete set: weight
not exceeding 5 kg
94
LEAK DETECTION SYSTEMS
Nonlinear Locators
LORNET
Portable Nonlinear Locator
LORNET is designed to locate electronic devices containing semiconductor elements. It is
used to scan indoor and outdoor areas, vehicles, etc. “LORNET” is equipped with auto
frequency selection function and is able to dejam interfering signal (according to low
noise criteria in receive chain of the 2
nd
harmonic).
Features:
- Small size, low weight, portable.
- Smart control. Simple in use.
- 2 modes: impulse and continuous.
- Automatic and manual power control of the probing signal.
- High quality materials. Ergonomic design.
- High detectability.
- Works with wireless headphones.
- Can be used in hard-to-reach areas (antenna thickness not more 18 mm).
SPECIFICATIONS:
Probing signal type
Signal power:
- impulse
- continuous
Sensitivity
(acc. to 2nd and 3rd harmonics)
Signal frequency
Dynamic range
Operating time
with internal power supply
if probing signal is set to max power:
- impulse
- continuous
Dimensions:
- packed
- unpacked and ready
Weight
impulse, continuous
15 W
1W
non less -120 dBm
880 - 906 MHz
over 80 dB
non less 4 hours
non less 2 hours
570 х 220 х 120 mm
1000 х 150 х 40 mm
less 1000 g
95
LEAK DETECTION SYSTEMS
Nonlinear Locators
LORNET-24
Ultra Compact Nonlinear Locator
LORNET-24 is designed to locate electronic devices containing semiconductor elements.
The locator is used to scan indoor and outdoor areas, vehicles, packages, people etc.
LORNET is equipped with auto frequency selection function and is able to dejam
interfering signal (according to low noise criteria in receive chain of the 2
nd
harmonic).
Features:
- Has no world analogues in frequency specifications, size (easy to carry in a pocket) and
weight.
- Smart control. Simple in use. Best for personal search.
- 2 modes: impulse and continuous.
- Automatic and manual power control of the probing signal.
- High quality materials. Ergonomic design.
- High detectability (high probing signal frequency gives better results than high power
locators with standard frequency).
- Works with wireless headphones.
- Can be used in hard-to-reach areas (antenna thickness not more 18 mm).
SPECIFICATIONS:
Probing signal type
Signal power:
- impulse with on-off time ratio50
- continuous
Sensitivity
(acc. to 2nd and 3rd harmonics)
Signal frequency
Dynamic range
Operating time
with internal power supply
if probing signal is set to max power:
- impulse
- continuous
Dimensions:
- packed
- unpacked and ready
Weight
impulse, continuous
15 W
1W
non less -108 dBm (if SNR =10)
2400 – 2483 MHz
over 80 dB
non less 4 hours
non less 2 hours
230 х 100 х 55 mm
390 х 100 х 40 mm
less 700 g
96
Endoacustica Europe
Catalogue
CONTACTS
Address:
Endoacustica Europe srl
Via Umberto Terracini, 47
70029 Santeramo in Colle (BA)
P.IVA IT06836020724
ITALY
tel. 0039 080 30 26 530
tel. 0039 080 43 73 08 93
fax 0039 080 40 73 11 87
Phone numbers:
+39 080 43730893
+39 080 3026530
Fax numbers:
+39 080 40731187
Website and E-mail:
www.endoacustica.com
info@endoacustica.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising