Ceramic Spool/Sleeve Pilot Valve
Ceramic Spool/Sleeve
Pilot Valve
Another Blend of Advanced Technologies
for the Water Hydraulics Industry.
Available Models:
405510 — Blocked Ctr. Dual Solenoid
405511 — P to A & B Double Solenoid
405512 — A & B to T Double Solenoid
405531 — Detented 4-way, 2-pos
Double Solenoid
405535 — 4-way, 2-pos P to A Single
Solenoid Spring Offset
405536 — 4-way, 2-pos P to B Single
Solenoid Spring Offset
Available voltages:
115VAC
240VAC
12VDC
24VDC
125VDC
ATEX 12, 24VDC
Others Upon Request
Contact Information:
Fluid Logic Valve Division
1001 Commerce Ct.
Buffalo Grove, IL 60089
www.fluidlogicvalve.com
For sales and technical questions
please contact Fluid Logic at:
Email: sales@fluidlogicvalve.com
Tel: 800 386 7822 or 847 459 3231
Fax: 847 459 2208
Double and Single Direct
Solenoid D03 Pilot Valves
Product Features:
• Standard pilot on every Parker
and Fluid Logic valve
• Ceramics are a chemically inert
material able to handle all makeup water chemistry
• Ceramics will not wire draw over
prolonged service
• Outstanding in water and low
viscosity service
• Extremely close tolerances allow
no filtration specifications
• Thermally stable up to 150º F
• Direct solenoid actuated
(elimination of air)
• Dry pin actuation eliminates
problems associated with
pressurized armature tubes
(residue build-up)
• Rectified coil to DC for 100% duty
cycle (Std 110 VAC)
• Stainless steel housing and
coil body
• Double and single solenoid styles
• Manual override standard
• Connector standard DIN 43650
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising