Key Features - Worldeyecam
4 Ch HD-TVI DVR + 1 OMNI IP* Bonus Ch
1080p @ 48FPS, 720p @ 120 FPS
Key Features
•Intelligent Video Inputs: connect 1080p/720p EZHD HD-TVI or 960H/SD
analog to ANY input at any time
-- Reuse existing analog cameras or choose any mix of HD/SD on new
-- Upgrade any analog camera to megapixel at any time
-- Superlative HD resolution of 1080p Full HD or 720p HD for amazing image
Useful digital zoom on live view and playback
Field select 1080p or 720p, 30/25 Hz or 60/50 Hz
•Operation over ‘almost any’ wire
-- More than 1000 feet on standard RG59 coax
-- More than 1500 feet on RG6
-- More than 500 feet on UTP (one pair from a Cat5e cable, using optional
KA-HDBAL1 balun pair).
•Display Live/Record 2.1 Megapixel 1920x1080 (1080p), 1 Megapixel
1280x960 (720p), 960x480 (WD1/960H), 704x480 (SD)
-- 1080p recording at up to 12FPS per camera
-- Real time recording on any/all channels at 720p, WD1 or SD resolution
-- Playback any/all cameras at up to record rate
-- Independent configuration for each channel: resolution main/sub-stream,
FPS, bit rate, image quality, etc.
-- Tag video of interest for easy retrieval or export
-- Play based on results of extensive event/alarm log search
-- Use “Smart Search” to define an area of interest; the DVR quickly reviews
recorded video to list instances of motion in that area for review by the
•Digital Zoom with Virtual PTZ in Live & Playback
•Privacy masking (4 zones) to block observation of specific areas within
the field of view
•Audio Input and Output for recording and/or two way audio
•Ethernet interface for remote network viewing and control, and to
connect an IP camera
•Multiple Control Inputs: local mouse/hand held IR remote controller (both
included); web browser and CMS controls
•On-screen PTZ control via mouse or IR remote
•USB 2.0 ports on front and rear panels for video archive and mouse
•Free DDNS Service – static IP address is not required for reliable remote
•IE, Chrome, Firefox and Safari browser Web clients
•Free Multi-Site Windows and MAC OMNI CMS can display up to 64 live/16
playback views
•Up-the-cable control [UTC] to access compatible camera OSD menus
•Remote configuration support from built-in web interface and/or free
•Triple Technology Recording: Connect additional OMNI-IP Plug-and-Play
•Free iOS and Android apps:
-- Scroll though single/quad display live views
-- Playback specific cameras by date/time plus easy slider control
-- Audio monitoring support
-- PTZ and relay control
-- Up to 16 camera views from HD tablets (HD app)
from the DVR PTZ controls (local or remotely)
cameras (4+1) up to 1080p resolution without sacrificing BNC inputs
•H.264 Compression for efficient HDD utilization
-- One internal hard drive for up to 4 Tb of internal storage
-- Up to 8 network disks (8 NAS disks, or 7 NAS disks +1 IP SAN disk)
-- Simultaneous high bandwidth recording plus sub-stream recording for
reduced bandwidth remote live viewing
OMNI CMS program
-- Watermarking for validation of recorded video
-- Record scheduling per-camera, with HDD quotas, holidays, parameter
change on alarm/event
•Pentaplex Operation (Simultaneous live, recording, playback, archiving
and remote viewing)
•Easy router setup for remote access: uPnP/NAT automatically sets up port
forwarding (router must support/allow uPnP)
•HDMI & VGA Main monitor outputs for up to 1080p HD display detail
•User friendly GUI with graphical icons, visual indicators and multiple
language support
-- Easy to use on-screen menus include digital zoom and instant playback of
recent video
-- Operate using front panel controls, wheel mouse or included IR remote
•Quickly locate and review event video
-- Search by date/time, or preview images by pointing along a color coded
timeline of record type
*ONLY OMNI-IP PnP IP Cameras are Supported for Bonus Channels
KT&C America reserves the right to make changes to improve our products at any time without notice; we are not responsible for misprints.
Analog EZHD/SD Inputs
HD Video Resolutions
Analog CVBS Video Input
Adaptive Ports
Video Inputs
Privacy masking
Additional OMNI-IP Plugand-Play Channels (up to
Total Cameras Supported
Video Compression
Video Bitrate
Frame Rate
Motion Detection
Schedule Period
Pre- and Post- Event
Synchronous Playback
Playback Resolution
Search Type
Playback Controls
Digital Zoom During
Event Source
Event &
Event Action Schedule
Event Action
MD Area
Alarm Source
Alarm Action
Two-way audio
Input / Output
Protocols Supported
User IDs
User Levels
User Privilege Control
HDD Storage
Storage &
Clip copy
Copy Type
Copy Device
EZHD / HD-TVI 720p30(25), 720p60(50), 1080p30(25)
Up to 960x480,720x480(NTSC); 960x576,720x576(PAL)
Input Format Auto Detection, EZHD/SD can be mixed
in any combination, at any time
BNC Connector; 1V p-p, 75Ω
4 areas programmable in OSD menu
4 Ch HD-TVI DVR + 1 OMNI IP* Bonus Ch
1080p @ 48FPS, 720p @ 120 FPS
Full HD 1920×1080/60Hz; SXGA: 1280×1024/60Hz;,
720P: 1280×720/60Hz; XGA: 1024×768/60Hz,
1, 2x2, 1+5, 1+7, 3x3, 4x4 split; User Defined Sequence / Alarm Pop-up
Dual Stream: H.264 for Main Stream and Sub-stream
32Kb/s~6Mb/s each channel
Main Stream: 1080p (virtual real time to 12FPS max
per camera); 720p; WD1; 4CIF; VGA; CIF
Sub Stream: WD1, 4CIF (virtual real time); CIF; QVGA;
Main Stream: 1/16 fps ~ Real time frame rate (real
time at 720p and lower resolutions)
Sub Stream: 1/16 fps ~ Real time frame rate
6 levels: Lowest/Lower/Low/Medium/Higher/Highest
Continuous; Motion; Alarm; Motion or alarm, Motion
+ Alarm
Configurable per camera for area(s), sensitivity and
arming schedule programmable by day of week and
hour of day
Per day in 1 hour blocks; or 8 time periods per day,
each with different record mode; plus holidays
Pre-record 0~30 seconds; post record 5s~10 minutes
4 channels
1080p, 720p, WD1, 4CIF, VGA, CIF, QVGA, QCIF
Time/Date; motion or log event; Manual Tags; Smart
Search for motion events from recorded video
Up to record rate
Play; Pause; Forward/Reverse; speed control for single~1.8~16X; Slide bar with overview of record type
and snapshot display from slider position
USB 2.0 Ports
Serial & I/O
Up the Cable Control
User Controls
Local Controls
Web Viewer
User Rights Control
Supported on Local Displays and CMS
MD (Motion Detection), Video Loss, Video Tampering/
Per day in 1 hour blocks; or 8 time periods per day,
each with different record mode; plus holidays
Buzzer, E-mail, Alarm Full Screen Pop-up, Notify CMS
User selectable grid pattern 22x15 areas with adjustable per camera sensitivity
HDD Error, HDD Full, LAN Fail/Address Conflict, Illegal
login, Video Signal Exception/, Record/Capture
Buzzer, E-mail, Notify CMS Client (network permitting)
Audio input pass through to remote web or CMS
client; remote audio from web or CMS client pass
through to audio output
1ch Input / 1ch Output; RCA, 2V p-p, 1KΩ
Up to 64Kbps, G.711u
10/100 Base-T Ethernet RJ-45
Static IP, DHCP, xDSL support
Supported; choice of time zone, NTP server, DST start/
iSCSI, UPnP™, HTTPS, KT&C Plug-and-Play (for connected IP Cameras), OMNI Utility Device Discovery
uPnP router NAT/port mapping forwards ports automatically (*Router must support/permit uPnP function)
Up to 128 simultaneous connected users
Simple DDNS free service tracks WAN IP address and
HTTP port
“Admin”, plus multiple configurable login IDs
All rights for “admin”; Per camera per user rights
assignment for Operator and User levels
Local and remote access to Live views, audio,
recording, playback, menus, PTZ, alarms, copy, logs,
upgrade, reboot
1 SATA HDD up to 4Tb
up to 8 network disks (8 NAS disks, or 7 NAS disks +1
IP SAN disk)
Multi-Channel or Single Channel File
USB 2.0 Drive (2 ports)
Temperature, duration, error rates, bad sector detection, and more
Mobile Viewer
Event Logging
Firmware Upgrade
Dimension (W x H x D)
Chassis Type
Weight without HDDs
Operating Temp
Operating Humidity
One front, one rear for mouse and data I/O
One; selectable speed and bit pattern; multiple
protocols (Pelco P, Pelco D, others)
Multiple protocols, can be sent out of any BNC port to
compatible cameras
Front Panel function and navigation buttons; IR
Remote; Mouse
Live view, playback and configuration via IE, Chrome,
Firefox, Safari (with free plug-in/extension installed)
Per user-per camera for multiple functions
iOS and Android supported ; live 1 & 4 camera views;
single camera playback; snapshots from live or play;
copy clips/record to smartphone; audio support;
PTZ control. HD version of app, optimized for tablets,
displays up to 16 live view cameras
Free PC and MAC Clients support multiple device
viewing, playback (with digital zoom) and configuration; user rights per camera; E-map support; live view
up to 64 cameras in 4:3 and 48 cameras in 16:9; up
to 16 cameras in playback
Multiple types: alarm, exception, operation, information; dozens of sub-types within each major type
From USB or remotely
From USB or remotely
12.4” x 9.5” x 1.8” | 315 × 242 × 45 mm
Standalone 1U chassis
3.3 lb. / 1.5Kg
14°F~131°F (-10°C~55°C)
10% ~ 90%
12VDC from included power supply, 4 pin DIN; power
supply input voltage 100~220 VAC 50~60Hz
Up to 15W
Ordering Information:
EZHD-TVL4/1TB: 4 Ch, 1 TB | EZHD-TVL4/2TB: 4 Ch, 2 TB | EZHD-TVL4/4TB: 4 Ch, 4 TB
*ONLY OMNI-IP PnP IP Cameras are Supported for Bonus Channels
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF