LT-200 LED Digital Controller - LIP

LT-200 LED Digital Controller - LIP
LT-200 LED Digital Controller
LT-200 LED Digital Controller
2.6 Supporting 2 output ports: green terminals and signal & power combination terminal (load 20A current)
LT-200
LED Digital Controller
2.7 Support third-party DMX512 interface, it can be realized DMX management mode, invoke controller's
most function by DMX console.
2.8 Work as DMX-SPI decoder, using DMX512 console to control every channel and program new changing
effect.
3. Configuration Diagram:
LT-200 controls LED with the following compatible ICs: LPD1101/6803/8803/8806, WS2801/2803/2811/2812,
MODE+: Long press to black color mode.
UCS1903/1909/1912/2903/6909/6912, TM1804/1809/1812, TLS3001/3002, P9813, D705.
MODE-: Long press to mode 31.
Supporting international standard protocol DMX512/1990 interface, with DMX administration mode to invoke
LCD 显示
the built-in functions for choosing mode, speed, brightness, types and direction changing by DMX512
console. Furthermore, it has the DMX decoder mode, customers could use DMX512 console to program
& control every channel of the LEDs with the compatible ICs listed above. (0-100% dimming range, program
any lighting effect required).
SETUP: Short press to adjust the mode direction. Long press to enter menu setting interface.
Built-in LCD operator display, powerful but simple easy to use. Two ways to adjust modes, speed & brightness
either by RF remote or controller itself.
FUN: Short press to switch changing type. Long press to ID learning process.
Controller
FUN
Short press: Switch 8 kinds of
mode types;
Long press: Switch 4 kinds of
mode directions.
ID Learning Method:
On/Off
1. Product Parameter:
LT-200 LED Digital Controller
FUN
button on the controller
Speed+/Speed–
for 2 seconds, there is a buzzer beep,
Brightness+/Brightness-
keep pressing:
108mm
Working Voltage:
Long press
Mode+/Mode-
12Vdc (with a power adapter)
Control Qty:
Power Consumption:
<2W
Working Temperature: -30℃~65℃
Scene-mode keys
Output Signal:
SPI(TTL)
Dimension:
L163×W125×H40mm
Press 2s to save current color
or changing effect
3rd Part Port:
DMX512
Package Size:
L269×W129×H46mm
Canceling ID:
Change Mode:
540 Modes
Weight (G.W):
820g
Press any key on the remote over 3s.
1024 Pixels
Learning ID:
Press any key on the remote in 3s.
2. Function Features:
2.1 Built-in a LCD screen, simple to set up parameters.
2.2 Built-in perpetual calendar, real-time display system clock, can be set up to play different programs in
any time, Monday to Sunday or holiday.
2.3 540 lighting modes. Such as 7 static color, sync jumping and smooth, color flow, color chasing, smooth
flow, meteor trailing, etc.
2.4 Multi-level changing speed, brightness, RGB grey scales adjustment, effect of movement direction, etc.
2.5 Feel free to define many changing modes into a step, 8 independent cycle steps maximum.
1
50mm
15mm
Buzzer on/off: Long press "On/Off" button on the remote.
RF Remote Control
4. Operating Instructions:
8 function keys on the controller : MODE+, MODE-, SPEED+, SPEED-, BRT+(brightness), BRT-,
SETUP, FUN.
2
LT-200 LED Digital Controller
Table of Changing Modes.
No.
Color
Display
1
Black
2
Red
02 RED FLOAT
SPEED : 8
BRT : 8
3
Green
Color
No.
01 BLA
2017-02-10
12 : 00
03 GRN FLOAT
SPEED : 8
BRT : 8
16 Red/Purple
Green/Yellow
17
Green/Cyan
18
SETUP
Display
5.1 In the mode 1-28, press
16 R/P FLOAT
SPEED : 8
BRT : 8
1
Blue/Purple
19 B/P FLOAT
SPEED : 8
BRT : 8
Blue/Cyan
20 B/C FLOAT
SPEED : 8
BRT : 8
04 BLU FLOAT
SPEED : 8
BRT : 8
19
5
Yellow
05 YLW FLOAT
SPEED : 8
BRT : 8
20
6
Purple
06 PUR FLOAT
SPEED : 8
BRT : 8
21
7
Cyan
07 CYN FLOAT
SPEED : 8
BRT : 8
22 Yellow/Cyan
22 Y/C FLOAT
SPEED : 8
BRT : 8
8
White
08 WHI FLOAT
SPEED : 8
BRT : 8
23
Purple/Cyan
23 P/C FLOAT
SPEED : 8
BRT : 8
09 R/W FLOAT
SPEED : 8
BRT : 8
24
21 Y/P FLOAT
SPEED : 8
BRT : 8
1-28
General Modes
2
(range: 000-255)
(Only work for the modes 31~38)
3
Reset options to default
Press
PIXEL NUMBER : 0032
COLOR PIXEL :
08
Pixel width option (04, 08, 16, 32)
Running times adjustment
SETUP
Setting Method
LCD Display
(press mode+/- to switch)
Pixel No. option (range: 0032-1024)
18 G/C FLOAT
SPEED : 8
BRT : 8
Blue
button for 3 seconds to enter submenu, see the form below.
Submenu Function
NO.
17 G/Y FLOAT
SPEED : 8
BRT : 8
4
Yellow/Purple
LT-200 LED Digital Controller
5. “SETUP” Key Instruction:
RUN TIMES : 255
000 =NOT RUNNING
Press
SPEED+ SPEED-
BRT+
BRT-
BRT+
BRT-
Press
to adjust value.
Press
to adjust running times.
BRT+
LOAD DEFAULT SET
PRESS BRT+ - KEY
to switch items.
BRT-
Press
to restore the default
value of the current mode.
to save and exit submenu.
SETUP
9
Red & White
Red/Green
Red/Blue
10 Green/White
10 G/W FLOAT
SPEED : 8
BRT : 8
25
11 Blue/White
11 B/W FLOAT
SPEED : 8
BRT : 8
26
12 Yellow/White
12 Y/W FLOAT
SPEED : 8
BRT : 8
13 Purple/White
13 P/W FLOAT
SPEED : 8
BRT : 8
27 Red/Green/
Blue
28 All Color
14 Cyan/White
14 C/W FLOAT
SPEED : 8
BRT : 8
15 Red/Yellow
15 R/Y FLOAT
SPEED : 8
BRT : 8
Green/Blue
FUN
or
FUN
Jump type and change
to switch 8 mode types: JUMP,
the speed in maximum 8
26 G/B FLOAT
SPEED : 8
BRT : 8
or minimum 1.
2
27 RGB FLOAT
SPEED : 8
BRT : 8
28 ALL FLOAT
SPEED : 8
BRT : 8
press
SETUP
Press
or long press
(on controller)
SPEED-
(on controller)
B
B
(on remote)
29 DMX DECODE
DMX ADDRESS : 001
31 Play1 off
31 PLAY1 OFF
2017-02-15
12 :00
32 Play2 off
32 PLAY2 OFF
2017-02-15
12 :00
33 Play3 off
33 PLAY3 OFF
2017-02-15
12 : 00
34 Play4 off
34 PLAY4 OFF
2017-02-15
12 : 00
39 Play1-Play8
39 PLAY1-PLAY8
2017-02-15
12: 00
Set DMX address
Multiple setting
(range: 001~512)
(range: 01-32)
Duplicate channel value
Repeat setting
SETUP
(range 003-510)
Setting Methods
LCD Display
DMX ADDRESS : 512
DECODE
Mul : 01
DECODE
REPEAT
N UM : 003
Out:: NO
Press
Press
Press
Press
SPEED+
BRT+
SPEED+
BRT+
SPEED-
BRT-
SPEED-
BRT-
to switch items.
to adjust value.
to switch items.
to adjust value.
to save and exit submenu.
1
to switch 4 directions:
FUN
: :: FLOAT
SPEED : 8
BRT : 8
30
Press
DMX mode
Set DMX address
SETUP
30 DMX MODE
36 Play6 off
36 PLAY6 OFF
2017-02-15
12 : 00
37 Play7 off
37 PLAY7 OFF
2017-02-15
12 : 00
38 Play8 off
38 PLAY8 OFF
2017-02-15
12 : 00
Press
BRT+
BRT-
to adjust value.
to save and exit submenu.
Table of 29-30 Functional Modes.
BRT-
or
S
S
(on controller) (on remote)
35 PLAY5 OFF
2017-02-15
12 : 00
(Range: 0~512)
Setting Methods
LCD Display
DMX ADDRESS : 512
(on remote)
Adjust brightness by press
35 Play5 off
button for 3 seconds to enter submenu, see the form below.
Submenu Function
( ) forward, ( ) reverse, ( ) close, ( ) split.
BRT+
or
1
(press mode+/- to switch)
NO.
FLASH, SMOOTH, FADE, FLOW, CHASE, METEOR, FLOAT.
29 DMX decode
25 R/B FLOAT
SPEED : 8
BRT : 8
For mode types FLOW/CHASE/METEOR/FLOAT,
SPEED+
NO.
In the mode 2-8, select
button for 3 seconds to enter submenu, see the form below.
Submenu Function
SETUP
(on controller) (on remote)
Adjust speed by press
24 R/G FLOAT
SPEED : 8
BRT : 8
5.2 In the mode 29, press
5.3 In the mode 30, press
For mode 1~28:
Press
[Attn]
How to select 7 static
colors:
29~30:
DMX512 Control
Modes
Modes
Channel
29
DMX
Decoder
Mode
1st channel
0-255(R) : Red LED 0-100% dimming
2nd channel
0-255(G) : Green LED 0-100% dimming
3rd channel
0-255(B) : Blue LED 0-100% dimming
st
1 channel
Function
0-255: Select 1-29 modes, 256(0-255) values divided into 32 portion
(8 value per portion). The 29th mode occupy 4 portions (32 value).
st
When 1st channel select 29 mode
When 1 channel select the 1-28 modes
31-38:
Automatic Change
Modes
30
DMX
Manage
Mode
2nd channel 0-255(R) : Red LED 0-100% dimming
nd
2 channel : Speed (8 levels).
rd
3rd channel 0-255 (G): Green LED 0-100% dimming.
th
4th channel 0-255 (B): Blue LED 0-100% dimming.
3 channel : Brightness (8 levels).
4 channel : Mode type
th
5 channel : Direction changing
6th channel : Dynamic strobe
39: Automatic Time Running Mode
【Note】
Press “MODE+” / ”MODE-” button to switch modes.
3
www.ltech-led.com
The above changes by the DMX console are shown on the LCD screen accordingly.
( ) This sign on the screen indicates console signal.
4
30 DMX MODE
P/W FADE
S3B3
LT-200 LED Digital Controller
5.4 In the mode 31-38, press
NO.
SETUP
LT-200 LED Digital Controller
6. Wiring Diagram:
button for 3 seconds to enter submenu, see the form below.
Wiring Method
Submenu Function
(Press MODE+/to switch)
Signal cable
CHIP : LPD6803
ORDER : RGB
SPEED+
SPEED-
Press
to switch items.
OFF
SAVE1
OPEN1
BRT+ BRT-
Press
to switch 2 options: ON/OFF
Select “ON” to 39 automatic time running mode.
Setting switch state
1
31 PLAY1
OPEN1
OFF
SAVE1
OFF
SAVE1
Load 31~38 modes to
1~28 modes.
press
Press
Setting operation
week
RUN WEEK : MTWTFSS
TIME :18 : 00-06 : 00
BRT+ BRT-
SPEED+
to confirm.
SPEED-
Save 1~28 modes to
31~38 modes.
BRT+
BRT-
press
Operate time and
date 1
Operate time and
date 2
4
5
6
DATE01 :0101-0103
TIME : 00 : 00-00 : 00
DATE02 : 0501-0503
TIME : 00 : 00-00 : 00
Operate time and
date 3
DATE03 : 1001-1007
TIME : 00 : 00-00 : 00
System clock
setting
DATE/TIME SETUP
2012-01-01 12 : 00
Press
to switch items.
to adjust value.
BRT+
CHIP : TM1809
ORDER : RGB
SPEED-
to switch items.
BRT-
Press
Press
SPEED-
to switch items.
BRT-
Press
Single cable
Press
BRT+
SPEED-
to switch items.
BRT-
Press
Press
BRT+
SPEED-
Press
01 01-01 03 (date)
00 : 00-00 : 00 (time)
6.1 Sharing power supply
05 01-05 01 (date)
00 : 00-00 : 00 (time)
10 01-10 07 (date)
00 : 00-00 : 00 (time)
6.2 Power-up separately
to switch items.
2012-01-01 12 : 00
to adjust value.
SPEED+
BRT+
SPEED-
BRT-
to switch CHIP and ORDER.
to adjust value.
Chip option: TM1809, LPD6803, LPD8806, WS2801,P9813, TLS3001.
Order option: RGB, RBG, GRB, GBR, BRG, BGR
Modes restore
default value
8
Press
SETUP
BRT+
LOAD DEFAULT SET
PRESS BRT+ - KEY
BRT-
Press
to restore default value of the
current setting automatic mode.
to save and exit submenu.
SETUP
5.5 In the mode 39, press
LOAD DEFAULT SET
PRESS BRT+ - KEY
button for 3 seconds to enter submenu.
BRT+
Press
BRT-
to restore default value of mode 39.
In mode 39, will play the corresponding mode at some fixed time as pre-saved in mode 31-38, only factory
reset is available of this submenu, please use cautiously.
5
CHIP : P9813
ORDER : RGB
P9813
CHIP : TM1809
ORDER : RGB
UCS1903, UCS1909,
CHIP : TLS3001
ORDER : RGB
BRT-
Press
WS2801, WS2803
www.ltech-led.com
UCS1912, UCS2903,
UCS2909, UCS2912, WS2811
to adjust value.
SPEED+
CHIP : WS2801
ORDER : RGB
DATA
to adjust value.
SPEED+
LPD8803, LPD8806
TM1804, TM1809, TM1812
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
to adjust value.
SPEED+
BRT+
Press
IC types and RGB
sequence setting
7
SPEED+
CHIP : LPD8806
ORDER : RGB
to confirm.
M
T
W
T
F
S
S
(if you do not choose the Monday to Sunday, the
screen will appear "_" the one mark)
3
LPD6803, LPD1101, D705
UCS6909, UCS6912
BRT+ BRT-
M T W T F S S (day of the week)
00 : 00-00 : 00 (time)
Press
Compatible ICs
Two cables
DATA CLK
OPEN1
2
Choosing IC
Setting Methods
LCD Display
6
TLS3001, TLS3002
LT-200 LED Digital Controller
LT-200 LED Digital Controller
6.3 Connected with DMX 512 computer console to realize DMX decoding function.
7. Attention:
7.1 The product shall be installed and serviced by the qualified person.
7.2 This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure
it is mounted in a water proof enclosure.
7.3 Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
7.4 Please check if the output voltage of the LED power supply used comply with the working voltage
of the product.
7.5 Please ensure that adequate sized cable is used from the controller to the LED lights to carry the
current. Please also ensure that the cable is secured tightly in the connector.
7.6 Ensure all wire connections and polarities are correct before applying power to avoid any damages
to the LED lights.
7.7 If a fault occurs, please return the product to your supplier. Do not attempt to fix this product by yourself.
8. Warranty Agreement:
8.1 We provide lifelong technical assistance with this product:
A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement
if cover manufacturing faults only.
For faults beyond the 5-year warranty, we reserve the right to charge for time and parts.
8.2 Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to excess voltage and
6.4 Connected with DMX 512 manual console, realizing DMX administrative function.
overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
8.3 Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
LTECH shall not be liable for any incidental or consequential damages for breach of any stipulation
in this warranty.
8.4 Any amendment or adjustment to this warranty must be approved in writing by LTECH only.
★ This manual only applies to this model. LTECH reserves the right to make changes without prior
notice.
7
www.ltech-led.com
8
www.ltech-led.com
Update Time: 2017.02.15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising