"spreading in the wide sense" en muck spreader range

"spreading in the wide sense" en muck spreader range
Ref. : 2098760073-17-EN
EN
MUCK SPREADER RANGE
www.joskin.com
"SPREADING IN THE WIDE SENSE"
THE JOSKIN QUALITY:
6 Keys to Success
Production site (Belgium)
Strength of EXPERIENCE
FOUNDED IN 1968, the JOSKIN family business became A LEADER in the design and manufacture of
agricultural machines. SPREAD OVER BELGIUM,
POLAND AND FRANCE on a total surface area of almost 150,000 m², the JOSKIN production sites are
EXPORTING TO MORE THAN 60 COUNTRIES.
TECHNICAL SKILLS within
VERY MODERN AND HIGHLY PRECISE TECHNIQUES
are used: dynamic 3D simulation, automated lasers,
folding presses, high tensile steel, hot-dip galvanization, automated continuous weldings.
Buy with CONFIDENCE
3
-YEAR
WARRANTY
See conditions on www.joskin.com
2
Technical Centre (Poland)
RESEARCH and DEVELOPMENT
JOSKIN has its own industrial design offices and 3D static and dynamic engineering software. The production is
standardized as much as possible in order to ensure a
precise manufacturing and a deadline compliance,
while proposing hundreds of options! Our technicians and dealers are constantly trained in our
technical centres.
At the SERVICE of our customers
Our great strength: the AVAILABILITY OF SPARE
PARTS at any time and anywhere. Thanks to our permanent stocks, we send your parts as quickly as possible. The JOSKIN dealers undertake to have a stock
of the most important spare parts of the machines.
Individualized PARTS book
The PARTS BOOK and the USER'S MANUAL are provided in your language when purchasing a machine.
The parts book includes drawings and references of
the components mounted on your machine. Even
years later, spare parts can be ordered efficiently!
3
Muck Spreader
Range
ADVANCED TECHNIQUE
MANUFACTURING THE SPREADERS
The steel processing knowledge and the material choice are essential. Special steel types with high tensile limit allow to reduce – or
even remove – the crosspieces and side reinforcements. Vehicles
are in this way lighter, stronger and benefit from clear and elegant
lines. The steel sheets are processed by modern tools like a 8 m laser
cutting table, a 8.2 m folding press with digital control and automatic folding angle correction device (making sure the steel plate is
evenly folded on the whole length), 8 m welding robots, etc.
At JOSKIN, there is not one winning solution, but well as many
as different requests; that is why each spreader is manufactured
individually with standardized components.
Lathe with digital control
During the manufacture, a special attention will be paid to your
future machine. Just like all JOSKIN products, the muck spreaders
benefit from an optimal surface treatment: cleaning by shot-blasting, Ester Epoxy finishing coating and thermal drying. Since
JOSKIN galvanizes its machines in its factory, muck spreaders can
also possibly be galvanized for a maximal protection against corrosive matters.
Welding robot
Manual welding
Laser cutting table
Folding machine with digital control
4
Hot galvanizing bath (inside and outside)
"Win Pack" Advantages
To combine quality manufacturing and shortened delivery
time, JOSKIN proposes WIN PACK machines. They are:
• reliable and of high quality thanks to the standardized manufacturing process;
• adapted to your farm and affordable;
• in stock or rapidly available;
• fitted with pieces of equipment that were tested in real working
conditions;
• modular given the many options.
5
APPROPRIATE STRUCTURE
Unique Design of the JOSKIN
Muck Spreaders
Models:
• SIROKO
• FERTI-CAP
• TORNADO3 - TORNADO3 HORIZON
• FERTI-SPACE2 - FERTI-SPACE2 HORIZON
• FERTI-CARGO
MADE BY JOSKIN
The standardization offers possibilities to uniformize designs and
to make more profitable production techniques. Modern and high
quality spreading and transport technologies are made affordable
to most customers.
All spreaders of the JOSKIN range have a large standard equipment:
• beaters with folded spirals for intense splitting and a large spreading width;
• manual control of the moving floor drive by regulator with constant pressure;
• moving floor with shipping chain with grade 80 (the highest
grade in traction chains currently existing);
• easy to reach floor tensioner located outside the body;
• hitching suspension with parabolic leaves (hydraulic suspension
on Tandem model).
These pieces make JOSKIN muck spreaders very easy to use and ensure a better working comfort to the users.
Hitching suspension
with parabolic leaves
Floor tensioner
Shipping chains - bolted moving floor
6
The jigs used in the factory ensure precision and rapidity
during the manufacturing process
SPREADER RANGE
Model
Vol.
Illustration
Specifications
8/13 M³
9/12 M³
• Wide body
• Wheels under the body
• Standard galvanized
11/24 M³
• Narrow body
• Machine with very high capacity
• Low centre of gravity
• Large wheels
FERTI-SPACE2
15/25 M³
• Wide body
• Machine with very high capacity
• Wheels under the body
• Double moving floor
FERTI-CARGO
16/25 M³
TRACTOR < 130 HP
• Narrow body
• Low centre of gravity
• Large wheels
• Standard galvanized
• Interchangeable body
• Universal chassis
SIROKO
FERTI-CAP
TORNADO3
TRACTOR > 130 HP
HEAVY MANURE
Flow between 5 and 50 t/ha
VERTICAL BEATERS
P. 8
P. 10
P. 9
P. 11
P. 17
Lowered and sturdy body
Precise spreading
Low center of gravity
Large wheels
P. 14
P. 15
P. 17
TORNADO3
HORIZON
14/16 M³
•
•
•
•
FERTI-SPACE2
HORIZON
15/25 M³
• Wide body
• Fine and precise distribution
• Double moving floor
FERTI-CARGO
HORIZON
16/25 M³
TRACTOR > 130 HP
UNIVERSAL PRODUCTS
Flow between 3 and 15 t/ha
SPREADING TABLE
• Interchangeable body
• Universal chassis
7
SIROKO
Lowered Narrow Body
for Quality Spreading
GENERAL POINTS
TRANSMISSION
The JOSKIN SIROKO spreader with lowered galvanized body is remarkable in many ways: its innovative design makes maintenance
much easier. The cross-suspension hitching and the large dimensions of the wheels provide it with an excellent stability both when
working and on the road. Its body in HLE 550 high tensile steel is
made up of successive foldings and has a rectangular upper strip.
The side walls of 850 mm, 1,090mm or 1,340 mm high offer a load
capacity from 5 m³ to 14.17 m³. According to the product, the two
beaters with folded spirals split and spread from 7 to 10 m away per
row.
The transmission is protected by elastic couplings between the
boxes (1).
1
1
SPECIFICATIONS
Hitching suspension
Cross-suspension with parabolic leaves
Moving floor
2 Ø 14 mm shipping chains
Vertical beaters
Ø 785 mm, 1,750 mm or 2,000 mm high, with 4 or 5 folded
spirals
Teeth
Removable in HARDOX 450 steel (80 x 6 mm)
Discs
Ø 829 mm with retractable blades
Drive
1,000 rpm
Rotation speed
of the beaters
423 rpm
NB: the technical specifications of the SIROKO 4008/8V are totally different from the rest
of the range.
SIROKO MODELS(1)
Off-road
Inner body dimensions (m)
payload Length be- Length up to
Width
fore door
beaters
S4008/8V
S4010/9V
S5010/11V
S5013/12V
S5513/13V
(1)
8t
9t
11 t
12 t
13 t
4.15
4.18
5.21
5.05
5.50
4.65
4.67
5.70
5.54
5.99
1.45
1.45
1.45
1.45
1.45
Height
Body
volume
before
door
0.85
1.09
1.09
1.34
1.34
5 m³
6.44 m3
8.10 m³
9.43 m³
10.40 m3
Manure
Manure
volume bevolume
fore door up to beaters
7.7 m³
8.41 m3
10.56 m³
11.78 m³
12.98 m3
8.1 m³
9.40 m3
11.55 m³
12.96 m³
14.17 m3
The first 2 figures refer to the average length, the next 2 ones to the average height and the last ones to the manure volume before the door.
8
Axle: (mm)
- track (mm) studs
Brakes
(mm)
ADR 100x2000-10S
ADR 100x2000-10S
ADR 130x2100-10S
ADR 130x2100-10S
ADR 130x2100-10S
400 x 80
400 x 80
406 x 120
406 x 120
406 x 120
TORNADO3
Muck Spreader with Lowered
Narrow Body for Intensive
Work
TRANSMISSION
GENERAL POINTS
The transmission is protected by elastomer couplings between
the boxes and the beaters (1) that will absorb shocks and therefore
increase the lifespan of these boxes.
The TORNADO3 is also a muck spreader with lowered narrow body
in HLE steel and wheels with a large diameter as well. Its high capacities and sturdiness are ensured by its body made up of successive
foldings and by a side reinforcing post.
1
1
This body has a height varying from 1,130mm to 1,370mm, and offers load volumes from 8.6 to 25.8 m³, depending on the model. The
beaters with folded spirals spread evenly on a width from 7 to 16 m
per row, depending on the product.
SPECIFICATIONS
Hitching suspension
Cross-suspension with parabolic leaves
Moving floor
2 Ø 16 mm shipping chains
Vertical beaters
Ø 1,010 mm, depending on model from 1,770 mm to
2,220 mm high with 4 to 7 folded spirals
Teeth
Removable in HB 400 high tensile steel (80 x 12 mm)
Discs
Ø 1,100 mm with retractable blades - option discs with 3
blades
Drive
1,000 rpm
Rotation speed
of the beaters
445 rpm
TORNADO3 MODELS(1)
Off-road
Inner body dimensions (m)
Body vol- Manure volManure
payload Length before
ume before ume before
volume up
Length up
Width
Height
door
door
to beaters
door
to beaters
T5011/11V
11 t
5.0
5.5
1.45
1.13
8.6 m³
10.8 m³
12.0 m³
T5511/12V
12 t
5.5
6.0
1.45
1.13
9.5 m³
11.9 m³
13.3 m³
T5513/14V(H*)
13 t
5.5
6.0
1.45
1.37
11.5 m³
14.4 m³
16.1 m³
T5516/16V
14 t
5.5
6.0
1.45
1.57
13.1 m³
16.0 m³
17.8 m³
T6013/16V(H*)
15 t
6.0
6.5
1.45
1.37
12.7 m³
15.9 m³
17.6 m³
T6016/17V
15 t
6.0
6.5
1.45
1.57
14.3 m³
17.5 m³
19.3 m³
T6516/19V
16 t
6.5
7.0
1.45
1.57
15.6 m³
19.0 m³
20.9 m³
T6516/19BV
18 t
6.5
7.0
1.45
1.57
15.6 m³
19.0 m³
20.9 m³
T7016/21BV
20 t
7.0
7.5
1.45
1.57
16.8 m³
20.6 m³
22.4 m³
T7018/24BV
21 t
7.0
7.5
1.45
1.57 + 0.25
20.3 m³
23.9 m³
25.8 m³
(1)
The first 2 figures refer to the average length, the next 2 ones to the average height and the last ones to the manure volume before the door.
(H*) Also available in HORIZON version.
Axle: (mm)
- track (mm) studs
ADR 130x2100-10S
ADR 130x2100-10S
ADR 130x2100-10S
ADR 150x2100-10S
ADR 150x2100-10S
ADR 150x2100-10S
ADR 150x2100-10S
ADR 2x130x2300-10S
ADR 2x150x2300-10S
ADR 2x150x2300-10S
Brakes
(mm)
406 x 120
406 x 120
406 x 120
420 x 180
420 x 180
420 x 180
420 x 180
406 x 120
420 x 180
420 x 180
9
FERTI-CAP
Wide Body for Spreading
and Transport
GENERAL POINTS
TRANSMISSION
The JOSKIN Ferti-CAP with wide monocoque body in HLE 550
steel of 810 mm high spreads on a wide surface. With its capacities
from 6.91 to 13.97 m³, it is very multi-functional in spreading and
transport of various materials. According to the product, the large
diameter of the vertical beaters with folded spirals allow to spread
on a width from 8 to 12 m per row.
The transmission is protected by elastic couplings between the
boxes (1).
1
1
The beaters can easily be removed to convert the Ferti-CAP into a
harvest trailer (silage and others).
SPECIFICATIONS
Hitching suspension
Cross-suspension with parabolic leaves
Moving floor
2 Ø 14 mm shipping chains
Vertical beaters
Ø 1,080 mm, 1,500 mm high, with 3 folded spirals
Teeth
Removable, in HARDOX 450 steel (80 x 6 mm)
Discs
Ø 1,140 mm with 3 blades
Drive
1,000 rpm
Rotation speed
of the beaters
423 rpm
FERTI-CAP MODELS(1)
Off-road
payload
FC4008/9U
FC5008/10U
FC5508/12U
FC 5508/12BU
(1)
8t
10 t
12 t
12 t
Length
before
door
4.17
4.87
5.67
5.67
Inner body dimensions (m)
Length up
Width
Height
to beaters
4.72
5.42
6.22
6.22
2.04
2.04
2.04
2.04
0.81
0.81
0.81
0.81
Body
volume
before
door
6.91 m3
8.10 m³
9.45 m³
9.45 m³
Manure
volume
before
door
9.01 m3
10.54 m³
12.29 m³
12.29 m3
Manure
volume
up to
beaters
10.25 m3
12.22 m³
13.97 m³
13.97 m³
The first 2 figures refer to the average length, the next 2 ones to the average height and the last ones to the manure volume before the door.
10
Axle: (mm) track (mm) studs
Brakes
(mm)
ADR 90x2000-8S
ADR 100x2000-10S
ADR 130x2000-10S
ADR 2x90x2000-8S
400 x 80
400 x 80
406 x 120
350 x 60
FERTI-SPACE2
A Spreader in the
Wide Sense...
TRANSMISSION
GENERAL POINTS
The transmission is protected by elastomer couplings between
the boxes and the beaters (1) that will absorb shocks and therefore
increase the lifespan of these boxes.
The Ferti-SPACE2 has a wide monocoque body in HLE steel, 1.050 mm
or 1.350 mm high, offering a large spreading width. With its strong
design and its capacities from 12 to 21 m³, it is a multi-functional
machine for intensive use. The large diameter of the vertical beaters
with folded spirals, allows the Ferti-SPACE2 to spread on a width from
8 to 16 m per row, depending on the product.
1
1
This model can easily be converted into a harvest trailer by
dismounting the beaters.
The hydraulic suspension is bolted to allow to adapt to different
configurations. The drive shaft is perfectly adapted to powerful
tractors (Ø 45).
SPECIFICATIONS
Hitching suspension
Cross-suspension with parabolic leaves
Moving floor
Teeth
4 Ø 14 mm shipping chains
Ø 1,080 mm, height 1.830 mm (serie 11) or
2.080 mm (serie 14) with 4 olded spirals
Removable, in HB 400 high tensile steel (type HARDOX),
80 x 12 mm
Discs
Ø 1,000 mm with 3 blades
Drive
Beater rotation speed
1,000 rpm
381 rpm
Vertical beaters
The welded bottom has a reinforced moving floor with various
advantages: the bolted wear slatts make maintenance operations
easier, return to the tank is improved, the space between the
tensioners is increased, the gearwheels are enlarged to completely
follow the chains of the floor.
Furthermore, the pulleys are made of Ø 135 cast-iron and the two
floors are fitted with a central separator.
FERTI-SPACE2 MODELS(1)
Off-road
Inner body dimensions (m)
payload Length be- Length up to Width
Height
fore door
beaters
FS5511/15BU(H*)
14 t
FS6011/17BU(H*)
FS6511/18BU(H*)
Body
volume
before
door
Manure
volume
before
door
Volume
volume
up to
beaters
Axle: (mm) track (mm) - studs
Brakes
(mm)
5.5
6.05
2.05
1.05
12.32 m³
15.49 m³
17.04 m³
ADR 100/130x2100-10S
400 x 80
16 t
6
6.55
2.05
1.05
13.41 m³
16.87 m³
18.42 m³
ADR 2x130x2100-10S
406 x 120
18 t
6.5
7.05
2.05
1.05
14.51 m³
18.24 m³
19.79 m³
ADR 2x130x2100-10S
406 x 120
FS7011/20BU(H*)
20 t
7
7.55
2.05
1.05
15.60 m³
19.62 m³
21.17 m³
ADR 2x150x2100-10S
420 x 180
FS7014/25BU(H*)
22 t
7
7.55
2.05
1.35
20 m³
25.2 m³
27.2 m³
ADR 2x150x2100-10S
420 x 180
FS7011/20TRU(H*)
20 t
7
7.55
2.05
1.05
15.60 m³
19.62 m³
21.17 m³
ADR 3x150x2100-10S
420 x 180
FS7014/25TRU(H*)
26 t
7
7.55
2.05
1.35
20.50 m³
25.75 m³
27.80 m³
ADR 3x150x2100-10S
(1)
The first 2 figures refer to the average length (in dm), the next 2 ones to the average height (in dm) and the last ones to the manure volume before the door (in m³).
420 x 180
(H*) Also available in HORIZON version
11
OPTIONS FOR MODELS
WITH VERTICAL BEATERS
Good Equipment
for a Better Work!
JOSKIN MUCK SPREADERS, A FEW OPTIONS...
EXTENSIONS
Unless otherwise indicated, all options are available on the whole
range of JOSKIN muck spreaders.
- PVC protection for upper body strip
- Aluminium or wooden extensions (250 mm)
GUILLOTINE DOOR
A tight guillotine door, which can be adjusted on the full height of
the beaters, can be installed. It avoids load losses during transport
and makes it possible to regulate the flow while spreading.
PVC protection
Aluminium extensions
Guillotine door
Anti-blocking door runner
Wooden extensions
HYDRAULIC INSTALLATION
An independent hydraulic installation is available to drive the
moving floor or all hydraulic elements of the machine.
This option is interesting for use of the spreader by several owners
(avoid oil mixing) or with a tractor with no sufficient hydraulic circuit.
FLOOR TENSIONER
Every JOSKIN muck spreader is
standard fitted with a mechanical floor tensioner. As an option,
it is possible to choose a hydraulic model with hand pump.
Hydraulic installation
12
CANOPY
CENTRAL SEPARATORS
Small
bolted separator
Large retractable
separator
JOSKIN proposes canopies with
quick uncoupling or hydraulic
opening, which are interesting
tools to spread lighter products
(poultry manure).
They can be fitted with a limitation board with hydraulic opening/closing to spread at the field
edge.
Canopy with quick uncoupling
LIMITATION BOARDS
These limitations boards, which can be mounted on the left or
right-hand side, are used to spread at the field edge.
A double limitation board can also be mounted. The two parts are
then independently opened. It is used for headland spreading and
to cover the beaters.
Spreading canopy with limitation board(s)
EXTENSIONS
The grated extensions (750 mm) are
fitted with a reclining headboard.
Limitation board
Double protection board
REAR GRATE
Protection grate for the beaters with hydraulic opening
upwards (compulsory in some
countries). On some models,
the limitations boards can be
combined with the rear grate.
REAR UNLOADING AUGER
A transfer system can be
mounted as an option on the
rear door of the Ferti-SPACE
muck spreaders. Two augers, one
that is horizontally placed over
the whole width of the body and
the other vertically, drive the
matter.
13
TORNADO3 HORIZON
Precise and strong
muck spreader
GENERAL POINTS
TRANSMISSION
The inside of the body measures respectively 5.5 m and 6 m long. The
HORIZON swinging scatterer is made up of two horizontal beaters
with Ø 600 mm of diameter (rotation: 300 rpm) and with two spreading discs with 1.100 mm diameter (rotation: 425 rpm).
The spreading table was designed to crumble and throw on large
widths all type of products (cattle manure, compost, organic wastes,
lime, poultry manure, etc.). The horizontal beaters and the spreading
table allow to spread perfectly, even with a low flow.
The ovoid shape and the entangling of the spreading discs allow their
integration in 1,100 mm on a narrow body. This large diameter and
their perfect synchronization
with the horizontal beaters allow a wide and homogeneous
spreading.
The inside of the canopy is padded to prevent the matter to agglomerate against the rear wall.
Two wide spreading discs
(Ø 1,100 mm) with 3 blades
spread over the width.
The beaters are driven by P.T.O.shafts (1,000 rpm) and turn at
300 rpm.
Two security P.T.O.-shafts ensure
the protection of the mechanism (partition of the beater
rotation system of those of the
loaders and partition of that one
of the drive shaft).
SPECIFICATIONS
Hitching suspension
Cross-suspension with parabolic leaves
Moving floor
2 Ø 16 mm shipping chains
Horizontal beaters
Ø 600 mm rotation speed 445 rpm
Teeth
Removable, in S700MC steel (194 x 50 mm)
Discs
Ø 1.100 mm with 3 blades (420 rotations min. rpm)
Drive
1,000 rpm
Overall dimensions of
the spreading table
1,400 mm with 4 folded spirals
TORNADO3 MODELS SEE PAGE 9
COMMON CHARACTERISTICS OF TORNADO3 HORIZON ET FERTI-SPACE2 HORIZON2
Ø 600 MM HORIZONTAL BEATERS
The macerator, fitted with two horizontal beaters with a diameter
of 600 mm and with two spreading discs, crumbles and shreds the
matter very well.
14
MECHANICAL TRANSMISSION BY P.T.O.-SHAFT
The beaters are driven by P.T.O.shafts (1,000 rpm) to ensure the
safety and the protection of the
whole mechanism.
FERTI-SPACE2 HORIZON
Universal spreader
high capacity
TRANSMISSION
GENERAL POINTS
The beaters are driven by P.T.O.shafts (1,000 rpm) and turn at
320 rpm.
Security P.T.O.-shafts ensure the
protection of the mechanism by
separating the central box from
the beaters and the loaders.
The Ferti-SPACE2 HORIZON is designed to spread different products
(cattle manure, compost, organic wastes, lime, poultry manure, etc.)
on large widths. The horizontal beaters and the spreading table allow to spread evenly, even with a low flow. The ISOBUS applications
(through the FC4000 terminal) allow a highly precise spreading.
SPECIFICATIONS
Hitching suspension
Cross-suspension with parabolic leaves
Moving floor
4 Ø 14 mm shipping chains
Horizontal beaters
Ø 600 mm rotation speed 320 rpm
Teeth
Removable, in S700MC steel (230 x 50 mm)
Discs
Ø 1.040 mm with 6 blades (500 rotations min. rpm)
Drive
1,000 rpm
Overall dimensions
the spreading table
1,300 mm height (serie 11) or 1550 mm
(serie 14) with 4 folded spirals
FERTI-SPACE2 MODELS SEE PAGE 11
LIMITATION BOARD ON THE LEFT/RIGHT
GUILLOTINE DOOR
SEE
PAGE 12
To spread at the field edge, JOSKIN spreaders can be fitted with
an independent hydraulically controlled limitation board on the
left and right.
15
CARGO CHASSIS
Multi-Purpose Chassis
TRM SERIES
TSM SERIES
MODULAR CONCEPT
MANAGEMENT AND CONTROL
The CARGO concept allows to maximize the use of your agricultural implements thanks to a single basic chassis for 5 types of implements! It is a flexible and economical solution. Next to a slurry
tanker, with or without spreading tool, the chassis can be fitted with
a muck spreading body, a silage body, a Drakkar body or a monocoque agricultural tipping body.
The CARGO chassis are fitted with electrovalves gathered on a
monoblock basis and protected by a galvanized box.
HITCHING
This hydraulic distribution installation includes an entry block
(capacity: 60 l/min or 120 l/min). A high number of hydraulic
functions of the vehicles requires a low flow, but it is important to
know which ones require a high flow, like the hydraulic motors of
the turbo-filler, macerators, etc.
The CARGO chassis are standard fitted with the Hydro-Tandem
(CARGO TSM) or Hydro-Tridem (CARGO TRM) hydraulic axle suspension.
This type of running gear combines the advantages of the axles that
can easily be pulled over obstacles and the semi-independent axles
offering a large clearance. This suspension works in closed circuit
according to the communicating vessels principle. Large section pipes
are used to improve the reactivity of the system, which is extremely
useful in case of significant ground unevenness.
Finally, their 250 mm clearance ensures an optimal distribution of the
loads in all circumstances.
Hydropneumatic suspension
Mounted on hydraulic ram with two
nitrogen accumulators, it offers a high
flexibility.
CARGO CHASSIS MODELS
CARGO TSM (6.6)
CARGO TRM (6.6)
CARGO TRM (7.5)
16
Chassis length (m)
6.60
6.60
7.55
Stand
Hydraulic skid
direct conn. to
tractor (DA)
Axle(s): (mm) - track (mm) - studs
ADR 2x150x2000-10S
ADR 3x150x2000-10S
ADR 3x150x2000-10S
Brakes (mm)
420 x 180
420 x 180
420 x 180
CARGO SYSTEM
Tools
DRAKKAR-CARGO
VACU-CARGO
FERTI-CARGO
TRANS-CARGO
SILO-CARGO
GENERAL POINTS
The JOSKIN CARGO multi-module carrier can be fitted with 2 models
of Ferti-CARGO muck spreader with wide body for high capacities:
- a muck spreader with two vertical beaters with folded spirals to
spread in a quality way and to spread on a 8 to 16 m width, depending on the product;
-the HORIZON model, designed to spread various products (cattle manure, compost, organic wastes, lime, poultry manure, etc.)
on large widths, with horizontal beaters and spreading table for a
good distribution.
Horizontal beaters
FERTI-CARGO MODELS(1)
Ferti-CARGO 6011/17
Ferti-CARGO 7011/20
Ferti-CARGO 7014/25
Length
before door
6.00
7.00
7.00
Inner body dimensions (m)
Length up
Width
to beaters
6.55
2.05
7.55
2.05
7.55
2.05
Height
Body volume
before door
Manure volume before
door
Manure
volume up to
beaters
1.05
1.05
1.35
13.41 m³
15.60 m³
20.00 m³
16.87 m³
19.62 m³
25.20 m³
18.42 m³
21.17 m³
27.20 m³
1.05
1.05
1.35
12.32 m³
13.41 m³
20.00 m³
15.49 m³
16.87 m³
25.20 m³
17.04 m³
18.42 m³
27.20 m³
FERTI-CARGO HORIZON MODELS(1)
Ferti-CARGO 6011/17
Ferti-CARGO 7011/20
Ferti-CARGO 7014/25
(1)
5.50
6.00
7.00
6.05
6.55
7.55
2.05
2.05
2.05
The first 2 figures refer to the average length, the next 2 ones to the average height and the last ones to the manure volume before the door.
17
OPTIONS
Management, Control
and Novelties
MANAGEMENT AND CONTROL
FERTI-CONTROL
JOSKIN proposes three ways to control its spreaders:
There are four control boxes to manage and control the JOSKIN
muck spreaders. They each have their own functions and specifications.
1 A DIRECT CONNECTION TO THE TRACTOR (DISTRIBUTORS)
2 AN ELECTRO-HYDRAULIC CONTROL VIA FERTI-CONTROL
3 AN ISOBUS SYSTEM VIA FERTI-ISOCONTROL OR THE
ISOBUS TERMINAL OF THE TRACTOR
DYNAMIC WEIGHING SYSTEM ON HYDRAULIC SUSPENSION
Vehicles fitted with a hydraulic hitching suspension and a hydraulic
running gear can be fitted with this device.
Two pressure sensors located on the hydraulic circuit of the running
gear, as well as one on the hitching suspension, are connected to
a computer on the running gear. These sensors send cable signals
so that the weight can be displayed on a screen in the tractor cabin. Another screen can be installed on a loader or on the vehicle in
order to see the load weight at any time. This system is also compatible with Isobus and can be controlled through the Isobus terminal that replaces in this case the separate screen. It is available
on tipping trailers, muck and slurry spreaders, multi-purpose and
silage trailers.
On a muck spreader, the dynamic weighing system allows the “DPA”
(flow in proportion to the driving speed) to be regulated according
to the weight and to spread very precisely.
3 x pressure sensors
18
•
FERTI-CONTROL 200:
- Door opening indicator
- Spreader counter
- Display of the moving floor speed (option)
•
FERTI-CONTROL 300:
- Floor on/off switch
- Electric moving floor control
- Inversion of the moving floor direction by tractor distributor
•
FERTI-CONTROL 500:
- Floor on/off switch
- Electric moving floor control
- Electric inversion of the moving floor direction - Any extra electro-hydraulic function (option)
• FERTI-CONTROL 4000:
- Floor on/off switch
- Electric moving floor control
- Electric inversion of the moving floor direction - Any extra electro-hydraulic function (option)
- Door opening indicator (option).
- Flow proportional to the driving speed (DPA, option).
Ferti-CONTROL 200
Ferti-CONTROL 300
Ferti-CONTROL 500
Ferti-CONTROL 4000
FLOW PROPORTIONAL TO THE DRIVING SPEED (DPA)
To spread precisely, JOSKIN proposes an electronic spreading management
(DPA), which is available on ISOBUS and Ferti-Control 4000.
During the use, the operator indicates the loaded volume (full load, half load,
etc.), the flow per hectare (in m³ or t/ha), the effective working width as well
as the product density. If the system is combined with a weighing device,
the operator first has to validate the load in the spreader (available on the
weighing device). From this data and the selected loaded volume (full load,
half load, etc.), the density will be calculated.
Then, he will choose the position of his door according to the matter to
spread. Once this information is introduced in the terminal, the movement of
the moving floor will be automatically controlled according to the demanded flow and to the driving speed of the spreader.
The regulation works in closed circuit and the moving floor speed is continuously controlled. This system ensures that the necessary floor speed will be
respected even if the body is almost empty or if, on the contrary, it is well
filled and if the spreader drives on a slope.
ISOBUS
The interface of the JOSKIN control box, just like that of the automaton, can be replaced by the ISOBUS terminal that is already present in the
tractor cabin. If there is none, the JOSKIN terminal can also be delivered. The aim is to ensure the communication between different tractors
and the many implements (and vice versa) through a standardized language. This international standard is ever more used and allows a
quick and easy connection ("plug & play") between various brands. One single control box in the cabin replaces several ones: a direct way to
high-tech agriculture!
At JOSKIN, the ISOBUS allows to centralize, for instance, the electro-hydraulic controls, pressure sensors, injectors, the flow proportional to
the advancement speed, or the dynamic weighing system.
Moreover, the Terminal is compatible with a GPS system for a precise guiding while spreading on the different parcels. Most tractor manufacturers are using this technology. Do not hesitate to consult us in case of doubt regarding the compatibility.
iso -CONTROL 2.0
ISO Control Touch 800 - screen 10,4’’
ISO Control Touch 1200 - 12,1’’ screen - double screen
19
Non-contractual document. Data are subject to change without notice. The pictures do not necessary correspond to standard equipment.
"QUALITY WITHOUT COMPROMISE"
www.joskin.com
rue de Wergifosse, 39 • B-4630 Soumagne - BELGIUM • E-mail: info@joskin.com • Tel.: +32 (0) 43 77 35 45
Your local JOSKIN partner
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising