VXE series
VXE series
29-03-2010
18:29
Pagina 1
products range
GB
1.2 | 1.7 Ton.
Models inside
12VXE | 17VXE
www.ihimer.com
VXE series
29-03-2010
18:29
Pagina 2
VXE series
29-03-2010
18:29
Pagina 3
VXE series
29-03-2010
18:29
Pagina 4
12VXE
Small and powerful
The 12VXE is a completely new concept: small enough to pass
through a door. Robust enough to do jobs above its category.
An exceptional machine. With its 12.9 hp engine and digging
depth of 2010 mm it handles heavy work in the most challenging
conditions with ease.
YANMAR 12.9 HP DIESEL ENGINE
The 3-cylinder engine runs at low speed with a reduced
exploitation index for improved durability and long-term
reliability. The air filter with its high filtering capacity is
composed of a double cartridge that reduces maintenance
and increases the reliability of the engine. The fuel circuit
is equipped with a diesel filter with a water separator,
ensuring a long engine life. The high efficiency of the
engine combined with an advanced hydraulic system
ensures low fuel consumption and low running noise,
and limits polluting emissions according to the antipollution requirements of 97/68/EU and EPA Tier 4.
SAFETY
The TOPS-FOPS certified rollbar cage (an optional FOPS
cover is available) ensures outstanding working visibility.
The boom movements are softened by the Anti-Shock
valve in the hydraulic circuit. In the phase of lifting the
1st boom the shock of stopping at the boom’s limit stop is
reduced by the cylinder shock-absorbing system. The slew
brake motor prevents accidental arm movements during
transport or when the machine Is parked. The arm is
controlled by the LH joystick. The auxiliary circuit control
pedal is equipped with a tilt-away guard which acts both
as a foot rest and circuit lock for remote operation.
TWO
TRAVELLING
SPEEDS
The two travelling
speeds (2.3 / 4.0
kph) enable
moving quickly
on site along
with maximum
manoeuvrability.
VXE series
29-03-2010
18:29
Pagina 5
90 cm
The 12VXE can drive
through doors
no more than
90 cm wide.
The rollbar can
also be removed
in just a few minutes
to facilitate
passing through
low clearance areas.
REAR FRAME WITHIN CLEARANCE
While slewing, the chassis frame turns within
the clearance of the tracks with the carriage
extended, allowing greater safety for the
machine and for the operator. With the carriage
closed, the machine can access even the most
restricted spaces. With a width of 870 mm and
a tilt-back rollbar, the machine is perfect for
restructuring interiors.
COMPACT SIZE
The perfect combination of small
size and high power. The 12VXE
gives access to previous inaccessible
spaces, for working in interiors or
passing through buildings to access
internal gardens or courtyards
which are otherwise almost
impossible to get to.
EASY ACCESS AND MAINTENANCE
The 12VXE’s vertically-opening engine hood
provides easier access and visibility of most of the
engine along with easy accessibility for daily
inspection (oil-filters-belts) and maintenance. The
battery requires reduced maintenance. The diesel
tank is generously sized to allow the machine to be
run for an entire day in normal use.
It is easy to access for refilling and protected with
a key-operated cap. The pumps are equipped with
pressure-gauge points to facilitate monitoring
hydraulic pressure values.
VXE series
29-03-2010
18:29
Pagina 6
COMPACT SIZE
Front turning radius
.
with swing: 1440 mm
row
Machine width in nar
.
configuration: 870 mm
870
1130
VARIABLE-WIDTH CARRIAGE
The 12VXE’s variable width undercarriage
(870-1130 mm) guarantees excellent
safety and working stability in digging
and side lifting operations on sites with
very little room for manoeuvre and
on broken ground or steep gradients.
The circular tube improves extension
while reducing backlash.
EXTENSIBLE CARRIAGE AND BLADE
When the machine is working with
the carriage closed, the two outwards
extensible sections of the blade are easily
stored behind the blade itself A lever via
a function selector controls the movement
of the blade or the expansion of the carriage.
Technical features
12VXE
Operating weight CG rollbar
Bucket width/capacity
Width with carriage closed/extended
Rear turning radius
Maximum depth of excavation
1260 kg
400 mm / 0.025 m3
870 / 1130 mm
550 mm
2010 mm
COMFORT AND SAFETY
The operator position is especially
comfortable, thanks to the adjustable
wrap-around seat design and wrist
supports and ergonomic control layout.
It is equipped as standard with
servo-assisted joysticks that ensure
the utmost precision. Two safety levers
control access to the driving seat and,
if lifted, inhibit all the machine working
and travelling controls.
The multifunction analogue control
display - hour meter, fuel level, oil
temperature and warning lights - is
user friendly and facilitates the work
of less expert operators, thus increasing
their productivity.
DIGGING PERFORMANCE WORTHY
OF LARGER MACHINES
The positioning of the 1st excavator arm cylinder
(above the arm to protect against damage), together with
the design of the pin and the reduced clearance of the
bucket articulation, increase digging performance
to 2010 mm, a very high performance category for such
a compact model.
PROTECTION FOR COMPONENTS
The hydraulic circuits, including
the auxiliary circuit for use with
a variety of hydraulic attachments,
run inside the arm and foremost
arm to protect against damage.
Blade and arm cylinder protection.
Burst-proof sheaths, pipes
protected with a metal coil and
“multilayer cut-proof” bucket
control pipes.
VXE series
29-03-2010
18:29
Pagina 7
Weight 1180 kg
ideal for transport
on trucks in the
3.5 ton category
HYDRAULIC CIRCUIT
The circuit includes two variable capacity
pumps integrated with the Straight Travel
system on the blade section, and a separate
gear pump for the servo-controls, thus
guaranteeing a perfect balance of operating
speed and force. Precise and simultaneous
manoeuvres are assured with no loss of
power or drop in engine speed.
The 12VXE succeeds in moving forward
while performing working operations
without losing any linearity in the trajectory.
AUXILIARY HYDRAULIC LINES
The auxiliary hydraulic circuit for
hydraulic attachments such as a
hydraulic breaker, shears, hydraulic
grippers and drills is supplied as
standard as far as the 2nd arm.
A deviator valve selects single - or
double - action operation.
WORKLIGHT
The arm mounts a
worklight for a perfect
view of the dig.
ASYMMETRIC ARM
The 12VXE is a zero
tail-swing model with the
arm position markedly
asymmetrical with the fifth
wheel, which increases
the operator’s view of
the dig. The swing unit
is optimally canted for
off-axis digging.
VXE series
29-03-2010
18:29
Pagina 8
17VXE
Mini-excavator:
where others cannot reach
The mini excavator 17VXE, the new ultra-compact model, utilizes
the technology of higher class machines. Power and speed of
excavation are assured when working in confined spaces: in small
restructuring work, in operations of excavation and maintenance
of sewerage systems, in tunnels where larger machines cannot
operate, but also in the gardening and nursery sector.
3TNV70 YANMAR 14HP DIESEL ENGINE
The 3-cylinder engine has a low speed of rotation and
a reduced exploitation index to improve durability and
reliability over time. The air filter with its high filtering
capacity is composed of a double cartridge that
reduces maintenance and increases the reliability
of the engine. The fuel circuit is equipped with a diesel
filter with a water separator, ensuring a long engine
life. The high efficiency of the engine combined with
an advanced hydraulic system ensures low fuel
consumption and less noise and it limits polluting
emissions according to the antipollution requirements
of the 97/68/EU regulations.
TWO TRAVELLING
SPEEDS
The two travelling speeds
(2.1/4.0 km/h) enable
moving quickly on site
along with maximum
manoeuvrability.
SAFETY
The canopy ensures a full view for the operator.
The boom movements are softened by the Anti-Shock
valve in the hydraulic circuit. In the phase of lifting
the 1st boom the shock of stopping at the boom’s limit
stop is reduced by the cylinder shock-absorbing
system. A similar system comes into action in the
phase of fifth wheel rotation as well.
The self braking motor prevents accidental movement
when the operator is away. The pedals controlling
the auxiliary circuit and swing are separate and
strengthened with sturdy guards with the function
of a footrest.
VXE series
29-03-2010
18:29
Pagina 9
REAR FRAME WITHIN CLEARANCE
While slewing, the chassis frame turns within
the clearance of the tracks with the carriage
extended, allowing greater safety for the machine
and for the operator. If the carriage is closed
access into confined spaces is facilitated.
It is available in the rubber track or iron track
version, with a canopy with 4 pillars with
TOPS-FOPS protection (conforming to EU safety
regulations).
SOLIDITY AND STABILITY
The long carriage (1570 mm)
besides helping reduce the specific
pressure on the ground also
ensures great front stability even
with the blade raised.
The travelling unit is integrated in
the width of the tracks.
FULLY VERSATILE
The special geometry of the boom and the
movement combined with the minimal distance
between bucket and dozer blade enable
excavating and loading materials of a large size
even close to the dozer blade.
VXE series
29-03-2010
18:29
Pagina 10
COMPACT SIZE
Front turning radius
.
with swing: 1280 mm
row
nar
in
th
wid
ne
Machi
.
configuration: 980 mm
Technical features
17VXE
Operating weight CG canopy
Bucket width/capacity
Width with carriage closed/extended
Rear turning radius
Maximum digging depth
1710 kg
400 mm / 0.044 m3
980 / 1300 mm
680 mm
2100 mm
VARIABLE GAUGE UNDERCARRIAGE
COMFORT AND SAFETY
The position is comfortable thanks
to the adjustable spring seat,
horizontal adjustment, tilting
backrest and ergonomic layout
of the controls.
It is equipped as standard with
servo-assisted joysticks that ensure
the utmost precision.
Two safety levers control access
to the driving seat and, if lifted,
inhibit all the machine working
and travelling controls.
The instrumentation console is
rational and user-friendly.
Behind the seat there is a document
holder.
980
1300
VARIABLE GAUGE UNDERCARRIAGE
Thanks to the extensible frame (980 - 1300 mm)
the 17VXE ensures considerable safety
and operational stability during side
excavation and lifting operations in
confined spaces or on particularly uneven
or steep ground. Sites with reduced
manoeuvring spaces are no longer a
problem.
OPERATING FLEXIBILITY
When the machine is working with the carriage
closed, the two extensible sections of the
blade are easily stored behind the blade
itself. A lever via a function selector controls
the movement of the blade or the expansion
of the carriage.
HYDRAULIC CIRCUIT
It uses two variable displacement pumps
and two gear pumps, ensuring constant
balancing between operational speed and
working forces. Precise and simultaneous
manoeuvres are assured with no loss of
power or drop in engine speed.
The 17VXE succeeds in moving forward while
performing working operations without losing
any linearity in the trajectory.
VXE series
29-03-2010
18:29
Pagina 11
WORK OUTFIT
The auxiliary hydraulic circuit for using various
hydraulic attachments is installed as standard
up to the 2nd boom. The system uses a valve to
return the oil directly to the hydraulic reservoir.
A pedal locking device enables using
manually controlled hydraulic equipment.
As an optional there is a version with a long
boom to increase the depth of excavation
(max 2310 mm). The second speed push-button
control is provided.
RELIABILITY OVER TIME
The hydraulic pipes of the
undercarriage are covered by
sheaths for protection against
scratching.
The cylinder feed pipes are
all internal to minimize every
kind of damage.
The lifting cylinder is also fitted
with a safety plate.
ACCESS AND EASY MAINTENANCE
The side opening engine bonnet provides easier
access and visibility of most of the engine and allows
easy accessibility to the various components
for operations of daily inspection (oil-filters-belts)
and maintenance.
The battery requires reduced maintenance.
Refuelling with diesel is done via handy and easy
access with a lockable cap.
Checking the operating pressures is facilitated by
quick couplers on the pumps.
VXE series
29-03-2010
18:29
Pagina 12
Photo
in the
taken
may
from
Spec
subje
witho
techn
or m
F
A
C
B
D
E
Working range
12VXE
17VXE
A Maximum dumping height
B Maximum digging depth
C Maximum digging height
D Maximum vertical digging depth
E Maximum digging radius
F Minimum front turning radius
at right boom swing
3052 mm
2010 mm
2173 mm
1487 mm
3456 mm
1530 mm
1290 mm
3810 mm
2350 mm
2760 mm
2010 mm
3990 mm
1580 mm
1340 mm
e
n
l
o
h
j
k
p
i
d
g
m
c
f
b
a
Dimensions (mm)
a
b
c
d
e
f
12VXE
3110
970
1339
417
2277 (1525) 870 (1130)
g
h
i
j
k
l
m
n
o
p
395
469
508
400
70
102
141
552
230
870
n
l
o
h
e
j
k
p
i
d
g
c
m
f
b
a
Dimensions (mm)
a
b
c
d
e
f
g
17VXE
3380
1155
1570
460
2330
980 (1300) 395
h
i
j
k
l
m
n
o
p
615
610
400
150
335
330
680
230
980 (1300)
VXE series
29-03-2010
18:29
Pagina 13
12VXE
Photographs appearing
in the catalogue were
taken for publication and
may differ in some cases
from actual objects.
Specifications are
subject to change
without notice due to
technical improvements
or modifications.
17VXE
General Specifications
STD. Bucket capacity (ISO)
0.025 m3
0.044 m3
STD. Bucket width
400 mm
400 mm
Machine weight R.S. / S.S.* Canopy
1180 kg
1615 / 1675 kg
Operating weight R.S. / S.S.* Canopy
1260 kg
1710 / 1770 kg
Transport dimensions
3100 x 870 x 2280 mm
3380 x 980 x 2330 mm
Gradeability
30°
30°
Ground pressure R.S. / S.S.* Canopy
26.5 / 28.5 kPa
26.5 / 28.5 kPa
Minimum ground clearance
175 mm
175 mm
*R.S. / S.S. Rubber Shoe / Steel Shoe
Engine
The 3-cylinder Yanmar 3TNE68 Diesel engine is water cooled.
Model
Yanmar TNM68
Yanmar 3TNV70
N° cylinders / displacement
3 / 784 cc
3 / 845 cc
Bore x stroke
68 x 72 mm
70 x 74 mm
Max output
18.5 HP at 3600 rpm
19.4 HP at 3600 rpm
Rated output (ISO 1585)
12.9 HP at 2200 rpm (9.5 kW / 2200 min-1)
14.2 HP at 2300 rpm (10.5 kW / 2300 min-1)
Fuel consumption
272 g/kW-h
272 g/kW-h
Engine oil pan capacity
3 lt (Max level)
Electrical System
Voltage
12 V
Battery
12 V - 45 Ah
Alternator
12 V - 20 A
Starter motor
12 V - 0.9 kW
Hydraulic system
The particularly sophisticated hydraulic system integrated with variable displacement pumps and servo-assisted controls ensures
extraordinary manoeuvrability and precision of the movements even when travelling, always maintaining forward movement
in a straight line.
Maximum flow
13.2 lt/min
17.2 lt/min x 2 + 12 lt/min
Max Pressure / Setting
20.6 Mpa (210 kgf/cm2)
20.6 Mpa (210 kgf/cm2)
Control
hydraulic remote control
hydraulic remote control
Double action hydraulic circuit for accessories
Maximum flow
26 lt/min
29.2 lt/min
Set pressure
20.6 Mpa (210 kgf/cm2)
End-of-stroke cushioning
Boom cylinder
rod fully extended
rod fully extended
Slewing system
The turret orientation is assured by a hydraulic motor that operates a fifth wheel with remote greased internal toothing.
Swing speed
8.5 min-1
9.4 min-1
Turntable braking
automatic multi-disc brake
automatic multi-disc brake
Absorption of hydraulic shocks
shock less valve
shock less valve
Bucket performance
Max. bucket digging force (ISO 6015)
15.7 kN (1600 kgf)
Max. arm digging force (ISO 6015)
9.35 kN (950 kgf)
Undercarriage
The extensible lower frame is composed of a welded and machined central body that supports.
The two sliding track frames. The bearings of the rollers and of the tightener wheels are permanently lubricated.
Undercarriage length R.S. / S.S.
1570 / 1550 mm
Variable gauge
870 / 1130 mm
980 / 1300 mm
Crawler shoe width
200 mm
230 mm
Lower / upper rollers for side
3
3
Track tension
tension spring and grease cylinder
tension spring and grease cylinder
Dozer blade size (Width x Height)
870 / 1130 x 230 mm
980 / 1300 mm x 235 mm
Lift above ground
230 mm
Drop below ground
340 mm
Travel system
Each track is operated by a gearmotor composed of a two-speed axial piston engine and an epicyclic reduction gear.
Travel speed (1a / 2a)
2.3 / 4.0 km/h
2.1 / 4.0 km/h
Capacity
Fuel tank
12.5 lt
20 lt
Hydraulic tank
15 lt
19 lt
Engine oil
23 lt
Engine coolant
3.6 lt
Boom swing system
Right swing angle
80°
80°
Left swing angle
50°
55°
Other data
Noise level LwA (2000/14/EC)
93 dBA
92 dBA
VXE series
29-03-2010
18:29
Pagina 14
Posizione
di
Lifting
position
sollevamento
R
Height
Altezza
HH (m)
(m)
H
17VXE Lifting capacity
Front lifting
R 3,5
R 3,0
R 2,5
R 2,0
H Z2
H Z1
H Z3
300
300
-
300
400
400
300
500
400
400
700
300
Side lifting (Ce)
R 3,5
R 3,0
R 2,5
R 2,0
H Z2
H Z1
H Z3
100
100
-
200
200
200
300
200
200
200
300
300
Side lifting (Cc)
R 3,5
R 3,0
R 2,5
R 2,0
H Z2
H Z1
H Z3
100
100
-
100
100
100
100
100
100
200
200
200
(Ce) Crawler width expansion
(Cc) Crawler width contraction
Rotation
axis
Asse di rotazione
Rated load don’t exceed 87% of hydraulic capacity or 75% of stability.
Radius
R (m)
Sbraccio
R (m)
Buckets (applicable to machine)
Bucket capacity
ISO (m3)
Dimensions (mm)
outside teeth (A)
No. of
teeth
Weight Standard arm
(kg)
application
Long arm
application
12VXE - 17VXE
12VXE - 17VXE
12VXE - 17VXE
12VXE - 17VXE
12VXE - 17VXE
12VXE
12VXE - 17VXE
0,020
0,025
0,030
0,040
0,050
0,060
0,075
250
300
350
400
500
600
800
2
3
3
4
4
4
-
25
29
31
36
40
40
50
ditch digging opt
ditch digging opt
ditch digging opt
general digging std
loading opt
-
ditch digging opt
ditch digging opt
ditch digging opt
general digging std
loading opt
ditch clearing opt
ditch clearing opt
Using buckets larger than the standard, where possible, must be done with great caution to avoid tipping the machine over
and damaging structures.
VXE series
29-03-2010
18:29
Pagina 15
STANDARD EQUIPMENT
Support frame
Rubber tracks, width 230 mm
Backfill blade with extensions
Attachment points for lifting, anchoring and towing
Remote lubrication of the fifth wheel and swing cylinder foot
Adjustable track carriage
Engine
Two-phase dry air filter
Electric pre-heating device
Decanter, transparent precleaner and transparent diesel fuel filter
Drainage cap underneath the diesel tank
Plastic diesel tank
Continuous engine speed control
Conforms to the gas emissions regulation 2004/26/EC
Electrical system
Battery 12V - 36 Ah
Fuse box
Driving seat
Spring seat with multiple adjustment options and vinyl cover
Non-slip floor and handle facilitating access to the driving seat
Wrist support
Seat belt
High speed button on blade lever
Travel control pedals
Equipment and monitoring devices
Analogue water temperature gauge
Analogue fuel level gauge
Time meter
Warning light for the following functions: preheating, engine oil pressure,
water temperature, battery charge, fuel level, hydraulic filter blocking,
air filter blocking
Canopy version
FOPS protection against falling objects
TOPS and ROPS protection against tipping and rolling
Hydraulics
Slew brake motor with shock valves
ISO assisted hydraulic controls
Double-action hydraulic control valve. Variable displacement pump
Accessory circuit hoses (double action + return) up to 2nd arm
Hydraulic arm swing control with RH pedal
Track adjustment hydraulic control
Lighting
Work lamp fitted on the arm
Digging and moving equipment
Enbloc arm, length 1650 mm
Rocker arm, length 950 mm
Hydraulic arm swing through 135°
Limit shock absorber on arm cylinder
Remote lubrication of the fifth wheel and swing cylinder foot
Shock valve on arm cylinder
Hydraulic circuits for accessories
Hydraulic circuit for hammer with direct return to the tank
Double-effect hydraulic circuit for accessories
Foldaway control pedal for single and double action
Safety operation
Operating and travel controls lock out when the LH console is raised
to enable the operator to exit
Single key for ignition, diesel tank cap and compartment locks
Provided tool kit
Diesel tank cap with lock and mesh filter
Arm cylinder anti-drift system
Sound alert
Conformity
Machine complies with directive n. 98/37 EEC and subsequent emendations
Noise emissions comply with directive n. 86/662 EEC and subsequent
emendations
Machine complies with EN 474-1, EN 474-5
ROPS protection conforms to EN 13510
TOPS protection conforms to EN 13531
FOPS protection conforms to ISO 10262 standard
Electromagnetic compatibility (EMC) conforms to directive n. 89/336 EEC
and subsequent emendations
OPTIONALS
Digging and moving equipment
Long rocker arm (+ 250 mm)
Rapid attachment of mechanical accessories
Rapid attachment of hydraulic accessories
Buckets, various sizes
Support frame
Steel tracks, width 230 mm
Lighting
2 additional lights
Revolving lamp
Protection of the natural environment
Catalytic converter
Comfort and safety
Electrical hydraulic anti-theft device
Rear counterweight (100 kg)
29-03-2010
18:29
Pagina 16
unleaded.it
VXE series
Cod. G0014 GB_vers.01_March 2010
distributed by
IHIMER Spa
Head offices and plant
Cusona 53037 San Gimignano (Siena) Italy
Phone: +39 0577 951 21 | Fax: +39 0577 982 400
Administration and Sales
53036 Poggibonsi (SI) Via Salceto, 41 - Italy
Phone: +39 0577 951 21 | Fax: +39 0577 938 076
info@ihimer.com | www.ihimer.com
a joint venture
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising