DS-1273ZJ-130(-TRL)
DS-1273ZJ-130(-TRL)
Wall Mounting Bracket for Dome Camera
Order Model:
(with adaptor plate)
DS-1273ZJ-130(-TRL)
Features:




Aluminum alloy material with surface spray
treatment
The outlet hole makes the feature looks better
Better water proof design
Convenient installation coordinating with lower
bowl
Model
Parameters
Appearance
Range of
Application
Material
Dimension
Weight
DS-1273ZJ-130(-TRL)
Wall Mounting Bracket for
Dome Camera (with adaptor plate)
Hikvision White
Suitable for dome camera wall mounting
Aluminum Alloy
Φ132×183.5×228.5mm
870g
φ
83.5
46
13
2
Dimension:
Parameter:
83.5
Notice:

6-M4深8
4φ
8.
5


228.5
The bracket should be installed on flat wall
The wall must be capable of supporting over 3 times as
much as the total weight of the camera and the mount.
The maximum load capacity of the bracket is 4.5KG
158
183.5
Model Suitable:
85.7
120
Unit:mm
DS-2CE5582P(N)-VFIR3,DS-2CE55A2P(N)-VFIR3,
DS-2CE55C2P(N)-VFIR3, DS-2CC5282P-IT3,
DS-2CC52A2P-IT3, DS-2CC5X2P(N)-IR1(IR3)
DS-2CC51X2P(N)-IR1T(IR3T),DS-2CC5182DP-IR1(IR3)
DS-2CC51X2P(N)-IR1(IR3), DS-2CD2312-I,DS-2CD2332-I
Installation Step:
① Choose the appropriate
wall to fix the bracket
and wire
② Fix cap to bracket and
complete wiring
A: Cable entry hole
B: Fastening screw
⑤ Check the hole site and
fix adaptor to cap
⑥ Connect the cable and fix
dome camera to cap
③ Screw up and fix the cap
C: Bayonet of adaptor
⑦ Rotate the dome camera
moderately and screw up the
fastening screw
D: Fastening screw of dome camera
Note: The actual bracket may vary from the picture above.
④ Take adaptor from the
packaging of bracket
⑧ Installation complete
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising