2016 REV. 0416 - Fowler High Precision

2016 REV. 0416 - Fowler High Precision
2016
REV. 0416
NEW!
AutoCal
Electronic Caliper
arage and
Great for G
nments!
Shop Enviro
• Inch/Metric/Fraction reading: .0005"/.01mm/ 1/128"
• Dust, water and oil resistant to IP54 standards making it
great for garage and shop environments
• Heavy Duty frame for extra rigidity and wear
• Direct inch/metric/fraction conversion
• Floating zero
• Super large, easy to read 14 x 52mm display
• 4-way measuring
• Combined thumbrest and thumbroll for fine adjustment
• Includes spare battery and fitted case.
Order Number
74-102-006-0
Description
AutoCal Electronic Caliper
Heavy Duty Transfer Punch Set
Sizes ideal for heavy duty applications.
Simply select the sleeve for the size
required, place it on one of the master
punches for that range and it is ready
to use
• 1/2" - 1" range in 1/64"
• 36 piece set, 3 master punches and 33 individually sized sleeves
• Each sleeve and punch is clearly laser etched with its size
• Simply select the sleeve for the size required, place it on one of
the master punches for that range and it is ready to use
• Punches and sleeve ranges are color coded for easy pairing
• Heavy duty for larger applications
• Punch tips are hardened 48-55 HRC
• Master punches are 4-7/8" in length and sleeves are 1" in length
• 1/4 the weight of a conventional transfer punch set with this
range (approximately 4.5 lbs.)
• Supplied in a fitted, shop hardened case
Order Number
72-482-040-0
2
Description
36 Piece Transfer Punch Set
Prices and specifications are subject to change without notice.
NEW!
Reach
Electronic Brake Drum Gage
Setting Master
Measures most heavy-duty
drums while the wheels are
still mounted on the vehicle.
(fits most applications)
• 4"-20"/100-500mm capacity (internal measurements)
• Inch/metric/fraction conversion
• The included 4" setting master and 4" drum preset
(101.60mm) ensure accurate internal measurements.
• Floating zero sets zero anywhere
• Hold function
• Resolution: 0.0005"/.01mm/fractions in 1/64th" increments
• Accuracy: 0.005"/.13mm
• Dust, water and oil resistant to IP54 standards
• RS232 output for direct computer connection
• Beam has vernier scale to double check reading
• Conversion chart on back of main carriage
• Steel conical contact points
• Carriage lock screw
• Includes fitted case
Order Number
74-150-050
Description
EZ-Drum Reach Electronic Brake Drum Gage
Prices and specifications are subject to change without notice.
3
Reach
Electronic Rotor Gage
NEW!
Features:
• Range: 0-3.25"/0-82.5mm
• Resolution: .0005"/.01mm (fractions in 1/64" increments)
• Solid 1 piece construction
• Water resistant to IP54 standards
• Floating zero
• Twin conical anvils with the ability to measure low points
on both sides of the rotor.
• Includes molded case
Measures
most rotors
while the
wheels are
still mounted
on the
vehicle!
(fits most applications)
Order Number
74-150-005-0
4
Description
Rotocal Reach
Prices and specifications are subject to change without notice.
ELECTRONIC ROTOR GAGE
• Range: 5.5"/140mm
• Reads in inch, metric, and fractions
• Direct inch/metric/fraction conversion
• Resolution: .0005"/.01mm (fractions in 1/64" increments)
• Water resistant to IP54 standards.
• Conical anvil for groove measurement.
• 3.5" jaw depth for larger rotors
• Includes molded case
Order Number
74-150-006-0
74-100-350-0
Description
Rotocal Electronic Rotor Gage
Replacement battery
with TWIN CONICAL ANVILS
• Range: 5.5"/140mm
• Reads in inch, metric, and fractions
• Direct inch/metric/fraction conversion
• Resolution: .0005"/.01mm (fractions in 1/64" increments)
• Water resistant to IP54 standards.
• Conical anvils measure scored surfaces.
• 3.5" jaw depth for larger rotors.
• Includes molded case
Order Number
74-150-004-0
74-100-350-0
Description
Rotocal Electronic Rotor Gage with Twin Conical Anvils
Replacement battery
Prices and specifications are subject to change without notice.
5
with 6" EXTENDED JAW DEPTH
• Range: 5.5"/140mm
• Reads in inch, metric, and fractions
• Direct inch/metric/fraction conversion
• Resolution: .0005"/.01mm (fractions in 1/64" increments)
• Water resistant to IP54 standards.
• 6" jaw depth.
• Includes wooden case
Order Number
74-150-002-0
74-100-350-0
Description
Rotocal Electronic Rotor Gage with 6" Extended Jaw Depth
Replacement battery
ELECTRONIC BRAKE DRUM GAGE
• 4" to 20"/100 to 500mm Capacity
• Inch/Metric/Fraction Conversion
• 4" drum preset
• Zero set
• Hold function
• Preset depth at 1" and 1.5"
• Resolution 0.0005"/0.01mm
(fractions in 1/64" increments)
• Protected to IP54 specifications
• Beam has vernier scale to double check reading.
• Thumb lock
• Direct RS-232 output
• Can be used to check some disc measurements.
• Includes wooden case
Order Number
74-150-020-0
74-100-350-0
6
Description
EZ-Drum Electronic Brake Drum Gage
Replacement battery
Prices and specifications are subject to change without notice.
AUT
DRUM AND ROTOR MEASURING KIT
with
Electronic Caliper
OT
OOL C
R IB
BEST
SELLER!
Drum and Rotor Kit features:
Caliper features:
• Measures disc brakes and up to 12"/300mm or 16"/400mm
on brake drums.
•Range: 6"/150mm
• Includes set of clamps; 4 sets of set screws; 1 Allen wrench;
•Stainless steel frame.
1 set of 3 3⁄4" contact points; 1 set of 3⁄4" cone contact
•Large easy-to-read display.
points & 1 set of 3⁄4" flat contact points in plastic tube.
•Resolution: .0005"/.01mm
•16"/400mm Set includes 1 pair of 2" extensions
•Direct inch/metric conversion.
• 4-way measurement, inside, outside, • When measuring brake drums only, add 8" to
measurement—allows for long cone & jaw widths.
depth and step.
• For use with 6" & 8" calipers.
•Includes molded case.
NOTE: To purchase Drum & Rotor extensions ONLY, see following page .
Order Number
74-101-777-0
74-101-888-0
Description
12"/300mm Drum and Rotor Kit with 6" Xtra-Value Cal
16"/400mm Drum and Rotor Kit with 6" Xtra-Value Cal
DRUM AND ROTOR MEASURING KIT
with dust, water and oil resistant Caliper
Caliper features:
Drum and Rotor Kit features:
• Measures disc brakes and up to 12"/300mm on
brake drums.
• Includes set of clamps; 4 sets of set screws; 1 Allen
wrench; 1 set of 3 3⁄4" contact points; 1 set of 3⁄4"
cone contact points & 1 set of 3⁄4" flat contact points
in plastic tube.
• When measuring brake drums only, add 8" to
measurement—allows for long cone & jaw widths.
• For use with 6" & 8" calipers.
•Dust, water and oil resistant to IP54
specifications.
•Range: 6"/150mm
•Stainless steel frame.
•Direct Inch/Metric conversion.
•Accuracy: .001"/.02mm
•Resolution: .0005"/.01mm
•Large easy to read LCD display.
•4-way measurement, inside, outside,
depth and step.
• Includes molded case.
NOTE: To purchase Drum & Rotor extensions ONLY, see following page .
Order Number
74-100-775-0
Description
Drum and Rotor with Caliper
Prices and specifications are subject to change without notice.
7
12" and 16" DRUM AND ROTOR MEASURING KIT
12" Kit
16" Kit
Drum and Rotor Kit ONLY features:
AUT
OT
OOL C
BEST
SELLER!
R IB
• Measures disc brakes and up to 12"/300mm or 16"/400mm on brake drums.
• Includes set of clamps; 4 sets of set screws; 1 Allen wrench; 1 set of 3 3⁄4"
contact points; 1 set of 3⁄4" cone contact points & 1 set of 3⁄4" flat contact
points in plastic tube.
•16"/400mm Set includes 1 pair of 2" extensions
• When measuring brake drums only, add 8" to measurement
allows for long cone & jaw widths.
• For use with 6" & 8" calipers.
Calipers shown not included.
Order Number
72-010-777-0
72-010-888-0
Description
12"/300mm Drum and Rotor Kit
16"/400mm Drum and Rotor Kit
GROOVE AND RECESS GAGE
• Direct RS-232 output.
• External measurement 0-12" depending on
accessories.
• Internal measurement 1-13/16"—13-1/2"
depending on accessories.
• Resolution: .0005"(.01mm)
• Accuracy: ±.0015"(.04mm)
• Sylvac capacitive measuring system.
Order Number 74-150-012-0
8
• Measures rotors and brake drums.
• Two preset memories.
• Inch/metric conversion.
• Interchangeable anvils for inside/outside
measurement.
• Includes flat and point style contacts & battery.
• Uses 4-48 thread contact points.
Description
Ultra-Cal III Electronic Groove & Recess Gage
Prices and specifications are subject to change without notice.
Range
0-12"
EXTENDED RANGE
DISC BRAKE MICROMETERS
Extended Range Vernier Disc Brake Micrometer:
• Sharp black graduations on satin chrome finish.
• Range: 0.3"-1.7"
• Graduation: .0001"
• Jaw depth: 3.5"
• Ratchet thimble.
• Carbide tipped measuring faces.
• Includes case and measuring standard.
Fits the most popular range
of disc brake sizes!
Order Number
72-234-402-0
Description
Extended Range Vernier Disc Brake Micrometer
Fits the most popular range
of disc brake sizes!
Order Number
72-234-422-0
72-234-423-0
OT
OOL C
BEST
SELLER!
R IB
• Fast, easy-to-read digit counter.
• Range: 0.3"-1.7"/10-45mm
• Digital counter reads .001"/0.01mm sleeve reads
.0001"/0.01mm
• Ratchet thimble.
• Carbide tipped measuring faces.
• Includes case and measuring standard.
AUT
Extended Range Digit Disc Brake Micrometer:
Inch/Metric
Description
Extended Range Digit Disc Brake Micrometer
Extended Range Digit Disc Brake Micrometer—Metric
EXTENDED RANGE DIGIT DISC BRAKE MICROMETER
WITH TWIN CONICAL ANVILS:
Inch/Metric
• Fast, easy-to-read digit counter.
• Range: 0.3"-1.7"/10-45mm
• Digital counter reads .001"/0.01mm sleeve reads
.0001"/0.01mm
• Ratchet thimble.
• Carbide tipped measuring faces.
• Includes case and measuring standard.
Fits the most popular range
of disc brake sizes!
Order Number
72-234-522-0
72-234-523-0
Now
available with
Twin
Conical Anvils!
Description
Extended Range Digit Disc Brake Micrometer
Extended Range Digit Disc Brake Micrometer­—Metric
Prices and specifications are subject to change without notice.
9
VERNIER DISC BRAKE MICROMETER
• Sharp black graduations on satin
chrome finish.
• Range: 0.3"-1.3"
• Graduation: .0001"
• Jaw depth: 3.5"
• Ratchet thimble.
• Carbide tipped measuring faces.
• Includes case and measuring standard.
Order Number
72-234-202-0
Description
Vernier Disc Brake Micrometer
DIGIT COUNTER DISC BRAKE MICROMETER
Order Number
72-234-222-0
72-234-223-0
OT
OOL C
BEST
SELLER!
R IB
AUT
• Fast, easy-to-read digit counter.
• Digital counter reads .001"/.01mm sleeve reads .0001"/.01mm
• Jaw depth: 3.5"
• Ratchet thimble
• Carbide tipped measuring faces.
• Includes case and measuring standard.
Description
0.3"-1.3" Digit Counter Disc Brake Micrometer
7-32mm Digit Counter Disc Brake Micrometer
ELECTRONIC EXTENDED RANGE DISC BRAKE MICROMETER
• Range: 0.3"-1.7"/7-44mm
• Resolution: .00005"/.001mm
• IP54: Water, oil & resistant.
• Jaw depth: 3.5"
• Friction thimble.
• Carbide tipped measuring faces.
• Auto-shutoff.
• ABS/INC measurement.
• Preset recall.
• Direct Inch/Metric conversion.
• Direct RS-232 output
• Includes case and measuring standard.
Fits the most popular range
of disc brake sizes!
Order Number
74-860-434-0
74-902-110-0
10
Description
Electronic Extended Range Disc Brake Micrometer
Type 357 Replacement Battery
Prices and specifications are subject to change without notice.
Order Number
72-520-717-0
72-520-757-0
72-520-730-0
72-520-110-0
OT
OOL C
BEST
SELLER!
Description
Disc and Rotor/Ball Joint Gage
Disc and Rotor/Ball Joint Gage
Disc and Rotor/Ball Joint Gage
Indicator Only
R IB
• Checks ball joint wear and disc rotor runout.
• Checks tire and wheel runout, gear backlash, valve
guide wear, etc.
• Meets state inspection requirements.
• Indicator features 0-1" travel, and .001" graduations.;
Inch/Metric 1"/25mm, .001"/.01mm grad.
• Includes shop-hardened case.
AUT
DISC AND ROTOR/BALL JOINT GAGE
Model
Premium Model
Economy Model
Inch/Metric Model
Inch ONLY (0—1")
DISC AND ROTOR/BALL JOINT GAGE
with X-Proof IP54 Shockproof Indicator
• Checks ball joint wear and disc rotor runout.
• Checks tire and wheel runout, gear backlash, valve
guide wear, etc.
• Meets state inspection requirements.
• Dust, water and Oil resistant Indicator features 0-1"
travel, and .001" graduations.; Inch/Metric 1"/25mm,
.001"/.01mm grad.
• Includes shop-hardened case.
NEW!
Order Number
72-520-767-0
Description
Disc and Rotor/Ball Joint Gage with X-Proof Indicator
Prices and specifications are subject to change without notice.
11
Combo Kit includes both.....
Disc & Rotor/Ball Joint Gage
with Chrome Flex Arm
&
• 14 LED Ultra-Bright flashlight
• Quick release mounting bracket.
• 3 "AAA" batteries included.
• Checks ball joint wear and disc
rotor runout.
• Checks tire and wheel runout, gear
backlash, valve guide wear, etc.
• Corrosion resistant.
• Chrome plated 12" flex arm.
• Meets all state inspection requirements.
• Indicator features 0-1" travel and .001"
graduation
Order Number
72-520-451-0
14 LED Flashlight
with Flex Bar Attachment
Everything packed in a
convenient,
shop-hardened case!
Description
Disc and Rotor Flex Chrome Kit
DISC AND ROTOR COMBO KITS
Combo Kit includes both...
AUT
Disc & Rotor/Ball Joint Gage
OT
&
Digit Disc Brake Micrometer
OOL C
R IB
BEST
SELLER!
• Checks ball joint wear and disc
rotor runout.
• Checks tire and wheel runout, gear
backlash, valve guide wear, etc.
• Mounted to the vise grip the 12"/300mm
flex arm can be set to almost any measuring position desired.
• Indicator features 0-1"/25mm travel, and
.001"/.01mm graduations.
• Measures thickness, thickness variation
and score depth.
• Carbide tipped anvil faces.
• Includes measuring standard.
• Jaw depth: 3.5"/90mm
• Digit counter graduations: .001"/.01mm
• Vernier graduations: .0001"/.01mm
• Measuring range: .300"-1.300"/7-32mm
• Positive locking nut on spindle.
Everything packed in a convenient, shop-hardened case!
Order Number
72-520-222-0
72-520-223-0
12
Description
Inch Disc and Rotor Combo Kit
Metric Disc and Rotor Combo Kit
Prices and specifications are subject to change without notice.
ANYFORM AND ROTOR COMBO KIT
This kit provides a combination of holding applications. Use the vise grip and flex
arm to check ball joint wear, brake and rotor runout. Attach the flex arm to the Anyform base for magnetically mounting on virtually any metallic surface.
Combo Kit includes both...
AUT
Disc & Rotor/Ball Joint Gage
OT
&
Anyform Magnetic Base
OOL C
R IB
BEST
SELLER!
• Checks ball joint wear and disc
rotor runout.
• Checks tire and wheel runout, gear
backlash, valve guide wear, etc.
• Mounted to the vise grip the 12"
flex arm can be set to almost any
measuring position desired.
Everything packed in a
convenient,
shop-hardened case!
Order Number
72-520-700-0
• Indicator features 0-1" travel,
and .001" graduations.
• Fit mag base to any shape or
form.
• Magnetic segments conform to
any odd shape.
• Rigid one piece construction.
• 40 lb. pull.
Description
Anyform and Rotor Combo Kit
DISC ROTOR THICKNESS GAGE
Dial Gage is designed to check wearing of disc rotors.
Also used to determine deviation in thickness of rotors
as well depth of disc-scoring caused by worn brakes.
In compliance with state inspection requirements.
Supplied with 1" setting standard.
• Range .300-1.300"
• Graduation .0005"
• Reading 0-50; 50-0
• Includes conical contact point.
Order Number
72-520-727-0
Description
Disc Rotor Thickness Gage
Prices and specifications are subject to change without notice.
13
Inside, Outside, Depth &
Step Measurement
14
Prices and specifications are subject to change without notice.
Poly-Cal ® ELECTRONIC CALIPER
Polycarbonate
Inch/Metric/Fraction
Caliper
Includes
rement
• Fractional Measu
Display
• Easy-To-Read
• Lightweight
• Range: 6"/150mm
• Polycarbonate Frame
• Large easy-to-read display.
• Resolution .0005"/.01mm
(Fractions by 1/64" increments).
Order Number
74-101-175-0
74-100-350-0
• Absolute/Incremental Measurement
• Direct inch/metric/fraction conversion.
• 4-way measuring
• Accuracy: ±.008"
• Supplied with vinyl pouch.
Description
Poly-Cal Electronic Caliper
Replacement Battery
ELECTRONIC CALIPERS
NEW MODELS!
•Accuracy: ±.001"/.02mm
•Stainless steel frame
•Large easy-to-read display.
•Resolution: .0005"/.01mm
•Direct inch/metric conversion.
• Absolute/Incremental Measurement
•4-way measuring.
•Includes molded case.
Also available with a
Super Large Display with Hold Feature!
Order Number
74-101-150-2
74-101-600-1
74-101-200-1
74-101-800-1
74-101-300-1
74-101-900-1
74-100-350-0
Range
6"/150mm
6"/150mm
8"/200mm
8"/200mm
12"/300mm
12"/300mm Replacement Battery
Display Type
Regular Display
Super Large Display with hold feature
Regular Display
Super Large Display with hold feature
Regular Display
Super Large Display with hold feature
Prices and specifications are subject to change without notice.
15
EURO-CAL
IV
ELECTRONIC CALIPER
•Accuracy: ±.001"/.02mm
• Range: 6"/150mm
• Reads in inch, metric & fractions.
• Resolution: .0005"/.01mm
(fractions in 1/64th increments).
• Direct inch/metric/fraction conversion
Order Number
74-100-330-1
74-100-350-0
• Absolute incremental measurement
• Unique full-size decimal characters.
• Stainless steel frame
• 4-way measuring
• Direct RS-232 output
• Includes molded plastic case.
Description
Euro-Cal IV Electronic Caliper
Replacement Battery
6" and 12" VALUE CAL ELECTRONIC CALIPERS
• Stainless steel frame.
• Direct Inch/Metric conversion.
• Resolution: .0005"/.01mm
• Large easy to read LCD display.
Order Number
74-100-000-2
74-100-112-2
74-100-350-0
• Absolute referencing
• 4-way measurement, inside, outside,
depth and step.
• Includes molded case.
Range
0-6"/150mm Caliper
0-12"/300mm Caliper
CR2032 Replacement Battery
Accuracy
.001"/.02mm
.0015:/.04mm
DUST, WATER AND OIL RESISTANT
ELECTRONIC CALIPER
• Dust, water and oil resistant to IP54 specifications.
• Stainless steel frame.
• Direct Inch/Metric conversion.
• Resolution: .0005"/.01mm
• Large easy to read LCD display.
Order Number
74-100-777-2
74-100-712-2
74-100-350-0
16
• Absolute referencing.
• 4-way measurement, inside, outside,
depth and step.
• Includes molded case.
• Direct RS-232C output
Range
0-6"/150mm Caliper
0-12"/300mm Caliper
CR2032 Replacement Battery
Accuracy
.001"/.02mm
.0015:/.04mm
Prices and specifications are subject to change without notice.
WATER RESISTANT ELECTRONIC CALIPER
from
• Maximum Error: .001"/.02mm
• Inductive measuring system.
• 4-way measurement, inside, outside, depth and step.
• Hardened stainless steel construction.
Order Number
74-100-444-0
74-100-350-0
• Repeatability/Resolution: .0005"/.01mm
• Range: 6"/150mm.
• Direct RS-232 output.
• Direct inch/metric conversion.
• Includes storage case.
Description
6"/150mm Water Resistant Electronic Caliper
Replacement lithium battery (type #CR2032 or BR2032)
PRO-MAX ELECTRONIC CALIPER
• Maximum Error: .001"/.02mm
• 4-way measurement, inside, outside, depth and step.
• Resolution: .0005"/.01mm
• Repeatability: .0005"/.01mm
• Range: 6"/150mm
• Direct inch/metric conversion.
Order Number
74-200-777-1
74-100-350-0
• Temperature range 5 to 40C˚ working; -20 to
60C˚ in storage.
• Hardened stainless steel construction.
• Direct RS-232 output
• Features Absolute/Relative Measuring Modes.
• Hold function
• Includes molded case.
Description
Pro-Max Electronic Caliper
Replacement lithium battery (type #CR2032 or BR2032)
Graduation
0-6"/150mm
ELECTRONIC CALIPERS
• Hold feature
• Preset mode now includes offset for inside jaws.
• All sizes feature fine adjustment screw.
• Resolution: .0005"/.01mm.
• Inch/metric conversion.
• Direct RS-232 output
• Includes wooden case.
Order Number
74-100-312-0
74-100-024-1
74-100-042-1
Range
0-12"/300mm Caliper
0-24"/600mm Caliper
0-40"/1000mm Caliper
Jaw Depth
3.5"
4"
4.9"
Prices and specifications are subject to change without notice.
Accuracy
.002"/.04mm
.003"/08mm
.004"/10mm
17
INCH/METRIC VERNIER CALIPERS
• Range: 6"/150mm
• Graduations: .001"/.02mm
• Jaw depth: 1.6"
• Hardened stainless steel
construction
• Depth rod
• 4-way measurement, inside,
outside, depth and step
• Includes fitted case.
72-058-016-0
72-059-016-0
Order Number
72-058-016-0
72-059-016-0
Description
Inch/Metric Vernier Caliper w/fine adjustment
Inch/Metric Vernier Caliper w/thumb lock
AUT
INCH & METRIC DIAL CALIPERS
OT
OOL C
Inch Model:
• Range: 0-6"
• Range per revolution: .100"
• Graduation: .001"
Metric Model:
• Range: 0-150mm
• Range per revolution: .2mm
• Graduation: .02mm
R IB
BEST
SELLER!
Both Models:
• Thumbroll for rapid setting.
• 4-way measurement, inside, outside, depth and step.
• Hardened stainless steel throughout.
• Knurled lock assures precise settings.
• Adjustable dial.
• Includes fitted case.
Order Number
72-008-007-0
72-015-020-0
Description
Inch Caliper
Metric Caliper
AUT
6" and 12" INCH/METRIC READING DIAL CALIPER
OT
OOL C
R IB
BEST
SELLER!
• Range: 6"/150mm; 12"/300mm
• Graduations: .001"/.02mm
• Dial face reads in both inch
(black) and metric (red).
• Hardened stainless steel
throughout.
• 4-way measurement, inside,
outside, depth and step.
• Covered, stainless steel rack.
• Includes fitted case.
Caliper Face
Order Number
72-030-006-0 72-030-012-0
18
Description
6" Inch & Metric Reading Dial Caliper
12" Inch & Metric Reading Dial Caliper
Prices and specifications are subject to change without notice.
AUT
SHOCKPROOF DIAL CALIPERS with Thumbroll!
OT
OOL C
R IB
BEST
SELLER!
72-008-714-0
72-008-707-0
72-008-712-0
• 4-way measurement
• Solid stainless steel construction.
• Silky smooth movement throughout.
• .100" range per revolution.
Order Number
72-008-704-0
72-008-714-0
72-008-706-0
72-008-707-0
72-008-712-0
Description
Shockproof Dial Caliper
Shockproof Dial Caliper
Shockproof Dial Caliper
Shockproof Dial Caliper
Shockproof Dial Caliper
• .001" reading dial face.
• Tough shockproof design.
• Supplied in shop-hardened case.
Range
0-4"
0-4"
0-6"
0-6"
0-12"
Dial Face Color
White
Black
White
Black
White
T-BAR DEPTH BASE ATTACHMENT
• Easily attaches to
calipers for use in
depth measurement.
• Width: 3"
• Fits most 6" and 8"
calipers.
Caliper shown not included.
Order Number
72-565-700-0
Description
T-Bar Depth Base Attachment
Prices and specifications are subject to change without notice.
19
OUTSIDE MICROMETERS
• .0001" graduations.
• Measuring faces are carbide tipped.
• Friction/ratchet style thimbles.
• Insulated frames.
• Positive lever-locking clamp.
• Sizes over 1" include standard.
• Includes wrench and fitted case.
72-229-201-0
Order Number
72-229-201-0
72-229-202-0
72-229-203-0
72-229-204-0
72-229-205-0
72-229-206-0
Description
Outside Micrometer
Outside Micrometer
Outside Micrometer
Outside Micrometer
Outside Micrometer
Outside Micrometer
Accuracy
±0.00016"
±0.00016"
±0.0002"
±0.0002"
±0.00024"
±0.00024"
Range
0—1"
1—2" w/standard
2—3" w/standard
3—4" w/standard
4—5" w/standard
5—6" w/standard
OUTSIDE MICROMETER SETS
72-229-213-0
Order Number
72-229-213-0
72-229-214-0
Description
Outside Micrometer Set
Outside Micrometer Set
Accuracy
(See individual units)
(See individual units)
OT
OOL C
BEST
SELLER!
R IB
• .0001" graduations.
• Measuring faces are carbide tipped.
• Friction/ratchet style thimbles.
• Insulated frames.
• Positive lever-locking clamp.
• Sizes over 1" include standard.
• Includes wrench and fitted case.
AUT
Range
0-3" w/standards
0-4" w/standards
METRIC OUTSIDE MICROMETERS
72-229-209-0
Order Number
72-229-209-0
72-229-210-0
72-229-211-0
72-229-212-0
Description
Metric Outside Micrometer
Metric Outside Micrometer
Metric Outside Micrometer
Metric Outside Micrometer
• .01mm graduations.
• Measuring faces are carbide tipped.
• Friction/ratchet style thimbles.
• Insulated frames.
• Positive lever-locking clamp.
• Sizes over 25mm include standard.
• Includes wrench and fitted case.
Accuracy
±0.004mm
±0.004mm
±0.005mm
±0.005mm
Range
0-25mm
25-50mm
50-75mm
75-100mm
METRIC OUTSIDE MICROMETER SET
72-229-220-0
Order Number
72-229-220-0
72-229-215-0
20
Description
Metric Outside Micrometer Set
Metric Outside Micrometer Set • .01mm graduations.
• Measuring faces are carbide tipped.
• Friction/ratchet style thimbles.
• Insulated frames.
• Positive lever-locking clamp.
• Sizes over 25mm include standard.
• Includes wrench and fitted case.
Accuracy
(See individual units)
(See individual units)
Prices and specifications are subject to change without notice.
Range
0-100mm w/standards
0-75mm w/standards
OUTSIDE INCH MICROMETER
• Satin chrome finished forged steel frame.
• Microfine black graduations.
• Anvil and spindle hardened and precision ground, with microlapped ends.
• Positive locking clamp.
Order Number
72-235-001-1
• Friction/Ratchet style thimble.
• Carbide faces on anvil and spindle.
• Diameter of measuring faces: .256"
• Graduation: .0001"
• Includes fitted case and wrench.
Description
Outside Inch Micrometer
Range
0-1"
AUT
INCH/METRIC DIGIT COUNTER OUTSIDE MICROMETERS
OT
• Digital counter reads .001"/0.1mm sleeve
reads .0001"/.01mm
• Carbide tipped measuring faces.
• Insulated frames
• Spindle thread is hardened, ground and lapped.
• Ratchet stop thimble on all models.
• Positive locking nut on spindle.
• Sizes over 1" include standard.
• Includes wrench and fitted case.
OOL C
Order Number
72-224-001-0
72-224-002-0
72-224-003-0
72-224-004-0
72-224-009-0
72-224-010-0
72-224-011-0
R IB
BEST
SELLER!
Description
Inch Digit Counter Outside Micrometer
Inch Digit Counter Outside Micrometer
Inch Digit Counter Outside Micrometer
Inch Digit Counter Outside Micrometer
Metric Digit Counter Outside Micrometer
Metric Digit Counter Outside Micrometer
Metric Digit Counter Outside Micrometer
Accuracy
±0.00016"
±0.00016"
±0.0002"
±0.0002"
±0.004mm
±0.004mm
±0.005mm
Range
0-1"
1-2" w/standard
2-3" w/standard
3-4" w/standard
0-25mm
25-50mm
50-75mm
INCH/METRIC DIGIT COUNTER OUTSIDE MICROMETER SET
• Digital counter reads to .001"/.01mm.
• Resolution: .0001" (.01mm on metric set).
• Microfine graduations on satin chrome.
• Carbide tipped measuring faces.
• Ratchet thimble.
• Positive locking nut on spindle.
• Sizes over 1" supplied with standard.
Order Number
72-224-103-0
72-224-104-0
72-224-220-0
Description
Digit Counter Outside Micrometer Set
Digit Counter Outside Micrometer Set
Digit Counter Outside Micrometer Set
Accuracy
(See individual units)
(See individual units)
(See individual units)
Range
0-3" w/standard
0-4" w/standard
0-75mm w/standard
INDIVIDUAL MICROMETER STANDARDS
• Measuring faces .315" diameter.
• Standards come with heat insulating covers.
• Measuring faces hardened and precision ground
with microlapped finish.
• Meets or exceeds Federal accuracy specs.
Metric
Inch
Order Number
Size
72-227-001-1
1"
72-227-002-1
2"
72-227-003-13"
72-227-004-1
4"
Order Number
72-227-221-0
72-227-222-0
72-227-223-0
72-227-224-0
Prices and specifications are subject to change without notice.
Size
25mm
50mm
75mm
100mm
21
XTRA-VALUE II ELECTRONIC MICROMETER
• Jet black, grey enamel finish.
• Large LCD display.
• Resolution: .00005"/.001mm
• Direct RS 232 output.
• Carbide measuring faces.
• Absolute and incremental
modes.
• Ratchet thimble.
• Includes shop hardened case.
FREE!
Ball Attachment
Order Number
74-870-001-0
74-100-350-0
Description
Xtra-Value II Electronic Micrometer
Replacement Battery
Accuracy
±.00016"/.004mm
Range
0-1"/0-25mm
WATER RESISTANT ELECTRONIC MICROMETER
• Protected to IP54 specification.
• Large LCD Display.
• Automatic switch off.
• Resolution: .00005"/.001mm.
• Direct RS-232 output.
•Friction thimble.
• Carbide measuring faces.
• Includes shop-hardened case.
FREE!
Ball Attachment
Order Number
74-860-001-1
74-902-110-0
Description
Water Resistant Electronic Micrometer
LR44 Replacement Battery
Accuracy
±.00016"/.004mm
Range
0-1"/0-25mm
ELECTRONIC OUTSIDE MICROMETER
• Protected to IP54 specifications.
• Rugged steel design
• Large LCD display
• Absolute & incremental modes
• Automatic switch off
• Resolution: .00005"/.001mm
• Direct RS-232 output
• Ratchet thimble.
• Carbide measuring faces
• Includes shop-hardened case.
FREE!
Ball Attachment
Order Number
74-815-001-2
74-902-110-0
22
Description
Electronic Outside Micrometer Type 357 Replacement Battery
Accuracy
±.00016"/.004mm
Prices and specifications are subject to change without notice.
Range
0-1"/0-25mm
ECONOMY DEPTH MICROMETER
• Satin chrome finish
• Base surface hardened, ground & lapped.
• Ratchet thimble.
• Locking clamp.
• .001" Graduation.
• Rod diameter: .176"
• Includes shop-hardened case.
Order Number
Range
72-225-110-00-4"
72-225-112-00-6"
72-225-114-00-4"
72-225-116-00-6"
Graduation
.001"
.001"
.001"
.001"
Base
2.5"
2.5"
4"
4"
AUT
0-6" DIGIT COUNTER DEPTH MICROMETER
OOL C
OT
Order Number
72-225-176-0
72-225-226-0
R IB
BEST
SELLER!
• Range: 0-6"
• Easy to read Digit Counter
• .001" Graduations
• 6 Rods
• Satin chrome finish
• Ratchet thimble
• Locking clamp
• Rod diameter: .176"
• Includes wrench and fitted case.
Description
Economy Digit Counter Depth Micrometer
Economy Digit Counter Depth Micrometer
Base
2.5"
4"
0-22" DEPTH GAGE
Twice the range of competitive products!
• 0-1" travel indicator.
• .001" Graduations.
• Rods connect together for full 22" capacity.
• Satin chrome finish.
• Base size: 4"
• Includes 2 extra points for small hole
applications; one 0.078" dia. x 1" long
and one needle point x 1" long.
• Includes shop-hardened case.
Order Number
72-125-006-1
Description
0-22" Depth Gage
Prices and specifications are subject to change without notice.
Base
4"
23
DEPTH GAGE Inch/Metric/Fraction
•Spring-loaded and hold measurement
button for ease-of-use.
•Super-large display
•Travel: 0-1"/25mm
•Range: 0-16"/400mm
•Resolution: .0005"/.01mm
(Fractions in 1/64" increments).
•Supplied in shop-hardened case.
Order Number
74-225-555-0
74-100-350-0
Description
Xtra-Value Depth Gage
Replacement Battery
TIRE GAGE
For tire tread thickness measurement!
Reads in inch, metric and fractions!
OT
OOL C
BEST
SELLER!
R IB
Order Number
74-225-500-0
74-100-350-0
AUT
• Spring-loaded and hold measurement
button for ease-of-use.
• Super-large display
• Range: 1"/25mm
• Resolution: .0005"/.01mm. (Fractions
in 1/64" increments).
• Supplied in vinyl holster.
• 2.1" base
• .095" diameter rod
Description
X-Tread Tire Gage
Replacement Battery
TIRE TREAD GAGE AND PRESSURE GAGE SET
The X-Tread Electronic Tread Depth Gage
•Reads in Inch, Metric and Fractions!
•Spring-loaded and hold measurement button for ease-of-use.
•Super-large display
•Range: 1"/25mm
•Resolution: .0005"/.01mm,
(Fractions in 1/64" increments).
•Supplied in vinyl holster.
Electronic Tire Pressure Gage
• Portable with key ring attachment
• Hold feature
• Quickly and accurately take
pressure readings.
Order Number
74-225-525-0
74-100-350-0
24
Description
Tire Tread Gage & Pressure Gage Set
Replacement Battery
Prices and specifications are subject to change without notice.
TOOLMAKER UNIVERSAL MEASURING SET
• 6" Dial Caliper - .001" graduations
(Part No. 72-008-007-0 see page 18)
• 0-1" Micrometer - .0001" graduations
(Part No. 72-229-201-0 see page 20)
• 6" Flexible rule with 32nds, 64ths, 10ths
& 100ths graduations
(Part No. 72-300-006-0 page 53)
• All contained in a fitted, shop-hardened
case.
Order Number
72-095-007-0
Description
Toolmaker Universal Measuring Set
AUT
MECHANICS MEASURING SET
OT
OOL C
R IB
BEST
SELLER!
Order Number
72-229-711-0
• 0-6" One-Rev Shockproof Dial Caliper
with .001" graduations on a black dial
face with orange needle (Part No. 72008-707-0 see page 19 )
• 0-1" Outside Micrometer with .0001"
graduations and insulted frame (Part No.
72-229-201-0 see page 20)
• 6" EZ- Read Steel Rule (Part No. 72297-006-0 page 53)
• All contained in a fitted, shop-hardened
case.
Description
Mechanics Measuring Set
ELECTRONIC CALIPER & MICROMETER MEASURING SET
• 6"/150mm Electronic Caliper
(Part No. 74-100-000-2 see page 16)
• 0-1"/25mm Electronic Micrometer
(Part No. 74-870-001-0 see page 22)
• All contained in a fitted, shop-hardened case.
Order Number
74-004-850-0
Description
Electronic Caliper & Micrometer Measuring Set
WATER RESISTANT ELECTRONIC MEASURING SET
• Caliper and Micrometer are protected to IP54
standards.
• 0-6" /150mm IP54 Electronic Caliper
(Part No. 74-100-777-2 see page 16)
• 0-1"/25mm IP54 Electronic Micrometer
(Part No. 74-860-001-1 see page 22)
• All contained in a fitted, shop-hardened case.
Order Number
74-004-877-0
Description
X-Proof Water Resistant Electronic Measuring Set
Prices and specifications are subject to change without notice.
25
IP-54 ELECTRONIC MEASURING SET
• Caliper and Micrometer are protected to IP54 standards.
• All contained in a fitted, shop-hardened case.
6"/150mm Euro-Cal IV
(Part No. 74-100-330-1 see page 16)
• Reads in Inch, Metric and Fractions.
• Resolution: .0005"/.01mm
(fractions in 1/64th increments)
Electronic Micrometer
(Part No. 74-815-001-2 see page 22)
• Range: 0-1"/0-25mm
• Resolution: .00005"/.001mm
Order Number
74-004-875-0
Description
IP54 Resistant Electronic Measuring Set
BLACK FACE MEASURING SET
• Black face Indicator (Part No. 72-562-778-0
see page 37)
• 6" Shockproof Dial Caliper with thumbroll
(Part No. 72-008-707-0 see page 19)
• 0-1" Outside Micrometer
(Part No. 72-229-201-0 see page 20)
• All contained in a fitted, shop-hardened case.
Order Number
72-229-770-0
72-229-710-0
Description
Black Face Measuring Set with Indicator
Black Face Measuring Set without Indicator
DEPTH GAGE AND POLY-CAL ® KIT
Poly-Cal
(Part No. 74-101-175-0 see page 15)
• Range 6"/150mm
• Polycarbonate Frame.
• Resolution: .0005"/.01mm, fractions by 1/64 increments.
Xtra-Value Depth Gage (Part No. 74-225-555-0 see page 24)
•Spring-loaded with a hold measurement
button for ease-of-use.
•Super-large display
•Travel: 0-1"/25mm
•Application range: 0-22"/550mm
•Resolution: .0005"/.01mm
(Fractions in 1/64" increments).
•Supplied in shop-hardened case.
Order Number
74-004-255-0
Description
Xtra Value Depth Gage and Poly-Cal Kit
DEPTH GAGE AND EURO-CAL IV KIT
Euro-Cal IV (Part No. 74-100-330-1 see page 16)
• Range: 6"/150mm
• Water resistant to IP54 standards.
•Resolution: .0005"/.01mm, fractions by 1/64 increments.
Xtra-Value Depth Gage
(Part No. 74-225-555-0 see page 24)
•Spring-loaded with a hold measurement
button for ease-of-use.
•Super-large display
•Travel: 0-1"/25mm
•Application range: 0-22"/550mm
•Resolution: .0005"/.01mm
(Fractions in 1/64" increments).
•Supplied in shop-hardened case.
Order Number
74-004-330-0
26
Description
Xtra Value Depth Gage and Euro-Cal IV Kit
Prices and specifications are subject to change without notice.
SHOCKPROOF DIAL CALIPER & DEPTH ATTACHMENT COMBO
with WOODEN CASE
Available with
White or Black Face.
Shockproof Dial Caliper:
• Tough shockproof design
• 4-way measuring
• Solid stainless steel construction
• Silky-smooth movement throughout
• .100" range per revolution
• .001" reading dial face
Order Number
72-008-700-0
72-008-710-0
72-100-002-0
Depth Attachment:
• Attaches quickly
• Positive locking screw
• Precision-ground contact surface
Packed in a custom-fit
wooden case!
Easy depth measurement!
Description
Combo with 6" Whiteface Shockproof Dial Caliper
Combo with 6" Blackface Shockproof Dial Caliper
Wooden Case Only
& DEPTH ATTACHMENT COMBO
with WOODEN CASE
Depth Attachment:
Xtra-Value Caliper:
• Attaches quickly
• Accuracy: ±.001"/.02mm
Easy depth measurement!
• Positive locking screw
• Range: 6"/150mm
• Precision-ground contact surface
• Large easy-to-read display.
• Resolution: .0005"/.01mm
• Direct inch/metric conversion.
• Absolute/incremental measurement. • 4 way measuring.
Packed in a custom-fit wooden case!
Order Number
74-008-715-0
72-100-002-0
Description
Xtra-Value Caliper & Depth Attachment Combo
Wooden Case Only
Prices and specifications are subject to change without notice.
27
ELECTRONIC PROTRACTOR
The Digi-Pro electronic protractor includes embedded
magnets for unique measurement areas.
On/Off, Zero, Hold and Reverse feature to invert the
display for easier reading in certain situations.
• Embedded 25 lb. pull magnets.
• Full, 360° measuring range.
• Accuracy: ±.2°
• Repeatability: ±.05°
• Resolution: .05°
• Invertible display feature
• Uses standard 3V lithium battery
• US Patent 7,726,034
Ideal for
fabrication applications!
USE THE DIGI-PRO TO MAKE FAST AND ACCURATE
ANGULAR MEASUREMENTS
Order Number
74-440-740-1
74-440-775-1
74-100-350-0
Range/Description
4" Digi-Pro Electronic Protractor
12" Digi-Pro Electronic Protractor
Replacement battery
STRAIGHT EDGES
• Made of selected steels.
• Hardened for superior wear resistance.
• Matched to precision masters to insure precision.
• Width and thickness have been carefully determined to provide optimum
rigidity-to-weight ratios.
Order Number
Length
72-480-050-018"
72-480-055-024"
72-480-060-036"
28
Width
1.320"
1.675"
2.730"
Straightness
.0003"
.0003"
.0004"
Prices and specifications are subject to change without notice.
Thick
.150"
.170"
.225"
DIGI-LEVEL
The Xtra Value Digi-Level provides instant 360° digital inclination display of any angle, aluminum housing, with large LCD, reading hold, absolute 0° at sea level.
• Measuring Range: 360° (4 x 90°)
• Resolution: .05°
• Accuracy: ± .2° maximum error
• Repeatability: ±.05°
• Dimension: 4" L x 1" W x 3" H
• Voltage: Standard 9V Battery
• Battery Life: up to 250 hrs.
• Operating Temp: -5°C to 50°C (23°F to 122°F)
• Storage Temp: -20°C to 65°C (-4°F to 176°F)
• Weight: 1.1 lbs.
(angle block
not included)
Order Number
74-422-444-0
Description
Xtra-Value Digi-Level
9" ELECTRONIC LEVEL
Fowler's 9" Laser Level provides instant 4 x 90° digital inclination display. With embedded
magnets on its measuring surface, a beam splitter projects a 90° laser cross hair for leveling ata-distance. It also includes a 1/4-20 mount for tripod use.
• Measuring range: 4 x 90°
• Resolution: .05°
• Accuracy: ±.1°
• Repeatability: ±.05
• Standard 9 volt battery
(250 hours life)
• Dimensions: 9"L x 1"W x 2-1/4"H
• Includes two-way level and plumb
vials.
• Reversible reading for inverted
use.
(bar not included)
Order Number
74-440-600-0
Description
Xtra-Value 9" Electronic Level
The mini-MAG Protractor provides instant 360° digital inclination display of any angle with the
additional unique feature of embedded magnets on both sides and the bottom which make it
ideal for a variety of measurements.
•
•
•
•
•
•
•
•
Embedded magnets with 3.5lb. pull.
Uses standard 9V battery (250 hrs.)
Measuring range: 360° (4 x 90°)
Display inverts.
Resolution: .05°
Accuracy: ±.2°
Repeatability: .05°
Hold feature
Dimensions:
L: 2.375" x W: 1.375" x H: 2.375"
Order Number
74-422-450-1
Display inverts for easy reading!
Description
Mini-Mag Protractor
Prices and specifications are subject to change without notice.
29
Magnetic Bases & Indicators
NEW!
CHROME
with Anyform Base and
Indicator
Flex Arm Anyform Mag Base features:
• Corrosion resistant chrome plated flex arm
• Holds rigidly in almost any position.
• 40 lb. pull magnet
• Versatile—70 steel segments work like a contour gage to
fit the mag base securely to practically any shape or form
X-Proof IP54 Indicator features:
Specifications:
•Robust, shockproof design
•Travel: 1"
•Reading: .001"
•Continuous reading: 0-100
•Tolerance markers
•AGD Group 2, 2-1/4" dia.
•Lugback and carbide point
Protection Includes:
• Rubber bellows on stem.
• O-ring seal on safety cap.
• O-ring protection for bezel
and rotating dial
• Sealed back plate
All in a shop-hardened case.
Order Number
72-585-245-0
72-585-255-0
30
Description
Chrome Flex Mag w/Anyform Base and X-Proof Indicator Set
Chrome Flex Mag w/Anyform Base and X-Proof Indicator Set
Prices and specifications are subject to change without notice.
Dial Face Color
White
Black
MAGNETIC BASE & WHITE FACE INDICATOR
WITHOUT FINE ADJUST
Magnetic Base (72-585-005):
•
•
•
•
•
•
Accepts all AGD dial indicators.
Base dimensions: 2" x 2-11/32" x 1-13/16"
V-base for placing on round surfaces.
Mounts test indicators with 1/4" posts.
Magnet features 85 lb. pull.
On-Off lever release magnet.
Indicator (72-520-110):
• Range: 0-1"
• Graduation: .001"
• Meets AGD specifications
• Continuous reading 0-100
• Revolution counter
•Tolerance indicators
Order Number
72-585-115-0
72-520-110-0
72-585-005-0
Description
Indicator & Base
Indicator Only
Magnetic Base without fine adjust Only
MAGNETIC BASE & BLACK FACE INDICATOR
WITH FINE ADJUST
Magnetic Base (72-585-010):
• Fine adjustment
• Base dimensions: 2" x 2-11/32" x 1-13/16"
• Also mounts test indicators with 1/4" post.
• 85 lb. pull
• On-Off lever release magnet.
• V-base for placing on round surfaces.
Indicator (72-520-109):
AUT
• Range: 0-1"
• Graduation: .001"
• Meets AGD specifications
• Continuous reading 0-100
• Revolution counter
•Tolerance indicators
OT
OOL C
Order Number
72-520-199-0
72-520-109-0
72-585-010-0
R IB
BEST
SELLER!
Description
Indicator & Base
Indicator Only
Magnetic Base w/ fine adjust Only
Prices and specifications are subject to change without notice.
31
FINE ADJUST MAG BASE SET with MAG BACK
With
Electronic Indicator or AGD White face Indicator
Included Magnetic
Indicator Back for
mounting to most
metal surfaces!
Indi-X Blue Indicator features:
• Direct Inch/Metric Conversion
• 1"/25mm travel
• 2-1/4" dial face
• Lugback and 3/8" stem diameter
• Resolution .0005"/.01mm
• Tolerance indicators
• Absolute/incremental reading
• Floating zero
• Carbide tipped point
AGD Indicator features:
• AGD Group 2
• Dial diameter: 2-1/4"
• Travel: 1"
• Reading: .001"
• Continuous reading: 0-100
• Carbide tipped point
Magnetic Base features:
Magnetic Indicator Back features:
• Use for positioning the indicator on most
metal surfaces.
• Protective coating
• 85 lb. pull
• Fine adjustment.
• V-bottom base.
See the Indi-X Blue on page 38!
All in a shop-hardened case.
Order Number
74-585-075-0
72-585-125-0
32
Description
Fine Adjust Mag Base Set with Indi-X Blue Electronic Indicator Set
Fine Adjust Mag Base with AGD White Face Indicator Set
Prices and specifications are subject to change without notice.
ARTICULATING MAG BASE AND INDICATOR COMBOS
Tired of adjusting your flex arm?
More flexibility than
flex-arm type base!
Can be set up in
almost unlimited
positions!
AGD Indicator
• 1" travel.
• Continuous reading: 0-100.
• AGD group 2, 2-1/4" dial diameter.
• Revolution counter
• Tolerance markers
• Lug back mount
• Carbide point
Articulating Mag Base:
AUT
• Adjust in almost unlimited ways.
• Fine adjust
• 85 lb. pull
• V-slot on base for mounting on
rounded surfaces.
OT
OOL C
Order Number
72-585-150-0
72-520-110-0
72-585-008-0
R IB
BEST
SELLER!
Description
Articulating Mag Base & Indicator Combo
AGD Indicator only
Articulating Mag Base only
Indi-X blue FRACTION
Electronic Indicator:
• Direct Inch/Metric/Fraction
Conversion
• Auto Off feature
• 2-1/4" dial face
• Lugback and 3/8" stem mountings
• Resolution .0005"/.01mm/64ths
• Tolerance indicators
• Absolute/incremental reading
• Floating zero
• Carbide tipped point
Articulating Mag Base:
• Adjust in almost unlimited ways.
• Fine adjust
• 85 lb. pull
• V-slot on base for mounting on
rounded surfaces.
Order Number
74-585-250-0
74-520-260-0
72-585-008-0
Description
Indi-X Blue Fraction Electronic
Indicator & Articulating Mag Base
Indi-X Blue Fraction Electronic
Indicator
Articulating Mag Base
Sets includes shop-hardened case!
Prices and specifications are subject to change without notice.
33
FLEX ARM BASE & WHITE FACE DIAL
INDICATOR COMBO
Flex-Arm Mag Base (72-585-015):
•85 lb. pull
• Holds rigidly in any position desired.
• V-base for placing on round surfaces.
• On-Off lever release magnet.
Indicator (72-520-110):
AUT
•1" travel
• AGD group 2
• 2-1/4" dial diameter
• Reading: .001"
• Continuous reading: 0-100
• Revolution counter
• Tolerance indicators
OT
OOL C
Order Number
72-641-300-0
72-520-110-0
72-585-015-0
R IB
BEST
SELLER!
Description
Indicator & Base
Indicator Only
Flex-arm Magnetic Base Only
CHROME
Electronic Indicator or AGD Black face Indicator
Indi-X Blue Indicator features:
• Direct Inch/Metric Conversion
• 1"/25mm travel
• 2-1/4" dial face
• Lugback and 3/8" stem diameter
• Resolution .0005"/.01mm
• Tolerance indicators
• Absolute/incremental reading
• Floating zero
• Carbide tipped point
Included Magnetic
Indicator Back for
mounting to most
metal surfaces!
Magnetic Indicator Back features:
• Use for positioning the indicator on
most metal surfaces.
• Protective coating
All in a shop-hardened case.
Order Number
74-585-100-0
72-585-500-0
34
OT
OOL C
BEST
SELLER!
R IB
Flex Arm Mag Base features:
• Corrosion resistant chrome plated flex arm.
• 85 lb. pull magnet
• Holds rigidly in almost any position.
• V-base for mounting on rounded
surfaces.
AUT
With
AGD Indicator features:
• AGD Group 2
• Dial diameter: 2-1/4"
• Travel: 1"
• Reading: .001"
• Continuous reading: 0-100
• Carbide tipped point
See the Indi-X Blue on page 38!
Description
Chrome Flex Mag and Indi-X Blue Electronic Indicator Set
Chrome Flex Mag and AGD Black Face Indicator Set
Prices and specifications are subject to change without notice.
WATER RESISTANT INDICATOR SET
Magnetic Base (72-585-010):
• Fine adjustment
• Base dimensions: 2" x 2-11/32" x 1-13/16"
• Also mounts test indicators with 1/4" post.
• 85 lb. pull
• On-Off lever release magnet.
• V-base for placing on round surfaces.
X -Proof Indicator (72-520-450):
• Travel: 1"
• Reading: .001"
• Continuous reading: 0-100
• Tolerance markers
• AGD Group 2, 2-1/4" dia.
• Lugback and carbide point
• Robust, shockproof design.
• Rubber bellows on stem.
• O-ring seal on safety cap.
• O-ring protection for bezel and rotating dial.
• Sealed back plate.
Order Number
72-585-155-0
Description
X-Proof Water Resistant Indicator Set
CHROME
WithIndicator
Flex Arm Mag Base features:
• Corrosion resistant chrome
plated flex arm
• 85 lb. pull magnet
• Holds rigidly in almost any
position.
• V-base for mounting on
rounded surfaces
Included Magnetic
Indicator Back for
mounting to most
metal surfaces!
Magnetic Indicator Back features:
• Use for positioning the indicator on most
metal surfaces
• Protective coating
X-Proof IP54 Indicator features:
Protection Includes:
Specifications:
• Rubber bellows on stem.
•Robust, shockproof design
• O-ring seal on safety cap.
•Travel: 1"
• O-ring protection for bezel
•Reading: .001"
and rotating dial
•Continuous reading: 0-100
• Sealed back plate
•Tolerance markers
•AGD Group 2, 2-1/4" dia.
•Lugback and carbide point
All in a shop-hardened case.
Order Number
72-585-450-0
72-585-455-0
Description
Chrome Flex Mag and X-Proof Indicator Set
Chrome Flex Mag and X-Proof Indicator Set
NEW!
Dial Color
White
Black
Prices and specifications are subject to change without notice.
35
Indicator & Mini Mag Set
• AGD group 1 indicator
• 0.250" range
• 0.001" graduations, 0-100 reading
• Tolerance markers
• Carbide contact point
• Mag base with fine adjust (also accepts test indicators with dovetails), base measures 1.8" x 1.2"
• On/off switch for secure holding and easy removal
• 37 lbs. of magnetic pull
• 22 piece contact point set — flat, radius, cone and
spline type contacts
• Fitted aluminum case
NEW!
Order No.
72-585-310-0
Description
Indicator & Mini Mag Set
Holding Systems
8mm stem
52-565-038-0
(Indicator not included)
52-565-036-0
(Indicator not included)
.
• All accept 3/8" indicators
• Mag base and HOLD-TEC with fine adjust
also accepts 8mm indicators
• All have dovetail clamps for test indicators
• Mag base features 2 fine adjusts making
it a 6-Axis Mag Base
• HOLD-TEC can be mounted in drill
chucks, collets, dial gage stands with
8mm mount diameter to make a quick
transfer stand
• Mag base has 180 lb. pull
• Adjust to any position
• Powerful On/Off mag base
For MAXIMUM
• Central locking system
Features
Double Fine Adjust
MACHINIST GRADE!
Order No.
72-585-085-0
72-565-036-0
72-565-038-0
36
Precision
Description
HOLD-Tec Mag Base with Double Fine Adjust
HOLD-Tec without Fine Adjust
HOLD-Tec with Fine Adjust
Prices and specifications are subject to change without notice.
52-585-085-0
(Indicator not included)
ANYFORM MAGNETIC BASE
• Versatile––70 steel segments work
like a contour gage to fit mag base
securely to any shape or form.
• Unlock the cam mechanism and
magnetic segments will conform to any
odd shape.
• Rigid one-piece construction with
permanent powerful magnet holds
securely.
• There's no longer any need to make
extra fixtures to set indicators.
• Unlimited versatility––used with coolant
systems, lamps, etc.
• Side arm clamp holds all AGD dial
indicators and all test indicators with a
1/4" dia. stem.
Order Number
72-585-200-0
Base Width
2-1/4"
Base Height
2-1/8"
Base Depth
1-3/4"
Lbs. Pull
40
A VERSATILE UNIVERSAL & MAG BASE COMBO!
Virtually unlimited positioning
as a Universal Base!
Test Indicator: (72-562-778)
Mag Base: (72-585-000)
• 2 universal ball sockets
• Microfine adjustment screw
• 3-9/16" extension arm
• Dovetail mounting
• Range: .030"
• Reading: 0-15-0
• Jewelled movement
• Graduation: .0005"
• Auto-reversing
• .080" diameter point.
All complete in a shop-hardened case!
Order Number
72-585-105-0
72-585-100-0
Description
Xtra Mag only
Xtra Mag with Test Indicator
Prices and specifications are subject to change without notice.
37
ELECTRONIC INDICATORS
Now available in .5"/12.5mm & 1"/25mm ranges!
•Direct Inch/Metric Conversion
•2-1/4" dial face
•Lugback and 3/8" stem mountings
•Resolution .0005"/.01mm
•Tolerance indicators
•Absolute/incremental reading
•Floating zero
•Carbide tipped point
Low Cost,
High Quality,
Multi-Function
Indicators
Carbide-tipped point!
Order Number
74-520-250-0
74-520-255-0
74-100-350-0
with
Description
1"/25mm Indi-X Blue Electronic Indicator
.5"/12.5mm Indi-X Blue Electronic Indicator
Replacement battery
FRACTIONS
ELECTRONIC INDICATORS
•Direct Inch/Metric/Fraction Conversion
•Auto Off feature
•2-1/4" dial face
•Lugback and 3/8" stem mountings
•Resolution .0005"/.01mm/64ths
•Tolerance indicators
•Absolute/incremental reading
•Floating zero
•Carbide tipped point
Low Cost,
High Quality,
Multi-Function
Indicators
Carbide-tipped point!
Order Number
74-520-260-0
74-100-350-0
38
Description
1"/25mm/Fraction Indi-X Blue Electronic Indicator
Replacement battery
Prices and specifications are subject to change without notice.
AGD INDICATORS
AUT
• 1" travel.
• Continuous reading: 0-100.
• AGD 2 series 2-1/4" dial diameter.
• Revolution counter
• Tolerance markers
• Lug back mount
• Carbide points
OT
OOL C
R IB
BEST
SELLER!
72-520-129
72-520-110
72-520-109
Order Number
Reading
72-520-110-0.001"
72-520-109-0.001"
72-520-129-0.0005"
AUT
INCH METRIC READING
DIAL INDICATOR
OT
MAGNETIC BACK
OOL C
R IB
BEST
SELLER!
• AGD 2 series 2-1/4" dial
diameter.
• Dial face reads in inch (black)
or metric (red).
• Range: 1"/25mm
• Graduation: .001"/.01mm
• Reading: 0-100/0-100-0
• Separated dial for Inch & Metric
• Rotating bezel with clamp
• Lugback included
Order Number 72-530-110-0
Description
Inch Metric Reading Dial Indicator
INDICATORS
NEW!
Magnetic Back
features:
• Use for positioning on any metal
surface.
• Protective coating.
• Can be used with
any indicator on
this page.
Order Number Description
72-585-495-0
Magnetic Back only
72-520-485-0
Magnetic Back w/72-520-110 ind.
TIMING GAGE
Protection Includes:
•Rubber bellows on stem.
•O-ring seal on safety cap.
•O-ring protection for bezel
and rotating dial
•Sealed back plate
Mounts directly in spark
plug hole. Small in size,
it allows the operator to
work in a confined space.
Used on 2 cycle engines
with straight holes. Cannot
be used on spark plug
holes that are angled.
Specifications:
•Robust, shockproof design
•Travel: 1"
•Reading: .001"
•Continuous reading: 0-100
•Tolerance markers
•AGD Group 2, 2-1/4" dia.
•Lugback and carbide point
Order Number Dial Color
72-520-450-0
White
72-520-455-0Black
Dial Face Color
White
Black
White
• Lug back indicator
with 1" travel for
mounting on a mag
base.
• 2 Adaptors: 14mm
and 18mm. Adaptor
can be screwed
down into plug hole.
Order Number 72-520-747-0
Description
Timing Gage
Prices and specifications are subject to change without notice.
39
LONG RANGE INDICATOR TEST SET
AUT
• For direct measurements.
• Rotates for setting at any point.
• Includes mag base with post and dual
diameter rod.
• Includes indicator which features 1"
range; .001" graduations; reading:
0-100; 2-1/4" dial diameter and
includes rod connector and holding
clamp.
• Carbide contact point.
• Includes shop-hardened case.
OT
OOL C
R IB
BEST
SELLER!
Order Number
72-520-707-0
Description
Long Range Indicator Test Set
MAGNETIC BASE & DIAL INDICATOR COMBO
• Includes 1" indicator and mag
base, plus rods, swivel clamp
and case.
• The 2-1/4" diameter .001"
indicator features: satin chrome
finish, tolerance hands, lug back
and revolution counter.
• The 6" high mag base features
a 1.5" x 1.5" x 1.75" 50 lb. pull
base and a 4.5" long sidearm.
All exposed metal is finished
in anodized black for corrosion
resistance.
• Includes shop-hardened case.
Order Number
72-522-101-0
40
Description
Magnetic Base & Dial Indicator Combo
Prices and specifications are subject to change without notice.
Cylinder & Bore Measurement
Prices and specifications are subject to change without notice.
41
DIAL CYLINDER BORE GAGE SETS
with Carbide Anvils
Carbide anvils
• Easy-to-read
• Economical
• Graduation: .0005"
• Chrome plated handle
• Insulated grip
• Includes extension holder and fitted case.
72-646-100-0
72-646-300-0
Order Number
72-646-100-0
72-646-300-0
Description
Dial Bore Gage Set
Dial Bore Gage Set
Range
.7—1.5"
2—6"
EXTENDER 1.4" to 6" or 35 to 160mm DIAL BORE GAGE SET
with Carbide Anvils
Industry's two most popular bore gage
ranges combined in one set!
Carbide Anvils
• Easy-to-read
• Economical
• Graduation: .0005", .0001" or .01mm
• Insulated grip
• 1.4" to 6" range or 35 to 160mm
• Chrome plated handle.
• Includes extension holder
and fitted case.
Order Number
72-646-500-0
72-646-400-0
72-646-220-0
42
Description
Inch X-Tender Bore Gage Set
Inch X-Tender Bore Gage Set
Metric X-Tender Bore Gage Set
Prices and specifications are subject to change without notice.
Graduation
.0001"
.0005"
.01mm
BORE GAGE SETTING MASTER KIT
Fowler's Bore Gage Setting Master Kit is used for accurately setting any bore gage
up to 6" in diameter to an accuracy of .0001".
Each Set includes:
Setting Device
• Base anvil: 2.750" x .80"
• Adjustable anvil 2.375" x .375" (two each)
• Internal capacity: 6"
• Depth capacity: 1"
• Centralizer capacity width: 2.625"
• Quick-release holder for fast adjustment.
Economy Gage Block Set
• Certificate of Calibration to N.I.S.T.
Inch Model
• 36 piece
• Tolerances to ± .00005"
Metric Model
• 33 Piece
• AS-2 grade
High quality aluminum case!
Includes:
Bore gage setting master
&
36 piece gage block set.
All in a high quality
aluminum case!
(Bore gage shown not included.)
Order Number
73-646-000-0
73-646-010-0
Description
Bore Gage Setting Master Kit
Metric Bore Gage Setting Master Kit
EXTENDER-E ELECTRONIC 1.4" to 6" DIAL BORE GAGE SET
Industry's two most popular bore gage ranges
combined in one easy-to-use ELECTRONIC set!
All the same benefits included in the X-Tender Dial Bore Gage are
now available with an electronic indicator providing inch/metric
reading capability, preset size of master for absolute reading
and minimum hold feature to lock on the bore size as the gage is
rocked in the part to be measured.
Bore Gage Features:
• Range: 1.4"-6"/35mm-150mm
• Carbide anvils
• Easily adjustable
• Self-centering
• Includes extension holder.
• Shop hardened case
Indicator Features:
• Dual reading inch/metric electronic
indicator.
• Bar graph and numeric digital display
• Resolution: .00005"/.001mm
Includes FREE
• Preset with recall
Instructional CD!
• ABS/INC measurement
• Min/Max/TIR
For instructional video
search "X-tender Bore Gage" at www.youtube.com
Order Number
74-646-401-0
Description
XTender-E Bore Gage Set
Prices and specifications are subject to change without notice.
43
4" to 12" BORE GAGE
with Carbide Anvils
Carbide Anvils
• 4" to 12" range
• 10" measuring depth
• Easy-to-read
• Economical
• Graduation: .0005"
• Insulated grip
• Chrome plated handle.
• Includes extension holder and wooden case.
Order Number
72-646-600-0
Description
X-tra Range 4" to 12" Bore Gage
2" to 6" RIGHT ANGLE DIAL BORE GAGE
with Carbide Anvils
For measuring main bores, cam bores & other hard-to-reach areas directly!
Carbide Anvils
• Easy-to-read
• Economical
• Range: 2" to 6"
• Graduation: .0005"
• No passing through other bores to measure inboard journals.
• .050" travel in .0005" increments
• Chrome plated handle.
• 3 spacers, 11 probes
• Insulated grip.
• Includes extension holder and fitted
wooden case.
Order Number
72-646-250-0
Description
2" to 6" Right Angle Dial Bore Gage
DIAL CYLINDER BORE GAGE
• Measure cylinder taper and out-ofroundness without removal of the
piston.
• Measure bore diameter to 8" depth.
• Graduations: .001"
• Range: 2.6" to 7"
• Includes gage, contact extensions
and indicator.
Order Number
72-646-200-0
44
Description
Dial Cylinder Bore Gage
Prices and specifications are subject to change without notice.
INSIDE MICROMETERS
• Each set consists of an inside micrometer head
and a series of fully hardened and lapped extension
rods of different lengths.
• Anvil and spindle are hardened and precision
ground with microlap finish on ends.
• Spindle thread hardened, ground & lapped.
• .001" Microfine graduations on satin chrome.
• Positive locking nut on spindle.
• Meets or exceeds Federal accuracy specs.
•Reference standard included with set.
• Includes a wrench and a fitted case.
Order Number
72-243-026-1
72-243-212-1
72-243-220-1
Description
2"-6" Inside Micrometer
2"-12" Inside Micrometer
2"-20" Inside Micrometer
12" TELESCOPING GAGE SET
Another great tool for easy and
accurate measurements. Under
spring tension, the plungers of the
gage expand from the center to the
size of the hole being measured
and are then locked in place using
the knurled knob. Final hole size
is obtained by measuring over
the contacts with a micrometer or
vernier caliper.
NEW!
12" Reach!
• Contact points are constructed of hardened
tool steel, precision ground.
• Double action rigid handle with self-centering feature for quick checking of inside
measurements
• Constant spring tension for uniform feel
• Covers a measuring range of 5/16" to 6"
with measurable depths of 12"
• Includes fitted vinyl case
Order Number
72-470-007-0
Description
12" Telescoping Gage Set
Prices and specifications are subject to change without notice.
45
AUT
TELESCOPING GAGES
OT
OOL C
Another great tool for easy and accurate
measurements. Under spring tension,
the plungers of the gage expand from
the center to the size of the hole being
measured and are then locked in place
using the knurled knob. Final hole size
is obtained by measuring over the
contacts with a micrometer or vernier
caliper.
Order Number
72-470-004-0
72-470-006-0
R IB
BEST
SELLER!
• Double action rigid handle with self centering feature
for quick checking of inside measurements.
• Constant spring tension for uniform feel.
• Contact point ends are hardened tool steel and precision ground on a radius of the smallest hole the gage
will enter.
• Covers a measuring range of 5⁄16" to 6" with measurable depths of 4" to 5".
• Includes fitted vinyl case.
Description
4 piece 5/16" to 2-1/8"
6 piece 5/16" to 6"
Depth
4 to 5"
4 to 5"
TELESCOPING GAGE SET
with Titanium Coated contact points!
• Contact points are constructed of hardened
tool steel, precision ground and Titanium
coated for accuracy and durability.
• Double action rigid handle with self-centering feature for quick checking of inside
measurements.
• Constant spring tension for uniform feel.
• Covers a measuring range of 5/16" to 6"
with measurable depths of 4" to 5".
• Includes fitted vinyl case.
Order Number
72-470-000-0
46
Description
Telescoping Gage Set with Titanium coated contact points
Prices and specifications are subject to change without notice.
SMALL HOLE GAGE SET
• Knurled knob at the end of handle is used for size adjustment.
• Hole size is obtained by measuring over the contact points
with a micrometer.
• The gaging surface is a full-round with a flat bottom.
• This permits use in the smallest of shallow holes, slots and
grooves, etc.
• Gaging surface is fully hardened to ensure long tool life.
• Extra long for gaging deep and shallow slots and similar work.
• The complete set of four gages covers a range of .125"-.500".
• Includes fitted vinyl case.
Order Number
72-472-104-0
Description
Small Hole Gage Set
Range
.125"-.500"
Set of 4 Gages
INTERNAL & EXTERNAL ELECTRONIC CALIPER GAGES
•
•
•
•
•
•
Order Number
74-554-630-0
74-554-730-0
Robust housing
Large LCD display
Reading: .01"/.3mm/1/64ths
Accuracy: .01"/.3mm/1/64ths
Battery: CR2032
Spring loaded with locking nut
Description
Outside Caliper Gage
Inside Caliper Gage
Range
0-6"/150mm
.5-6"/150mm
Prices and specifications are subject to change without notice.
47
72-107 series
72-105 series
Order Number
72-105-006-0
72-106-006-0
72-107-006-0
72-108-006-0
72-115-006-0
72-116-006-0
OT
OOL C
BEST
SELLER!
72-115 series
Description
6" Outside Spring Caliper
6" Outside Spring Caliper with quick nut
6" Inside Spring Caliper
6" Inside Spring Caliper with quick nut
6" Spring Divider
6" Spring Divider with quick nut
DRILL GAGES
72-480-005
Order Number
72-480-005-0
72-480-006-0
72-480-008-0
72-480-010-0
72-480-015-0
72-480-020-0
48
72-480-006
72-480-008
72-480-010
72-480-015
72-480-020
Description
1/16"- 1/2" Jobber Drill-29 holes
1mm - 5.9mm Jobber Drill; 57 holes
1.5mm - 12.5mm Drill Gage; 30 holes
#1—#60 Number Drill; 60 holes
#61—#80 Number Drill; 20 holes
A—Z Letter Drill; 26 holes
Prices and specifications are subject to change without notice.
R IB
• Ends fully rounded on Outside/Inside Spring Calipers and Spring Hermaphrodite
Calipers.
• Outside Spring Calipers meet Federal Specification Type II, Class I. Inside Spring
Calipers meet Federal Specification Type I, Class I.
• Quick, positive adjustment.
• Spring Dividers meet Federal Specification Type A, Class 2 and supplied with a
plastic point protector. Points fully hardened/tempered. High carbon steel legs heat
treated.
• Adjustment screw centrally located; legs are well balanced with uniform tension.
• Natural polished steel finish.
AUT
SPRING CALIPERS & DIVIDERS
DIAMOND FILE & DEBURRING SET
DIAMOND IMPREGNATED
for use on even the
HARDEST ALLOYS!
Ro
und
Hal
f-R
oun
d
Squ
are
Tria
n
gle
Set includes:
• 1 handle, providing maximum grip comfort.
• 5 piece set of diamond impregnated files consisting of a round,
flat, square, triangle and half-round file, 5-1/2" long
with 2-1/2" length of cut.
• 2 triangular scraper/deburring tools (single and double ended).
• Fitted storage case.
Order Number
72-483-666-0
Fla
t
Description
Diamond File & Deburring Set
SWISS PATTERN FILE SET
Swiss Pattern Files are economically priced and each set includes a fitted case and 12
of the finest quality files in the most popular shapes.
Swiss Pattern Files are fine precision
cutting tools used by tool and die
makers, model makers, delicate instrument and part finishers for a variety of
filing jobs. Made to closer tolerances
than American pattern files, they are
primarily finishing tools for removing
burrs, trueing narrow grooves, notches,
keyways, cleaning corners, smoothing
small parts and similar jobs.
Order Number
75-130-060-0
75-130-062-0
Description
12 pc. Swiss Pattern File Set
12 pc. Swiss Pattern File Set
Length
6"
6"
Prices and specifications are subject to change without notice.
Cut No.
#0
#2
49
TRANSFER PUNCH SETS
AUT
• Punches are made of hardened and tempered tool steel, black oxide finished.
• All sizes are marked on index base and
diameters are slightly undersized for easy
handling.
• Supplied with index stand
R IB
Description
28 Piece Transfer Punch Set
33 Piece Transfer Punch Set
OOL C
BEST
SELLER!
NEW Set!
Punches up to 1"
Order Number
72-482-028-0
72-482-030-0
OT
Range
3/32" - 1/2"
1/2" - 1"
HEAVY DUTY AUTOMATIC CENTER PUNCH
• Knurled steel handle.
• Moveable components made of hardened steel.
• Point easily removed for sharpening.
• Features adjustable compression for marking a variety of materials.
Order Number
72-500-290-0
Description
Heavy Duty Automatic Center Punch
UNIVERSAL TRANSFER PUNCH
NEW!
• Covers a large range with just 1 punch
• Spring loaded assures perfect hole center
alignment
• Self centering
• Made of hardened tool steel
Order Number
52-482-001-0
52-482-002-0
50
Description
1/4" - 3/4" Universal Transfer Punch
1/4" - 11/16" Universal Transfer Punch
Prices and specifications are subject to change without notice.
SPARK FREE BRASS DRIVE PIN PUNCH SET
• Made of brass.
• Punch section centerless ground.
• Length is 4".
• Hexagonal body style.
• Used in spark-free environments.
• Point sizes 1/16", 3/32", 1/8", 5/32", 3/16",
7/32", 1/4" and 5/16".
• Includes fitted case.
Order Number
72-500-068-0
Description
8 Drive Pin Punch Set
EXTRA LONG DRIVE PIN PUNCH SET
• Black nitrate finished housing. Made of chrome
alloy steel. Hardened on both ends.
• Knurled finger grip. Length is 8".
• Point sizes: 1⁄8", 3⁄16", 1⁄4", 5⁄16" and 3⁄8"
• Includes fitted case.
Order Number
72-500-300-0
Description
Extra Long Drive Pin Punch Set
CENTER PUNCH SET
• Housing finished in black nitrate.
• Chrome alloy steel; hardened both ends.
• Knurled finger grip for easy handling.
• All sizes marked for fast and easy use.
• Point sizes 3⁄64", 5⁄64", 7⁄64", 9⁄64" and 11⁄64"
• Includes fitted case.
Order Number
72-500-015-0
Description
Center Punch Set
Prices and specifications are subject to change without notice.
51
COMBINATION SQUARE & COMPONENTS
• Blades are chrome plated, fully hardened
and tempered, graduated in 8ths, 16ths,
32nds and 64ths.
• Finished in baked blue enamel.
• Square head has level and scriber point.
• Double indexed protractor is graduated
180° in both directions.
Protractor Head
AUT
Blade
OOL C
R IB
BEST
SELLER!
Center Head
Square Head
OT
Square Sets
Order Number
72-386-006-0
72-373-012-0
72-370-012-0
Description
Square and Center head with 6" blade
Square head with 12" blade
Square, Protractor and Center Head with 12" blade
Order Number
Blades––Inch Series:
72-400-012-0
Blades––Metric Series:
72-400-015-0
Order Number
Heads:
72-410-010-0
72-415-010-0
72-421-000-0
Blade Size
Graduation
12"
1/64", 1/32", 1/16", 1/8"
300mm
Description
1mm, 0.5mm/32nds & 64ths
Accepts Blade Size
Square Head
Center Head
Reversible Protractor Head
12"
12"
12"
Components
EZ-READ BLACK RULES
• Hardened stainless steel.
• White easy-to-read microfine
graduations against black non-glare
finish.
72-307-006-0 (Front)
(Back)
72-379-006-0 (Front)
(Back)
5R:
E/M:
Order Number
72-307-006-0
72-379-006-0
52
GRADUATIONS
32nds, 64ths, 10ths, 100ths
.5mm, 1mm, 32nds, 64ths
Description
Black EZ Read Rule
Black EZ Read Rule
Size
6"
6"/150mm
Now available the
TWO MOST POPULAR
Automotive Graduations!
Type
Flexible
Flexible
Prices and specifications are subject to change without notice.
Graduation
5R
E/M
FLEXIBLE STEEL RULES
• Hardened stainless steel.
• Etched, non-glare, black finish.
• 5R graduations: 32nds and 64ths, 10ths and 100ths.
• 4R graduations: 8ths, 16ths, 32nds & 64ths
• Flexible rules: .020" thick.
• Gold rules are titanium coated.
FLEXIBLE STEEL RULES
Order Number
Finish
Size
Reading
Black
6"
4R
72-295-006-0
Satin Chrome
72-299-006-0
Golden
72-297-006-0
6"
6"
72-295-012-0
Satin Chrome
12"
72-299-012-0
Golden
12"
72-297-012-0
Black
72-300-006-0
Satin Chrome
72-309-006-0
Golden
72-307-006-0
12"
6"
Black
6"
6"
4R
4R
4R
4R
4R
5R
5R
5R
72-300-012-0
Satin Chrome
12"
5R
72-309-012-0
Golden
12"
5R
72-307-012-0
Black
12"
5R
AUT
6"/150mm POCKET STEEL RULE
OT
OOL C
R IB
BEST
SELLER!
• Rounded edge prevents damage to shirt pocket. • Rule width: .470"
• Inch graduations are in 64ths.
• Rule thickness: .021"
• Metric scale is in 1mm increments.
Order Number
72-380-100-0
Description
6"/150mm Pocket Steel Rule
METAL ETCHING PEN
A "must" for any tool room and machine shop for general marking purposes, Fowler's metal etching
pen is used on copper, copper alloy, stainless steel, hardened steel tools and castings, etc.
Use it to initial personal tools. Its low-cost, disposable
design offers limitless applications.
Order Number
72-730-005-0
Description
Disposable Felt Tip Metal Etching Pen. Overall length is 6-1/4"
Prices and specifications are subject to change without notice.
53
2 IN 1 SCRIBER & CENTER PUNCH
• Contains a carbide tipped
scriber and a steal center
punch all in 1 tool
• Carbide tip is reversable for
double the life
• Knurled finger grip
• 1/8" center punch tip
• Supplied with convenient
pocket clip
Remove Scriber Tip To Access
Center Punch Below!
NEW!
Order Number
72-500-060-0
Description
2 in 1 Scriber & Center Punch
CARBIDE TIPPED SCRIBER VALUES!
• Lightweight • Retractable carbide tip • Knurled grip • Machined aluminum body • Pocket clip
Order Number
72-500-050-0
72-500-055-0
Description
Carbide Super Scriber
Carbide Refills
Overall Length
6.5"
• Lightweight • Retractable carbide tip • Fluted grip • Blue anodized aluminum body • Pocket clip
Order Number
72-500-000-0
72-515-046-0
• Heavy duty
Order Number
72-500-080-0
72-500-085-0
• Heavy duty
Order Number
72-500-090-0
54
Description
Pocket Carbide Scriber
Carbide Refills
• Replaceable carbide tip
• Knurled grip
Overall Length
6.0"
• Pocket clip
• Magnetic end cap
Description
Replaceable Tip Carbide with magnetic end cap
Carbide Refills
• Fixed carbide tip
• Pencil-like design
Description
Fixed Tip Scriber
Prices and specifications are subject to change without notice.
Overall Length
5.75"
• Pocket clip
Overall Length
6.0"
DISPOSABLE DEBURRING TOOL
with Pocket Clip
Disposable deburring tool includes S-10 blade for steel,
aluminum and plastic mounted in an aluminum handle
Order Number
72-483-125-0
Description
Disposable Deburring Tool
DEBURRING CUTTERS
• "Quick-change" thumb operated button for instant removal, insertion
and locking of new blades.
• Supplied with three blades: 1) for steel and aluminum, 2) for brass
and cast iron, 3) for straight edges on all types of metals.
• Hollow handle with a removable end cap for storage of blades.
• Unique rounded head blades for safe deburring of drilled and
machined holes, end milled areas, tubing, backside of holes and an
almost unlimited amount of uses.
• Curved blades swivel freely to automatically follow
shapes, contours and holes.
• Molded to comfortably fit the user's hand
without slippage or fatigue.
Order Number
72-483-003-0
Description
Adjustable Scraper & Deburring Cutter with three blades
RAPID BURR
• "Quick-change" thumb operated button for instant removal,
insertion and locking of new blades.
• Supplied with a blade for steel and aluminum.
• Unique rounded head blade for safe deburring of drilled and
machined holes, end milled areas, tubing, backside of holes
and an almost unlimited amount of uses.
• Curved blades swivel freely to automatically
follow shapes, contours and holes.
• Adapts to all S-blades
• Molded to comfortably fit the
user's hand without slippage
or fatigue.
for steel & aluminum
Order Number
72-483-025-0
Description
Rapid Burr
Prices and specifications are subject to change without notice.
55
4 PIECE DEBURRING CUTTER SET
4pc Deburring Cutter Set features four separate color coded cutters.
Each color indicates the material that the cutter is intended for.
• Colored sleeves rotate to lock and unlock blades
for easy changing.
• Unique rounded head blades for safe deburring
of drilled and machined holes, end milled areas,
tubing, backside of holes and an almost unlimited amount of uses.
• Curved blades swivel freely to automatically
follow shapes, contours and holes.
for aluminum
for brass
AUT
for steel
OOL C
R IB
BEST
SELLER!
for plastic
Order Number
72-483-777-0
For replacement blades see Fowler's Main Catalog
OT
Description
4 pc. Deburring Cutter Set
AUT
UNIVERSAL DEBURRING, CLEANING & COUNTERSINK SET
A complete kit for the Auto Repair Professional!
OT
OOL C
R IB
BEST
SELLER!
Set includes:
• 1 Universal Handle
• 2 Adapters
• 2 Deburring Blades
• 1 Countersink for 20mm/.47" diameter.
• 1 Countersink for 30mm/1.18" diameter.
Order Number
72-483-888-0
56
• 4 Cleaner Blades, for sheet metal,
small ridges, relieving corners and for
narrow slots.
• Combined in a compact molded case.
Description
Universal Deburring, Cleaning & Countersink Set
Prices and specifications are subject to change without notice.
3 PIECE DEBURRING CUTTER SET
• Most economical
• 3 deburring tools
• Blades are replaceable
• 3 different blades from heavy duty
to extra fine.
for brass & cast iron
for steel & aluminum
for plastic
Order Number
Description
72-483-555-0
3 pc. Deburring Cutter Set
For replacement blades see Fowler's Main Catalog
UNIVERSAL MAGNETIC MINI FLEX BAR
with LED Flashlight
This product is ideal for
focused applications in
Industrial and Automotive!
• Zoomable 150 lumens Ultra-bright flashlight
with 3 modes; bright, dim and flashing
• Powerful, low-profile magnetic base
• Slim, articulating flex bar allows easy and
accurate positioning.
• Quick releasemounting bracket clamp
• Batteries included
Order Number
72-630-451-1
Description
Universal Magnetic Mini Flex Bar with light
DEEP HOLE LIGHT
• Deep Hole Light permits viewing in deep holes, around
corners, under grooves, etc.
• Includes battery case for 2 penlight batteries and a battery case for one battery for use where space is limited;
batteries not included.
• Features a positive switch. Curved and straight light conveying devices place intense illumination at their ends
directly on the bottom of the hole being viewed. A small
mirror permits viewing in a manner similar to a dentist
examining teeth.
• Includes plastic case.
Order Number
72-270-000-0
Description
Deep Hole Light
Prices and specifications are subject to change without notice.
57
AUT
SCREWDRIVER KIT
OT
OOL C
R IB
BEST
SELLER!
• This precision Screwdriver and Tool Set is
ideal for miniature work.
• Features knurled and chromed swiveling
handles.
• Screwdriver and Tool Set contains 9 screwdrivers, 1 tapered point scratch awl and 1
magnetic pick-up tool.
• Screwdriver size range: #00, #0, #1, 1⁄32",
3⁄64" 1⁄16", 5⁄64", 3⁄32" and 1⁄8".
Order Number
72-490-003-0
Description
Screwdriver Kit
V-BLOCK SET
2 each @:
• Dimensions: 1-1/2" L x 1-1/4" W x 1-1/4" H.
• Work capacity: Approximately 1"
2 each @:
• Dimensions: 2" L x 1-1/2" W x 1-1/2" H.
• Work capacity: 1-1/2"
All feature:
• Surfaces are square and parallel within
.0005".
• V-grooves are square and parallel with all
surfaces within .0005".
• Corresponding dimensions for each pair
are alike within .0005".
• All enclosed in shop-hardened case.
Order Number
72-475-500-0
Description
X-Blox V-Block Set
RECTANGULAR HEAD PROTRACTOR
• Measures angles from 0-180 degrees.
• Used to transfer angles and to set bevels.
• 6" arm with knurled thumb lock nut.
• Made of chrome steel with satin finish.
• Measures 3-5/16" x 2". Rectangular head provides four working edges.
Blade secured firmly at any angle by a lock joint and knurled nut.
Order Number
72-450-010-0
58
Description
Rectangular Head Protractor
Prices and specifications are subject to change without notice.
VALVE SEAT RUNOUT GAGES
Small, compact dial gages designed to measure valve seat runout
on most gasoline engines including automobiles, motorcycles,
outboard and inboard engines, trucks, snowmobiles, etc. Valve
seat runout tolerances for engines are within ±.001".
Gage should be positioned on pilot, adjustable probe should be
set on the valve seat and the gage is then turned 360°. A complete
range of adaptors are available for different pilots. Gage contains
jewelled bearings.
AUT
• Range .200"
• Graduation .001"
• Reading 0––50––0
OT
OOL C
Order Number
72-644-000-0
72-644-200-0
Description
Valve Seat Runout Gage
Valve Seat Runout Gage
R IB
BEST
SELLER!
Adaptor Size
3/8"
3/8" + .010"
For Pilots*
Black & Decker, K.O.Lee, Neway, Olcott
Sioux
FAST, CAM
-L O
C
NG
KI
ACTION!
Cam-Locking Tap Wrench
3-times the Range of Most Tap Wrenches!
1/8" to 1/2" (3 to 12mm)
QUICK RELEASE CAM!
FAST & TIGHT!
Features:
ST
,C
LOCKING A
AMCT
IO
N!
• Fits wide range of tap sizes: 1/8" to 1/2" (M3 to M12)
• Patented Revolutionary Cam-Lock System.
• Quick-action clamping for easy replacement.
• Taps will never release during use.
• Heavy-duty design for reliability and long life.
• Handles extreme torque.
• Can be used as a hand drill for sizes: 1/16" to 5/16"
FA
CHANGE TAPS FAST!
For instructional video
search "Tap-X" at www.youtube.com
Order Number
72-492-350-0
Description
Tap-X Cam-Locking Tap Wrench
Prices and specifications are subject to change without notice.
59
al Re
ach
Cal
See these and other
great NEW products
inside!
Roto
c
Auto
Fowler High Precision
Fowler High Precision
FowlerVid
Fowler_Co
Find us on social media!
Fowler High Precision
www.FowlerPrecision.com
Xtra-Punch
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising