ice merchandisers - Thermal Manufacturing

ice merchandisers - Thermal Manufacturing
ice merchandisers
Every Thermal Manufacturing, Inc. ice
merchandiser is designed to give you
handsome, hard-working merchandising
value. They are designed for
contemporary beauty and are available
in a variety of finishes to enhance your
store’s décor inside or out. They are built
for efficiency and durability.
See chart on
back cover for
merchandiser
specifications.
Indoor and Outdoor
Merchandiser Features:
•
Heavy-gauge Paint Tite® galvanized steel
•
Baked on urethane paint (all indoor
models are painted on the inside)
•
CFC free polyurethane foam insulation three full inches on top and bottom and
two and a half inches on the sides
•
Trouble-free, environmentally safe
R-404a refrigeration systems
upright-30
•
High-side and low-side service valves
for easy maintenance on all
condensing units
Capacity: 100 – 7lb bags
Dimensions: 79” H x 36” W x 30” D
Compressor: 1/3 HP, 115 V
Door Size: 28” x 47”
•
Heavy-duty door hinges and hardware
•
Available in stainless steel solid or triple
pane glass doors
•
Plastic foot pads for durability and
easier placement inside your
customer’s store
•
Custom colors or heavy gauge vinyl in
white or walnut grain to match your
customer’s specifications are available
•
Five-year warranty on replacement
of compressor
upright-42
UL listed to U.S. and Canadian
safety standards
Capacity: 170 – 7lb bags
Dimensions: 78” H x 50 1/4” W
x 30 1/4” D
Compressor: 1/3 HP, 115 V
Door Size: 28” x 47”
•
Model # U30GS
Model # U42GS
upright-51
Model # U51GS
Capacity: 200 – 7lb bags
Dimensions: 72” H x 58” W x 34” D
Compressor: 1/3 HP, 115 V
Door Size: 28” x 47”
2
upright-60
Model # U60GS
indoor units
Capacity: 235 – 7lb bags
Dimensions: 78 1/2” H x 74 1/2” W
x 30 1/2” D
Compressor: 1/2 HP, 115 V
Door Size: 2 - 28” x 47”
upright-75
Model # U75GS
Capacity: 300 – 7lb bags
Dimensions: 78 1/2” H x 74 1/2” W
x 34” D
Compressor: 1/2 HP, 115 V
Door Size: 2 - 28” x 47”
upright-100
Model # U100GS
Capacity: 400 – 7lb bags
Dimensions: 76” H x 97 5/8” W
x 34 1/2” D
Compressor: 1/2 HP, 115 V
Door Size: 2 - 28” x 47”
upright-125
with drop-in unit
(Not pictured)
Model # U125GSAD
Capacity: 500 – 7lb bags
Dimensions: 79 3/4” H
x 72 1/2” W x 48 1/4” D
(with drop-in unit 94 3/4” H)
Compressor: 3/4 HP, 115 V
Door Size: 2 - 28” x 47”
drop-in unit
for Model U125GSAD and
Model U170GSAD
Compressor: 3/4 HP, 115 V R-404a
compressing unit, triple fan evaporator
upright-170 with drop-in unit
Model # U170GSAD
Capacity: 680 – 7lb bags
Dimensions: 79 3/4” H x 96 1/4” W
x 48 1/4” D (with drop-in unit 94 3/4” H)
Compressor: 3/4 HP, 115 V
Door Size: 2 - 28” x 47”
Toll free — US & Canada
800-338-3782
3
upright-30
Model # U30SS
Capacity: 100 – 7lb bags
Dimensions: 77” H x 36” W x 30” D
Compressor: 1/3 HP, 115 V
Door Size: 27” x 46”
upright-42
Model # U42SS
Capacity: 170 – 7lb bags
Dimensions: 78” H x 50 1/4” W
x 30 1/4” D
Compressor: 1/3 HP, 115 V
Door Size: 27” x 46”
upright-51
Model # U51SS
Capacity: 200 – 7lb bags
Dimensions: 70 1/4” H x 58” W
x 34” D
Compressor: 1/3 HP, 115 V
Door Size: 27” x 46”
upright-60
Model # U60SS
Capacity: 235 – 7lb bags
Dimensions: 76 1/2” H x 74 1/2” W
x 30 1/2” D
Compressor: 1/2 HP, 115 V
Door Size: 2 - 27” x 46”
upright-75
Model # U75SS
Capacity: 300 – 7lb bags
Dimensions: 76 1/2” H x 74 1/2” W
x 34” D
Compressor: 1/2 HP, 115 V
Door Size: 2 - 27” x 46”
upright-100
Model # U100SS
Capacity: 400 – 7lb bags
Dimensions: 76” H x 97 5/8” W
x 34 1/2” D
Compressor: 1/2 HP, 115 V
Door Size: 2 - 27” x 46”
4
See chart on
back cover for
merchandiser
specifications.
slant-45
Capacity: 175 – 7lb bags
Dimensions: 67 3/4” H x 58” W
x 36” D
Compressor: 1/3 HP, 115 V
Door Size: 27” x 27”
outdoor units
Model # S45SS
slant-61
Model # S61SS
Capacity: 240 – 7lb bags
Dimensions: 66 1/4” H x 72” W
x 36” D
Compressor: 1/3 HP, 115 V
Door Size: 2 - 27” x 27”
low profile slant-61
Model # S61SSLP
Capacity: 240 – 7lb bags
Dimensions: 48 1/4” H x 96 1/8” W
x 35 7/8” D
Compressor: 1/3 HP, 115 V
Door Size: 2 - 27” x 27”
slant-75
Model # S75SS
Capacity: 300 – 7lb bags
Dimensions: 68” H x 96” W
x 36” D
Compressor: 1/2 HP, 115 V
Door Size: 2 - 27” x 27”
Toll free — US & Canada
800-338-3782
5
stainless steel doors
universal stainless steel
replacement door
Include:
Stainless steel outside 26 Ga.
Galvanized steel inside 26 Ga.
Foamed in place insulation
Handle, hasp, & mounting screws
Reinforced in handle, hinge, and stop
chain areas
Replaceable magnetic gasket (not a snap-in)
Latch and pop rivets for mounting on
ice merchandiser
Handle designed so lock won’t rest on
ice merchandiser
•
•
•
•
•
•
•
•
Custom made doors available
for any ice merchandiser.
Call for a quote.
solid
door
gaskets
6
stainless steel
slant
solid door
# 211
hinge and cover
for slant door
spring chainstop
w/ plastic cover
# 218
spring
cartridge
solid door
handle with
pop rivets
stainless steel
upright
solid door
# 220
hinge and cover
for upright door
# 220
spring
assembly
hasp with
pop rivets
painted
rain shield
reversible condenser fan motor
How it works:
“In 1995 we installed Thermal’s
reversible condenser fan motor on all
ice merchandisers located in high traffic
areas. These merchandisers required
repeated trips to the customers location
to clean out the condenser. Since
installing the reversible condenser fan
motor, we have not had to return for
unscheduled maintenance.”
Mike Croft
Hyland Ice Supply
Wilberforce, Ontario
“I had an indoor stop that required
me to blow out the condenser every
six months. Since installing Thermal’s
reversible condenser fan motor 3
years ago, I have never been called
back. I now use the reversible
condenser fan motor on all my
indoor merchandisers and save
money with few unscheduled
service calls.”
Bob Conjelko
Conjelko’s Ice Service
Windber, PA
“I use Thermal’s reversible fan motor on all my indoor merchandisers, outdoor
merchandisers in trouble spots, and on other condensing units on refrigeration
equipment. I tested the head pressure and found that it remains the same even in
reverse and is certainly much better than the head pressure on a dirty condenser.
By keeping the condenser clean, the reversible condenser fan motor saves me
money on service calls and literally pays for itself. I especially appreciate it on those
hot weekends in the middle of July.”
Jim Krier
Krier Refrigeration
Belgium, WI
break down compressor cover
Dimensions: 13 1/2” H x 32” W x 18” D
The compressor cover is made of 24 gauge
painted galvanized steel and is strong
enough to hold the weight of a 200 lb
person. It is shipped in four pieces and we
can fit six complete compressor covers in one
box. The cover can be assembled in just a
few minutes using only a rubber mallet.
This will not only save you money on
shipping but space in your inventory.
6 or 4
hour timer
for AD
evaporator
fan motor
parts
The motor reverses itself every 4 hours for 21 minutes without shutting
down the compressor. While the motor is in reverse, any dust that has
accumulated during this 4 hour period will be cleared out. This will keep
the condenser clean while saving you the time consuming trips to your
customer’s store just to clean out a dirty condenser.
thermostat
with cover for
AD and CW
evaporator
fan blade
evaporator
fan guard
condenser
fan motor
(9 watt)
condensation
complete kit
7
Thermal Manufacturing Inc.
72090 Sharon Road
Bridgeport, Ohio 43912
Toll free all US & Canada:
800-338-3782
Telephone:
740-635-4455
Fax:
740-635-4457
Website:
www.thermalmfg.com
E-mail:
thermalmfg@aol.com
upright
model
30
upright
model
42
upright
model
51
upright
model
60
upright
model
75
upright
model
100
heavyduty
model
100
upright
model
125
upright
model
170
slant
model
45
slant
model
61
low
profile
model
61
slant
model
75
100
170
200
235
300
400
400
500
680
175
240
240
300
30
42
51
60
75
100
100
125
170
45
61
61
75
outside heightoutdoor w/ bonnet
indoor w/ crown
77”
79”
78”
78”
70 1/4”
72”
76 1/2”
78 1/2”
76 1/2”
78 1/2”
76”
76”
76 3/4”
76 3/4”
n/a
79 3/4”
n/a
79 3/4”
67 3/4”
n/a
66 1/4”
n/a
48 1/4”
n/a
68”
n/a
outside width
36”
50 1/4”
58”
74 1/2”
74 1/2”
97 5/8”
97 5/8”
72 1/2”
96 1/4”
58”
72”
96 1/8”
96”
outside depth**
30”
30 1/4”
34”
30 1/2”
34”
34 1/2”
34 1/2”
48 1/4”
48 1/4”
36”
36”
35 7/8”
36”
290 lbs
330 lbs
360 lbs
415 lbs
395 lbs
435 lbs
470 lbs
540 lbs
530 lbs
615 lbs
585 lbs
670 lbs
610 lbs
695 lbs
n/a
886 lbs
n/a
1036 lbs
360 lbs
n/a
470 lbs
n/a
510 lbs
n/a
530 lbs
n/a
1/3 hp
low temp
1/3 hp
low temp
1/3 hp
low temp
1/2 hp
low temp
1/2 hp
low temp
1/2 hp
low temp
3/4 hp
low temp
3/4 hp
low temp
3/4 hp
low temp
1/3 hp
low temp
1/3 hp
low temp
1/3 hp
low temp
1/2 hp
low temp
R-404a
R-404a
R-404a
R-404a
R-404a
R-404a
R-404a
R-404a
R-404a
R-404a
R-404a
R-404a
R-404a
115V 1ph
60 cyl
115V 1ph
60 cyl
115V 1ph
60 cyl
115V 1ph
60 cyl
115V 1ph
60 cyl
115V 1ph
60 cyl
115V 1ph
60 cyl
115V 1ph
60 cyl
115V 1ph
60 cyl
115V 1ph
60 cyl
115V 1ph
60 cyl
115V 1ph
60 cyl
115V 1ph
60 cyl
8 RLA
8 RLA
8 RLA
9.2 RLA
9.2 RLA
9.2 RLA
12 RLA
12 RLA
12 RLA
8 RLA
8 RLA
8 RLA
9.2 RLA
specifications
approx capacity
7 lb bags*
approx
cubic feet
weightoutdoor
indoor
compressor
refrigerant
voltage
running load
AMPs
* Bag capacity may vary depending on size of bag and method of stacking.
** Outside depth based on the cabinet only - additional allowance for door/handle.
All models available in Automatic Defrost or Cold Wall.
All models equipped with a 115 volt, 3 prong grounded electrical
connections with 10’ UL rated power cord.
UL Listed to
U.S. and Canadian
Safety Standards
All 1/3, 1/2 & 3/4 hp models use R-404a refrigerant.
5 year warranty on the replacement of compressor only.
Revised 9/13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising