14-2921-01 slashcut full exhaust system parts included yamaha v

14-2921-01 slashcut full exhaust system parts included yamaha v
14-2921-01
SLASHCUT FULL EXHAUST SYSTEM
YAMAHA V-STAR 250 / VIRAGO 250
1988-2011
PARTS INCLUDED
Description
Qty
00-200-02456
00-200-02457
01-10061606-27
01-4006-27
01-4206-27
Front/Bottom Exhaust Assembly
Rear/Top Exhaust Assembly
3/8-16x3/4” Hex Head Bolt
3/8” Flat Washer
3/8” Lock Washer
1
1
1
1
1
08-50-47338
1)
2)
3)
4)
5)
Part Number
R E V. A
Ref.
E-DUGLQH#6XSHU7UDSSFRP
TECH: (
14-2921-01
SLASHCUT FULL EXHAUST SYSTEM
YAMAHA V-STAR 250 / VIRAGO 250
1988-2011
TOOLS REQUIRED
Ref.
1)
2)
3)
4)
Description
Ref.
3/8” Drive Ratchet
6” Extension
10mm Socket
12mm Socket
Description
5) 14mm Socket
6) 10mm Wrench
7) #30 Torx Bit
INSTALLATION INSTRUCTIONS
NOTE: BEFORE DOING ANY WORK, MAKE SURE THE MOTORCYCLE IS COOL, AND IT IS
SECURE ON A SERVICE LIFT OR THE KICK STAND.
1) Remove the two bolts securing the ignition lock
to the mounting bracket. (Fig. 1)
2) Loosen the bolt securing the rear headpipe
clamp below the motorcycle. (Fig. 2)
3) Remove the two bolts securing the “dummy”
rear headpipe to the bracket on the frame.
(Fig. 3)
4) Remove the two nuts securing the front
headpipe flange to the front cylinder.
Fig. 1
5) Remove the bolt securing the top stock muffler
to the passenger peg mounting bracket. (Fig. 4)
Carefully remove the complete stock exhaust
system, except for the “true” rear headpipe.
6) Remove the two nuts securing the rear
headpipe to the rear cylinder. (Fig. 5) Carefully
feed the rear headpipe through the motorcycle
frame, and remove it.
7) Feed the Jardine rear headpipe up through the
frame, and loosely secure it to the rear cylinder
using the original nuts.
E-DUGLQH#6XSHU7UDSSFRP
Fig. 2
TECH: (
14-2921-01
SLASHCUT FULL EXHAUST SYSTEM
YAMAHA V-STAR 250 / VIRAGO 250
1988-2011
8) Using the original bolt, secure the top muffler
bracket to the passenger peg mount. Do not
fully tighten at this time.
9) Using the original nuts, loosely mount the
Jardine front headpipe to the front cylinder.
10)Using the supplied 3/8-16x3/4” hex head bolt,
3/8” flat washer, and 3/8” lock washer, secure
the bottom muffler to the top muffler. Do not
fully tighten at this time. (Fig. 6)
Fig. 3
11) Position the exhaust system in the best
possible orientation. Fully tighten the headpipe
flange nuts. Then fully tighten the muffler
mounting bolts.
12)Reinstall the ignition lock to the mounting
bracket.
13)Clean the new exhaust system of all
fingerprints and grease. Failure to do so may
prematurely discolor the chrome on the exhaust
system.
14)Start the motorcycle & listen to the beautiful
sound, then go ride!
Fig. 5
E-DUGLQH#6XSHU7UDSSFRP
Fig. 4
Fig. 6
TECH: (
Terms & Conditions
Returns: All requests for product returns must be made within 30 days from date of purchase. The return has to
have a Return Material Authorization (RMA) number from Jardine and must include a copy of the original purchase
invoice. Customer pays for the return freight and Jardine will exchange product or process a credit to your account.
All returns must be in the original packaging to be eligible for any credit or exchange. Any return sent C.O.D. will
not be accepted. Special order sales are final and may not be returned.
All warranty claims must be made through your point of purchase.
Limited Warranty: Jardine’s warranty extends to the original purchaser only and a copy of the sales receipt must
be provided. Keep your receipts. Jardine products are warranted against defective materials and workmanship for
a period of 1 year from date of original customer purchase and to the original customer only. Proof or purchase is
required. Any non-defective, unopened, unused, not installed item may be returned within seven working days of
receipt and will be subject to a 15% restocking / repackaging fee. Bluing and / or discoloration of chrome exhaust
systems / products are not covered. Contact the Jardine Customer Service Department directly at 216-265-8400 to
obtain a Return Material Authorization (RMA) number prior to return of product. Authorized product will be repaired
or returned at Jardine’s discretion. Jardine is not responsible for any other expenses, including labor for removal of
defective parts incurred by the customer under the terms of this warranty. Nor shall Jardine be responsible for any
damages whether consequential, special, contingent or otherwise, or expenses or injury arising from the use of
Jardine products. A detailed copy of Sale Terms, Conditions and Warranty information is available at request.
Jardine and Jardine Performance Products are registered trademarks of SuperTrapp Industries, Inc. and may not
be used without consent from SuperTrapp Industries, Inc. SuperTrapp Industries, Inc. retains all marketing rights to
its products and trademarks.
Jardine Performance Products is manufactured by SuperTrapp Industries, Inc. in Cleveland, OH. Our exhausts,
highway bars, backrests, fender kits & accessories for V-Twin, Metric, Sport & Dirt applications are made in the
U.S.A. Jardine has been manufacturing performance products since 1959.
E: Jardine@SuperTrapp.com
www.JardineProducts.com
TECH: (216) 265‐8400
REV: A 9‐12‐13 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising