fusible shunt trip
ENGINEERED SWITCHES
FUSIBLE SHUNT TRIP
DISCONNECT SWITCHES
Ferraz Shawmut’s Engineered Switches offer modular
industrial control panels featuring a fusible shunt trip
to allow for remote disconnection. An array of available options allows for maximum functionality to be
built into a single compact panel.
Panels built for elevator applications feature control
transformers (fusing both primary and secondary
sides), a fire safety interface relay with a fire alarm
voltage monitoring relay and mechanically interlocked
auxiliary contacts.
Use of Ferraz Shawmut’s Amp-Trap 2000® AJT
Class J fuses permits easy selectivity coordination,
while providing the panel and its components with
superior current limitation and the ability to withstand
high fault conditions. AJT fuses provide added system
reliability since no maintenance or periodic testing is
required as with other electromechanical overcurrent
devices.
HIGHLIGHTS:
➤ 3-Pole Fused Switch
➤ 120 VAC Shunt Trip
➤ Class J fuse block
(fuses not included)
➤ Ground Lug as per NEC
➤ Control Power brought
to terminals
➤ Modular components
➤ NEMA 1 Industrial
➤ Enclosure Standard
APPLICATIONS:
➤ Elevators
➤ Building emergency
systems
➤ Data processing rooms
➤ Miscellaneous fusible
shunt trip applications
FEATURES/BENEFITS:
➤ Fused switch – provides high current limitation and short circuit withstand
➤ Padlockable handle – allows panel to be locked with switch
in the off position ensuring load side power isolation during
servicing
➤ Shunt trip – allows for remote tripping of the main line power
prior to the application of water in elevator
➤ Sprinkler system applications
OPTIONAL FEATURES:
➤ Industrial Control circuit transformer
➤ Primary (208, 240, 480 or 600 VAC)
➤ Fire safety relay for control interface (3PDT Relay, choice of Coil Voltage: 120 VAC, 24 VDC or 24VAC)
➤ Oil-tight Key Switch to test 2 position selector switch.
➤ Oil-tight Power enabled power light (choice of colors:
Red, Green, White or Yellow)
➤ Isolated neutral lug – 100%. Oversized 200%
for excessive Non-Linear loads.
➤ Auxiliary and Alarm Contacts are both Form C contacts.
The Auxiliary contacts change state when the switch is
in the on position. Alarm contacts change state when the
switch is in the tripped position. The Alarm contact is
located in place of the second auxiliary contact.
➤ NEMA 12, 3R, 4 or 4X enclosure available.
Ratings
➤ 600 VAC: 30A, 60A,
➤ 100A, 200A &400A
➤ Withstand rating: 200kA I.R.
Approvals
➤ UL 1087 Molded-Case
Switch
➤ UL 50
➤ NEMA 1, 12, 3R, 4, 4x
➤ UL512
➤ UL/cUL Listed Control Panel
RECOMMENDED FUSE USAGE:
ES Series.......................................use with AJT, A4J, HSJ
K 53
Gross Automation (877) 268-3700 · www.ferrazshawmutsales.com · sales@grossautomation.com
K
ENGINEERED SWITCHES
FUSIBLE SHUNT TRIP An example of an Engineered Switch Catalog number
is listed below with the ordering process detail.
VOLTAGE
Fusible Shunt Trip Switch Maximum Horsepower Ratings based on Motor Load
ES2T20R1KRN2A2
Select fusible shunt trip switch:
Ampacity Rating
30
60
100
200
400
Catalog Number
ES3
ES6
ES1
ES2
ES4
1
2
3
4
5
6
7
Control Transformer
208VAC to 120VAC
240VAC to 120VAC
480VAC to 120VAC
600VAC to 120VAC
Fire Safety Relay 3PDT
with Voltage Monitoring
120VAC coil
24VDC coil
24VAC coil
Keyswitch
Key to test switch, 120V, with legend plate
Pilot light – power enabled
Red
Green
White
Yellow
Isolated Neutral Lug
30-60A (for 200% oversize use N1)
100A (for 200% oversize use N2)
200A (for 200% oversize use N4)
400A (for 200% oversize use two N4)
Mechanical Interlocked Auxiliary Contacts
1 Form C auxiliary contact
2 Form C auxiliary contacts
1 Form C auxiliary contacts
and 1 Form C auxiliary alarm contact
Enclosure options
NEMA 1 standard
NEMA 12
NEMA 3R
NEMA 4
NEMA 4X
FLA %
208 VAC 3
240 VAC 3
480 VAC 3
600 VAC 3
30 AMP
60 AMP
100 AMP
150 175 225 150 175 225 150 175 225
5
5 3
10 10 10 20 15 15
5
5 5
10 10 10 20 20 15
10 10 10 30 25 20 50 40 30
15 15 10 30 30 25 60 50 40
200 AMP
150 175 225
40 40 30
50 40 30
100 75 75
125 100 100
400 AMP
150 175 225
75 75 60
125 75 75
250 150 150
250 200 200
150...Light duty maximum allowable motor horsepower
based on Class J fuses
175...General duty maximum allowable motor horsepower
based on Class J fuses
225...Heavy duty maximum allowable motor horsepower
based on Class J fuses
Select options:
Option No. Description
DISCONNECT SWITCHES
Catalog No.
T20
T24
T48
T60
Horsepower values in the above table are intended for estimating
the size of the switch only. For light duty applications size switch
for a minimum of 1.5 times the motors full load amps. Medium
or General duty applications size for a minimum of 1.75 times the
full load amps of the motor. For Heavy Duty applications use a
maximum of 2.25 times the full load amps of the motor.
D
R1
R2
R3
O
W
K
R
G
W
Y
H
N6
N1
N2
N4
A
B
C
2
3
4
X
Fusible Shunt Trip Switch Dimensions and Optional Neutral Lug Sizes
VOLTAGE
208 VAC 3
240 VAC 3
480 VAC 3
600 VAC 3
Neutral Lug Size
30 AMP
H xWxD
24 x 20 x 8
24 x 20 x 8
24 x 20 x 8
24 x 20 x 8
350 - #6
60 AMP
H xWxD
24 x 20 x 8
24 x 20 x 8
24 x 20 x 8
24 x 20 x 8
350 - #6
100 AMP
H xWxD
24 x 20 x 8
24 x 20 x 8
24 x 20 x 8
24 x 20 x 8
350 - #6
200 AMP
H xWxD
30 x 24 x 8
30 x 24 x 8
30 x 24 x 8
30 x 24 x 8
500 - #4
Notes:
1. Options must be selected in above order for part number to be valid.
2. Elevator panels must include a control transformer, fire safety relay
with voltage monitoring and mechanical interlocked auxiliary contact.
3. Options 1, 2, and 6 are required. Options 3, 4, 5, and 7 are optional.
K 54
Gross Automation (877) 268-3700 · www.ferrazshawmutsales.com · sales@grossautomation.com
400 AMP
H xWxD
36 x 30 x 8
36 x 30 x 8
36 x 30 x 8
36 x 30 x 8
600 - #2
ENGINEERED SWITCHES
FUSIBLE SHUNT TRIP
DISCONNECT SWITCHES
FUSIBLE SHUNT TRIP SWITCH
120 VAC Fire Safety Control Interface
MAIN
DISCONNECT SHUNT
TRIP
FUSE
LINE
LOAD
FUSE
FUSE
TRIP
COIL
ISOLATED
NEUTRAL
LUG
PRIMARY AUXILIARY
CONTACT
GND
SECONDARY AUXILIARY
CONTACT OR ALARM
CONTACT (OPTIONAL)
FUSE
FUSE
OPTION 1
OPTION 6
OPTION 5
H1
H4
X1
X4
FUSE
GND
OPTION 3
OPTION 2
FIRE ALARM
MONITOR RELAY
THIS CONTACT IS FROM A FIRE DETECTING
DEVICE LOCATED IN THE FIELD
FIRE SAFETY
RELAY
FIRE
DETECTOR
FIRE SAFETY
RELAY
CR
AUTO
POWER ON
OPTION 4
OPTION 3
TEST
FUSIBLE SHUNT TRIP SWITCH
24 VDC Fire Safety Control Interface
MAIN
DISCONNECT
SHUNT
TRIP
FUSE
LINE
FUSE
LOAD
FUSE
OPTION 6
OPTION 5
OPTION 1
PRIMARY AUXILIARY
CONTACT
(OPTIONAL)
GND
SECONDARY AUXILIARY
CONTACT OR ALARM
CONTACT (OPTIONAL)
FUSE
COIL
FUSE
TRIP
ISOLATED
NEUTRAL
LUG
H1
H4
X1
X4
K
FUSE
GND
OPTION 2
FIRE ALARM
MONITOR RELAY
THIS CONTACT IS FROM A FIRE
DETECTING DEVICE LOCATED IN THE FIELD
FIRE SAFETY
RELAY
FIRE
DETECTOR
FIRE SAFETY
RELAY
CR
AUTO
OPTION 4
OPTION 3
TEST
POWER ON
K 55
Gross Automation (877) 268-3700 · www.ferrazshawmutsales.com · sales@grossautomation.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising