XPP-5422B
PRODUCT DATA
XPP-5422B
Intrinsically Safe Permissible Dual-Light
MARKET APPLICATIONS
DESCRIPTION
Hazardous work environments, industrial, automotive, law enforcement, fire & rescue
CASE MATERIAL
DIMENSIONS
Engineered Polymer - Black
WEIGHT
LENS
Weight: 6.9 oz. (196 g) with batteries installed
LIGHT SOURCE
LIGHT OUTPUT
ON/OFF
RUN-TIME
BATTERY
FEATURES
Flashlight: CREE® LED Impervious to shock with a 50,000 hour lifetime
WARRANTY
Limited Lifetime Warranty • Lifetime on LEDs,
housing, lens, electronics and switches.
Batteries, normal wear and abuse are excluded.
This non-rechargeable dual-light is cETLus, ATEX, IECEx and MSHA listed Intrinsically Safe Permissible for use in both
above and below ground hazardous locations where explosive gases and dusts may be present. It uses as CREE®
LED rated at 120 lumens that works in conjunction with a high-efficiency deep parabolic reflector to create a usable
flashlight beam rated at 170 meters. A 120 lumens unfocused floodlight is integrated into the housing which is perfect
for close-up illumination. Additionally both the flashlight and the floodlight can be turned on at the same time for
maximum versatility and safety. The dual body switches provide momentary or constant-on functionality for the
flashlight and on/off functionality for the floodlight. Power comes from 3 AA premium batteries (not included).
Length: 7.0 inches (178 mm) • Head Diameter: 1.8 inches (46 mm) • Handle Diameter: 1.0 x 1.5 inches (25 x 38 mm)
Unbreakable polycarbonate with scratch resistant coating
Flashlight: 120 lumens, Floodlight: 120 lumens, Dual-Light: 240 lumens
Dual Body Switch - Momentary or Constant-on Flashlight, Constant-on Floodlight
Flashlight: 17.5 hours, Floodlight: 17.5 hours, Dual-Light: 4.5 hours
3 Alkaline AA batteries (not included)
• cETLus, ATEX, IECEx and MSHA listed Intrinsically Safe
Permissible for use in both above and below ground hazardous
locations where explosive gases and dusts may be present
• Flashlight – Floodlight – Dual-light
• CREE® LED technology – 50,000 + hours LED life
• Momentary or constant-on flashlight
• Sharp focused flashlight beam for distance illumination
• Unfocused wide-beam floodlight for close-up illumination
• Dual-light (flashlight & floodlight at same time) for maximum
versatility
• Engineered polymer housing
• Non-slip grip
• Dual body switches
• Waterproof
• Impact & chemical resistant
• Built-in pocket/belt clip & removable lanyard
Permissible Nightstick 5422 Flashlight/Floodlight
• Requires 3 AA batteries
APPROVALS
170m
120
17h 30min
CLASS I DIV 1 GRPS A-D T3
CLASS II & III DIV 1 GRPS E-G T135C
CLASS I ZONE 0 AEx ia IIC T3 Ga
CLASS I ZONE 0 Ex ia IIC T3 Ga
ID 4003544
I M 1 Ex ia I Ma
INTRINSICALLY SAFE
II 1 G Ex ia IIC T3 Ga
SECURITE INTRINSEQUE
Ex ia I Ma
Ex ia IIC T3 Ga
Intertek ITS 13 ATEX27837X
IECEx ETL 13.0026X
ž&”7DPE”ž&
1.5V/Cell AA Alkaline
0359
2m
7250cd
APPROVAL No. 20-A130001-0
TESTED FOR INTRINSIC SAFETY IN METHANE-AIR MIXTURES ONLY
WARNINGS: 1) MSHA approved for use with three AA Duracell Type PC1500, Energizer
Type EN91, and Energizer Type L91 batteries only.
2) Replace the batteries in fresh air only and replace all batteries at the
same time. Do not mix batteries from different manufacturers or of
different types.
3) Energizer Lithium (Type L91) batteries are to be replaced by a qualified
technician only.
4) The Model Nightstick 5422 must not be opened in areas where
permissibility is required.
1m
Designed in USA, manufactured in China at a ISO-9001 certified Bayco facility.
Conforms to:
ANSI/UL STD 913, ANSI/UL
60079-0, ANSI/UL 60079-11
ANSI/ISA 60079-26
Certified to:
CAN/CSA STD C22.2 No 157
CAN/CSA STD C22.2 No 60079-0
CAN/CSA STD C22.2 No 60079-11
CSA STD C22.2 No 25
PDS_XPP-5422B_141017_A
Bayco Products, Inc. • 640 S. Sanden Blvd • Wylie, TX 75098 • 800.233.2155 • www.baycoproducts.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising