DD4MR-FX - Optocore

DD4MR-FX - Optocore
DATA SHEET
Product Features
2 coaxial MADI inputs and
2 coaxial MADI outputs
Up to 128 input and
128 output MADI channels
Up to 128 input and
128 output SANE channels
2 x 100 Mbit Ethernet ports
Four RS485 interfaces for
the exchange of control
data. (e.g. RS422, RS485,
DMX, MIDI)
Word clock in- and output
Composite video in- and
output
2 optical 2 Gbps LINK
interface with duplex LCconnectors
Dual power supply with
automatic switchover
USB , RS232 or LAN port
for configuration and
control
Full remote access with
OPTOCORE CONTROL
software
Upgradeable internal logic
Comprehensive status
control via LED banks on
the front
Revision 2.0 / October 2015
DD4MR-FX
OPTICAL DIGITAL
DUAL MADI / SANE / VIDEO /
DATA MODULE WITH ETHERNET
NETWORK DEVICE
The DD4MR-FX is a digital I/O unit
and interface for the OPTICAL
OPTOCORE and CAT5 SANE
DIGITAL NETWORK SYSTEM. The
unit provides two MADI input and two
MADI output ports, allowing the
transmission of up to 128 input and
128 output digital audio channels.
Each MADI port can be adjusted to
handle different formats according to
the AES standards. The DD4MR-FX is
equipped
with
coaxial
MADI
interfaces. It is perfectly suitable for
DiGiCo and AVID digital consoles.
The DD4MR-FX is equipped with two
SANE ports, which enables to send
and receive up to 256 audio channels
via standard CAT5 cable. SANE ports
can be used to send Ethernet data as
well. DD4MR-FX is equipped also with
two separate LAN ports for Ethernet
transmission. DD4MR-FX unit can be
used as a bridge between fiber
Optocore network and CAT5 SANE.
The DD4MR-FX is the perfect I/O unit
for a wide range of professional audio
devices with MADI inputs and outputs
such as digital consoles and I/O
systems. The huge amount of
channels exchanged by one DD4MRFX makes it the ideal and most cost
effective interface for digital console
systems. In addition, the user can
define the number of input channels
received at each MADI port and
allocated on the fiber for transmission.
This keeps the system highly flexible
in all sorts of temporary
and
permanent applications, especially
when long distance connections and
high- quality audio are required.
www.optocore.com
Redundant fiber connections can be
established using the two provided
optical LINK-interfaces. Depending on
the fiber optic transceivers, distances
from 700 m up to 70 km can be
covered. The dual redundant ring
structure provides maximum safety in
a network with an outstanding low
latency.
The DD4MR-FX is equipped with a
word clock input and output. It
includes a composite video input and
output. Four RS485 ports allow the
transport of a wide range of standards
such as RS422, DMX and MIDI. In
addition to the audio signals, video
and data signals are transmitted by
the fiber connection. The dual power
supply unit, with automatic switchover,
permits a redundant power supply and
safeguards against malfunctions of the
unit if one power supply fails to run.
OPTOCORE CONTROL provides
easy access to all configuration and
control tools, including routing,
naming, storage and recall of
configurations on the computer, offand online mode with real-time level
display.
Due to SMD production, the DD4MRFX fulfills the demand of highest digital
standards.
The
FPGA
(field
programmable gate array) based
concept of the internal logic circuitry
permits updating of the hardware,
ensuring a continual state-of-the-art
device.
inquiry@optocore.com
Line Drawings
Technical Specifications
MADI Ports
Inputs
Outputs
Data rate
Impedance
SANE, LAN ports
Audio
LAN
Auxiliary Ports
Data channels
Data rate
Impedance
Convention AES10-1991 / AES10-2003
Number / Connectors
MADI digital audio channels
Number / Connectors
MADI digital audio channels
Termination
Convention
TIA - 568A/B, Optocore
TIA - 568A/B, IEEE - 802.3
Convention EIA / TIA-485
Digital control data
Word clock
Termination
Source
Hardware standard 75 Ω / BNC
Data rate
Depending on used sample rate
Impedance
Output
Input
Hardware standard 75 Ω / BNC
Video
Channels
Format
2 / coaxial
56 or 64 per Input
2 / coaxial
56 or 64 per Output
125 Mbps
75 Ω
200 Mbit/s
10/100 Mbit/s
4
Up to 10 Mbps
330 Ω
≤ 10 Ω
44,1 / 48 / 88,2 / 96 / 176,4 /
192 kHz
75 Ω
1k / 75 Ω software switch
1 x input, 1 x output
Composite video
Optical Link
Input, Output, Dual – Full bandwidth
Connection
Protocol
Transmission
Data rate
Optical wave guide cable lengths
Duplex LC
Optocore
Full duplex
2 x 2 Gbps
Multimode fiber 50 µm
≤ 700 m
Monomode fiber 9 µm
≤ 70 km (on request)
2 independent power supplies with function check and automatic switch-over
Switch-mode, universal input
100...240VAC, 50/60Hz, 10VA-typ
50 ... 60 Hz
Power supply
Type
Mains voltage
Frequency
Remote Control
RS232
USB Port
Convention EIA / TIA-232
Dimensions
WxHxD
Weight
Revision 2.0 / October 2015
483 x 44 x 200 mm
2.7 kg
www.optocore.com
R x D, T x D / 57 600 Baud
Interface to PC
1 RU / 19”
19.2 x 1.73 x 7.87 inch
6.0 lbs
inquiry@optocore.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising