Instructions For the Fastime 7 Stopwatch
Instructions For the Fastime 7 Stopwatch: 100 lap memory, Speed
conversion, stroke rate, time of day/date,alarm, pacer,
countdown/up/repeating timer
A
B
C
Stopwatch Event Timing:
Press C – Start,C – Stop (time Out).C – Continue
C – Stop A - Reset
Split Timing:
Top display shows cumulative time to last split.
Middle display shows previous split lap time. Bottom
display shows the cumulative running time
Press C –Start,
A – Splits,
C – Stop. A - Reset
Memory Recall: Press B anytime to recall memory.
1st display shows fastest lap number and time. Press B again for slowest lap details
Press B each split time to show split times starting from the last split. Each display
shows the split number, the lap time and cumulative time.
Press B to return to current running time
Press MODE button to move to Speed display:
To set enter the distance to be timed, Press and hold B until digits flash. Press A to
choose digits to change. Press C to change the digits. Press B to exit setting.
Press C to start the stopwatch
Press A to capture split times
Press C to stop
Press A to reset
Press B for memory recall
The top display shows the speed per split time
The middle display shows the lap split time
The bottom display shows the cumulative running time
N.B. When speed mode has a distance value, then speed mode replaces stopwatch
mode. Memory recall also includes average speed and lap speeds
Press MODE button to move to Stroke rate display:
Press A The values on the display will decrease
After 3 Strokes/frequencies have been observed Press A again
The display will show the expected number of times that action will occur during one
minute.
Press MODE button to move to Time of Day/date display:
To set time of day and date, Press and hold B until digits flash. Press A to choose
digits to change. Press C to change the digits. Press B to exit setting
Press MODE button to move to Alarm/Time of Day display:
To set alarm time, Press and hold B until digits flash. Press A to choose digits to
change. Press C to change the digits. Press B to exit setting
Press MODE button to move to Pacer display:
Press A to set the pacer (from 5 to 240 per minute). Press C to start/stop the pacer
Press MODE button to move to Countdown/up Timer (9hr 59m 59sec) display:
Two options are available:
Countdown then count up and repeating countdown.
To choose a timer mode press and hold A until the arrows next to the timer icon (at the
bottom left of the display) changes. A down arrow means the setting is for a repeating
countdown timer. A down/up arrow means the setting is for a countdown/up timer.
To set timer, Press and hold B until digits flash. Press A to choose digits to change.
Press C to change the digits. Press B to exit setting.
To start/stop the timer press C
Depending on the timer chosen the timer counts down to zero then counts up until
stopped. Or counts down to zero and repeats.
AST Limted.
+44(0)1530 411321.
E.mail: admin@astopwatch.co.uk
www.astopwatch.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising