Brakes - Sachse Rod Shop

Brakes - Sachse Rod Shop
Index For “Brakes” Section
Click on page numbers to the right of the description to jump you to that specific page.
Symbols
11” Rotor Brake Kits..............................31
B
Master
Cylinder
Access Doors......................................35
Adapters..............................................33
Fill Bottle............................................35
Mounts..........................................32, 33
Remote Fill Kit...................................35
Cylinders................................................34
Mustang II
5-Lug Rotors..........................................31
11” Rotor Brake Kits..............................31
Boots.........................................................38
Braided Flex Line Kits...........................37
Brake
Backing Plate T-Bolts.............................35
Booster.............................................32, 34
Boots......................................................38
Cables...............................................37, 38
Hose Kits................................................37 O
Line Tabs & Clips..................................37 Offset Booster Bracket...........................32
Master Cylinder Fill Bottle....................35
Master Cylinders....................................34 P
Pedal
Assembly......................................32, 33 Power Brake
Booster..........................................32, 34
Push-Rod Kit.......................................35
Pedal Assemblies................................33
Trim Plates..........................................33
Vacuum Pump.....................................34
Pressure Gauge Test Kit.........................33
Proportioning
Valves..............................36
Proportioning Valves..............................36
Residual Valves......................................36
D
R
Rear Disc Brake Kits..............................31
Disc Brake Kits..................................30, 31 Remote Fill Kit for
Master Cylinder................................35
Dropped Spindle
Residual
Valves........................................36
Disc Brake Kits 30
E
T
T-Bolts
Emergency Brake
Brake Backing Plate...............................35
Boots...................................................38
Through
Frame Fittings.........................36
Cables............................................37, 38
Trans-Mount
Hand Brake......................38
Caliper Clevis......................................38
Warning Switch...................................38
U
Hand Brake............................................38
Under Dash
F
Emergency Brake...................................37
Flex Line Kits..........................................37
V
Floor Trim Plates.....................................33
Floor-Mount Hand Brake......................38 Vacuum Pump
Foot Brake...............................................37
Power Brakes......................................34
Frame Fittings.........................................36
Front Brake Kits...............................30, 31
G
Gauges......................................................33
H
Hand Brake.............................................38
M
Manual Brake Pedal Assemblies.....32, 33
b
Web: www.SachseRodShop.com
Order Toll Free: 1-800-495-3904
r Tech. & Info. Line: 1-972-495-1557
Email: sales@SachseRodShop.com
a
k Dropped Spindle Disc Brake Kits
More Applications Available, Call or E-mail for More Information
e
All kits complete with caliper brackets, loaded calipers, rotors,
s
bearings, hardware and instructions. Listed kits have smooth
surface rotors. Listed information is approximate, call or e-mail prior to
© CPP
ordering kit to get confirmed measurements. Your wheel may not clear even
if it is the diameter listed as not all wheel construction is the same and in
some cases the factory drum brake wheels may not clear.
Rotor Dia.
Width Change² Min. Wheel
Full Size ‘55-’57................ 12”......................+5/8”......................15”................CPP 5557SWBK-D12..... $409.95
Full Size ‘58-’64................ 12”......................+3/8”......................15”................CPP 5864SWBK-D12..... $439.95
Camaro ‘67-‘69................ 12”......................... 0..........................16”............... CPP 6769SWBK-D12¹.... $409.95
Nova ‘68-‘74................ 12”......................... 0..........................16”............... CPP 6769SWBK-D12¹.... $409.95
Chevelle ‘64-‘72................ 12”......................+5/8”......................15”................CPP 6472SWBK-D12..... $439.95
Cross-Drilled & Slotted Rotor Upgrade (Pair)............................................................................................. $99.95
¹ Maximum Wheel Backspacing 4-3/8” / ² Track Width Change is Per Side
Stock Height Spindle Standard Front Disc Brake Kits
Many More Applications Available, Call or E-mail for More Information
Perfect choice if you simply want to install
disc brakes on your car. Includes everything to
convert to disc brakes including cast iron calipers vented rotors
(available with optional Turbo-Slotting and Xtra-Life plating),
pads, caliper brackets, splash shields, rubber flex hoses, lines,
master cylinder, booster (power kit only), proportioning valve,
bearings, seals, necessary hardware and instructions. Available for several GM, Ford & Mopar applications.
Full Size ‘55-’58...Power - Bolts to Stock Drum Spindle..............................................SSB A129.......... $729.95
Camaro ‘67-’69...Power - Includes Spindles.............................................................. SSB A123-1......... $849.95
Nova ‘68-’74...Non-Power - Drum to Disc; Includes Spindles................................SSB A123.......... $684.95
Galaxie ‘57-’66...Non-Power - Fits Stk Drum Spndl; Not Fit Fact Sway Bar.............SSB A152.......... $999.95
Mustang ‘64-‘66...Non-Power - Bolts to V8 Drum Spindle........................................ SSB A120D......... $999.95
Cuda ‘70-’72...Power - Fits Stk Drum Spndl; O.E. Non-Power Cars Only........... SSB A156-1....... $1179.95
‘37-’48 Ford Spindle Basic Disc Brake Kit
11” X 1” vented rotors, quality re-man ‘78 & later GM calipers
with pads, caliper brackets, inner bearing & seal adapter, bearings, seals, dust caps,
hardware and instructions. Available with dust shield, call for more information.
5 On 4-1/2” Bolt Circle (Ford Pattern)......................... SUP 3221-K........ $394.95
5 On 4-3/4” Bolt Circle (Chevy Pattern)...................... SUP 3222-K........ $394.95
So-Cal Front Brake Kits - Fits ‘37-’41 Ford (Round Backed) Spindles Only
showing no casting flaws.
Page 30
Thirty
The classic look of late ‘50’s Buick finned drum with modern disc
brake functionality. The So-Cal front brake system uses a Wilwood
4 piston aluminum caliper with an 11” rotor mounted to an aluminum hub that will
accept 5 on 4-1/2”, 4-3/4” and 5-1/2” bolt circle wheels. Die cast aluminum alloy
drum covers with backing plate constructed of pre-polished deep drawn stamped
stainless steel. Air inlet scoops are heat treated investment cast stainless steel, again
Polished.............$1995.00 Unpolished........$1795.00
3904 Miles Rd. / Sachse, TX. 75048
b
Order Toll Free: 1-800-495-3904
Tech. & Info. Line: 1-972-495-1557 r
a
Ford Rearend Disc Brake Kits (Universal) k
Check Axle End Flange Diagrams Before Ordering - All Must Have Axle Offset Measurement of 2-1/2” e
s
Web: www.SachseRodShop.com
Email: sales@SachseRodShop.com
Small Bearing
Big Bearing (Old)
Big Bearing (New)
Axle Offset
Kits includes single-piston cast iron calipers with
a built in parking brake, rotors, pads, caliper
mounting brackets, splash shields, lines, bearings, seals and necessary
hardware. Rotors are available with optional Turbo-Slotting and Xtra-Life plating, call for more information.
All 8” & 9” With Small Bearing.....................................................................................SSB A111-2......... $579.95
All 9” With Big Bearing (Old Style)...............................................................................SSB A110-2......... $579.95
All 9” With Big Bearing (New Style - Torino)...............................................................SSB A111-3......... $579.95
GM Rearend Disc Brake Kits
Many More Applications Available, Call or E-mail for More Information
After you’ve installed disc brakes on the front of your car, it’s time to do the same in the
rear. Adding rear disc brakes can greatly improve overall braking ability. These kits include
everything you need to convert to more efficient disc brakes: Single-piston cast iron calipers
with a built in parking brake, rotors, pads, caliper mounting brackets, splash shields, lines,
bearings, seals and necessary hardware. Rotors are available with optional
Turbo slotting and Xtra Life plating.
Bel Air ‘55-’68...For Both C-clip & Non C-clip Axles.............................................. SSB A125-2........ $579.95
Camaro ‘67...10&12 Bolt; Non-Staggered Shock; C-clip Axles.......................... SSB A125-1........ $579.95
Camaro ‘68-’81...10&12 Bolt; Staggered Shock; C-clip Axles.................................... SSB A125.......... $579.95
Nova ‘62-’79...10&12 Bolt; Non-Staggered Shock; C-clip/Non C-clip................. SSB A125-3........ $579.95
Chevelle ‘64-’77...10&12 Bolt; Non-Staggered Shock; C-clip/Non C-clip................. SSB A125-3........ $579.95
Bolt-On Conversion - No Machining Required
Mustang-II 11” Brake Kits
Larger diameter rotor gives better braking than the stock diameter 9-1/4”
rotors. Complete kits come with NEW rotors (Ford or Chevy bolt pattern),
premium quality re-manufactured calipers with high quality pads, bolt-on
caliper mounting brackets, bearings, seals and instructions.
5 on 4-1/2” Bolt Circle (Ford Pattern).................... SSB A148-1........$344.95
5 on 4-3/4” Bolt Circle (Chevy Pattern)................... SSB A148..........$344.95
Stock 9-1/4” Diameter Mustang-II 5 Lug Rotors
NEW rotors are direct replacement with the exception that these are available with either 5 on 4-3/4” bolt circle
(Chevy pattern) or with 5 on 4-1/2” bolt circle (Ford pattern). Rotors come complete with races
and studs installed. Bearing & seal kit services both sides.
5 on 4-1/2” Bolt Circle (Ford Pattern)................. 1/2” Studs.................INT 4048F........ $95.95pr.
5 on 4-3/4” Bolt Circle (Chevy Pattern)............. 7/16” Studs............... INT 4048C....... $95.95pr.
Bearing & Seal Kit (Complete - Fits Either Above)...............................INT 4049.........$17.95set
Fax Number: 972-495-0057
Thirty
PageOne
31
b
Web: www.SachseRodShop.com
Order Toll Free: 1-800-495-3904
r Tech. & Info. Line: 1-972-495-1557
Email: sales@SachseRodShop.com
a
Power Brake Booster Kits
k
Specify 4 Wheel Drum, 2 Wheel Disc or 4 Wheel Disc Brakes When Ordering
e
s
© CPP
Complete firewall booster kits with dual master cylinder and proportioning valve
(unless used with 4 wheel drum brakes.) Easy to install and comes complete with
all necessary hardware. Most kits come standard with 9” diameter booster but
can be changed to 7” or 8” with single or dual diaphragms or increased to 11”.
Listed applications are plain finish, chrome upgrades are listed below.
Chevy Car
Full Size ‘55-’57...............CPP 5557BB........$299.95 Chevy Truck (Continued)
Full Size ‘58-’64...............CPP 5864BB........$299.95 ‘60-’62.............................. CPP 6062BB².......$299.95
Full Size ‘65-’70...............CPP 6570BB........$299.95 ‘63-’66...............................CPP 6366BB........$299.95
Camaro ‘67-’69.................CPP 6774BB........$299.95 ‘67-‘72.............................. CPP 6772BB³.......$299.95
Camaro ‘70-’79.................CPP 7079BB........$299.95 Ford Car
Nova ‘62-’67.....................CPP 6267BB........$299.95 ‘57-‘72 Full Size...............CPP 5772BB........$329.95
Nova ‘68-’74.....................CPP 6774BB........$299.95 ‘64-‘66 Mustang............. CPP 6468B-MC.....$299.95
Chevelle/Camino ‘64-’66....CPP 6474BB........$299.95 Ford Truck
Chevelle/Camino ‘67-’72....CPP 6772BB........$299.95 ‘53-‘56............................. CPP 5356FBB¹......$399.95
Chevelle/Camino ‘73-’77.CPP 7377B-MC......$299.95 ‘57-’60...............................CPP 5760BB........$299.95
‘61-’64...............................CPP 6164BB........$299.95
Chevy Truck
‘47-‘53.............................CPP 4753FBB¹......$399.95 Mopar
‘55-‘59.............................CPP 5559FBB¹......$399.95 ‘63-‘74...............................CPP 6374BB........$299.95
¹ Firewall Mount, Includes Pedal / ² Automatic Transmission Only (Call for Manual Trans) / ³ OEM Style Booster
Chrome Power Brake Booster Kit Upgrades
Upgrade your power brake booster assembly purchase with these chrome options.
Chrome Master Cylinder & Cap............................................................................ CPP Chrome-MC... +$100.00
Chrome Proportioning Valve, Bracket & Short Lines............................................CPP Chrome-PV...... +$75.00
Chrome Brake Booster & Mounting Bracket.........................................................CPP Chrome-BB.... +$120.00
Offset Booster Kit & Bracket (55-64 Chevy)
Specify 4 Wheel Drum, 2 Wheel Disc or 4 Wheel Disc Brakes When Ordering
Kit moves the booster over 2” and up 1”. Offsetting the booster provides extra room
for big block installations and added clearance for valve covers. Complete kit includes
specially valved booster, dual master cylinder, bracket and hardware.
Offset Booster Bracket With Linkage Only.........................CPP 5564BB-O...... $149.95
Complete With Booster, M/C Prop Valve (Like Above).....CPP 5561BB-OE..... $349.95
Universal Through Firewall Swing Brake Pedal Assembly
Universal swing pedal assembly has correct pedal ratios already drilled in the swing arm for either
manual or power brake systems. Firewall plate also pre-drilled for both 4-bolt universal brake
booster and 2-bolt master cylinder mounting. Clevis included with 3/8”-24 thread to thread directly
onto the input push-rod of most power brake boosters. Manual brake will require push-rod to
connect directly to the master cylinder. Assembly comes complete with an adjustable angle brake
pad mount that can be reversed on either side of the swing arm and accepts 1/2”-20 brake pad along
with an adjustable push button brake light switch assembly. Measures 17” tall from top of switch
to bottom of pedal arm X 6” deep (bracket at top) X 5” wide (bracket)
Through Firewall Swing Brake Pedal Assembly........................................ KUG 701.......... $269.95
Page 32
Thirty
Number
Two
3904 Miles Rd. / Sachse, TX. 75048
b
Order Toll Free: 1-800-495-3904
Tech. & Info. Line: 1-972-495-1557 r
a
Power Brake Pedal Assemblies - Ford & Chevy Chassis
k
Complete assemblies include new dual M/C and new 7” booster (dual diaphragm
e
booster available). Model A and ‘32 mount weld to the inside of boxed frame and
s
can be used as “universal” assemblies for unique applications. These assemblies are
manufactured for stock chassis and in most applications will require modification
Ford
or changing of stock
‘28-’31................................SRS PB601.........$219.95 t r a n s m i s s i o n c r o s s ‘32...................................SRS PB602.........$219.95 member. Call for info.
‘33-’34................................SRS PB603.........$219.95 Chevrolet
‘35-’40 Car.........................SRS PB604.........$239.95 ‘37-’39 Car.........................SRS PB622.........$229.95
‘35-’41 Pickup...................SRS PB604.........$239.95 ‘40-’48 Car.........................SRS PB623.........$229.95
‘42-’48 Car.........................SRS PB606.........$239.95 ‘49-’54 Car.........................SRS PB624.........$309.95
‘48-’52 Pickup...................SRS PB612.........$309.95 ‘47-’54 Trk (&GMC).........SRS PB632.........$309.95
‘53-’56 Pickup...................SRS PB613.........$309.95 ‘55-’59 Trk (&GMC).........SRS PB633.........$309.95
Web: www.SachseRodShop.com
Email: sales@SachseRodShop.com
Manual Brake Pedal Assemblies
Listed Ford Chassis - Master Cylinder Not Included
28’-31’ Mount Can Be Used As Universal
Pedal arm features self-lubricating Teflon bushing and 1/2”-20 thread for brake pad
installation. Master cylinder plunger is adjustable with threaded rod end/push rod. 28’32’ units weld to boxed frame rail, 33’-48’ assemblies bolt to stock X-member with slight
modification. All assemblies use master cylinders with 3-3/16” bolt hole centers.
‘28-’31.............................. TCI 601-6504-00..... $119.95 ‘35-’40 Car....................... TCI 604-6504-00.....$169.95
‘32................................. TCI 602-6504-00.....$146.95 ‘35-’41 Pickup................. TCI 604-6504-00.....$169.95
‘33-’34.............................. TCI 603-6504-00.....$169.95 ‘42-’48 Car....................... TCI 606-6504-00.....$169.95
‘39-’48 Ford Master Cylinder Adapters For Original Brake Pedals
Adapters to install 2-bolt master cylinder to the early Ford three bolt mounts.
‘41-’48 Kit spaces pedal assembly over to clear GM turbo 350 transmission.
‘39-’40 Ford Master Cylinder Adapter........................................... CHA AS-2021........ $49.95
‘41-’48 Ford Master Cylinder Adapter........................................... CHA AS-2022........ $66.95
Brake Pedal Trim Plate Kit
Most under-floor brake pedals have an ear welded on the arm for a brake pad and to put the
pedal through the floor requires an odd shaped hole to allow this ear
through but after it’s through you only need a slot for the actual pedal
arm. This metal plate kit features a stepped plate so when they are put
together it fits snug to the floor for easy sealing with seem sealer. Slot
length is adjustable by mounting plates with the necessary amount of
opening before securing to the floor..............SRS 6510.............$11.95
Brake Pressure Gauge Test Kit
With a pressure gauge you can see your actual hydraulic pressure at
the wheel to diagnose brake problems and eliminate a lot of guesswork. Gauges installs
in the following supplied bleeder adapters 5/16”-24, 3/8”-24, M7x1.00, M8x1.25,
M10x1.00 and M10x1.50. For shop testing only, not to be left installed on the vehicle.
Brake Pressure Gauge Test Kit............................................ SSB A1704............$45.95
Fax Number: 972-495-0057
Thirty
Page
Three
33
b
Web: www.SachseRodShop.com
Order Toll Free: 1-800-495-3904
r Tech. & Info. Line: 1-972-495-1557
Email: sales@SachseRodShop.com
a
k Manual or Power Brake Master Cylinder
All new dual reservoir master cylinder with 1” bore and features brake line
e
outlets on both left and right side. Port plugs are included for whichever
s
side is not used. Piston is machined with deep recess for manual brake
pedal push rod and an adapter is included to install in this piston recess
for use with power boosters. Mounting holes are slotted for universal
mounting to most manufactures brake pedal assemblies.
Universal Master Cylinder (Plain)............................................................................... CPP M-C100-S........ $54.95
Chrome Smooth Bodied Master Cylinder
Chrome master cylinder that’s not a warmed over OEM looking piece that won’t break
the bank! Master cylinder is an all new aluminum casting and features line exits on
both sides for 3/16” line without need of adapters. 1” piston features deep recess for
non-power installations and includes an insert to allow installation with power booster.
1-1/8” bore units available. Please note that this is a lower cost, cast aluminum unit what
will have minor flaws in the pre-chrome preparation polishing and final chrome finish. A
perfectly flat surface and flawless chrome finish is not possible over an aluminum casting.
Chrome Smooth Bodied Master Cylinder.................................................................CPP M-C100-SAC.... $129.95
Chrome Brake Boosters
Universal “Street Rod” Applications
New brake boosters available in several diameters with single and dual diaphragms. All boosters have 3-3/8”
square mounting pattern and 3-7/16” stud spacing for installation of master
cylinder. Black plastic 90 degree check valve & grommet included. Inlet
push-rod has male 3/8”-24 thread.
Single Diaphragm Dual Diaphragm
7” Diameter.........CPP 7SRB-C..........$119.95.... CPP 7DSRB-C.......$159.95
8” Diameter.........CPP 8SRB-C..........$159.95.... CPP 8DSRB-C.......$189.95
9” Diameter.........CPP 9SRB-C..........$159.95...............Not Available
Plain Brake Boosters
Universal “Street Rod” Applications
All new boosters come with check valve and nuts & lock washers for master
cylinder and mounting studs. Push-rod has 3/8”-24 male thread. Master cylinder
stud centers are 3-3/8”. Four mounting studs on 3-3/8” centers square pattern.
7” Diameter...................Single Diaphragm.....................SRS 8110............ $99.95
7” Diameter....................Dual Diaphragm......................SRS 8115.......... $119.95
8” Diameter....................Dual Diaphragm......................SRS 8120.......... $139.95
Power Brake Electric Vacuum Pump Kit
Electric vacuum pump connects to the brake booster directly and is
completely stand alone as it does not connect to the engine at all.
Vacuum switch included so the pump only runs when needed. Complete
with switch, relay hose, hardware and instructions.
Power Brake Electric Vacuum Pump Kit...... SSB 28146......... $274.95
Page 34
Thirty
Four
3904 Miles Rd. / Sachse, TX. 75048
b
Order Toll Free: 1-800-495-3904
Tech. & Info. Line: 1-972-495-1557 r
a
3-1/
Master Cylinder Access Door
2”
k
For Master Cylinders Under Floorboard
e
s
Stainless access door features coin-slot rotary latch.
Master Cylinder Access Door................................................. ROC 149-3025-LA.......$48.95
6-1
/2”
8”
Web: www.SachseRodShop.com
Email: sales@SachseRodShop.com
5”
Master Cylinder Fill Bottle
Perfect for filling under floor master cylinders on cars without access doors. Plastic fill bottle has
siphon tube and angled nozzle so you can hold bottle vertical and squeeze to dispense brake fluid
into master cylinder without splashing onto bottom of floorboard or frame.
Master Cylinder Fill Bottle........................................................................CPP BFB............... $7.95
Remote Fill Retrofit For “Corvette” Master Cylinders
Includes aluminum M/C cap with fittings, gasket, hose, clamps and
billet dual reservoir. Reservoir measures 3-1/4” tall X 3-1/4” wide X
1-3/4” deep and features ports in the floor or back for line installation.
M/C cover fits Corvette and most dual reservoir master cylinders with
equal fluid chambers and cap measuring 3-1/4” X 6” and retains with
two wire bails.
Remote Fill Retrofit Kit..................................KUG 421...........$209.95
Universal Brake Pedal Push-Rod Kit
When mixing and matching different components sometimes
you just need a good selection of common push-rod hardware
to get the linkage setup the way you want it. Kit accommodates eyelet, clevis and
bell crank style push-rod setups and includes adapters for 10 common push-rod
configurations. Works with both power and non-power brake systems.
Universal Brake Pedal Push-Rod Kit............................ SSB A1726........... $53.95
Master Cylinder Plunger Rod / Female Heim End
Common for manual brake setups. Rod is 3/8” diameter x 4-1/4” long with a 3/8”-24 thread on one end and a
bullet nose on the other and can be shortened if needed. Heim has 3/8”-24
thread and hole for 3/8” diameter bolt, is lined and comes with jam nut.
Master Cylinder Plunger Rod............................................... WLD 20264............$6.95
Female Heim With Jam Nut.................................................... SRS 9125..............$9.95
Rear Brake Backing Plate Bolts
Bolts insert from the back of the rearend axle tube through and into the brake backing
plate. The head of the bolt rests against the axle tube so you can tighten the nut on
the wheel side without the bolt turning. Sold each.
3/8”-24 x 1-3/8”................................................................SRS T-BOLT-38..........$2.00
1/2”-20 x 1-1/2”................................................................SRS T-BOLT-12..........$2.00
Fax Number: 972-495-0057
Thirty
PageFive
35
b
Web: www.SachseRodShop.com
Order Toll Free: 1-800-495-3904
r Tech. & Info. Line: 1-972-495-1557
Email: sales@SachseRodShop.com
a
k Preset Brake Portioning Valve / Distribution Block
Preset valves have a set proportioning of pressure front vs rear and are
e
not adjustable. They also meter to apply pressure to the rear brakes
s
before the front brake and feature a brake warning light to detect a loss
in pressure (not brake light switch). Blocks for use with disc/drum will
have 10psi residual built in. All ports are inverted flair with these thread sizes:
From MC to front brake 7/16”-24, from MC to rear brake 1/2”-20, from block
to front brakes (2) 3/8”-24 & form block to rear brake 9/16”-18.
Valve Only....................Disc Front / DRUM Rear.........................CPP PV-2............ $49.95
Valve Only..................... Disc Front / DISC Rear..........................CPP PV-4............ $49.95
Valve W/Bracket & Lines (Small Port M/C)..........Disc Front / DRUM Rear........... CPP PVKS-2-316...... $74.95
Valve W/Bracket & Lines (Small Port M/C)........... Disc Front / DISC Rear............ CPP PVKS-4-316...... $74.95
Mounting Bracket & Lines Only (No Valve) Fits Above ‘PV’ Valves Only............CPP PVBLK-S-316..... $24.95
Adjustable Portioning Valve & Brake Light Switch Block
No Residual Installed / For Drum Brake Rear Must Install External 10lb Residual
Black anodized aluminum block features built
in adjustable proportioning valve with low pressure hydraulic
activated brake light switch all in one unit. All ports are 3/8”34 thread with invert flare cone ready for 3/16” double flair line
installation. Brass adapter fitting included to adapt from to 1/4”
line invert flair if needed. Block measures 4” X 1-3/4” X 1”.
Adjustable Stop / Prop Block Only........................................... CPP APV-DB......... $69.95
Stop / Prop Block W/Bracket & Lines (Small Port M/C).......................................... CPP APVKS-316.... $109.95
Adjustable Proportioning Valve
Universal - Fittings Included For 3/16” Brake Line
Proportioning valve regulates front to rear brake pressure. By placing the valve in-line to the rear
brakes more pressure is then applied to the front giving better breaking. Valve features the highest
pressure reduction available with 60% capable over the full pressure range. Hand knob for easy
fine tune adjustment and is manufactured with anticorrosive brass internals.
Black Anodized.......................................................... SSB A0707........... $49.95
Brake Residual Pressure Valves
Residual pressure valves hold a preset pressure from the valve to the brake. On cars with the master cylinder
lower than the brakes on the wheel holding a set pressure insures that the fluid doe’s not siphon
back into the master cylinder. With drum brakes the return springs on the brake shoes would
collapse the slave cylinder. With 10 psi residual pressure held, the shoes
are held close to the drums for instant braking on the first push of the pedal.
Disc Brakes........................ 2lb. Residual Valve............................. SSB A0764........... $20.95
Drum Brakes...................... 10lb. Residual Valve............................ SSB A0765........... $20.95
Thru-Frame Brake Fittings
303 Stainless thru-frame fittings are a nice, clean way to get the brake line from the
inboard side of the frame to the out side. All fittings have female 1/8” npt
thread on the inboard side and -3 AN male fitting on the outboard side.
2” Frame............................................................................... BLT 66210........... $30.95
2-3/8” Frame.......................................................................... BLT 66310........... $30.95
Page 36
Thirty
Six
3904 Miles Rd. / Sachse, TX. 75048
Web: www.SachseRodShop.com
Email: sales@SachseRodShop.com
b
Order Toll Free: 1-800-495-3904
Tech. & Info. Line: 1-972-495-1557 r
a
Rear Brake Hose - Single k
e
s
For applications when dropping brake line off
chassis to the rearend housing and running 3/16”
hardline on the housing out to each wheel. Hose
features 3/16” female invert flare at chassis end and built in T-block with two
3/16” female invert flare threads at the other with a hole for 5/16” bolt mounting. Hose measures 18”.
Rubber Rear Brake Hose..................................................................................................SRS 8002............ $31.95
Braided Flex Brake Hose Kits
Hose kits include two 16” -3AN braided flex hoses, two adapters for 3/16” hard-line
to -3AN, frame tabs, retainer clips and banjo bolt or caliper fitting depending on kit.
‘77 & Earlier GM Calipers.....................................................SRS 6607............ $57.95
‘78 & Later GM Calipers........................................................SRS 6608............ $57.95
Aluminum Caliper - 1/8 npt (shown)......................................SRS 6609............ $57.95
Mustang II Stock Calipers & Lincoln Versi Rear Disc...........SRS 6610............ $57.95
Ford & GM Drum Brake.........................................................SRS 6616............ $57.95
Removable Brake Line Tabs
These handy brake lines tabs can be bolted or riveted to your frame rather
than welded. 5/8” brake line hole to fit most line adapters and two 3/16”
mounting holes. Includes two tabs and two brake line retaining clips per package.
Removable Brake Line Tabs.................................................... SPE 910-31309......... $11.95
Brake Line Tabs & Clips
Steel tabs can be bolted or welded to frame. Tabs have 5/8” diameter hole for line adapters
or factory style rubber line. Kit includes three (3) tabs and clips.
Brake Line Tabs & Clips...............................................................P&J 1069.............. $9.95
Under Dash Foot Operated Emergency Brake
Fully adjustable brackets allow brake to be installed in as small as 9” space between
dash and firewall. Heat treated gears with gears and mechanism hidden for a cleaner
installation and features rubber stop for quiet pedal return action. Billet aluminum arm
has “windows” milled into it matching the Lokar line of throttle pedals. Aluminum
foot pad offered features ribbed rubber inserts.
Foot Operated Brake Assemblies
Satin Finish W/Rubber Inserts................................................................................. LKR EFB-9003...... $244.95
Black Anodized W/Rubber Inserts......................................................................... LKR X-EFB-9003.... $244.95
Chrome Finish W/Rubber Inserts............................................................................ LKR EFB-9007...... $311.95
Cable Kits A single “Connector Cable” installs from the Under Dash Brake to the transmission tunnel area where
a “Dual Cable Kit” joins and separates to each rear wheel. These cable kits are adjustable in length.
Braided Stainless
Black Housing
Foot Brake Connector Cable...............................LKR EC-8001HT....... $126.95... LKR EC-8001U........$86.95
Dual Cable Kit....................................................LKR EC-80FHT*....... $205.95... LKR EC-80FU*......$143.95
*Clevis kit required for Wilwood, Corvette and Ford Explorer brakes calipers. See e-brake clevis kits.
Fax Number: 972-495-0057
Thirty
Page
Seven
37
b
Web: www.SachseRodShop.com
Order Toll Free: 1-800-495-3904
r Tech. & Info. Line: 1-972-495-1557
Email: sales@SachseRodShop.com
a
Floor-Mount Emergency Hand Brakes
k
Hand brake measures only 11-1/2” end to end. Features heat treated
e
rachet cut gear and lock for strength and safety. Four point mounting
s
for floor mount or side mounting for personal applications. U-CutTo-Fit cable kits include fittings for installation into most brake backing plates.
Floor-Mount Hand Brake........... (Add “X-” For Black Finish - Same Price)............LKR EHB-7000F..... $126.95
Braided Stainless
Black Housing
Cable Kit.................................................................. LKR EC-80FHT*......$205.95...LKR EC-80FU*......$143.95
*Clevis kit required for Wilwood, Corvette and Ford Explorer brakes calipers. See E-Brake clevis kits below.
Floor-Mount Emergency Hand Brake Warning Switch
Fits Lokar Floor-Mount Hand Brake Only
Installs directly onto the Lokar floor mount hand brake (EHB-7000F) with
existing holes. You can wire this switch to light up a dash light or sound
a buzzer to alert you when the emergency brake is applied.
Floor Mount Brake Switch Kit.......................................... LKR EHB-7001........ $32.95
Trans-Mount Emergency Hand Brake
Must Be Used With Lokar “Standard” Or “Nostalgia” Shifter
Brake handles available in either 11” or 16” lengths. Trans-Mount hand brake
assembly bolts to the side of the Lokar shifter bracketry. U-Cut-To-Fit cable
kits include fittings for installation into most brake backing plates.
11” Brake....... (Add “X-” For Black Finish - Same Price)........ LKR EHB-7011...... $158.95
16” Brake....... (Add “X-” For Black Finish - Same Price)........ LKR EHB-7016...... $158.95
Braided Stainless
Black Housing
Cable Kits...............................LKR EC-80THT*......$205.95... LKR EC-80TU*......$143.95
*Clevis kit required for most rear disc brake calipers. See E-Brake clevis kits below.
Emergency Brake Boots
Black naugahyde with stainless trim ring and stainless flush mounting
screws. Two styles offered for either the “floor mount” or “trans mount”
hand brakes. Outside diameter of bezel measures 2-1/2” X 6-1/4”.
Trans-Mount Brake...............................................................LKR 70-EHBT........ $30.95
Floor-Mount Brake...............................................................LKR 70-EHBF......... $30.95
E-Brake Clevis & Cable Kits W/Clevis Included
Required For Wilwood, Corvette & Ford Explorer Brakes
Cable Kits Offered With Explorer Clevis Included
Clevis Kits Only - Installs on ends of Lokar e-brake cables kit to pull the
e-brake lever on these calipers.
Wilwood (E-Brake Is Separate Caliper On Disc) & ‘88 & Later Corvette................. LKR EC-80WC........ $25.95
Corvette ‘84-’87...........................................................................................................LKR EC-80CC........ $34.95
Ford Explorer & Wilwood With E-Brake Drum Style Inside Brake Rotor Hat.......... LKR EC-81FC*........ $34.95
* If you are in need of a Ford Explorer / Wilwood clevis kit (EC-81FC) and a dual cable listed previously, then
these below listed cable kits have the clevis included at no additional charge. Braided kits available.
EC-80FU Lokar Cable Kit With EC-81FC Clevis Included (Black Housing).........LKR EC-81FU....... $143.95
EC-80TU Lokar Cable Kit With EC-81FC Clevis Included (Black Housing).........LKR EC-81TU...... $143.95
Page 38
Thirty
Eight
3904 Miles Rd. / Sachse, TX. 75048
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising