DACT-5000 - Potter Electric Signal Company, LLC

DACT-5000 - Potter Electric Signal Company, LLC
DACT-5000
DIGITAL ALARM
COMMUNICATOR TRANSMITTER
•
•
•
•
•
SIA or Contact ID reporting formats
Bi-Colored telephone line status LED's
User set daily test
Simplistic Programming with CFG-5000
Directly mounts in fire alarm cabinet
Description
The DACT-5000 Digital Alarm Communicator Transmitter allows the
PFC-5000 series fire alarm control panel to call a Central Station and
report a local Fire Alarm, Trouble Condition or Supervisory Condition
(except PFC-5002). When properly installed with two phone lines,
the DACT-5000 supervises the lines and can be programmed with
the Security Industry Association (SIA) Digital Communications
Standard (DCS) or the Ademco Contact ID protocols. The DACT5000 mounts directly to the PFC-5000 series cabinet and is powered
directly from the main fire alarm panel. The CFG-5000 Configuration
Tool is required to program the DACT-5000.
Wiring Schematic
RIBBON CABLE
TO MAIN BOARD
RING
TIP
OUT
LINE 2
TIP
RING
LINE LED’S
CFG-5000
TIP
RING
IN
OUT
LINE 1
TIP
RING
IN
DWG# 204-1
Engineering Specification
The contractor shall furnish the DACT-5000 Digital Alarm
Communicator Transmitter for communicating an alarm, trouble or
supervisory condition to a monitoring station. The DACT shall be UL
listed and be compatible with the PFC-5000 series fire alarm control
panels. The communicator shall have the capability to supervise the
attached phone lines and report a line failure. The DACT shall be
capable of seizing a phone line, dialing and communicating on the
line. The DACT shall be installed in front of any private telephone
systems in order for the line to be seized and utilized for dialing the
monitoring station. The DACT shall have two LED’s that indicate
line status. The LED’s shall be off when not in use, a red LED shall
indicate the line in use and an amber LED shall indicate a line fault.
Potter Electric Signal Company
PRINTED IN USA
•
A trouble condition shall be communicated if a telephone line signal
is loss, regardless of which telephone line. In addition, a signal shall
be transmitted indicating a restoral of telephone service. If both
telephone lines fail, a trouble condition with activation of the trouble
relay shall activate on the main control panel and the buzzer shall
sound. The DACT-5000 shall be capable of transmitting in either
the Security Industry Association (SIA) Digital Communications
Standard (DCS) and the Ademco Contact ID formats. The DACT
shall be programmed to send a test report once a day at a specified
time. The DACT-5000 shall be programmed using the Potter CFG5000 Configuration Tool.
2081 Craig Road, St. Louis, MO, 63146-4161
•
Phone: 800-325-3936/Canada 888-882-1833
MKT. #8910204 - REV A
2/03
•
www.pottersignal.com
PAGE 1 OF 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising