Discreet Indoor/Outdoor Wall-Plate Camera

Discreet Indoor/Outdoor Wall-Plate Camera
Discreet Indoor/Outdoor
Wall-Plate Camera
Manual
EV-5105-N1SQ (NTSC)
EV-5105-P1SQ (PAL)
EV-5145-N1SQ (NTSC)
EV-5145-P1SQ (PAL)
Includes 1 single-gang
and 1 slimline plate
Includes 1 European plate
1.5mm lens (170° viewing angle)
Sony 1/4” Color CCD
Fits in a single-gang, slimline, or
European plate
Adjustable mounting angle
600 TV lines
Reversible image
Weatherproof (IP67)
Note: Model numbers that end with “Q” or that have a round green “Q” sticker signify RoHS-compliant products.
ENFORCER Weatherproof Discreet Wall-Plate Camera
Specifications:
EV-5105-N1SQ
Type
CCD
Resolution
Video output format
Pickup elements
Video output
Scanning system
Lens
Viewing angle
Minimum illumination
S/N ratio
Gamma correction
Gain control
IP rating
Power source
Current draw
Operating temperature
Camera
Single-Gang
Dimensions
Slimline
European
Weight
EV-5105-P1SQ
EV-5145-N1SQ
EV-5145-P1SQ
Wall Plate Camera
1/4” Sony Color CCD
600 TV lines
NTSC
PAL
NTSC
PAL
768x494 pixels
752x582 pixels
768x494 pixels
752x582 pixels
1.0Vp-p composite video, 75Ω
2:1 Interlace
1.5mm
170
0.5 Lux at F/2.0
>48dB
0.45
Auto
IP67
12VDC±10%
67mA
14 ~122 F (-10 ~50 C)
13/16”x13/16”x11/4”(30x30x35 mm)
23/4”x41/2” (70x114 mm)
N/A
11/2”x41/2” (38x114 mm)
N/A
N/A
37/16”x37/16” (86x86 mm)
3.4-oz (96g) (Camera + 1 plate)
Parts List:
All models include:
1 x Manual
1 x Camera
1 x Angled plastic ring
EV-5105 models only:
1 x Single-gang plate
1 x Slimline plate
1 x Angled rubber ring
1 x Threaded ring
2 x Stainless-steel screws
EV-5145 models only:
1 x European plate
Plate Dimensions:
Single-gang plate
(EV-5105 models only)
Slimline plate
(EV-5105 models only)
23/4” (70mm)
European plate
(EV-5145 models only)
11/2” (38mm)
41/2”
(114mm)
37/16” (86mm)
41/2”
(114mm)
Camera Dimensions:
9/16”
37/16”
(86mm)
(14mm)
13/16”
(30mm)
13/16”
(21mm)
11/16”
(27mm)
11/4” (35mm)
2
SECO-LARM U.S.A., Inc.
ENFORCER Weatherproof Discreet Wall-Plate Camera
Before Starting:
1. Please read this manual carefully and keep it for
future reference.
2. Use the camera within given temperature and
electrical limits.
3. Do not mount the camera where it is exposed to
rain or other moisture, or in humid or dusty places.
4. Do not point the camera at the sun. Heat could
damage the camera, even when not in use.
Overview:
Angled
plastic ring Threaded ring
5. Do not mount the camera in areas exposed to radiation,
strong magnetic fields, or strong electrical signals.
6. Do not open or disassemble the camera. There are no
user-serviceable parts inside.
7. Do not drop the camera or subject it to strong vibrations.
IMPORTANT
Do not cut the video or power wires as warranty will be voided.
12VDC
Note polarity when running power
Plate
BNC connector
Camera
Reverse image wire loop*
Angled rubber ring
Mounting the Camera to the Plate:
*To reverse the camera’s image, cut the reverse image
wire loop. To restore the image to default, reattach the
reverse image wire loop. Make sure bare wires are
protected by electrical tape or a similar coating.
Mounting Options:
With a plate and back box (suggested):
To mount the camera to the plate, position the angled
rings behind the plate, and twist the threaded ring on
to secure the plate to the camera.
Back box not included.
With a plate, but no back box:
Drill a hole in the
wall big enough to
fit the camera.
Mount the plate
directly to the wall.
(See Dimensions.)
If an object installed next to the camera on the wall is
blocking the field of vision, the angled rings may be
installed in front of the wall plate to move the field of
vision forward.
Changing the Mounting Angle:
With no plate and no back box:
Thin wall
Install the angled plastic ring on the front of the plate so
that the camera is tilted. (Approximately 20 )
SECO-LARM U.S.A., Inc.
Thick wall
Min. wall thickness:
5/ ” (8mm)
16
Max. wall thickness:
3/ ” (20mm)
4
Drill a hole in the wall
big enough to fit the
camera. If mounting
to a thick surface, it
may not be
necessary to use the
angled rings.
(See Dimensions.)
3
ENFORCER Weatherproof Discreet Wall-Plate Camera
Troubleshooting:
The screen is blank.
Check that the camera is powered up.
Check that the power supply’s polarity is correct.
Check that the monitor is powered up.
Check that the video cable connecting the camera to the
monitor is connected properly.
The screen image is dim
Clean the lens using a soft, clean cloth.
Check that the light source is adequate.
The screen image has poor contrast.
Adjust the monitor’s contrast knob.
Change the position of the camera.
The screen image flickers.
Change the position of the camera.
The screen image is distorted.
Change the position of the camera.
The camera case is hot.
Check that the correct power supply is in use.
IMPORTANT
Users and installers of this product are responsible for ensuring this product complies with all national, state, and local laws and
statutes related to monitoring and recording audio and video signals. SECO-LARM will not be held responsible for the use of this
product in violation of any current laws or statutes.
WARNING
Stop using the camera if you see a malfunction such as smoke or unusual heat, as it could cause fire or electric shock. Do not open
the case of this device, as there are no user-serviceable components inside.
FCC COMPLIANCE STATEMENT
Information to the user: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his or her own expense.
WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for
a period of three (3) years from the date of sale to the original consumer customer. SECO-LARM’s obligation is limited to the repair
or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or
alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment
is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential personal or
property damages of any kind to the purchaser or anyone else.
NOTICE
The information and specifications printed in this manual are current at the time of publication. However, the SECO-LARM policy is
one of continual development and improvement. For this reason, SECO-LARM reserves the right to change specifications without
notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2011 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in whole or in part,
without the written permission of SECO-LARM.
SECO-LARM U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999
4
Website: www.seco-larm.com
E-mail: sales@seco-larm.com
PIKSR1
MiEV-51x5-x1SQ-N6SQ_1105.docx
SECO-LARM U.S.A., Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising