Project_________________________ Item No._________________________ Quantity_________________________ APPLICATION For High Volume Gas single standalone frying specify Pitco Gas Model 65C+ tube fryer. MODELS AVAILABLE 65C+ (65-80 lbs, 18 x 18” fry area, 150Kbtu/hr) Natural 65C+ (65-80 lbs, 18 x 18” fry area, 150Kbtu/hr) Propane CONSTRUCTION Welded tank with a super smooth machine peened finish ensures easy cleaning. Long lasting, high temperature alloy stainless steel heat baffles are mounted in the heat exchanger tubes to provide maximum heating and combustion efficiency. Standing pilot light design provides a ready flame when heat is required. STANDARD FRYER FEATURES & ACCESSORIES CONTROLS Tank - Mild steel Cabinet - stainless front, door Galvanized sides and back Millivolt Thermostat (T-Stat) Themo-Safety pilot with built in regulator. High Temperature safety limit switch 3/4 NPT rear gas connection 1 ¼” (3.2 cm) Full port drain valve for fast draining Separate Manual gas shutoffs, for front servicing Integrated flue deflector 6” (15.2cm) adjustable legs, easier access to clean Tube rack, allows crumbs & debris into cool zone Removable basket hanger, requires no tools Drain Line Clean out rod Drain extension Fryer cleaner sample packet Choice of basket options : 2-Twin Baskets 1-Full Basket Integrated gas control valve acts as a manual and pilot valve, automatic pilot valve, gas filter, pressure regulator and automatic main valve. Gas control valve prevents gas flow to the main burner until pilot is established and shuts off all gas flow automatically if the pilot flame goes out. Temperature limit automatically shuts off all gas flow if the fryer temperature exceeds 450°F (232°C) ±15°F (±10°C) / 410°F (210°C) for International units. OPTIONS & ACCESSORIES (AT ADDITIONAL COST) Stainless Steel back Stainless Steel tank 6" (15.2cm) adjustable rear and front locking casters Flexible gas hose with disconnect and restraining cable Tank cover 3-Triple Baskets Pitco Frialator, Inc P.O. Box 501, Concord, NH 03302-0501 509 Route 3A, Bow, NH 03304 603-225-6684 FAX: 603-225-8497 www.pitco.com L10-327 Rev 3 02/12 Printed in the USA MODEL 65C+ GAS FRYER MODEL 65C+ GAS FRYER MODEL 65C+ GAS FRYER INDIVIDUAL FRYER SPECIFICATIONS Frying Area 18 x 18 in (45.7 x 45.7 cm) Model 65C+ Cook Depth 3-1/4 - 5 in (8.3 -12.7 cm) Oil Capacity 65-80 Lbs (29.4 - 36.3 kg) FRYER SHIPPING INFORMATION (Approximate) Model 65C+ Shipping Weight 226 Lbs (103 kg) Shipping Crate Size H x W x L 45 x 23 x 38 in (114.3 x 58.4 x 96.5 cm) Shipping Cube 22.8 ft3. (0.6m 3 ) INSTALLATION INFORMATION GAS SYSTEM REQUIREMENTS Gas Type Natural Propane Gas Input Store Supply Pressure * Burner Manifold Pressure * Check plumbing / gas codes for proper gas 4" w.c. (10 mbars / 1 kPa) supply line sizing to sustain burner pressure when 7 - 10" w.c.(17.4 mbars/ 1.7 kPa) 11 - 13" w.c.(27.4 mbars/ 2.7 kPa) 10" w.c. (25mbars/2.5 kPa) all gas appliances are full on. 150,000 BTU's/Hour (44 kW) (145MJ/hr) CLEARANCES (Do Not Curb Mount) Front min. 30" (76.2 cm) Floor min. 6" (15.25 cm) Combustible material Non-Combustible material Fryer Flue Area Sides min. Sides min. Rear min. Rear min. Do not block / restrict flue gases from flow ing into hood or install vent hood drains over the flue. 6" (15.2cm) 6" (15.2cm) 0" 0" SHORT FORM SPECIFICATION Provide Pitco Gas Model tube fired high volume gas floor fryer. Fryer shall be 65-80 lbs oil capacity, 150,000 Kbtu/hr, 18” by 18” fry area, mild steel (or optional stainless) peened tank, stainless front, door, sides. Blow er Free atmospheric burner system, w ith millivolt thermostat and thermo-safety pilot, separate gas shut off, 3/4" npt rear gas connect, recessed cabinet back, 1-1/4" Full port drain. Provide options and accessories as follow s: Pitco Frialator, Inc P.O. Box 501, Concord, NH 03302-0501 509 Route 3A, Bow, NH 03304 Printed in the USA 603-225-6684 FAX: 603-225-8497 www.pitco.com L10-327 Rev 3 02/12 We reserve the right to change specifications without notice and without incurring any obligation for equipment previously or subsequently sold.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project