FPS-OCM
FPS-OCM
Front patching shelf for optical component module
The FPS-OCM is a mechanical shelf
assembly that accommodates LGX type
modules in a rack environment. The shelf
is typically used in 19” active racks or data
racks, but is also compatible with Tyco
Electronics FIST racks.
All shelves have front access to the LGX
modules. The patchcords enter and exit from
the front of the shelf.
The shelves are painted (powder coated)
light gray (RAL 7035) except for the
FPS-OCM-I-F-4U-Shelf (shown at right)
which is black. They can be front- or backmounted in the rack.
The units have the following features,
depending on the shelf dimensions (rack
unit):
1RU
•
•
Mounting bracket with slotted hole
enables any recessed rack mounting
Compatible with OCM1 and high density
OCMF modules.
3RU
•
High density shelf for OCMF and
compatible with OCM1, 2 and 3.
4RU/5RU
•
There are two 4RU shelf options:
FPS-OCM-I-O, including a plastic
transparent cover including identification
label.
FPS-OCM-I-F-4U-Shelf, including routing
rings for patchcord overlength storage.
Also includes the cover and ID label.
•
A storage basket for patchcord
overlength storage is optionally available.
It occupies 1 height unit (19” standard )
and can be mounted under the
FPS-OCM-I-O. Storage basket
assembled with 4U shelf is available as
a kit, FPS-OCM-I-S. Shelf for use with
LGX modules and compatible with OCMF
modules when the optional OCMF frame
is installed.
Dimensions and ordering guide
Description
Dimensions
1RU
FPS-OCM-K-F
19” shelf, up to 3 OCM1 or 6 OCMF modules
3RU
FPS-OCM-I-F
19” shelf, up to 12 OCM1 or 24 OCMF modules
H
W
D
44
481
225
H
W
D
133
481
235
H
W
D
Accessories
Ordering reference
Description
FPS-OCM-MB2-M-F ETSI mounting brackets
4RU/5RU
FPS-OCM-I-0
19” shelf without storage basket (4RU)
173
481
279
FPS-OCM-I-S
19” shelf with storage basket (5RU)
217
481
279
177
465
483
FPS-OCM-I-F-4U-SHELF
19” shelf with pigtail routing rings (4RU)
FPS-OCM-I-O
FPS-OCM-I-F-4U-SHELF
Accessories for FPS-OCM-I-O and FPS-OCM-I-S
Ordering reference
Description
FPS-OCM-MB2-M
ETSI mounting brackets
FIBRB-MB-B
Mounting bracket adapter for use in 23” racks
FPS-OCMF-6F
Adapter frame for up to 6 OCMF modules. Max. 2 frames/shelf possible
FIST, TE logo, and Tyco Electronics are trademarks.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, Tyco Electronics
makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. Tyco Electronics’ obligations shall only be as set forth in Tyco
Electronics’ Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising out
of the sale, resale, use or misuse of the product. Users of Tyco Electronics products should make their own evaluation to determine the suitability of each such product for the
Tyco Electronics Corporation
8000 Purfoy Road
Fuquay Varina, NC 27526-9349
Tel: 919-557-8900
Fax: 919-557-8498
www.tycoelectronics.com
www.us.telecomosp.com
© 2009 Tyco Electronics Corporation. All rights reserved.
F727.06/09
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising