723110 DC UPS Battery Management System Data sheet US
Technical data sheet · DC UPS Battery Management System
240 W
Subject to technical modification 723110
Identification
Type
Part-No.
CNUPS24
723110
Description
Uninterrupted DC system voltage
DC UPS for lead batteries
Input: DC 24 V, Output: max. DC 10 A
04.04.2017 – Subject to technical modification
Part-No. 723110
USA: LUTZE INC.
13330 South Ridge Drive • Charlotte, NC 28273, USA
Tel. +1 (704) 504-0222 • Fax +1 (704) 504-0223
www.lutze.com • info@lutze.com
United Kingdom: LÜTZE Ltd.
Unit 3, Sandy Hill Park
Sandy Way, Amington • GB-Tamworth, Staffs B77 4DU
Tel. +44 (0)1827 31333-0 • Fax +44 (0)1827 31333-2
www.lutze.com • sales.gb@lutze.co.uk
page 1 of 3
Technical data sheet · DC UPS Battery Management System
Input
Input voltage
Input current
Status display input
Protection device
DC 26–28.5 V
DC 3 – 20 mA
LED green: PS Ok, LED red: Reverse polarity
LED green: Battery OK, LED red: Battery low
Button/LCD display
Software Powermaster
(free Download Lütze web page)
none
Energy storage
Memory type
Nominal battery voltage
max. charging current
max. battery capacity
Max. output current
Backup time
Fuse for memory medium
Deep discharge protection
chemical (lead based, Ni-MH / Ni-Cd, Li-ION / LiFePo4)
DC 24 V
DC 2 A or DC 4 A
75 % @ 26 V, 85 % @ 27 V, 100 % @ 28 V
10 A
depends on battery and charging current
Vehicle fuse 15 A / 42 V
18.5 V ± 0.5 V
Output
Rated voltage UN
Output voltage
Rated current IN
Max. output current
DC 24.00 V
DC 20 - 28 V
20.00 A
DC 10 A
Status indication
Status display output
LED yellow: Load OK
Monitoring
Number of channels
Monitored functions
Switching voltage
Switching current
Contact type
1
Battery mode
DC 24 V
DC 1 A
Change over contact
General
Insulation voltage input / ground
Operation temperature range
Storage temperature range
Relative air humidity
Cooling
0.5 kV, 1 min.
-20 °C … +50 °C
-20 °C … +85 °C
95 % not condensing
free convection
Parameterisation
04.04.2017 – Subject to technical modification
Part-No. 723110
USA: LUTZE INC.
13330 South Ridge Drive • Charlotte, NC 28273, USA
Tel. +1 (704) 504-0222 • Fax +1 (704) 504-0223
www.lutze.com • info@lutze.com
United Kingdom: LÜTZE Ltd.
Unit 3, Sandy Hill Park
Sandy Way, Amington • GB-Tamworth, Staffs B77 4DU
Tel. +44 (0)1827 31333-0 • Fax +44 (0)1827 31333-2
www.lutze.com • sales.gb@lutze.co.uk
page 2 of 3
Technical data sheet · DC UPS Battery Management System
Housing material
Mounting
Installation position
Protection class
Over voltage category
Degree of polution
Weight
Connection device
Dimensions (w × h × d)
Approvals
Standards
PU
Comments
Aluminum
Can be snapped onto hat profile TS35
(EN 60715)
vertical, with 20 mm distance to other devices
IP20 (EN 60529)
II
2 (IEC 664-1)
0.300 kg/piece
Connector with screws: 2.5 mm2(AWG 24–12)
54.0 × 115.0 × 110.0 mm
cULus (E249179)
CE
EN 60950-1
EN 61000-6-2/4
1 Quantity
Suitable for power supply with settable output voltage
Load mode with simultaneous charging
Integrated battery fuse
Deep discharging protection
Dimensions
04.04.2017 – Subject to technical modification
Part-No. 723110
USA: LUTZE INC.
13330 South Ridge Drive • Charlotte, NC 28273, USA
Tel. +1 (704) 504-0222 • Fax +1 (704) 504-0223
www.lutze.com • info@lutze.com
United Kingdom: LÜTZE Ltd.
Unit 3, Sandy Hill Park
Sandy Way, Amington • GB-Tamworth, Staffs B77 4DU
Tel. +44 (0)1827 31333-0 • Fax +44 (0)1827 31333-2
www.lutze.com • sales.gb@lutze.co.uk
page 3 of 3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising