Secto Design Oy Kauppalantie 12 02700

Secto Design Oy Kauppalantie 12 02700
Secto Design Oy
Kauppalantie 12
02700 Kauniainen
Finland
tel. +358 9 5050598
fax +358 9 5475 2535
info@sectodesign.fi
www.sectodesign.fi
Victo 4250 pendant
natural birch, black laminate or white laminate, walnut veneer









The shade is made of form pressed birch slats
White and black finishes have been laminated
Walnut finish has a waxed walnut veneer on top
Height of the shade 48 cm, diameter 56 cm, weight 1,3 kg
The cable is a heat-resistant textile cable, standard length 150 cm, comes with a
ceiling plug + ceiling cup
Bulb base E27
Included light bulb:
Megaman LED Classic, E27, 11 W, 1055 lumen, 2800 K, warm white
International Protection Rating: IP20
Dimension of the box: 59 x 59 x 55 cm, 3 kg
Please note that there must always be 15 mm around the bulb for air circulation. The use of special
bulbs such as halogen, mirror or 12 V bulbs in Secto Design lamps is forbidden, due to overheating.
June 2015 1/1 1
Standard cable set
Weight
Cable length
Colour
192 g (incl. all parts)
150 cm (longer cables available upon request at additional cost)
White or black matt soft lacquer depending on the colour of the pendant
Information
The standard cable set includes the lamp base, a textile cable, a ceiling cup, a
hook and an additional ring. A ceiling plug (pictured) is included in the deliveries
to Finland and Sweden; deliveries to other countries include a connector (not
pictured).
Please check the separate ceiling cup instruction leaflet for more details and
installation instructions.
Secto Design Oy | Kauniainen, Finland | +358 9 505 0598 | info@sectodesign.fi | www.sectodesign.fi
June 2015 1/1 1
Standard ceiling cup white/black
Height
Outer upper Ø
Inner upper Ø
Weight
Colour 11,2 cm / 12 cm (with ring)
12,2 cm / 13,1 cm (with ring)
11,8 cm / 12,2 cm (with ring)
58 g / 74 g (with ring)
White or black matt soft lacquer depending on the colour of the pendant
Information
The standard ceiling cup includes an additional ring, which enables leading the
cable along the ceiling into the ceiling cup. The additional ring can also be used
to cover a larger ceiling socket.
Extra cable can be swirled into the ceiling cup when altering the hanging height
of the pendant.
The ceiling cup is a part of the cable set which includes also the lamp base, a
textile cable, a hook and a ceiling plug or connector.
Please check the separate ceiling cup instruction leaflet for more details and
installation instructions.
Secto Design Oy | Kauniainen, Finland | +358 9 505 0598 | info@sectodesign.fi | www.sectodesign.fi
Handmade birch pendant by Secto Design
Design: Seppo Koho
Käsintehty Secto Design -koivuvalaisin. Suunnittelija: Seppo Koho
Tight fit guaranteed
This Secto Design pendant uses the patented
ceiling suspension by Dezall.
Easy and quick to install, enables the ceiling cup
to sit perfectly tight against the ceiling.
Ceiling cup by Dezall
Finish:
White or black matt soft lacquer
Height: 112mm (120 with the additional ring)
Upper diameter: 118mm inner / 122mm outer (122/131 with ring)
Recommended length of ceiling hook:
15-46mm (20-54 with ring)
Textile cable:
White or black – standard length 1.5m (other lengths available) – unearthed – E27 – 230V – Max 42W
Tässä Secto Design-valaisimessa käytetään
Dezallin patentoimaa ripustusmenetelmää.
Helppo ja nopea kiinnittää, mahdollistaa
kattokupin asettumisen tiukasti kattoon.
Dezall-kattokuppi
Väri: Valkoinen tai musta, mattapinta
Korkeus: 112 mm (120 renkaan kanssa)
Ylähalkaisija: 118 mm sisäpuoli, 122 mm ulkopuoli (122/131 renkaan kanssa)
Kattokoukun suosituspituus: 15-46 mm (20-54 renkaan kanssa)
Tekstiilijohto:
Valkoinen tai musta – standardimitta 1.5 m – maadoittamaton – E27 – 230 V – Max 42 W
Installation
Kiinnitysohje
3.
1.
2.
Fasten.
Kiinnitä.
Fasten the cable into the screw at the desired hanging
height. Start with the lower side hole, push it into the
channel and finish with the upper side hole.
Hang on the ceiling hook and connect.
Kiinnitä johto ruuviin haluamallesi riippumiskorkeudelle
aloittaen alemmasta sivureiästä, asettaen johto sen jälkeen ruuvin sisään ja lopuksi vielä ylempään sivureikään.
Ripusta kattokoukkuun ja kytke.
Screw.
Kierrä.
Finished.
Valmis.
Arrange the spare cable and screw the ceiling cup on the screw
until the cup sits tightly against the ceiling.
If the power cable comes from the side, use the ring provided
and push off one of the side outlets to make room for the cable.
Kiedo ylimääräinen johto kerälle ja kierrä sen jälkeen kattokuppi
kiinni ruuviin, kunnes kuppi on tiukasti kiinni katossa.
Jos sähkö vedetään pintavetona sivusta, irrota yksi renkaan
ulostuloista johtoa varten.
For more details visit sectodesign.fi/products
Lisätietoja osoitteesta sectodesign.fi/products
sectodesign.fi
Secto Design Victo 4250
This luminaire is
compatible with bulbs
of the energy classes:
A++
A+
A
B
C
D
E
874/2012
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising