internal connectors for ffc and fpc

internal connectors for ffc and fpc
ENGINEERED TO CONNECT
INTERNAL CONNECTORS
FOR FFC AND FPC
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
1
BOARD-TO-CABLE CONNECTIONS FOR FFC AND FPC
Board to cable connections for FFC and FPC are the one of the most important way to transfer data.
Yamaichi is offering a wide range of these connector solutions. ZIF-Connectors as well as non-ZIF
connectors are available. The most of the offered connectors are able to transmit High Speed Signals up
to 10Gbps and are fulfilling the special requirements for all the new High Speed applications which are
based on the different new Input/Output standards like the USB 3.1.
Besides the connectors Yamaichi is supplying also the fitting cables, like standard FFC,
High Speed FFC and YFlex, a special High Speed FPC, for highest transmission rates in perfect quality.
Overview of connector systems and possible cable solutions
Connector
Position
Pitch
(mm)
Shielding
90°
180°
Locking
Function
High Speed
Trasmission
Applicable Cable Type
FFC
HS FFC
YFLEX
Y-Lock
0.5 - 1.0
x
x
no
FPC Series
0.5 - 1.0
x
x
no
HF507S
0.5
x
x
posssible
x
x
x
x
HF509S
0.5
x
posssible
x
x
x
x
HF513S
0.5
posssible
x
x
x
x
HF601
0.5
no
x
x
x
x
x
x
x
x
x
x
APPLICATIONS:
Our ZIF/non-ZIF connectors and cable systems are tested and used for a high variety
of applications.
- Automotive e.g. infotainment systems, camera systems, steering systems
- Medical
- Industrial
- Consumer electronics
2
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
NON-ZIF CONNECTORS
Y-LOCK® PULLFORCE SERIES
The Y-Lock connector family is combining a space saving and process securing design with smart
and reliable technology. The connector system is designed for applications with tough requirements.
Available now in two different generations the Y-Lock is able to fulfill a large spectrum of tasks in
regard to mechanical, climatic and electrical specifications.
SPECIAL FEATURES
•Non-ZIF Board-to-Cable system
•FFC has just to be pushed in (push-lock)
and can be pulled out (pullforce)
without any further action
•Various pin counts available
•Automatic assembly of FFC is possible
•Quick and easy assembly
•Poka-Yoke system
•Pitches: 0.5 and 1.0mm
•90° and 180° versions
•Production site TS16949 certified
•RoHS2011/65/EU
Y-LOCK GEN1
Y-Lock GEN1
Y-LPF
Locking function between the supporting tape on
the FFC and the connector. Small hooks on the inner
housing of the connector insulator ensures the locking
function between the FFC and connector.
-
Y-Lock GEN2
C * - 12 - S * - BF - R
Series No.
Connector
Pitch: 1 = 1.00mm
5 = 0.50mm1)
Pin Count: 12 to 30
Terminal Style: S = SMT
Orientation: 1 = 180° 9 = 90°
Plating: Mating / Termination Area
BF = 0.3µm Au / Flash Au
E
MOTIV
AUTO IANT
L
COMP
Tape and Reel with Pick & Place Cap
1)
0.50mm pitch available with 30 pins
Y-LOCK GEN2
Y-LPF
Additional stiffener is assembled mechanically on the
FFC. Locking function between stiffener and connector.
Poka-Yoke system means it is not possible to insert the
FFC in wrong direction. The use of the stiffener is guiding
the FFC during insertion.
E
MOTIV
AUTO IANT
L
COMP
-
C 5 - ** - S 1 - BF - REDC
Series No.
Connector
Pitch: 5 = 0.50mm
Pin Count: 18 and 50
(other pin counts on request)
Terminal Style: S = SMT
Orientation: 1 = 180° (90° available on request)
Plating: Mating / Termination Area
BF = 0.3µm Au / Flash Au
Tape and Reel with Pick and Place (800 pcs./reel)
FFC
Yamaichi is offering the complete system including the FFC. For the second generation the stiffener is already assembled.
Ordering code for FFC cable
Series
-F
F = FFC
x
Pitch
1 = 1.0mm
5 = 0.5mm
- xx
- xxx
Pin Count
12 to 30/50
(depending on the pitch)
Total Length
in mm
Y-LPF
-x
Direction
Supporting
Tape
A = same
B = opposite
x
Additional
Stiffener
(GEN2 version only)
0 = one cable side
(with other mating design)
-F
Plating
Termination
Area
F = Au Flash
-V
UL No.
V = UL20706
2 = two sides
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
3
NON-ZIF CONNECTORS
HF507S SERIES
GENERAL INFORMATION
•Pin count: 21, 31, 41, 51 pins
•With and without shielding
(except pins 21 & 31 in 180° version)
•Pitch: 0.5mm
•Direction: 90° and 180°
HF507S
- ** - **
Series No.
No. of Contacts
21, 31, 41 and 51
02 = 180° without Shielding
04 = 90° with Shielding1)
1)
180°with shieldingnot available for 21 and 31 pin versions
FEATURES OF HF507S
•Up to 5Gbps transmission rate
•Locking mechanism
•Auto vacuum mounting capability
•Differential impedance: 100Ω
•Suitable for LVDS, HDMI, DVI,
PCI express and S-ATA data transmission
• RoHS2011/65/EU
Locking mechanism on both sides
provides easy operation.
Prevents cable angular insertion and
guarantees secure locking
HF507S**72 SERIES - DIRECT MATING
GENERAL INFORMATION
•Pin count: 41, 51 pins
•Shielded version
•Pitch: 0.5mm
•Direction: 90°
HF507S
Series No.
No. of Contacts 41 and 51
Design No.
FEATURES
•Same features as HF507S standard type
•Locking function through special direct mating mechanism
• RoHS2011/65/EU
CABLES TO BE USED:
•YFLEX customised cable (refer to page 6)
•High Speed FFC with adapter
•High Speed FFC direct mating type without adapter
4
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
-
**
-
72
NON-ZIF CONNECTORS
HF509 SERIES
GENERAL INFORMATION
•Pin count: 10 pins
•Pitch: 0.5mm
•Direction: 90°
HF513
- 10
HF513
-
- 03
Series No.
Pin Counts =10
Design No.
FEATURES
•Impedance matching design
•Non-ZIF type with function to avoid mis-operation such as
cable being diagonally inserted or cable coming off
•EMI reinforced design with connecting between metal shell
of adapter and metal shell of receptacle
•For IEEE1394, LVDS, TMDS, S-ATA, PCI-Express applications
• RoHS2011/65/EU
CABLES TO BE USED:
•YFLEX customised cable (refer to page 6)
HF513 SERIES
The new connector series is a very low profile
connector with High speed transmission rates
up to 10Gbps. It is a direct mating type,
the locking function ensures a reliable position
of the cable with the connector. The HF513 series
is available with or without shielding and ground contacts.
**
-
Y*
Series No.
Pin Counts = 30, 40 and 50
Y0 = No Additional GND Contact for Shielding
Y1 = Additional GND Contact for Shielding
GENERAL INFORMATION
•Pin count: 30, 40 and 50 pins
•Pitch: 0.5mm
•Direction: 90°
•Other versions on request
FEATURES
•Up to 10Gbps data transfer rate (if used with YFlex cable)
• Direcrect mating type. For releasing only button on connector
has to be pressed
• Push in locking (for releasing the button has to pressed)
• With and without additional shielding pins
• RoHS2011/65/EU
CABLES TO BE USED:
•YFLEX customised cable (refer to page 6)
•High Speed FFC
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
5
ZIF CONNECTORS
HF601 SERIES
The HF601 ZIF series is a very smart connector family. It combines
very small design with highly sophisticated technical features. The
standard version is able to transmit up to 1Gbps, the high speed
version up to 5Gbps. The connector can be used with FFC with
ears for an improved locking function.
1)
HF601 - 22 - 03
Series No.
Pin Count = 22
Design No.
GENERAL INFORMATION
•Pin count: 10 to 60 depending on type
•Pitch: 0.5mm
•Direction: 90° and 180°
2)
HF601 - ** - 02
Series No.
Pin Counts: 10, 20, 30, 40,
45, 50 and 60
FEATURES
•High speed function 1Gbps
•Single types can transmit up to 5Gbps
•FFC with or without ears for additional locking
•Various pin counts in 90° and 180°
•RoHS2011/65/EU
02 = 90° Type
3)
HF601 - ** - 12
Series No.
Pin Count: 30, 40, 45 and 50
12 = 180° Type
1)
22 Pin type (up to 5Gbps)
2)
90° Type (up to 1Gbps)
3)
180° Type (up to 1Gbps)
CABLES TO BE USED:
•YFLEX customised cable (refer to page 6)
•High Speed FFC
•Standard FFC
FPC SERIES
FC
The FPC Series is a tray type ZIF connector
with 0.5mm and 1.0mm pitch with a high
amount of possible different pin counts
-
P0.5 - C* - 21 -32 - A - 4 - L - *
Series No.
Pitch:
P0.5 = 0.5mm P1.0 = 1.0mm
GENERAL INFORMATION
•Pin count: 10 to 60 depending on type
•Pitch: 0.5mm
•Direction: 90° and 180°
Conductor Cross-section
(Thickness x Width)
C1 = 0.05 x 0.65mm (P= 1.00mm)
C6 = 0.035 x 0.3mm (P= 0.50mm)
FEATURES
•Bottom and top contacts
• RoHS2011/65/EU
Insulation Length in mm
(= Complete length minus 2 x strip length)
CABLES TO BE USED:
•Standard FFC
6
Number of Conductors
Cable Type / Styles (see drawing below)
Length of Stripped Conductor in mm (dimension S)
Plating:
L = Tin
C = Au Flash
UL Styles:
No Mark = UL2896
V = UL20706
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
YFLEX - HIGH SPEED FPC
Our different ZIF/Non-ZIF connectors are able to be used with standard FFC, High Speed FFC
or YFLEX (High Speed FPC). The usage of the different cables is depending on the transfer rate.
Standard FFC can transfer up to 480Mbps, High Speed FFC’s can transfer up to 3Gbps and
YFLEX is able to transfer up to 10Gbps.
YFLEX SERIES
FEATURES
• Available to transmit high speed up to 10Gbps with low loss
• Effective to use at harshest temperature,
humidity and EMI condition
• Customized depending on the layout and requirement
• Stable differential impedance of 100 Ohm (+/- 10%)
STRUCTURE TO ACHIEVE HIGH SPEED
TRANSMISSION
GND
Signal Signal GND
LCP achieves the
transmission with
a low dielectric loss
Copper Film Ground
Bump
GND and copper film
ground are connected
with silver bumps which
also protectfrom EMI
DIFFERENCE BETWEEN YFLEX & STANDARD FPC
YFLEX - FPC
STANDARD POLYIMIDE - FPC
1. Conductive Bump Printing
Bumps
Copper
1. Polyimide-Copper laminating
Copper
Polyimide
2. Set-up
LCP
3. Heat Press
4. Etching
Copper
Copper
2. Drilling
3. Plating
3. Etching
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
7
YAMAICHI ELEC TRONICS
Deutschland GmbH
Concor Park
Bahnhofstraße 20
85609 Aschheim-Dornach
Germany
YAMAICHI ELEC TRONICS
Italia s.r.l.
Centro Direzionale Colleoni
Via Colleoni, 1
Palazzo Taurus Ing. 1
20864 Agrate Brianza (MB)
Italy
YAMAICHI ELEC TRONICS
GB Ltd.
6 The Clockhouse
Stratton Park
Micheldever
Hampshire SO21 3DP
Great Britain
Phone +49 (0)89 45109 - 0
Fax +49 (0)89 45109 - 110
E-Mail info@yamaichi.de
Webwww.yamaichi.eu
Phone +39 039 6881-185
Fax +39 039 6892-150
E-Mail sales@yamaichi.it
Webwww.yamaichi.eu
Phone +44 (0)7808 493377
Fax +44 (0)1962 774902
E-Mail sales@yamaichi.co.uk
Webwww.yamaichi.eu
8
Version Sept. 2016
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising