Instructions for Use
Instructions for Use
Tumble Dryer
Thank you for your trust and for buying our tumble drier. We congratulate you
on your wise decision.
This appliance is designed for drying clothes for home use only.
The dryer enables quick drying of your laundry, leaving it soft and tender
without affecting its shape.
Our appliances are environmentally friendly: some of the materials are
recyclable while others are disposed of and destroyed. To protect the
environment, dispose of your appliance by delivering it to the authorized dealer.
The appliance is intended exclusively for use in households. If the appliance is
used for professional purposes, for profit, or for purposes beyond regular use
in a household, or if appliance is used by a person who is not a consumer, the
warranty period equals the shortest warranty period possible as stipulated by
the relevant legislation.
129316
Appliance description ....................................... 3
Warnings ............................................................ 4
Installation and connection .............................. 6
Operation.......................................................... 10
Tips for drying and for economic use of the
dryer.................................................................. 15
Cleaning and maintenance ............................. 16
Troubles............................................................ 19
Tables ............................................................... 21
2
Appliance description
Front panel
Drying program button
Water container
Door
Condenser
Technical data
(depending on model)
6.
7.
8.
9.
Evacuation slots
Cooling air slot
Legs
Front (depending on model)
Dimensions of the appliance (w x d x h):
600 mm x 600 mm x 850 mm
Weight (net):
evacuation dryer 33 kg, condensation dryer 40 kg
Nominal voltage: 230 V, 50 Hz
Connecting power: 2500 / 2800 W (depending on
model)
Max. load: 6 kg / 7 kg
Connection: power cord (230 V, 50 Hz, min 16 A)
Fuse: 16 A
Heater: 2300 / 2500 W (depending on model)
Name plate with technical information for the appliance is located
under the door frame.
3
129316
1.
2.
3
4.
5.
Warnings
• Use the dryer to dry only the laundry washed with water. Do not attempt to
•
•
•
•
•
•
•
•
•
•
•
•
dry the laundry, washed or cleaned with flammable detergents or solutions
(gasoline, trichloroethylene etc.), as it may cause explosion.
Do not let the children play with the appliance. Prevent your children or pets to
enter the dryer drum.
When discarding the old appliance remove the power cord and breka the lock,
so that the door can not be locked (safety precautions for children).
After cleaning replace the condenser to the air channel. Operating the
appliance without the condenser or with a damaged condenser may cause
fire.
Rear wall of the appliance may be hot (for condenser drier only) - danger of
burns.
Clean filter after each drying. If you pulled the filter out, always reinsert it
before the next drying operation.
After use always turn the appliance off (the program selection jog (A) should
be in position “0”) and unplug the power cord.
Close the dryer door prior pulling out the water container.
Leave all repairs to a qualified technician. Tampering with the appliance or
reparations by an unqualified person may cause accidents or failures. Call the
authorized service department (see list of authorized service departments).
Name plate with technical information about the appliance is located under
the door frame.
The room must be well aired, surrounding air must not contain dusty particles.
Room where the appliance is located must be well aired to prevent back flow
of gasses, released by open fire gas appliances (fireplace).
The warranty shall not apply to consumables (bulbs), minor discoloration or
deviations of color, increased noise level as a consequence of appliance age,
which does not affect appliance functionality, and aesthetical deficiencies
which do not affect appliance functionality or safety.
129316
To reduce the fire hazard, always consider the following:
• Do not dry unwashed items in the tumble dryer.
• Items that have been soiled with substances as cooking oil, acetone, alcohol,
petrol, kerosene, spot removers, turpentine, waxes and wax removers should
be washed in hot water with an extra amount of detergent before being dried
in the tumble dryer.
• Items such as foam rubber (latex foam), shower caps, waterproof textiles,
rubber backed articles and clothes or pillows fitted with foam rubber pads
should not be dried in the tumble dryer.
• Fabric softeners, or similar products, should be used as specified by the fabric
4
softener instructions.
• The final part of a tumble dryer cycle occurs without heat (cool down cycle) to
ensure that the items are left at a temperature that ensures that the items will
not be damaged.
Before connecting the appliance read
these instructions carefully. Repairing
the failure arising from inappropriate
connections or use of the appliance is not
covered by the guarantee.
The belt can be replaced by a servising
engineer only, who incorporates an
original spare part with the marking
OPTIBELT EPH 1906, code 104265,
OPTIBELT 8 EPH 1941, code 160165
(depending on model).
The symbol on the product or on its
packaging indicates that this product
may not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which
could otherwise be caused by
inappropriate waste handling of
thisproduct. For more detailed information
about recycling of this product, please
contact your local city office, your
household waste disposal service or the
shop where you purchased the product.
129316
Never stop a tumble dryer before the end
of the drying cycle unless all items are
quickly removed and spread out so that
the heat is dissipated.
5
Installation and connection
Removing wrapping
• Packaging materials are environmentally friendly:
•
they can either be recycled, safely disposed of or
destroyed without any threat to the environment.
To be able to do this effectively all materials are
marked accordingly.
Be careful not to damage cabinet of the
appliance with a sharp object when
removing the packaging.
Before connecting the appliance, let it
warm up to room temperature (wait for two
hours).
Selecting the
appropriate location of
the appliance
Ventilation slots and openings on the appliance
front and rear wall should not be obstructed.
A - Evacuation dryer
• Place the appliance in a well ventilated room with
a window or a built-in fan.
• Connect the evacuation tube to the pre-prepared
opening.
• Evacuation must not be connected to air duct
used as a chimney for exhaust gasses of
appliances using other combustion material.
B - Condensation dryer
• Do not place the appliance in a room where there
is danger of freezing.
• Location should be adequately ventilated. Room
temperature should always be between 0°C and
25°C since frozen water in the condensation
container or in the pump may damage the dryer.
129316
6
• Appliance can either stand on its own or can be
placed on top of a washing machine of the same
dimensions - minimum width 517 mm, depth 476
mm. The surface for placing the dryer must be
clean and flat. Use supplied vacuum feet to
prevent sliding of the appliance. Washing machine
hardtop must be wooden or metallic. To conceal
the opening between the two appliances,
decorative plate is available on request against
payment.
Do not place the appliance behind lockable
door, sliding door, and door with hinges on
the opposite side of the appliance.
Place the appliance in the room in such
way to ensure free opening of the drier
door.
• Level the machine longitudinally and transversally
by rotating the adjustable feet, thus enabling the
leveling by +/- 1 cm.
Vibrations, moving of the appliance and
loud operation due to incorrect setting of
the adjustable feet shall not be covered by
this warranty.
The appliance should be placed on a
surface with concrete base; the surface
should be dry and clean in order to prevent
slipping. The adjustable feet should also
be cleaned before installation.
Do not place the dryer on a thick
carpet since this could obstruct the air
circulation.
129316
Installation
7
Moist air outlet
A - Evacuation dryer
• There are two openings for the evacuation of
humid air. One of them should be closed with the
supplied lid, while the other should be connected
to the evacuation tube.
1 Lid
2 Evacuation tube
The distance between the dryer and the
moist air outlet (ventilation shaft, window)
should not exceed 2 meters, otherwise
water can accumulate in the tube.
B - Condensation dryer
• Moisture from laundry is extracted in the water
•
129316
8
condensation device and is either collected in the
receptacle or discharged directly into the drain
(drain height should not exceed 800mm).
The signal light indicates that the container is
full and should be emptied, preferably after each
drying cycle.
• Use the power cord to connect the dryer to the
power supply via wall socket.
• Rated voltage and other characteristics are
indicated on the name plate, located under the
door frame of the appliance.
The wall socket should always be within
reach. It has to be earthed according to the
standing regulations.
If the supply cable is damaged it should
only be replaced by a qualified technician.
129316
Power connection
9
Operation
A - program selection jog
B - lower temperature button
C - heater off key
D - START/PAUSE button
E - ON/OFF LED
F - filter alarm/water container alarm LED
Drying procedure
- Open the dryer door by pushing the left-hand
side of the door towards the appliance (make
sure the drum is empty).
- Sort the laundry according to the type of fabrics.
Do the buttons and zippers, tie the strings
and pull out the pockets.
Very delicate laundry should be put in a
special protective sack.
It is suggested to load the drum with items
of different sizes.
Do not load drip-wet laundry into the dryer
(min. 800 rpm).
Pay attention to the labels on the clothes,
indicating the recommending drying mode
(see table of textile treatment symbols on
the last page).
129316
10
- Insert the laundry into the drum (prior making
sure that the drum is empty).
- Close the dryer door.
- Select drying time
• By turning the drying time selector, set the
preferred drying period, according to the type and
quantity of laundry and washing machine spin rpm
(see drying program chart). Selector jog may be
turned in both directions. Available time span is
from 15 min. to 140 minutes, LED (E) is flashing.
Final 10 minutes of the drying cycle is the cooling
period (the heater is off).
• It is also possible to select the ventilation
program, lasting 20 minutes ( ). During this
program the heater is off.
- Selection of additional functions
Additional functions are selected prior pressing the
START button (D).
Decreasing the temperature
By pressing the button (B) the drying temperature
is decreased, the LED over button is on; this way,
however, the drying cycle is longer. It is therefore
recommended for only drying delicate laundry.
After the drying is completed, the function
returns to initial higher temperature.
Heater off
Turn the heater off by pressing button (C) (if you
wish to dry laundry at room temperature); LED
above button is on.
129316
Operating the dryer
11
Drying procedure
• Press the START/PAUSE button (D) - LED E is
•
•
•
on, appliance starts to operate (after a 2 second
pause).
10 minutes prior the end of drying program the
machine starts the cooling cycle (heater is off),
which prevents excessive creasing.
At the end of the cooling program the appliance
switches on the anti-crease program, which lasts
for 1 hour (periodic tumbling of the drum); LED (E)
is flashing.
If you open the dryer door the anti-crease
program is suspended.
- End of drying
At the end of drying LED (E) flashes,
which means that the drying program
is completed. LED (F) is on, which for
the evacuation type of dryer requires
cleaning of filter, and for the condensation
type cleaning the filter and draining the
container.
• Open the dryer door by pushing the left-hand side
of the door towards the appliance.
• Remove the laundry from the dryer.
• Turn the appliance off by turning the jog selector
(A) to the position “0”.
• Clean the lint filter (see chapter on Cleaning and
Maintenance).
• Close the dryer door.
• Empty the water container (this applies for
•
129316
12
condensation dryers only - see Cleaning and
Maintenance) and replace it back to its slot.
Pull the power lead from the socket, disconnecting
the appliance from the mains.
• By the user
After drying be careful when extracting
laundry from the appliance, as it may be
hot!
Suspending the operation by pressing the
START/PAUSE button.
In case you press the START/PAUSE button (D)
during the drying procedure, the drying program is
suspended, and with the next press of the same
button the program is resumed where it had been
interrupted.
Changing the program or the functions
If you wish to change the drying time during the
drying procedure, move button (A) to the position
“0” (for about 1 second), set new drying time and
press the START/PAUSE button (D).
The same procedure applies if you wish to change
settings (selection of functions by means of
buttons).
Door opened
If the door is opened during the drying process
this will pause the operation (the (E) LED flashes
intermittently). The drying process is resumed by
closing the door and pressing the START/PAUSE
button (D) from the point where it had been
interrupted.
• Power failure
If a power failure occurs during the operation of
the dryer, this requires that drying time is reset
again, and all extra functions are reselected
(LED E flashes as at the commencement of the
program).
129316
Interruptions
13
• Water container is full
(condenser appliance only)
When the container is full, signal lamps (E)
and (F) are flashing. The drying program is
interrupted. When the container is emptied, press
the START/PAUSE button (D) to reactivate the
drying program.
129316
14
Tips for drying and for economic use
of the dryer
• Drying is economically most effective if you dry
•
•
•
•
129316
•
the recommended quantity of laundry per one
charge (see Program Chart).
Do not dry the laundry made of especially
sensitive fibers (wool, silk), which may shrink or
lose shape.
It is not necessary to use a fabric conditioner
when washing the laundry, since drying makes it
soft and tender.
Drying time is much shorter and consequently the
energy consumption lower if laundry is well spun
prior tumble dring (minimum 1000 spin RPM).
By selecting the most suitable drying program,
you will avoid over-drying and defficult ironing.
By cleaning the filter on regular basis drying time
is shorter and consumes less energy.
15
Cleaning and maintenance
Cleaning the filter
• After every drying clean the filter, located in the
inner part of the door.
• Lift the filter lid (Fig.).
• Pull your fingers over the filter to remove fibers
and threads lining. Replace the filter cover.
• If necessary, also clean the filter housing and door
sealing.
Cleaning of the filter on the lower side of the
door opening (only with some models)
Before removing clothes from the drum, clean the
filter on the lower side of the door opening with a
damp cloth or wet hand.
If the filter is clogged in such way that it needs
washing, pull it out from its bed (Fig.), wash it under
hot water and dry. Be sure that the replaced filter
snaps safely to its position, and only then close the
filter lid.
If the filter is not regularly cleaned, the
airflow is obstructed, which causes longer
drying time and danger of overheating.
Cleaning the
condensation dryer
Empty the container and occasionally
clean the water condensation device.
Emptying the water containere
Empty the container after every drying procedure:
pull the container out, pull out the draining nozzle,
pour out the water and replace the container.
Water from condenser tank is not
drinkable! If filtered it may be used for
ironing.
129316
16
Strictly switch the appliance off prior
cleaning (unplug the power cord from the
wall socket, or turn the selector jog to the
position “0”).
• Clean the casing and drum interior with soft cloth
and mild detergent.
Cleaning of evacuation
drier
• Periodically clean (vacuum) the interior of air
Cleaning the water
condensation device
Water condensation device should be cleaned
three to four times a year, in case of very frequent
use even more often.
During cleaning a certain amount of water may
drip out so it is good to put an absorbing cloth
below the opening.
evacuation opening and evacuation tube.
• Open the exterior lid of the condenser by grabbing
•
•
•
•
•
•
129316
•
the handle on the lower left part of the appliance
housing and pull it downwards.
Remove the interior lid by first turning the lever
vertically down, then tilt the lid towards yourself
and remove it.
Turn the lock on the condenser upwards and pull
the condenser out by pulling the lever.
Clean the device from both sides with lukewarm
water and drain it well.
Before replacing it into its slot, clean the air
channel in which the device is mounted, and the
gasket at the interior lid.
Lock the condenser into its place.
Insert the inner lid to seal well and lock it with a
handle.
Push the exterior lid towards the appliance to lock
to its place.
17
After five drying cycles you need to do the
following (condenser appliances only):
• remove, clean/wash and refit the filters on the
interior side of the door and the bottom side of
door opening;
• remove, clean/wash and refit water condenser;
• wipe the inside of the water condenser
compartment with a damp cloth;
• wipe the entire back of the water condenser
housing with a damp cloth (reach deeply into the
condenser compartment with your hand to touch
the back wall of the compartment!);
• wipe all sealings and sealing surfaces of the
condenser, condenser housing and condenser
door with a damp cloth.
129316
18
Troubles
Interferences from the ambient (for example
electrical wiring) could induce signalization of
different faults. In such cases:
- switch the appliance off, and wait for a few
seconds;
- plug in the appliance and repeat the drying
program.
If the fault repeats, call authorized service shop.
Warranty shall not apply in case of failures due to
interferences from the environment (lightning stroke,
power supply circuit faults, natural disasters).
Trouble
Check
Appliance does not
work:
• If there is current in the socket and if the fuse is
functioning.
• If the plug is correctly inserted into the socket.
There is current in the • If the door is closed tightly (press it towards the
socket, but the drum is
appliance).
not rolling:
• If the program runs according to instructions.
• If the container is full (only with condensation
dryer),
• If appropriate drying time is selected.
• If the filter is clean.
• If the condensation device is clean (only with
condensation dryer).
• If the room is adequately ventilated.
• If the amount of laundry to be dried is not too big.
• If the evacuation tube is too long (only with
evacuation dryer - max 2 m).
• If the laundry loaded in the drum has not been
spun enough or if appropriate drying time has been
set.
• If the room is too hot (over 25°C, applies for
condensation dryer).
The condensation is
inadequate:
• If the room temperature is too high.
• If the condensation device is clean.
129316
Laundry is not dry:
19
Unevenly dried
laundry:
• If the amount of laundry to be dried is not too big.
• If there are only large pieces of laundry (large and
small pieces should be dried together).
• If different fabrics are dried together (group the
laundry according to the type of fabrics).
The machine signals errors or failures in operation by flashing signal LED's.
Record number of flashes representing the failure, shut the machine off and
call nearest authoriyed service.
If a failure occurs due to incorrect installation or inappropriate use of the
appliance, the guarantee is void, and the repair bill shall be settled by the
user.
129316
20
Tables
Program chart
Type of
laundry
Extra
functions
6
{
85 98 95/90* 110/100* 105 140 120/110* 130/120*
{
{
75 89 85/80* 100/90*
3,5 dry for storage {
{
7
Lower
tempera-ture
6kg 7kg
dry for storage {
iron dry
Synthetics
Ventilation
{ possible
Drying time (min)
Eva.
Con.
6kg
Eva.
7kg
6kg 7kg
2,5
3
Con.
6kg
7kg
95
110 100/90* 117/105*
35 40 55/50* 60/55*
45
50
65/60*
70/65*
35
40
50/45*
55/50*
40
42
60/55*
65/60*
1000 rpm
3
Delicate
800 rpm
Anti crease off
Level of dryness
Max. load in kg
1200 rpm
6kg 7kg
Cotton
Revolutions per minute
800 rpm
iron dry
{
{
30 35 45/40* 50/45*
dry for storage
z
{
30 35 50/45* 55/50*
ventilation of
dry laundry
-
-
20 min.
z compulsory
* Energy efficiency class B
129316
Note:
Indicated drying time corresponds to the laundry
spun at indicated spin rpm. In case of higher or
lower spin rpm the times are accordingly shorter or
longer.
Drying time is also prolonged in case of excessively
large pieces of laundry.
21
Table of consumption
values
For illustration the chart gives values for 6/7 kg
of testing laundry (measured by the EN61121
standard) on different RPM of final spin in washing
machine (program dry for storage).
Rounds/
min
Drying time
in minutes
evacuacondensation
tion
6 kg 7 kg
6 kg
7 kg
110 130 120/110* 140/120*
92 104 100/100* 117/110*
85
98
95/90* 110/100*
75
89
85/80* 100/90*
68
77
74/70*
88/80*
800
1000
1200
1400
1600
Remaining moisture
L
%
6 kg
4,2
3,4
3,3
3,0
2,6
7 kg
4,9
4,0
3,8
3,5
3,1
70
58
55
50
44
Power consumption
in kWh
evacuacondensation
tion
6 kg 7 kg
6 kg
7 kg
4,0 4,6 4,4/4,1* 5,1/5,0*
3,3 3,8 3,7/3,3* 4,2/3,9*
3,1 3,6 3,4/3,1* 3,9/3,7*
2,8 3,2 3,1/2,9* 3,6/3,4*
2,5 2,9 2,7/2,6* 3,2/3,0*
* Energy efficiency class B
Measured values may differ from the actual ones
due to fluctuations in the type or quantity of laundry,
spinning, power oscillation as well as ambience
temperature and humidity.
Table of textile symbols
Drying
Drying in drier not permitted
Drain, hang on washing line and dry
Do not drain, hang wet and dry
Drain, lay on a flat surface and dry
Machine drying not permitted
Drying at normal temperature
Drying at lower temperature
129316
22
SP PG1 OEM
129316/en (02-08)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising