HubSat4WPiV Passive Outdoor UTP Transceiver Hub with

HubSat4WPiV Passive Outdoor UTP Transceiver Hub with
HubSat4WPiV
Passive Outdoor UTP Transceiver Hub
with Integral Isolated Camera Power
Description
Altronix HubSat4WPiV Passive Outdoor UTP Transceiver Hub with Integral Isolated
Camera Power transmits UTP video, RS422/RS485 data, and power over a single
CAT-5 or higher structured cable. Unit provides 4 camera channels in a weatherproof
enclosure. Video transmission range is up to 228.6m (750 f­t.) max. per channel.
Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix
HubWayAv or HubWayDv Video Balun/Combiners.
Unit also features 24VAC or 28VAC PTC protected outputs and surge suppression.
Optionally, HubSat4WPiV can be used as an accessory module to transmit video from
up to 4 cameras over a single CAT-5 or higher structured cable back to the HubWay,
HubWayLD or HubWayLDH Passive and Active UTP Transceiver Hubs. In addition,
HubSat4WPiV powers these cameras locally to eliminate the possibility of voltage drop
associated with long cable runs.
HubSat4WPiV
Specifications
Input
Voltage
Fusing
220VAC, 50/60Hz, 0.7A.
3.5A/250V.
Outputs
Electronically isolated PTC protected outputs rated 1A per channel.
Voltage
Individually selectable 24VAC or 28VAC
power outputs with OFF position.
Current
Up to 1A max. per channel,
not to exceed a total of 4A maximum current.
Other
Surge suppression.
Video
Four (4) channels of video over twisted pair up to a distance of
228.6m (750 ­ft.) per channel.
Four (4) 75 Ohm video outputs.
Data
RS422/RS485 data inputs.
Indicators (LED)
Outputs Four (4) individual power LED indicators.
Agency Listings
CE European Conformity
Physical and Environmental
Enclosure Dimensions (H x W x D)
12” x 8” x 6” (304.8mm x 203.2mm x 152.4mm).
Product Weight 13.75 lbs. (6.24 kg).
Shipping Weight 15.1 lbs. (6.85 kg).
Temperature
Operating 0ºC to 49ºC (32ºF to 120ºF).
Storage -20ºC to 70ºC (-4ºF to 158ºF).
Relative Humidity
85% +/-5%.
BTU/Hr. (approx.):
24VAC: 49 BTU/Hr.
28VAC: 57 BTU/Hr.
Rev. HubSat4WPiV-11292016
HubSat4WPiV
Passive Outdoor UTP Transceiver Hub
with Integral Camera Power
Accessories
HubWayAv and HubWayAv2
Video Balun/Combiners for use with 24VAC cameras.
HubWayAv
Compatible with all HubWay and HubSat UTP Transceiver Hubs.
Allow for video and data transmission and power over CAT-5 or higher structured cable to
AC fixed cameras or PTZs.
HubWayAv2
HubWayDv
Video Balun/Combiner for use with 12VDC cameras.
Compatible with all HubWay and HubSat UTP Transceiver Hubs.
Allows for video and data transmission and power over CAT-5 or higher structured cable to
12VDC fixed cameras or PTZs.
HubWayDv
HubWayDvi
Video Balun/Combiner for use with 12VDC cameras without isolation.
HubWayDvi
Compatible with all HubWay and HubSat UTP Transceiver Hubs.
Allows for video and data transmission and isolated power over CAT-5 or higher structured cable to
12VDC fixed cameras or PTZs.
PMK1 Pole Mount Kit (order separately)
PMK1 pole mount kit is designed to simplify installation of outdoor units.
It accommodates 2”- 8”(diameter) poles.
Kit includes:
- Two (2) powder coated steel mount brackets.
- Four (4) stainless steel bolts.
- Four (4) stainless steel lock washers.
- Two (2) wormgear quick release straps.
PMK1
Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA
phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising