Netgear | FS752TP-100EUS | Datasheet | Netgear ProSafe FS752TP

ProSafe® 52-port 10/100 Fast Ethernet PoE
Smart Switch with 4 Gigabit Uplink Ports
FS752TP
Data Sheet
Advanced Performance for Power-over-Ethernet Networks
As small and mid-sized enterprises add Voice-over-IP (VoIP) telephones, wireless access points
(APs) and IP-based surveillance cameras to their networks, Power-over-Ethernet (PoE) switches
are becoming the mission-critical centerpiece for advanced deployments. The NETGEAR® ProSafe®
52-port 10/100 Fast Ethernet PoE Smart Switch with 4 Gigabit Uplink Ports (FS752TP) is a
reliable, affordable and simple solution for supporting 48 IEEE 802.3af PoE devices. Four of the
48 ports support PoE Plus devices for high-power needs such as video phones and 802.11n APs.
The ProSafe FS752TP is a smart switch, with intuitive web-based management for quick and easy
set up and configuration. Designed to grow with a business, the switch has a powerful feature
set including Access Control Lists (ACL), static routing, 802.1x port authentication, enhanced
QoS, rate limiting and IGMP snooping. Four dedicated gigabit ports support high-speed uplinks
or fiber connectivity. The switch is also energy efficient, with many power-saving features, and is
protected by the NETGEAR ProSafe limited lifetime warranty.
Flexible, Energy-Efficient PoE
With a generous total power budget of 384 Watts, the ProSafe FS752TP connects up 48 devices
based on IEEE 802.3af – including up to four high-power IEEE 802.3at devices. PoE optimizes
the installation and management of network devices such as VoIP phones, wireless APs and
IP-based surveillance cameras by requiring only a standard Cat 5 UTP cable to carry both
power and data – reducing installation time and cost. The ProSafe FS752TP also comes with a
PoE timer to increase network security and energy efficiency by allowing IT administrators to
remotely turn ports off and on.
Sophisticated Traffic
The ProSafe FS752TP goes beyond basic VLAN and QoS for network traffic management,
with Auto Voice VLAN and Auto Video VLAN. These advanced features automatically detect IP
phones and cameras on the network, put them in a designated voice or video VLAN, and then
assign the proper traffic priorities and security profiles. This plug-and-play approach reduces
initial set up time as well as simplifying ongoing monitoring, maintenance and changes.
Management
Multiple Management
Options
As a “smart” switch, the ProSafe FS752TP offers IT administrators flexibility in network
management. Individual switches can be managed through a simple browser-based graphical
user interface. The ProSafe FS752TP can also be managed through SNMP (v1, 2c and 3) for
compatibility with existing SNMP-based consoles. For larger deployments, NETGEAR’s Smart
Control Center is a free Windows-based application for discovering, configuring and upgrading
multiple smart switches across the network. For networks including other devices from NETGEAR
such as switches, wireless access points and NAS, the NETGEAR Network Management System
(NMS-200) can manage them all from a single console for extensive visibility, granular control
and seamless automation across the entire network.
24 / 7
TECHNICAL
S U P P O R T*
1-888-NETGEAR (638-4327)
Email: info@NETGEAR.com
*
ProSafe ® 52-port 10/100 Fast Ethernet PoE Smart Switch with 4 Gigabit Uplink Ports
FS752TP
Features at a Glance
Hardware Main Features
48 IEEE 802.3af PoE ports
Benefits
• Supports advanced deployments of Voice over IP (VoIP) telephones, wireless access points (APs) and IP-based
surveillance cameras that draw power through an Ethernet connectionReduces installation time and cost
4 IEEE 802.3at PoE Plus ports
• Supports high-power PoE devices such as video phones and wireless N APs.
Four dedicated gigabit ports
• Supports high-speed uplinks or fiber connectivity
Software Main Features
Benefits
• Auto Voice and Auto Video VLAN
• Fast and easy deployment for VoIP and video surveillance systems
Comprehensive QoS features:
• Port-based or 802.1p-based prioritization
• Layer 3-based (DSCP) prioritization
• Port-based ingress and egress rate limiting
• Advanced controls for optimized network performance and better delivery of mission-critical traffics such as voice
and video
Robust security features:
• 802.1x authentication
• DHCP Filtering
• Port-based security by locked MAC
• ACL filtering to permit or deny traffic based on MAC
and IP addresses
• Prevent external attacks and block malware while allowing secure access for authorized users
• Static Routing
• Allows for segmentation of the network with internal routing through the switch – reserving the router for external traffic
routing only, making the entire network more efficient.
• PoE timer
• Allows IT administrators to increase network security and energy efficiency by remotely turning ports off and on
• NETGEAR Network Management System (NMS200)
• Extensive visibility, granular control and seamless automation across the network for a range of NETGEAR products
Network Diagram
SRX5308 ProSafe
Quad WAN Gigabit
SSL VPN Firewall
Internet
FS752TP ProSafe 52-port 10/100
Fast Ethernet PoE Smart Switch with
4 Gigabit Uplink Ports
Servers with
GA311 Gigabit NICs
VIoP Phones
Gigabit Links
IP Camera
Notebook PCs with
WG511T 54 Mbps
Wireless PC Card
Technical Specifications
• Network Protocol and Standards
Compatibility
– IEEE 802.3 10BASE-T
– IEEE 802.3u 100BASE-TX
– IEEE 802.3ab 1000BASE-T
– IEEE 802.3z 1000BASE-X
– IEEE 802.3x full-duplex flow control
– IEEE 802.3af (Power over Ethernet)
– IEEE 802.3at (Power over Ethernet Plus)
for the first 4 ports
Desktop PCs with
FA311 10/100 NICs
WNDAP360
ProSafe Dual Band
Wireless-N Access Point
• Power Supply
– Power consumption: 539W maximum
– 100-240VAC/50-60-Hz universal input
– PoE budget: 384W
• Physical Specifications
– Dimensions: (w x d x h)– 440 x 316 x 43
mm (17.3 x 12.4 x 1.7 in)
– Weight: 4.87 kg (10.74 lb)
• Network Ports
– 48 10/100 Mbps auto sensing Fast
Ethernet
– 4 10/100/1000 Mbps auto-sensing
gigabit Ethernet switching ports (RJ-45)
– 2 Dual Personality SFP slots
• Electromagnetic Emissions
– CE EN 55022, EN 61000 and EN 55024
– FCC Part 15 Class A
– VCCI Class A
– C-Tick
– KC
– CCC
ProSafe ® 52-port 10/100 Fast Ethernet PoE Smart Switch with 4 Gigabit Uplink Ports
• Environmental Specifications
– Operating temperature: 32° to 122° F –
(0° to 50° C)
– Storage temperature: -4° to 158° F – (-20°
to 70° C)
– Operating humidity: 90% maximum –
relative humidity, non-condensing
– Storage humidity: 95% maximum –
relative humidity, non-condensing
– Operating altitude: 10,000 ft – (3,000 m)
maximum
– Storage altitude: 10,000 ft – (3,000 m)
maximum
• LEDs
– Per port (10/100 and Gigabit): – Link/
activity, speed
– Per device: Power, Fan, PoE Max, LED
Mode
– Per PoE port: PoE Power, PoE fault
• Safety
– UL/cUL 60950-1
– CE EN 60950-1
– CCC
– CB
• System Requirements
– Category 5 UTP Network cables or above
– Network card for each PC
– Network software (e.g., Windows®)
– Web browser (e.g., Internet Explorer – 6.0
or higher, Netscape 6.0 or higher)
• Administrative Switch Management
– IEEE 802.1Q static VLAN – (128 groups,
static)
– IEEE 802.1p Class of Service (CoS)
– Port-based QoS
– DSCP-based QoS
– DiffServ
– IEEE802.3ad link aggregation – (manual
or LACP)
– IEEE 802.1D Spanning Tree – Protocol (STP)
– IEEE 802.1w Rapid Spanning – Tree
Protocol (RSTP)
– IEEE 802.1s Multiple Spanning – Tree
Protocol (MSTP)
– IEEE 802.1ab Link Layer Discovery –
Protocol (LLDP)
– LLDP-MED
– SNMP v1, v2c, v3
– RFC 1213 MIB II
– RFC 1643 Ethernet interface MIB
– RFC 1493 bridge MIB
– RMON group 1, 2, 3, 9
– RFC 2131 DHCP client
– Voice VLAN
– Auto-VOIP
– DHCP Filtering
– Auto denial-of-service (DoS) protection
– HTTP and HTTPS
– Ping and traceroute
– Power saving when link down
– IEEE 802.1x
– Port-based security by locked – MAC
addresses
– IP and MAC ACL
– Storm control for broadcast, multicast and
unknown unicast packets
– IGMP snooping v1/v2/v3
– Protected Port
– PoE Timer
– Port-based ingress and egress rate –
limiting
– SNTP
– Port mirroring support (many to one)
– Static Routing (support for up to 10 static
routes)
– Web-based configuration
– Configuration backup/restore
– Password access control
– RADIUS Support
– TACACS+ support
– Syslog
– Firmware upgradeable
– Cable test
FS752TP
• Performance Specifications
– Forwarding modes: Store-and-forward
– Bandwidth: 17.6 Gbps
– Network latency: <20µs for 64-byte –
frames in store-and-forward mode for
100 Mbps to 100 Mbps transmission
– Buffer memory: 1.5 MBytes per system
– Address database size: 4,000 media
access control (MAC) addresses per
system
– Addressing: 48-bit MAC address
– Mean time between failures (MTBF):
230,731 hours at 25C (~26.4 years)
– Acoustic noise: 34.5 dBA
Modules
–
–
–
–
AGM731F 1000BASE-SX SFP Module
AGM732F 1000BASE-LX SFP Module
AGM733 1000BASE-ZX SFP Module
AFM735 100BASE--FX SFP LC Module
Warranty
– NETGEAR Lifetime Warranty
OnCall 24x7, Category 1
– PMB0331-100 (US)
– PMB0331 (non-US)
Package Contents
– 52-port PoE Smart Switch with 4 Gigabit
Ports (FS752TP)
– Rubber footpads
– Power cord
– Rack-mount kit
– Resource CD
– Installation guide
Ordering Information
– North America: FS752TP-100NAS
– Europe: FS752TP-100EUS
– Asia & Japan: FS752TP-100AJS
© 2011 NETGEAR, Inc. NETGEAR, the NETGEAR Logo, Connect with Innovation, PowerShift, and ProSafe are trademarks of NETGEAR,
Inc. in the United States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be
trademarks of their respective holder(s). Information is subject to change without notice. All rights reserved.
350 E. Plumeria Drive
San Jose, CA 95134-1911 USA
1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR.com
www.NETGEAR.com
*Basic technical support provided for 90 days from date of purchase.
D-FS752TP-00
Download PDF

advertising