OWNER’S MANUAL

XTR-500

Total Band Protection

™

LASER-RADAR

DETECTOR

The Whistler Group Corporate Headquarters

13016 N. Walton Blvd. • Bentonville, AR 72712

Tel 479.273.6012 • Fax 479.273.2927

Customer Return Center

1201 N. Dixieland Rd. • Rogers, AR 72756

Customer Service Tel 800.531.0004

www.whistlergroup.com

P/N 260012, © 2007 The Whistler Group, Inc.

Dear Whistler Owner,

If you have questions concerning the operation of this Whistler product please call:

C

uSTOmer

S

eRVICE

1-800-531-0004

Monday - Friday • 8:00 am - 5:00 pm CT

or visit our website www.whistlergroup.com

Please keep the receipt in a safe place.

You may register your product online at www.whistlergroup.com. For warranty verification purposes, a copy of your dated storereceipt must still accompany any unit sent in for warranty work. If the unit is returned without a dated storereceipt, an out of warranty service charge applies.

INTRODUCTION

Note: Your warranty period begins at the time of purchase. The warranty is validated only by the dated store receipt!

Please record the serial num-

To fully acquaint yourself with the operation of your Whistler detector and to better understand the differences between detecting radar, laser and safety radar signals, we recommend reading this entire manual or visiting our FAQ page on our website www.whistlergroup.com

Enjoy your Whistler detector and please drive safely.

Sincerely,

The Whistler Group, Inc.

Model Features Summary ................................. 3 - 5

Installation ........................................................ 5 - 6

5 - 6

6

• Power Connection and Fuse Replacement

6

Operation ....................................................... 7 - 13

7

7

• Setting Saver 7

7

• Integrated Real Voice ®

8

9

8

8

9

10

• Dual LED Alert Periscope 10

11

11

• Option Select Mode 12

13

Safety Warning System ™

POP ™

..................................... 13

Mode Alerts .............................................. 14

• Speed Radar Audio/Visual Alerts 14

14

• Pulse Protection ® 14

VG-2 Alerts ......................................................... 15

• Alert Priority

15

Reset Features .................................................... 16

Troubleshooting Guide ....................................... 17

Care and Maintenance ........................................ 18

Are Detectors Legal? .......................................... 18

FCC Information .................................................. 19

Speed Monitoring ......................................... 19 - 22

19

• POP ™ Mode 19

• Other Speed Detection Systems

20

21

Warranty Information .................................... 22 - 25

Specifications ......................................................25

Accessories ......................................................... 26

WHISTLER FEATURES

Feature Listings of XTR-500

13

1

6

9

10

8

2

11

7

4

3

5

12

Features of XTR-500

• Total Band Protection ™

• Red Text Display

• Detects POP ™ Mode

• 360° Protection

• Real Voice ®

• VG-2 Cloaking

• 3 City Modes

• Quiet/Auto Quiet Mode

• Dim/Dark Mode

• Stay Alert ™

• Setting Saver

• Vehicle Battery Saver ™

• Safety Warning System ™

• Alert Priority

• Dual LED Periscopes

3

FEATURE DESCRIPTIONS

Whistler’s ergonomic and user-friendly design provides a new level of operating convenience.

Special features include:

1. Bracket Release Button – provides quick and easy release of the mounting bracket.

– provides distinct audio warnings for X, K, Ka band radar, safety radar, laser and

VG-2.

3. Mounting Bracket Location – slot holds mounting bracket firmly.

4. Radar Antenna – compact, high-efficiency antenna receives radar signals.

5. Front Laser – high gain optical lens provides increased sensitivity and field of view for leading-edge laser detection.

6. Rear Laser – an integrated optical waveguide provides superior detection of laser signals transmitted from behind.

7. City Button - reduces the annoyance of false alerts typically encountered in urban driving areas.

8. Quiet Button - pressing QUIET before a radar signal is detected engages Auto Quiet

Mode which provides “clicking” sounds after the initial warning. Pressing QUIET during a radar encounter silences audio alerts, while allowing visual alerts to keep you informed.

9. Power / Volume Control – turns unit on/off and adjusts audio level.

10. Dim Dark - engages Dim/Dark modes

11. Menu Button - enters Option Select Mode.

12. Text Display – provides distinct visual confirmation of signals detected, signal strength, and indicates engaged modes of operation.

4

FEATURE DESCRIPTIONS

13. Dual Alert LED Periscope - provides added visual alerts of threats ahead.

INSTALLATION

Mounting Guidelines

• Mount the unit as low as possible near the center of the windshield.

• Do not mount the unit behind wipers, ornaments, mirrored sunscreens, etc. These obstructions have metal surfaces which can affect radar and laser signals and reduce critical warning time. (Regular tinted glass does not affect reception).

• Some windshields have an Instaclear ™ or

Electriclear ™ type coating, which affect radar signals. Consult your dealer or the owner’s manual supplied with your vehicle to determine if your windshield has this coating.

• Avoid placing the unit in direct contact with the windshield.

• To reduce the possibility of theft, conceal your unit when not in use.

IIM PO TA

Windshield

Mounting

5

Rubber Bumper

INSTALLATION CONT.

Windshield Mounting

• Install the two suction cups and rubber bumper onto the bracket by fitting them into their holes.

• Press the suction cups onto the windshield at the location you have chosen.

Important: Some newer cars have a plastic safety coating on the inside of the windshield. The windshield bracket may leave permanent marks on this type of surface. To find out if your vehicle has this type of windshield, check the owner’s manual or ask your dealer. We recommend that you do not leave the suction cup bracket on the window in direct sunlight. If the detector is removed, this may cause blistering of the dash in some vehicles.

• Slide the detector onto the bracket until it locks into place.

• If necessary, the unit may be leveled by bending the windshield bracket. Press the bracket release button and remove the detector before bending.

Power Cord Connection

• Plug the small end of the power cord into the unit’s power jack.

• Plug the large end into the vehicle’s cigarette lighter.

N otte installing the cord, expect some resistance.

Fuse Replacement

The lighter socket plug is equipped with a replaceable 2 amp 3AG fuse located behind the silver tip. To replace the fuse, carefully unscrew the tip of the plug.

IIm po ntt:: Unscrew slowly. The tip contains a spring which may fly out when disassembling.

Insert the new fuse with the spring and screw on the tip. With use, screw cap on plug may loosen.

Retighten occasionally.

OPERATION

Dim/Dark Mode

Dim/Dark Mode reduces the illumination of the display.

• Press the Dark button to reduce illumination to a Dim setting.

• Pressing the Dark button a second time engages Dark Mode. The display illumination is further reduced.

Dim or Dark Mode can be engaged during an alert. In Dark Mode, the display goes dark for as long as a signal is being detected and for 20 seconds after, then the display returns to the dimmer setting.

• Pressing the Dark button a third time restores full illumination to the display.

Power On Self Test & Volume

Each time your Whistler detector is turned on, an automatic self-test sequence confirms that the speaker and visual displays are functional.

To increase volume, continue turning the volume knob.

• Display shows in order:

1. WHISTLER 2. X-band 3. K-band 4. Ka-band

5. LASER 6.. SR OFF 7. VG2 OFF 8. POP ON

9. B SVR ON 10. HIGHWAY

Setting Saver

Setting Saver saves your personalized settings so that when the detector is turned off and then on again, you do not have to re-enter them.

Feature Engaged Confirmation

Each time a button is pressed, one beep confirms feature “on”, two beeps confirm feature “off”.

6 7

OPERATION

Integrated Real Voice

®

When selected, Real Voice ® late the following: will be used to articu-

1. Band Identification

2. Safety Warning System messages

3. Feature Selection

Note: In certain cases the voice message does not replicate the text message.

Auto Quiet Mode

Pressing QUIET before a radar signal is detected provides an alternate alert pattern, consisting of four beeps (indicating X, K, Ka or Safety Radar) followed by clicking. The clicking will continue for as long as the detected signal is present or any new signal is detected within 20 seconds, becoming more rapid as the strength of the signal increases.

• Press Quiet (before a signal is detected) to engage Auto Quiet.

• Once the Auto Quiet mode is engaged, you may cancel the audio alarm by pressing Quiet.

• Press Quiet (when the unit is not alarming) to cancel Auto Quiet mode.

Quiet Mode

Quiet cancels audio during an alert and any new alert within 20 seconds. After 20 seconds, approximately 2 beeps are provided on any new alert and unit then remains quiet.

• Press Quiet to cancel the audio.

• Press Quiet a second time during an alert to restore the standard audio alert pattern; or turn the unit off, then on.

OPERATION

City/City 1/City 2 Mode

Whistler’s Three Stage City Mode is designed to reduce the annoyance of automatic door openers, intrusion alarms and other devices which share frequencies with police radar. Generally, X band is used for these devices.

• Press City button to cancel Highway Mode and engage City Mode.

• Press City button again to enter City 1 Mode

• Press City button again to enter City 2 Mode

• Pressing City button a fourth time cancels City 2

Mode and returns the unit to Highway Mode.

In City Mode, weak speed/safety radar signals give an initial alarm of two beeps, and then remains quiet unless the signal becomes very strong. When the signal strength increases, two additional beeps are provided. City 1 and City 2

Modes operate the same as Highway Mode, but in City 1 Mode, only the X band sensitivity is lowered. In City 2 Mode, X-band is not detected.

Caution: Some towns/small cities may still be using X band radar. City Modes do not change the audio alert for laser or VG-2.

Highway Mode

Highway mode provides full audio warnings any time radar (X, K, Ka, Safety Radar) or laser signals are detected, and is recommended for open road driving.

For more information on City and Highway modes, please visit our F.A.Q. page on our website: www.whistlergroup.com

OPERATION

Teach/Tutorial Mode

Provides simulated alerts for each type of signal.

• Press City and Quiet buttons simultaneously

• Display Shows:

• Press Dark button to exit.

Dual LED Alert Periscope

Whistler’s new Dual LED Alert Periscope provides an added attention getting visual alert. The two extra LED’s flash on and off when the unit alarms to provide a unique visual alert. This alert can be programmed, through the Option Select Mode to:

1. flash for all alarms, 2. remain on, or 3. turn LEDs off completely.

8 9 10

OPERATION

VG-2 Mode

See Option Select Mode to turn this feature on/off. When a VG-2 signal is detected, the VG-2 is sounded and the display flashes “VG-2”. After

3 seconds the audio is canceled and the display no longer flashes. This cycle is repeated if the

VG-2 signal is again detected.

During the period a VG-2 signal is detected, a radar signal cannot be detected. However, because the VG-2 alert has confirmed that a patrol car is nearby, you are already aware of the potential for speed monitoring and can adjust your speed accordingly. Laser detection is not affected while a VG-2 signal is detected. (See page 15 for more information)

Vehicle Battery Saver Mode

The Vehicle Battery Saver Mode automatically shuts off your detector after 3 hours. The timer is reset if the detector is turned off, unplugged or any button is pressed before the timer has expired. The detector will alert you with an audible and visual warning before it shuts off.

During this warning, you can momentarily reset the timer by pressing any button. If the unit has automatically turned itself off, press any button to turn the unit back on.

Refer to “Option Select Mode” for instructions for deactivating battery saver mode feature.

OPERATION

Option Select Mode

Entering Option Select Mode allows you to customize options such as Tone Select, Abbreviated Power Up

Sequence and VG-2 Mode. Press the Menu button to enter

Option Select Mode. When selecting options, the Dark or

Quiet buttons must be pressed within 20 seconds or Option

Select Mode will automatically be exited. To enter:

Press and hold Menu button to exit Option Select Mode.

OPERATION

Stay Alert Feature

The Stay Alert Feature is designed to test a driver’s alertness. To engage (when the unit is not alarming) :

• Press and hold the City button for approximately 2 seconds. Release the button during or immediately after the alert is given. Display shows:

Within 30-60 seconds, two beeps are sounded; to show alertness, the driver must press either the

City, Menu, or Quiet buttons within 3-5 seconds. If a button is pressed within 3-5 seconds, the cycle is repeated.

If a button is not pressed within 3-5 seconds, an alarm sounds and the display shows:

• Press the Dark button to exit the Stay Alert feature.

WARNING!!! Stay Alert is NOT intended as a substitute for adequate rest. You should NOT operate a vehicle if you are drowsy. During extended periods of vehicle operation, you should take frequent breaks. Improper reliance on the Stay Alert feature may result in vehicle damage, personal injury or death. NEVER OPERATE A VEHICLE IF

YOU ARE DROWSY.

SWS

™

Safety Warning System ™

In communities where transmitters are located, the Safety Warning System ™ displays over 60 text messages. When Safety Radar is detected the audio alert is geiger counter-like.

Safety Warning System Text

Example: Poor - Road - Surface.

Note: Not all areas have Safety Warning System ™ transmitters.

11 12 13

POP

™

MODE ALERTS

POP

™

Mode Alerts

Because POP ™ Mode radar utilizes the same

K or Ka band frequencies, POP ™ displayed as regular radar alerts.

Mode Alerts will be

LASER/RADAR ALERTS

Speed Radar Audio/Visual Alerts

When X, K or Ka is detected, the band ID and signal strength is displayed. The audio alert is continuous and has a geiger counter-like pattern. The faster the beep, the closer or stronger the radar source.

Laser Audio/Visual Alerts

When a laser signal is detected the audio alert is continuous for a minimum of 3 seconds.

• The Displays Shows:

Pulse Protection

®

Pulse (or instant-on) radar is more difficult to detect than conventional radar because it remains ‘off’ until activated to measure the speed of a targeted vehicle.

When a pulse type transmission is detected, your

Whistler detector sounds an urgent 3-second audio warning and the display shows:

VG-2 ALERTS

VG-2 Audio/Visual Alerts

Note: You must turn this feature on before it will detect VG-2.

When a VG-2 signal is detected, the detector “hides” its own radiated signal and becomes undetectable by the VG-2.

Every 30 seconds, the detector checks for a VG-2 signal. If a VG-2 signal is still present, the unit continues to hide and repeats the VG-2 alert. If no signal is detected, two beeps are provided, indicating an “all clear” condition. During a VG-2

Alert X, K, and Ka band signals cannot be received (Reference page 21 for VG-2 information).

Alert Priority

When two or more signals are received at the same time, the alert priority is:

1. Laser

2. VG-2

3. Speed Radar

4. Safety Radar

Example:

If X band is alerting, then suddenly a VG-2 signal is detected, the VG-2 warning will override the X band alert.

RESET FEATURES

Reset Features

All user features can be reset to factory settings.

•Unplug the Power Cord from the unit.

•Press and hold the Quiet button.

•Plug the Power Cord into the unit.

•Wait for 2 beeps.

•Release the Quiet button.

Unit is now reset to the following features and settings.

Default factory settings are:

1.

HIGHWAY Mode.

2.

Dim/Dark Mode to full illumination of display.

3.

Auto Quiet Mode OFF.

4.

VG-2 Detection Mode OFF.

5.

Safety Radar OFF.

6.

Vehicle Battery Saver ON.

7.

Full Power Up sequence.

8.

Default TONE 3.

9.

POP ON.

10. Voice ON.

11. LED Periscope to BLINK

After the 3-second pulse alert, the standard alert pattern continues for as long as the signal is present.

It is important to respond promptly to a pulse alert, since warning time may be minimal.

14 15 16

TROUBLESHOOTING

Your Whistler detector is expertly engineered and designed to exacting quality standards to provide you with reliable, trouble-free operation.

If your unit has been correctly installed following the guidelines in this manual, but is not operating optimally, please refer to the troubleshooting guide below.

PROBLEM: No display or audio.

• Check fuse in plug; replace if necessary with a

2 amp 3AG type.

• Check fuse for lighter socket; replace if necessary.

• Make sure lighter socket is clean.

PROBLEM: Unit alarms when vehicle hits bumps.

• Check for loose lighter socket; tighten and clean.

• Check connections at both ends of power cord. Substitute another cord to determine if cord is defective. Return defective cord to the factory.

PROBLEM: Audio alerts are not loud enough.

• Cancel Auto Quiet Mode or City Mode.

• Check audio level setting (see page 8 ).

If difficulties occur which cannot be solved by information in this Troubleshooting Guide, please call Whistler Customer Service at 1-800-531-0004 or visit our FAQ page at www.whistlergroup.com/faq-detectors.asp, before returning your unit for service.

CARE AND MAINTENANCE

Care And Maintenance

During the summer months, avoid prolonged exposure to direct sunlight by removing your unit from the dash when your vehicle is parked for an extended period of time. Do not spray water, cleaners, or polishes directly onto the unit. The spray may penetrate through the openings and damage the unit. Also, do not use any abrasive cleaners on the unit’s exterior.

ARE DETECTORS LEGAL?

In Most States YES!

Laser-Radar detectors are legal in every state

(with the exception of Virginia and Washington,

D.C., which have local regulations restricting the use of radar receivers in any vehicle) when used in automobiles or light trucks (under 10,000 lbs.).

Concerning trucks over 10,000 lbs., the Federal

Highway Administration (FHWA) issued a regulation, effective January, 1994 which prohibits radar and laser detector use in these types of vehicles nationally. Prior to the FHWA regulation, laws existed in the state of New York restricting the use of radar detectors in trucks over 18,000 lbs. and in Illinois in trucks over 26,000 lbs.

FCC INFORMATION

FCC ID : HSXWH10

FCC ID : HSXWH21

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two conditions:

(1) This device many not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Important: FCC requirements state that changes or modifications not expressly approved by Whistler could void the user’s authority to operate the equipment.

SPEED MONITORING

Radar Facts

A radar gun operates by transmitting radio waves at certain frequencies which reflect off objects and are picked up by the radar gun’s receiving section. When a radar beam reflects off a moving target, a measurable frequency shift occurs. The radar unit converts this shift into miles per hour to determine your vehicle’s speed.

Currently, the FCC (Federal Communications

Commission) permits operation of traffic radar guns at X Band (10.500 - 10.550 GHz), K Band

(24.050 - 24.250 GHz), and Ka Band (33.400 -

36.000 GHz).

Note: A radar detector will only alarm if an officer is transmitting on any one of the above radar bands.

17 18 19

SPEED MONITORING

POP™ Mode

POP ™ Mode is a feature on some newer radar guns operating on K and Ka bands. When the gun

™ is in POP Mode and activated, a brief burst of energy, less that 1/15 of a second, is transmitted and the vehicle’s speed is quickly acquired. A detector without POP ™ Mode detection capability cannot respond to this brief transmission.

Laser Facts

It’s well documented that many radar guns cannot reliably provide the speed of a targeted vehicle that is traveling in a group of vehicles. In contrast, a laser gun can target a specific vehicle out of a line of traffic and determine its speed. The advantage of laser over radar in terms of target identification is the result of the laser gun’s narrow beam. A radar gun’s transmission can cover more than a four-lane highway at a distance of 1,000 feet, compared with a laser gun’s transmission which covers about 3 feet at the same distance. For best protection, keep these points in mind:

• Because the vehicle’s license plate or headlights are the laser gun’s primary targets, mounting the Whistler detector on the dashboard can improve laser detection at short range.

• Do not follow closely behind any vehicle you cannot see through. If you can’t see past a vehicle ahead of you, chances are your detector can’t either.

• The receiving range of your laser detector will not be the same as a radar detector. Laser guns are most often used at short range.

Whistler Laser-Radar detectors receive all current laser guns which operate at a laser wavelength of 905

+/- 10nm.

Pro Laser ™ I II III •LT1 20-20 •Ultra Lyte

20

SPEED MONITORING

Laser Tips

If you are the targeted vehicle, a laser gun can often determine your speed within a few seconds after you receive an alert. In this situation, there is generally no time to safely adjust your speed. However, if you are traveling near or behind the targeted vehicle and receive an alert, response time should be sufficient. Any laser alert, regardless of duration, requires immediate action!

Other Speed Detection Systems

Several techniques other than radar or laser are used to measure vehicle speeds. When these methods are being used, no detector can provide a warning. These techniques include:

• P acciin g - A patrol car drives behind you and matches your driving speed.

• V asscca afftt - The time it takes a vehicle to travel a known distance is measured.

Radar Detector Detectors: VG-2,

Spectre

The Interceptor VG-2 or simply VG-2, is one type of microwave receiver used by Police to detect signals radiated by the local oscillator of a radar detector.

Because its purpose is to identify persons driving with radar detectors, these devices are known as a

“radar detector detector” (RDD).

An RDD is the primary tool used by the police to identify radar detector equipped vehicles. If caught in a state or country where detectors are illegal (see page 18), drivers risk losing their radar detector and receiving a fine. In addition, instant-on radar is almost always used in combination with an RDD, leaving unsuspecting motorists vulnerable to receive two tickets - one potential for speeding, and the other for possession of a detector.

21

SPEED MONITORING

Note: Having a radar detector capable of detecting the VG-2 may alert you to the presence of a speed trap. The newest tool

Police have to detect radar detectors is called Spectre. Spectre can detect the majority of undetectable (VG-2) laser/radar detectors on the market.

It is the responsibility of the individual radar detector owner to know and understand the laws in your area regarding the legality of the use of radar detectors.

WARRANTY INFORMATION

Consumer Warranty

This Whistler Laser-Radar detector is warranted to the original purchaser for a period of one year from the date of original purchase against all defects in materials and workmanship. This limited warranty is void if the unit is abused, modified, installed improperly, or if the housing and/or serial numbers have been removed.

There are no express warranties covering this product other than those set forth in this warranty. All express or implied warranties for this product are limited to the above time. Whistler is not liable for damages arising from the use, misuse, or operation of this product.

22

WARRANTY INFORMATION

Service Under Warranty

During the warranty period, defective units will be repaired without charge to the purchaser when returned with a dated store receipt to the address below. Units returned without a dated store receipt will be handled as described in section

“Service Out Of Warranty.”

Due to the specialized equipment necessary for testing a Laser-Radar receiver, there are no authorized service stations for Whistler brand detectors other than Whistler.

When returning a unit for service, please follow these instructions:

1.

Ship the unit in the original carton or in a suitable sturdy equivalent, fully insured, with return receipt requested to:

Whistler Repair Dept.

1201 North Dixieland Rd

Rogers, AR. 72756

Please allow 3 weeks turnaround time.

Important: Whistler will not assume responsibility for loss or damage incurred in shipping.

Therefore, please ship your unit insured with return receipt requested. CODs will not be accepted!

2.

Include with your unit the following information, clearly printed:

• Your name and street address (for

shipping via UPS), a daytime telephone number and an email address, if applicable.

• A detailed description of the problem (e.g.,

“Unit performs self-test but does not respond

` to radar”).

• A copy of your dated store receipt or bill of sale.

23

WARRANTY INFORMATION

3.

Be certain your unit is returned with its serial number. For reference, please write your unit’s serial number in the following space: s/n______________.

Units without serial numbers are not covered under warranty .

Important: To validate that your unit is within the warranty period, make sure you keep a copy of your dated store receipt. You may register your warranty online at www.whistlergroup.com, however, for warranty verification purposes, a copy of your dated store receipt must accompany any unit sent in for warranty work.

Service Out of Warranty

Units will be repaired at “out of warranty” service rates when:

• The unit’s original warranty has expired.

• A dated store receipt is not supplied.

• The unit has been returned without its serial number.

• The unit has been abused, modified, installed improperly, or had its housing removed.

The minimum out of warranty service fee for your Whistler detector is $55.00 (U.S.). If you require out of warranty service, please return your unit as outlined in the section “Service

Under Warranty” along with a certified check or money order for $55.00. Payment may also be made by MasterCard, VISA or American

Express; personal checks are not accepted.

In the event repairs cannot be covered by the minimum $55.00 service fee, you will be contacted by a Whistler technical service specialist who will outline options available to you.

If you elect not to have your unit repaired, it will be returned to you along with your certified check or money order.

24

WARRANTY INFORMATION

Important: When returning your unit for service, be certain to include a daytime telephone number and an email address (if applicable).

Customer Service

If you have questions concerning the operation of your

Whistler detector, or require service during or after the warranty period, please call Customer Service at:

1-800-531-0004

Representatives are available to answer your questions

Monday - Friday from 8:00 a.m. to 5:00 p.m. (CT) or visit the FAQ’s at www.whistlergroup.com.

SPECI FIC ATIONS

Radar Frequencies:

10.500 - 10.550 GHz (X Band)

24.050 - 24.250 GHz (K Band )

33.400 - 36.000 GHz (Ka Superwideband)

Operating Temperature Range:-20˚ C to +80˚ C

(-4˚ F to +176˚ F)

Power Requirements:

Operational 12 to 15 volts DC, 250mA nominal

Vehicle Battery Saver, 30mA nominal.

One or more U.S. patents may apply:

#5,146,227, #5,379,456, #5,666,120, #5,990,821

POP ™ Mode is a trademark of MPH Industries, Inc.

SWS ™ is a trademark of Safety Warning System L.C.

Specifications are subject to change without notice.

25

ACCESSORIES

These and other accessories can be ordered directly from Whistler by calling

1-800-531-0004 or visiting our online store at www.

whistlergroup .com

Orrd err #

500501

202151

206552

206553

206880

206666

159032

402081

206660

206661

pttiio n

Zipped Travel Case $ 9.95

Windshield Bracket Kit $9.95

Straight Power Cord (5’) $14.95

Coiled Power Cord (7’) $15.95

Hardwire Kit (10' ) $9.95

(for wiring to fuse box)

Modular* Cord Package $17.95

(includes coiled and straight cords, and power adapter)

Package of 8 Suction Cups $2.95

Non Skid Dash Pad $6.95

Straight Modular Cord &

Socket Multiplier $11.95

Coiled Modular Cord &

Socket Multiplier $12.95

* Modular: Interconnecting pieces cord and plug.

S hiip g a nd an dlliin g ((p orrd err)) $ 5..0

0 .. P e ssu bjje o cch an wiitth utt n e..

26