PS-12180 12 Volt 18.0 AH - Sealed Performance Batteries
PS-12180 12 Volt 18.0 AH
Features
• Absorbent Glass Mat (AGM) technology for superior
performance
• Valve regulated, spill proof construction allows safe
operation in any position
• Power/volume ratio yielding unrivaled energy density
• Rugged impact resistant ABS case and cover (UL94-HB)
• Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and
C.A.B. certified
• U.L. recognized under file number MH 20845
Terminals
Performance Specifications
(mm)
3.4
• PS-12180 F2: Quick
disconnect AMP, INC.
Faston tabs,
0.250” x 0.032”
Nominal Voltage ........................................................................ 12 volts (6 cells)
6.35
20-hr. (900mA to 10.50 volts) ....................................................... 18.0 AH
7.95
• PS-12180 NB2: Tin
plated brass post
with 5mm nut & bolt
connectors
0.8
14
4.5
Nominal Capacity
2
6
12
10-hr.
(1.7A to 10.50 volts) ............................................................. 17.0 AH
5-hr.
(3.2A to 10.20 volts) ............................................................ 16.0 AH
1-hr.
(11.1A to 9.00 volts) ............................................................. 11.1 AH
15-min. (34.3A to 9.00 volts) .............................................................. 8.58 AH
Physical Dimensions: in (mm)
Approximate Weight ........................................................ 12.60 lbs. (5.72 kg)
Energy Density (20-hr. rate) ................................. 1.53 W-h/in3 (93.51 W-h/l)
Specific Energy (20-hr. rate) ............................... 17.14 W-h/lb (37.79 W-h/kg)
W
Internal Resistance (approx.) ...................................................... 14 milliohms
Max Discharge Current (7 Min.) ............................................... 54.0 amperes
Max Short-Duration Discharge Current (10 Sec.)................ 180.0 amperes
Shelf Life (% of nominal capacity at 68°F (20°C))
1 Month ...................................................................................................... 97%
Sealed Rechargeable
Battery
HT
H
MODEL PS-12180 NB
®
Pb
C
MH20845
www.pow er-sonic.com
3 Months..................................................................................................... 91%
6 Months .................................................................................................... 83%
12 Volt 18.0 Amp. Hr.
NONSPILLABLE
L
Operating Temperature Range
Charge.. ........................................................... -4°F (-20°C) to 122°F (50°C)
Discharge ....................................................... -40°F (-40°C) to 140°F (60°C)
L: 7.13 (181) W: 3.00 (76) H: 6.59 (167) HT: 6.59 (167)
Case ...................................................................................................... ABS Plastic
Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for
height dimensions. All data subject to change without notice.
Power-Sonic Chargers ....PSC-122000A, 124000A, 122000A-C, 124000A-C
To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.
All data subject to change without notice.
www.sealedperformance.com.au
PS-12180 12 Volt 18.0 AH
®
Discharge Characteristics
100
Charging is not
necessary unless
100% of capacity
is required.
80
Charging before
use is necessary
to help recover
full capacity.
5oC
(41oF)
60
o
30 C
o
(86 F)
40oC
o
(104 F)
40
0
14.0
0
2
4
6
8
10
Charge may fail
to restore full
capacity. Do not
let batteries reach
this state.
20oC
(68oF)
12
14
16
18
o
o
Ambient Temperature 20 C (68 F)
13.0
Terminal Voltage (V)
Capacity Retention Ratio (%)
Shelf Life & Storage
12.0
11.0
10.0
Final
Voltage
20
8.0
18
36
1.2
Discharge Time vs. Discharge Current
0.90
9.0
9.0
Standing Period (Months)
1.8
3.6
2.4
6
12
24 36 48 1
2
min
4 6 8 10
20 4 0
h
Discharge Time
Life Characteristics in Stand-By Use
Discharge Time
5
Retention Capacity (%)
h
20
15
10
Final
Voltage
10.5V
2
10.2V
1
9.6V
min
30
9.0V
o
Ambient Temperature 20˚C (68˚F)
100
80
60
Float Charging Voltage
2.25 - 2.30 V/Cell
40
20
0
o
0
1
2
40 C (104 F)
o
o
20 C (68 F)
o
o
0 C (32 F)
10
5
3
4
Years
8.1V
Life Characteristics in Cyclic Use
0.90
1.8
3.6
9.0
18
36
120
Discharge Current (A)
Charging
Cycle Applications: Limit initial current to 5.4A. Charge until battery voltage
(under charge) reaches 14.4 to 14.7 volts at 68°F (20°C). Hold at 14.4 to 14.7
volts until current drops to under 180mA. Battery is fully charged under these
conditions, and charger should be disconnected or switched to “float” voltage.
“Float” or “Stand-By” Service: Hold battery across constant voltage source of
13.5 to 13.8 volts continuously. When held at this voltage, the battery will seek its
own current level and maintain itself in a fully charged condition.
Note: Due to the self-discharge characteristics of this type of battery, it is
imperative that they be charged within 6 months of storage, otherwise permanent
loss of capacity might occur as a result of sulfation.
Chargers
Retention Capacity (%)
100
80
60
Discharge
Depth 100%
Discharge
Depth 50%
Discharge
Depth 30%
40
1. Discharge Current 0.2C (Final Voltage 1.7V/Cell)
2. Charge Current: 0.1C
3. Ambient Temperature: 20oC to 25oC (68oF to 77oF)
20
0
0
200
400
600
800
1000
1200
Number of Cycles
Further Information
Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH.
Please refer to the Charger Selection Guide in our specification sheets for “C-Series
Switch Mode Chargers” and “Transformer Type A and F Series”. Please contact our
Technical department for advice if you have difficulty in locating suitable models.
Please refer to our website www.power-sonic.com for a complete range of useful
downloads, such as product catalogs, material safety data sheets (MSDS), ISO
certification, etc..
Contact Information
DOMESTIC SALES
Tel: (07) 3386 1102
Fax: (07) 3102 9913
sales@spb.net.au
www.sealedperformance.com.au
1 Ant Road, Yatala
Brisbane QLD 4207
Brisbane, QLD 4207
© 2015. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.
0810 1M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising