d4 touch panel | d series

d4 touch panel | d series
INSTALLATION GUIDE
D4 TOUCH PANEL | D SERIES
1. INSTALLATION INSTRUCTIONS
Install
CODE
Uninstall
No wall flush box supplied/required. Units come with a
mounting plate, simply screw it through the wall and cut
out a hole in the centre
BL-PC-D4
2. KEY FUNCTIONS
INPUT VOLTS
12-24V DC
LOAD
CURRENT
4A×4CH Max 16A
MAX OUTPUT
POWER
12V DC - 192W
24V DC - 384W
DIMENSIONS
W86 x L86 x D36mm
OPERATING
TEMP.
-30°C ~ +55°C
WEIGHT
208g
INGRESS
PROTECTION
Indoor use only
WARRANTY
5 years
3. GREEN BLOCK
Power Input Socket
LED Lamp Connected Socket
4. WIRING DIAGRAM
Speed / Brightness -/+
Touch Circle
On/Off
Long press to turn
the tone on/off
Mode Key
White Key
Press to turn on/off the white LED’s.
Long press to change the brightness
The Changing Mode (Press Mode Key to switch)
86mm
A.
B. C. D. E. F. 86mm
Static Red
Static Green
Static Blue
Static Yellow
Static Purple
Static Cyan
G. Static White
H. RGB Jumping
I. 7 Colours Jumping
J. RGB Smooth
K. 7 Colours Smooth
L. Static Black (only close RGB)
36mm
0800 952 000 | www.brightlight.co.nz | BRIGHTLIGHT
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising